[PATCH 09/11] w35und: reformat wbusb.c

From: Pekka Enberg
Date: Wed Apr 08 2009 - 04:20:09 EST


Impact: cleanup

Use scripts/Lindent on the file and clean up the rest by hand.

Cc: Pavel Machek <pavel@xxxxxx>
Signed-off-by: Pekka Enberg <penberg@xxxxxxxxxxxxxx>
---
drivers/staging/winbond/wbusb.c | 563 +++++++++++++++++++--------------------
1 files changed, 270 insertions(+), 293 deletions(-)

diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 742bf7d..526aac5 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -19,13 +19,13 @@ MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");

static struct usb_device_id wb35_table[] __devinitdata = {
- {USB_DEVICE(0x0416, 0x0035)},
- {USB_DEVICE(0x18E8, 0x6201)},
- {USB_DEVICE(0x18E8, 0x6206)},
- {USB_DEVICE(0x18E8, 0x6217)},
- {USB_DEVICE(0x18E8, 0x6230)},
- {USB_DEVICE(0x18E8, 0x6233)},
- {USB_DEVICE(0x1131, 0x2035)},
+ { USB_DEVICE(0x0416, 0x0035) },
+ { USB_DEVICE(0x18E8, 0x6201) },
+ { USB_DEVICE(0x18E8, 0x6206) },
+ { USB_DEVICE(0x18E8, 0x6217) },
+ { USB_DEVICE(0x18E8, 0x6230) },
+ { USB_DEVICE(0x18E8, 0x6233) },
+ { USB_DEVICE(0x1131, 0x2035) },
{ 0, }
};

@@ -36,7 +36,7 @@ static struct ieee80211_rate wbsoft_rates[] = {
};

static struct ieee80211_channel wbsoft_channels[] = {
- { .center_freq = 2412},
+ { .center_freq = 2412 },
};

static struct ieee80211_supported_band wbsoft_band_2GHz = {
@@ -47,14 +47,14 @@ static struct ieee80211_supported_band wbsoft_band_2GHz = {
};

static int wbsoft_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_if_init_conf *conf)
{
printk("wbsoft_add interface called\n");
return 0;
}

static void wbsoft_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_if_init_conf *conf)
{
printk("wbsoft_remove interface called\n");
}
@@ -79,9 +79,9 @@ static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
}

static void wbsoft_configure_filter(struct ieee80211_hw *dev,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count, struct dev_mc_list *mclist)
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count, struct dev_mc_list *mclist)
{
unsigned int new_flags;

@@ -106,7 +106,6 @@ static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
return NETDEV_TX_OK;
}

-
static int wbsoft_start(struct ieee80211_hw *dev)
{
struct wbsoft_priv *priv = dev->priv;
@@ -131,17 +130,17 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
hal_set_current_channel(&priv->sHwData, ch);
hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
hal_set_accept_broadcast(&priv->sHwData, 1);
- hal_set_accept_promiscuous(&priv->sHwData, 1);
- hal_set_accept_multicast(&priv->sHwData, 1);
- hal_set_accept_beacon(&priv->sHwData, 1);
- hal_set_radio_mode(&priv->sHwData, 0);
+ hal_set_accept_promiscuous(&priv->sHwData, 1);
+ hal_set_accept_multicast(&priv->sHwData, 1);
+ hal_set_accept_beacon(&priv->sHwData, 1);
+ hal_set_radio_mode(&priv->sHwData, 0);

return 0;
}

static int wbsoft_config_interface(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf)
{
printk("wbsoft_config_interface called\n");
return 0;
@@ -169,285 +168,256 @@ static const struct ieee80211_ops wbsoft_ops = {

static void hal_led_control(unsigned long data)
{
- struct wbsoft_priv *adapter = (struct wbsoft_priv *) data;
- struct hw_data * pHwData = &adapter->sHwData;
+ struct wbsoft_priv *adapter = (struct wbsoft_priv *)data;
+ struct hw_data *pHwData = &adapter->sHwData;
struct wb35_reg *reg = &pHwData->reg;
- u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
- u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
- u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
- u32 TimeInterval = 500, ltmp, ltmp2;
- ltmp=0;
+ u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
+ u8 LEDgray[20] = { 0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2 };
+ u8 LEDgray2[30] = { 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 14, 13, 12, 11, 10, 9, 8 };
+ u32 TimeInterval = 500, ltmp, ltmp2;
+ ltmp = 0;

- if( pHwData->SurpriseRemove ) return;
+ if (pHwData->SurpriseRemove)
+ return;

- if( pHwData->LED_control ) {
+ if (pHwData->LED_control) {
ltmp2 = pHwData->LED_control & 0xff;
- if( ltmp2 == 5 ) // 5 is WPS mode
+ if (ltmp2 == 5) // 5 is WPS mode
{
TimeInterval = 100;
- ltmp2 = (pHwData->LED_control>>8) & 0xff;
- switch( ltmp2 )
- {
- case 1: // [0.2 On][0.1 Off]...
- pHwData->LED_Blinking %= 3;
- ltmp = 0x1010; // Led 1 & 0 Green and Red
- if( pHwData->LED_Blinking == 2 ) // Turn off
- ltmp = 0;
- break;
- case 2: // [0.1 On][0.1 Off]...
- pHwData->LED_Blinking %= 2;
- ltmp = 0x0010; // Led 0 red color
- if( pHwData->LED_Blinking ) // Turn off
- ltmp = 0;
- break;
- case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
- pHwData->LED_Blinking %= 15;
- ltmp = 0x0010; // Led 0 red color
- if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
- ltmp = 0;
- break;
- case 4: // [300 On][ off ]
- ltmp = 0x1000; // Led 1 Green color
- if( pHwData->LED_Blinking >= 3000 )
- ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
- break;
+ ltmp2 = (pHwData->LED_control >> 8) & 0xff;
+ switch (ltmp2) {
+ case 1: // [0.2 On][0.1 Off]...
+ pHwData->LED_Blinking %= 3;
+ ltmp = 0x1010; // Led 1 & 0 Green and Red
+ if (pHwData->LED_Blinking == 2) // Turn off
+ ltmp = 0;
+ break;
+ case 2: // [0.1 On][0.1 Off]...
+ pHwData->LED_Blinking %= 2;
+ ltmp = 0x0010; // Led 0 red color
+ if (pHwData->LED_Blinking) // Turn off
+ ltmp = 0;
+ break;
+ case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
+ pHwData->LED_Blinking %= 15;
+ ltmp = 0x0010; // Led 0 red color
+ if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) // Turn off 0.6 sec
+ ltmp = 0;
+ break;
+ case 4: // [300 On][ off ]
+ ltmp = 0x1000; // Led 1 Green color
+ if (pHwData->LED_Blinking >= 3000)
+ ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
+ break;
}
pHwData->LED_Blinking++;

reg->U1BC_LEDConfigure = ltmp;
- if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
+ if (LEDSet != 7) // Only 111 mode has 2 LEDs on PCB.
{
- reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
- reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
+ reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; // Copy LED result to each LED control register
+ reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
}
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
}
- }
- else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
+ } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) // If radio off
{
- if( reg->U1BC_LEDConfigure & 0x1010 )
- {
+ if (reg->U1BC_LEDConfigure & 0x1010) {
reg->U1BC_LEDConfigure &= ~0x1010;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
}
- }
- else
- {
- switch( LEDSet )
- {
- case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
+ } else {
+ switch (LEDSet) {
+ case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+ if (!pHwData->LED_LinkOn) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if (pHwData->LED_Scanning) {
+ if (pHwData->LED_Blinking == 0) {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ } else {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
}
- else
- {
- //Turn Off LED_0
- if( reg->U1BC_LEDConfigure & 0x10 )
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
+ } else {
+ //Turn Off LED_0
+ if (reg->U1BC_LEDConfigure & 0x10) {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
}
}
- else
- {
- // Turn On LED_0
- if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
+ } else {
+ // Turn On LED_0
+ if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
}
- break;
+ }
+ break;

- case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure &= ~0xf;
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x1f;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- // 20060901 Gray blinking if in disconnect state and not scanning
- ltmp = reg->U1BC_LEDConfigure;
+ case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+ if (!pHwData->LED_LinkOn) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if (pHwData->LED_Scanning) {
+ if (pHwData->LED_Blinking == 0) {
+ reg->U1BC_LEDConfigure &= ~0xf;
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ } else {
reg->U1BC_LEDConfigure &= ~0x1f;
- if( LEDgray2[(pHwData->LED_Blinking%30)] )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
- }
- pHwData->LED_Blinking++;
- if( reg->U1BC_LEDConfigure != ltmp )
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- TimeInterval = 100;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
}
- }
- else
- {
- // Turn On LED_0
- if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
- {
+ } else {
+ // 20060901 Gray blinking if in disconnect state and not scanning
+ ltmp = reg->U1BC_LEDConfigure;
+ reg->U1BC_LEDConfigure &= ~0x1f;
+ if (LEDgray2[(pHwData->LED_Blinking % 30)]) {
reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ reg->U1BC_LEDConfigure |=
+ LEDgray2[(pHwData->LED_Blinking % 30)];
}
+ pHwData->LED_Blinking++;
+ if (reg->U1BC_LEDConfigure != ltmp)
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+ TimeInterval = 100;
}
- break;
+ } else {
+ // Turn On LED_0
+ if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+ }
+ }
+ break;

- case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
+ case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
+ if (!pHwData->LED_LinkOn) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if (pHwData->LED_Scanning) {
+ if (pHwData->LED_Blinking == 0) {
+ reg->U1BC_LEDConfigure |=
+ 0x1000;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ } else {
+ reg->U1BC_LEDConfigure &=
+ ~0x1000;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
}
- else
- {
- //Turn Off LED_1
- if( reg->U1BC_LEDConfigure & 0x1000 )
- {
- reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
- }
+ } else {
+ //Turn Off LED_1
+ if (reg->U1BC_LEDConfigure & 0x1000) {
+ reg->U1BC_LEDConfigure &=
+ ~0x1000;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
}
}
- else
- {
- // Is transmitting/receiving ??
- if( (adapter->RxByteCount != pHwData->RxByteCountLast ) ||
- (adapter->TxByteCount != pHwData->TxByteCountLast ) )
- {
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
- {
- reg->U1BC_LEDConfigure |= 0x3000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- }
-
- // Update variable
- pHwData->RxByteCountLast = adapter->RxByteCount;
- pHwData->TxByteCountLast = adapter->TxByteCount;
- TimeInterval = 200;
+ } else {
+ // Is transmitting/receiving ??
+ if ((adapter->RxByteCount !=
+ pHwData->RxByteCountLast)
+ || (adapter->TxByteCount !=
+ pHwData->TxByteCountLast)) {
+ if ((reg->U1BC_LEDConfigure & 0x3000) !=
+ 0x3000) {
+ reg->U1BC_LEDConfigure |=
+ 0x3000;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
}
- else
- {
- // Turn On LED_1 and blinking if transmitting/receiving
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
- {
- reg->U1BC_LEDConfigure &= ~0x3000;
- reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- }
+ // Update variable
+ pHwData->RxByteCountLast =
+ adapter->RxByteCount;
+ pHwData->TxByteCountLast =
+ adapter->TxByteCount;
+ TimeInterval = 200;
+ } else {
+ // Turn On LED_1 and blinking if transmitting/receiving
+ if ((reg->U1BC_LEDConfigure & 0x3000) !=
+ 0x1000) {
+ reg->U1BC_LEDConfigure &=
+ ~0x3000;
+ reg->U1BC_LEDConfigure |=
+ 0x1000;
+ Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
}
}
- break;
+ }
+ break;

- default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
- {
- reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
+ default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
+ if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
+ reg->U1BC_LEDConfigure |= 0x3000; // LED_1 is always on and event enable
+ Wb35Reg_Write(pHwData, 0x03bc,
+ reg->U1BC_LEDConfigure);
+ }

- if( pHwData->LED_Blinking )
- {
- // Gray blinking
+ if (pHwData->LED_Blinking) {
+ // Gray blinking
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |=
+ LEDgray[(pHwData->LED_Blinking - 1) % 20];
+ Wb35Reg_Write(pHwData, 0x03bc,
+ reg->U1BC_LEDConfigure);
+
+ pHwData->LED_Blinking += 2;
+ if (pHwData->LED_Blinking < 40)
+ TimeInterval = 100;
+ else {
+ pHwData->LED_Blinking = 0; // Stop blinking
reg->U1BC_LEDConfigure &= ~0x0f;
- reg->U1BC_LEDConfigure |= 0x10;
- reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-
- pHwData->LED_Blinking += 2;
- if( pHwData->LED_Blinking < 40 )
- TimeInterval = 100;
- else
- {
- pHwData->LED_Blinking = 0; // Stop blinking
- reg->U1BC_LEDConfigure &= ~0x0f;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- break;
+ Wb35Reg_Write(pHwData, 0x03bc,
+ reg->U1BC_LEDConfigure);
}
+ break;
+ }

- if( pHwData->LED_LinkOn )
+ if (pHwData->LED_LinkOn) {
+ if (!(reg->U1BC_LEDConfigure & 0x10)) // Check the LED_0
{
- if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
- {
- //Try to turn ON LED_0 after gray blinking
- reg->U1BC_LEDConfigure |= 0x10;
- pHwData->LED_Blinking = 1; //Start blinking
- TimeInterval = 50;
- }
+ //Try to turn ON LED_0 after gray blinking
+ reg->U1BC_LEDConfigure |= 0x10;
+ pHwData->LED_Blinking = 1; //Start blinking
+ TimeInterval = 50;
}
- else
+ } else {
+ if (reg->U1BC_LEDConfigure & 0x10) // Check the LED_0
{
- if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write(pHwData, 0x03bc,
+ reg->U1BC_LEDConfigure);
}
- break;
+ }
+ break;
}

//20060828.1 Active send null packet to avoid AP disconnect
- if( pHwData->LED_LinkOn )
- {
+ if (pHwData->LED_LinkOn) {
pHwData->NullPacketCount += TimeInterval;
- if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
- {
+ if (pHwData->NullPacketCount >=
+ DEFAULT_NULL_PACKET_COUNT) {
pHwData->NullPacketCount = 0;
}
}
}

pHwData->time_count += TimeInterval;
- Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
+ Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
add_timer(&pHwData->LEDTimer);
}
@@ -455,7 +425,7 @@ static void hal_led_control(unsigned long data)
static int hal_init_hardware(struct ieee80211_hw *hw)
{
struct wbsoft_priv *priv = hw->priv;
- struct hw_data * pHwData = &priv->sHwData;
+ struct hw_data *pHwData = &priv->sHwData;
u16 SoftwareSet;

pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME;
@@ -472,18 +442,18 @@ static int hal_init_hardware(struct ieee80211_hw *hw)

init_timer(&pHwData->LEDTimer);
pHwData->LEDTimer.function = hal_led_control;
- pHwData->LEDTimer.data = (unsigned long) priv;
+ pHwData->LEDTimer.data = (unsigned long)priv;
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
add_timer(&pHwData->LEDTimer);

- SoftwareSet = hal_software_set( pHwData );
+ SoftwareSet = hal_software_set(pHwData);

- #ifdef Vendor2
+#ifdef Vendor2
// Try to make sure the EEPROM contain
SoftwareSet >>= 8;
- if( SoftwareSet != 0x82 )
+ if (SoftwareSet != 0x82)
return false;
- #endif
+#endif

Wb35Rx_start(hw);
Wb35Tx_EP2VM_start(priv);
@@ -504,40 +474,41 @@ error_reg_destroy:
static int wb35_hw_init(struct ieee80211_hw *hw)
{
struct wbsoft_priv *priv = hw->priv;
- struct hw_data * pHwData = &priv->sHwData;
- u8 *pMacAddr;
- u8 *pMacAddr2;
- u8 EEPROM_region;
- u8 HwRadioOff;
+ struct hw_data *pHwData = &priv->sHwData;
+ u8 EEPROM_region;
+ u8 HwRadioOff;
+ u8 *pMacAddr2;
+ u8 *pMacAddr;
int err;

- priv->sLocalPara.region_INF = REGION_AUTO;
- priv->sLocalPara.TxRateMode = RATE_AUTO;
- priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;
- priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
- priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
- priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
- priv->sLocalPara.bPreambleMode = AUTO_MODE;
- priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
-
pHwData->phy_type = RF_DECIDE_BY_INF;

- priv->sLocalPara.bWepKeyError= false;
- priv->sLocalPara.bToSelfPacketReceived = false;
- priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /* 2 seconds */
+ priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
+ priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+
+ priv->sLocalPara.region_INF = REGION_AUTO;
+ priv->sLocalPara.TxRateMode = RATE_AUTO;
+ priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;
+ priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
+ priv->sLocalPara.bPreambleMode = AUTO_MODE;
+ priv->sLocalPara.bWepKeyError = false;
+ priv->sLocalPara.bToSelfPacketReceived = false;
+ priv->sLocalPara.WepKeyDetectTimerCount = 2 * 100; /* 2 seconds */
+
+ priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;

err = hal_init_hardware(hw);
if (err)
goto error;

- EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+ EEPROM_region = hal_get_region_from_EEPROM(pHwData);
if (EEPROM_region != REGION_AUTO)
priv->sLocalPara.region = EEPROM_region;
else {
if (priv->sLocalPara.region_INF != REGION_AUTO)
priv->sLocalPara.region = priv->sLocalPara.region_INF;
else
- priv->sLocalPara.region = REGION_USA; /* default setting */
+ priv->sLocalPara.region = REGION_USA; /* default setting */
}

// Get Software setting flag from hal
@@ -555,19 +526,20 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
pMacAddr2 = priv->sLocalPara.PermanentAddress;

/* Reading ethernet address from EEPROM */
- hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );
+ hal_get_permanent_address(pHwData, priv->sLocalPara.PermanentAddress);
if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
else {
/* Set the user define MAC address */
- hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
+ hal_set_ethernet_address(pHwData,
+ priv->sLocalPara.ThisMacAddress);
}

priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
- hal_get_hw_radio_off( pHwData );
+ hal_get_hw_radio_off(pHwData);

/* Waiting for HAL setting OK */
while (!hal_idle(pHwData))
@@ -575,10 +547,14 @@ static int wb35_hw_init(struct ieee80211_hw *hw)

MTO_Init(priv);

- HwRadioOff = hal_get_hw_radio_off( pHwData );
+ HwRadioOff = hal_get_hw_radio_off(pHwData);
priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;

- hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
+ hal_set_radio_mode(pHwData,
+ (unsigned char)(priv->sLocalPara.RadioOffStatus.
+ boSwRadioOff
+ || priv->sLocalPara.RadioOffStatus.
+ boHwRadioOff));

/* Notify hal that the driver is ready now. */
hal_driver_init_OK(pHwData) = 1;
@@ -587,23 +563,25 @@ error:
return err;
}

-static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
+static int wb35_probe(struct usb_interface *intf,
+ const struct usb_device_id *id_table)
{
- struct wb_usb *pWbUsb;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- u32 ltmp;
struct usb_device *udev = interface_to_usbdev(intf);
- struct wbsoft_priv *priv;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_host_interface *interface;
struct ieee80211_hw *dev;
+ struct wbsoft_priv *priv;
+ struct wb_usb *pWbUsb;
int nr, err;
+ u32 ltmp;

usb_get_dev(udev);

/* Check the device if it already be opened */
- nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
- 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
- 0x0, 0x400, &ltmp, 4, HZ*100 );
+ nr = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ 0x01,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x0, 0x400, &ltmp, 4, HZ * 100);
if (nr < 0) {
err = nr;
goto error;
@@ -629,8 +607,8 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
pWbUsb = &priv->sHwData.WbUsb;
pWbUsb->udev = udev;

- interface = intf->cur_altsetting;
- endpoint = &interface->endpoint[0].desc;
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;

if (endpoint[2].wMaxPacketSize == 512) {
printk("[w35und] Working on USB 2.0\n");
@@ -643,8 +621,8 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id

SET_IEEE80211_DEV(dev, &udev->dev);
{
- struct hw_data * pHwData = &priv->sHwData;
- unsigned char dev_addr[MAX_ADDR_LEN];
+ struct hw_data *pHwData = &priv->sHwData;
+ unsigned char dev_addr[MAX_ADDR_LEN];
hal_get_permanent_address(pHwData, dev_addr);
SET_IEEE80211_PERM_ADDR(dev, dev_addr);
}
@@ -686,10 +664,10 @@ static void hal_halt(struct hw_data *pHwData)

static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
- Mds_Destroy( adapter );
+ Mds_Destroy(adapter);

/* Turn off Rx and Tx hardware ability */
- hal_stop( &adapter->sHwData );
+ hal_stop(&adapter->sHwData);
#ifdef _PE_USB_INI_DUMP_
printk("[w35und] Hal_stop O.K.\n");
#endif
@@ -699,7 +677,6 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
hal_halt(&adapter->sHwData);
}

-
static void wb35_disconnect(struct usb_interface *intf)
{
struct wbsoft_priv *priv = usb_get_intfdata(intf);
--
1.5.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/