Re: [PATCH] block_write_full_page: switch synchronous writes to use WRITE_SYNC_PLUG

From: Andrew Morton
Date: Wed Apr 08 2009 - 18:38:01 EST


On Wed, 8 Apr 2009 10:08:44 +0200 Jens Axboe <jens.axboe@xxxxxxxxxx> wrote:

> > So how does WRITE_SYNC_PLUG differ from WRITE, and what effect does
> > this change have upon kernel behaviour?
>
> How about something like this. Comments welcome.

It's lovely.

> Should we move this to
> a dedicated header file? fs.h is amazingly cluttered as it is.

Sometime, perhaps.

> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index 562d285..6b6597a 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -87,6 +87,57 @@ struct inodes_stat_t {
> */
> #define FMODE_NOCMTIME ((__force fmode_t)2048)
>
> +/*
> + * The below are the various read and write types that we support. Some of
> + * them include behavioral modifiers that send information down to the
> + * block layer and IO scheduler. Terminology:
> + *
> + * The block layer uses device plugging to defer IO a little bit, in
> + * the hope that we will see more IO very shortly. This increases
> + * coalescing of adjacent IO and thus reduces the number of IOs we
> + * have to send to the device. It also allows for better queuing,
> + * if the IO isn't mergeable. If the caller is going to be waiting
> + * for the IO, then he must ensure that the device is unplugged so
> + * that the IO is dispatched to the driver.
> + *
> + * All IO is handled async in Linux. This is fine for background
> + * writes, but for reads or writes that someone waits for completion
> + * on, we want to notify the block layer and IO scheduler so that they
> + * know about it. That allows them to make better scheduling
> + * decisions. So when the below references 'sync' and 'async', it
> + * is referencing this priority hint.
> + *
> + * With that in mind, the available types are:
> + *
> + * READ A normal read operation. Device will be plugged.
> + * READ_SYNC A synchronous read. Device is not plugged, caller can
> + * immediately wait on this read without caring about
> + * unplugging.
> + * READA Used for read-ahead operations. Lower priority, and the
> + * block layer could (in theory) choose to ignore this
> + * request if it runs into resource problems.
> + * WRITE A normal async write. Device will be plugged.
> + * SWRITE Like WRITE, but a special case for ll_rw_block() that
> + * tells it to lock the buffer first. Normally a buffer
> + * must be locked before doing IO.
> + * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down
> + * the hint that someone will be waiting on this IO
> + * shortly.

>From the text, I'd expect WRITE_SYNC_PLUG to, err, unplug!

> + * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device
> + * immediately after submission. The write equivalent
> + * of READ_SYNC.

But this contradicts my expectation.

So what does WRITE_SYNC_PLUG really do dofferent from WRITE?

> + * WRITE_ODIRECT Special case write for O_DIRECT only.
> + * SWRITE_SYNC
> + * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
> + * See SWRITE.
> + * WRITE_BARRIER Like WRITE, but tells the block layer that all
> + * previously submitted writes must be safely on storage
> + * before this one is started. Also guarantees that when
> + * this write is complete, it itself is also safely on
> + * storage. Prevents reordering of writes on both sides
> + * of this IO.
> + *
> + */
> #define RW_MASK 1
> #define RWA_MASK 2
> #define READ 0
> @@ -102,6 +153,11 @@ struct inodes_stat_t {
> (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
> #define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
> #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
> +
> +/*
> + * These aren't really reads or writes, they pass down information about
> + * parts of device that are now unused by the file system.
> + */
> #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
> #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/