Re: BUG: using rootfstype=ext4 causes oops

[Andrew Price]

On Thu, Apr 16, 2009 at 10:53:57AM -0400, Theodore Tso wrote:
> OK, can you confirm that you tried using ext4 with either 2.6.29 or
> 2.6.28, and it was working previously?  That would make it a
> regression which Rafael would track.

I've tested this with a local GFS2 mount (which uses barriers too) and
the same bug occurs. Apologies for making it seem like an ext4 bug.  I'm
currently waiting for a kernel to build with Bartlomiej's patch so we'll
see how that goes.

> Also, I'd suggest sending Bartolmiej details about what IDE controller
> you have (the dmesg during a boot under ext3 or ext4 w/ barrier=0
> would also be useful), so he can track it down.  It might be specific
> to a particular IDE controller/device, and not be a generalized IDE
> problem, after all.

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Interrupt: pin A routed to IRQ 20
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
        Region 4: I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: VIA_IDE

> Anyway, I'll hand this bug off to Raefael's and/or Bartlomiej's very
> capable hands, since I suspect you could also reproduce this using
> rootfstype=ext3 rootfsflags=barrier=1, and that this is purely an IDE
> driver problem.

Thanks Ted.

> P.S.  Where in the documentation file do we have the mount option as
> "barriers=0".  I went looking for it, and I couldn't find it.  What I
> see is:
> <snip>

Further up in that file in the last paragraph of the 'Quick usage
instructions' it says:

[...]
'-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems
[...]

(I searched the file for barrier and it was the first chunk of text
which matched.)

--
Andrew Price
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/