usbtouchscreen: eGalax (clone?) not being ignored by the usbtouchscreen driver

[Nuno Lucas]

In a recent patch [1], Daniel Ritz added
USB_DEVICE_ID_MATCH_INT_PROTOCOL for the "match_flags" of the
USB_DEVICE_HID_CLASS macro, but I have another "eGalax" controller
with the same USB properties but that needs to be handled by the
usbhid driver.

My "/proc/bus/usb/devices" part:

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0eef ProdID=0001 Rev= 1.00
S:  Manufacturer=eGalax Inc.
S:  Product=Touch
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

If I remove the USB_DEVICE_ID_MATCH_INT_PROTOCOL then the
usbtouchscreen driver ignores the device and usbhid takes over as it
should be. But with the current code, usbtouchscreen claims the device
and as it doesn't understand the protocol makes the device unusable.

The device mentioned on the thread that needs the usbtouchscreen
driver was this:

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0eef ProdID=0001 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=5ms

It seems the eGalax USB ID (0eef:0001) is being (ab)used by a lot of
different manufacturers, but shouldn't the default be to let the
usbhid driver to decide if it can or not use the device if the device
class is HID? All other "eGalax" devices I have seen that really need
the usbtouchscreen driver have the 0xff class, like the one below:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0eef ProdID=0001 Rev= 1.00
S:  Manufacturer=eGalax Inc.
S:  Product=USB TouchController
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbtouchscreen
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=5ms

If there are devices that need to use usbtouchscreen and have the HID
class then, in my view, are plain broken. Maybe the solution would be
to somehow allow the user to re-attach the device to a different
driver.

As I'm no kernel programmer, anyone care to comment?


Regards,
~Nuno Lucas

[1] http://lkml.org/lkml/2009/2/8/70
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/