Re: [PATCH 3/3] [BUGFIX] x86/x86_64: fix IRQ migration triggeredactive device IRQ interrruption

From: Gary Hade
Date: Fri Apr 10 2009 - 17:40:06 EST


On Wed, Apr 08, 2009 at 03:03:49PM -0700, Yinghai Lu wrote:
> On Wed, Apr 8, 2009 at 2:07 PM, Gary Hade <garyhade@xxxxxxxxxx> wrote:
> > Impact: Eliminates an issue that can leave the system in an
> >        unusable state.
> >
> > This patch addresses an issue where device generated IRQs
> > are no longer seen by the kernel following IRQ affinity
> > migration while the device is generating IRQs at a high rate.
> > We have seen this problem happen when IRQ affinities are
> > adjusted in response to CPU offlining but I believe it
> > could also happen in during user initiated IRQ affinity
> > changes unrelated to CPU offlining. e.g. while the
> > irqbalance daemon is adjusting IRQ affinities when the
> > system is heavily loaded.
> >
> > I have been able to consistently reproduce the problem on
> > some of our systems by running the following script (VICTIM_IRQ
> > specifies the IRQ for the aic94xx device) while a single instance
> > of the command
> >  # while true; do find / -exec file {} \;; done
> > is keeping the filesystem activity and IRQ rate reasonably high.
> >
> > #!/bin/sh
> >
> > SYS_CPU_DIR=/sys/devices/system/cpu
> > VICTIM_IRQ=25
> > IRQ_MASK=f0
> >
> > iteration=0
> > while true; do
> >  echo $iteration
> >  echo $IRQ_MASK > /proc/irq/$VICTIM_IRQ/smp_affinity
> >  for cpudir in $SYS_CPU_DIR/cpu[1-9] $SYS_CPU_DIR/cpu??; do
> >    echo 0 > $cpudir/online
> >  done
> >  for cpudir in $SYS_CPU_DIR/cpu[1-9] $SYS_CPU_DIR/cpu??; do
> >    echo 1 > $cpudir/online
> >  done
> >  iteration=`expr $iteration + 1`
> > done
> >
> > The root cause is a known issue already addressed for some
> > code paths [e.g. ack_apic_level() and the now obsolete
> > migrate_irq_remapped_level_desc()] where the ioapic can
> > misbehave when the I/O redirection table register is written
> > while the Remote IRR bit is set.
> >
> > The proposed fix uses the same avoidance method and much
> > of same code that the Interrupt Remapping code previously
> > used to avoid the same problem.
> >
> > Signed-off-by: Gary Hade <garyhade@xxxxxxxxxx>
> >
> > ---
> >  arch/x86/kernel/apic/io_apic.c |   72 ++++++++++++++++++++++++++++++-
> >  1 file changed, 71 insertions(+), 1 deletion(-)
> >
> > Index: linux-2.6.30-rc1/arch/x86/kernel/apic/io_apic.c
> > ===================================================================
> > --- linux-2.6.30-rc1.orig/arch/x86/kernel/apic/io_apic.c        2009-04-08 09:24:11.000000000 -0700
> > +++ linux-2.6.30-rc1/arch/x86/kernel/apic/io_apic.c     2009-04-08 09:24:23.000000000 -0700
> > @@ -2331,7 +2331,8 @@ set_desc_affinity(struct irq_desc *desc,
> >  }
> >
> >  static void
> > -set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
> > +set_ioapic_irq_affinity_desc(struct irq_desc *desc,
> > +                            const struct cpumask *mask)
> >  {
> >        struct irq_cfg *cfg;
> >        unsigned long flags;
> > @@ -2352,6 +2353,75 @@ set_ioapic_affinity_irq_desc(struct irq_
> >  }
> >
> >  static void
> > +delayed_irq_move(struct work_struct *work)
> > +{
> > +       unsigned int irq;
> > +       struct irq_desc *desc;
> > +
> > +       for_each_irq_desc(irq, desc) {
> > +               if (desc->status & IRQ_MOVE_PENDING) {
> > +                       unsigned long flags;
> > +
> > +                       spin_lock_irqsave(&desc->lock, flags);
> > +                       if (!desc->chip->set_affinity ||
> > +                           !(desc->status & IRQ_MOVE_PENDING)) {
> > +                               desc->status &= ~IRQ_MOVE_PENDING;
> > +                               spin_unlock_irqrestore(&desc->lock, flags);
> > +                               continue;
> > +                       }
> > +
> > +                       desc->chip->set_affinity(irq, desc->pending_mask);
> > +                       spin_unlock_irqrestore(&desc->lock, flags);
> > +               }
> > +       }
> > +}
> > +
> > +static DECLARE_DELAYED_WORK(delayed_irq_move_work, delayed_irq_move);
> > +
> > +static void
> > +set_ioapic_irq_affinity_level_desc(struct irq_desc *desc)
> > +{
> > +
> > +       struct irq_cfg *cfg = desc->chip_data;
> > +
> > +       mask_IO_APIC_irq_desc(desc);
> > +
> > +       if (io_apic_level_ack_pending(cfg)) {
> > +               /*
> > +                * Interrupt in progress. Migrating irq now will change
> > +                * the vector information in the IO-APIC RTE which will
> > +                * confuse the EOI broadcast performed by cpu.
> > +                * So, we delay the irq migration.
> > +                */
> > +               schedule_delayed_work(&delayed_irq_move_work, 1);
> > +               goto unmask;
> > +       }
> > +
> > +       /* Interrupt not in progress. we can change the vector
> > +        * information in the IO-APIC RTE. */
> > +       set_ioapic_irq_affinity_desc(desc, desc->pending_mask);
> > +
> > +       desc->status &= ~IRQ_MOVE_PENDING;
> > +       cpumask_clear(desc->pending_mask);
> > +
> > +unmask:
> > +       unmask_IO_APIC_irq_desc(desc);
> > +}
> > +
> > +static void
> > +set_ioapic_affinity_irq_desc(struct irq_desc *desc,
> > +                            const struct cpumask *mask)
> > +{
> > +       if (desc->status & IRQ_LEVEL) {
> > +               desc->status |= IRQ_MOVE_PENDING;
> > +               cpumask_copy(desc->pending_mask, mask);
> > +               set_ioapic_irq_affinity_level_desc(desc);
> > +               return;
> > +       }
> > +       set_ioapic_irq_affinity_desc(desc, mask);
> > +}
> > +
> > +static void
> >  set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
> >  {
> >        struct irq_desc *desc;
> > --
>
> it seems, ack_apic_level() already checked io_apic_level_ack_pending()
>
> cfg = desc->chip_data;
> if (!io_apic_level_ack_pending(cfg))
> move_masked_irq(irq);
> unmask_IO_APIC_irq_desc(desc);
>
> also calling path without irremap - for level triggered.
> 1. user use /proc/irq/xx/smp_affinity to set affinity
> 2. kernel/irq/manager.c::irq_set_affinity() is called, and
> desc->pending_mask is changed
> 3a. one irq is arrived: arch/x86/kernel/irq.c::do_IRQ() is called,
> hand_irq==>desc->handle_irq
> ==>kernel/irq/chip.c::handle_fasteoi_irq() ==> call desc->chip->eoi()
> 3b. desc->chip->eoi() aka
> arch/x86/kernel/apic/io_apic.c::ack_apic_level() will call
> mask_IO_APIC_irq_desc() and kernel/irq/migration.c::move_masked_irq()
> 3c. move_masked_irq will call desc->set_affinity(), vector and target
> in io_apic controller and IDT are changed
> desc->affinity is changed at last. ( for desc moving,
> move_in_progress and extra_move flag is set too.)
> 3d then ack_apic_level() will unmask the irq.
> 3e. finished other call in handle_fasteoi_irq()

I considered possible conflicts between my proposed changes
and this code path before I posted the patch. I had concluded
that they should play well together but your comment caused me
to take a much more detailed look at this code. The additional
review (some detail included below) and my testing have not
uncovered anything of concern but please let me know if you
(or anyone else that is listening) see a something that I may
have overlooked.

move_masked_irq() clears the IRQ_MOVE_PENDING desc->status
bit before calling the function pointed to by
desc->chip->set_affinity [e.g. set_ioapic_affinity_irq()]
AND the content of desc->pending_mask is not used after
cpumask_and(desc->affinity, desc->pending_mask, cpu_online_mask);
which precedes the set_affinity function call. So, I believe
this provides the necessary separation between the
IRQ_MOVE_PENDING/desc->pending_mask useage in move_masked_irq()
and the IRQ_MOVE_PENDING/desc->pending_mask useage in the code
that the patch adds.

One interesting observation is that since the IRQ remains
masked from before the io_apic_level_ack_pending() check in
ack_apic_level() until after the set_affinity function call
returns it seems that my speculation in the patch header
that the problem could happen when an IRQ affinity change is
requested from user level on a heavily loaded system is very
likely incorrect.

Thanks,
Gary

--
Gary Hade
System x Enablement
IBM Linux Technology Center
503-578-4503 IBM T/L: 775-4503
garyhade@xxxxxxxxxx
http://www.ibm.com/linux/ltc

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/