Re: [Bug #13058] First hibernation attempt fails
From: Alan Jenkins
Date: Sat Apr 18 2009 - 04:11:44 EST
Linus Torvalds wrote:
On Fri, 17 Apr 2009, Rafael J. Wysocki wrote:
Can you please try to reproduce the problem with the appended debug patch
applied and send the output of dmesg to me?
Maybe something like this instead (or in addition to).
It does "show_mem()" when memory shrinking fails. It will show a _lot_ of
data.
Untested, but trivial.
Linus
---
Ok, I applied both your and Rafael's debug patches. dmesg attached.
After the failed hibernation, I noticed my touchpad wasn't working. But
I think that's something else. I had another go and couldn't reproduce
that. It's happened to me once before while testing 2.6.30-; I've also
had the keyboard stop working at least once. I'm hoping it's the same
bug as "20 ACPI interrupts per second on EEEPC" bug. It could be
overloading my bug-ridden EC, which also acts as the keyboard controller.
Thanks
Alan
[ 0.000000] Linux version 2.6.30-rc2eeepc (alan@alan-desktop) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #240 Sat Apr 18 08:47:04 BST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f780000 (usable)
[ 0.000000] BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved)
[ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1f780 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] init_memory_mapping: 0000000000000000-000000001f780000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 001f600000 page 2M
[ 0.000000] 001f600000 - 001f780000 page 4k
[ 0.000000] kernel direct mapping tables up to 1f780000 @ 10000-16000
[ 0.000000] RAMDISK: 17724000 - 179df533
[ 0.000000] ACPI: RSDP 000fbe50 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1f780000 00034 (v01 A M I OEMRSDT 03000911 MSFT 00000097)
[ 0.000000] ACPI: FACP 1f780200 00081 (v01 A M I OEMFACP 03000911 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1f780400 06069 (v01 A0797 A0797000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 1f790000 00040
[ 0.000000] ACPI: APIC 1f780390 00068 (v01 A M I OEMAPIC 03000911 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1f790040 00046 (v01 A M I AMI_OEM 03000911 MSFT 00000097)
[ 0.000000] ACPI: MCFG 1f786470 0003C (v01 A M I OEMMCFG 03000911 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f780000
[ 0.000000] low ram: 0 - 1f780000
[ 0.000000] node 0 low ram: 00000000 - 1f780000
[ 0.000000] node 0 bootmap 00012000 - 00015ef0
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001f780000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 00008ec0ac] TEXT DATA BSS ==> [0000100000 - 00008ec0ac]
[ 0.000000] #2 [0017724000 - 00179df533] RAMDISK ==> [0017724000 - 00179df533]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [00008ed000 - 00008f41f4] BRK ==> [00008ed000 - 00008f41f4]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #6 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f780
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f780
[ 0.000000] On node 0 totalpages: 128783
[ 0.000000] free_area_init_node: node 0, pgdat c043836c, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123825 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127776
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-rc2eeepc root=/dev/sda2 ro root=/dev/sda2 rootfstype=ext4 resume=/dev/sda2 resume_offset=9732
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:288
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 630.041 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 2847 kB
[ 0.003333] per task-struct memory footprint: 1152 bytes
[ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.003333] Memory: 499536k/515584k available (2045k kernel code, 15424k reserved, 1290k data, 248k init, 0k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
[ 0.003333] vmalloc : 0xdff80000 - 0xfffa8000 ( 512 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB)
[ 0.003333] .init : 0xc0446000 - 0xc0484000 ( 248 kB)
[ 0.003333] .data : 0xc02ff503 - 0xc04420a8 (1290 kB)
[ 0.003333] .text : 0xc0100000 - 0xc02ff503 (2045 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.003383] Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.58 BogoMIPS (lpj=2100136)
[ 0.003680] Mount-cache hash table entries: 512
[ 0.006328] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.006474] CPU: L2 cache: 512K
[ 0.006681] [ds] using Pentium M configuration
[ 0.006778] [ds] pebs not available
[ 0.006874] Intel machine check architecture supported.
[ 0.006978] Intel machine check reporting enabled on CPU#0.
[ 0.007093] CPU: Intel(R) Celeron(R) M processor 900MHz stepping 08
[ 0.007298] Checking 'hlt' instruction... OK.
[ 0.020678] ACPI: Core revision 20090320
[ 0.054619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089999] PM: Adding info for No Bus:platform
[ 0.089999] net_namespace: 1136 bytes
[ 0.091819] NET: Registered protocol family 16
[ 0.092936] PM: Adding info for No Bus:vtcon0
[ 0.093174] ACPI: bus type pci registered
[ 0.093492] PM: Adding info for No Bus:id
[ 0.093715] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.093827] PCI: Not using MMCONFIG.
[ 0.094216] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.094321] PCI: Using configuration type 1 for base access
[ 0.097919] PM: Adding info for No Bus:default
[ 0.098189] bio: create slab <bio-0> at 0
[ 0.120455] ACPI: EC: Look up EC in DSDT
[ 0.157798] ACPI: Interpreter enabled
[ 0.157918] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158404] ACPI: Using IOAPIC for interrupt routing
[ 0.158727] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.168936] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.169048] PCI: Using MMCONFIG for extended config space
[ 0.169477] PM: Adding info for acpi:LNXSYSTM:00
[ 0.169626] PM: Adding info for acpi:LNXPWRBN:00
[ 0.169822] PM: Adding info for acpi:ACPI_CPU:00
[ 0.170102] PM: Adding info for acpi:device:00
[ 0.170883] PM: Adding info for acpi:PNP0A08:00
[ 0.171147] PM: Adding info for acpi:PNP0C01:00
[ 0.172036] PM: Adding info for acpi:device:01
[ 0.172887] PM: Adding info for acpi:device:02
[ 0.173746] PM: Adding info for acpi:device:03
[ 0.174591] PM: Adding info for acpi:device:04
[ 0.175430] PM: Adding info for acpi:device:05
[ 0.175645] PM: Adding info for acpi:device:06
[ 0.175889] PM: Adding info for acpi:PNP0000:00
[ 0.176126] PM: Adding info for acpi:PNP0200:00
[ 0.176365] PM: Adding info for acpi:PNP0100:00
[ 0.176595] PM: Adding info for acpi:PNP0B00:00
[ 0.177248] PM: Adding info for acpi:PNP0303:00
[ 0.177887] PM: Adding info for acpi:SYN0A00:00
[ 0.178138] PM: Adding info for acpi:PNP0800:00
[ 0.178369] PM: Adding info for acpi:PNP0C04:00
[ 0.178642] PM: Adding info for acpi:PNP0C09:00
[ 0.179538] PM: Adding info for acpi:PNP0C02:00
[ 0.180313] PM: Adding info for acpi:PNP0C02:01
[ 0.180635] PM: Adding info for acpi:PNP0C02:02
[ 0.181419] PM: Adding info for acpi:PNP0C0A:00
[ 0.181728] PM: Adding info for acpi:ACPI0003:00
[ 0.181973] PM: Adding info for acpi:device:07
[ 0.182314] PM: Adding info for acpi:device:08
[ 0.182516] PM: Adding info for acpi:device:09
[ 0.182729] PM: Adding info for acpi:device:0a
[ 0.182938] PM: Adding info for acpi:device:0b
[ 0.183138] PM: Adding info for acpi:device:0c
[ 0.183359] PM: Adding info for acpi:device:0d
[ 0.184311] PM: Adding info for acpi:device:0e
[ 0.185157] PM: Adding info for acpi:device:0f
[ 0.186004] PM: Adding info for acpi:device:10
[ 0.186868] PM: Adding info for acpi:device:11
[ 0.187718] PM: Adding info for acpi:device:12
[ 0.188563] PM: Adding info for acpi:device:13
[ 0.188768] PM: Adding info for acpi:device:14
[ 0.188975] PM: Adding info for acpi:device:15
[ 0.189218] PM: Adding info for acpi:device:16
[ 0.189482] PM: Adding info for acpi:device:17
[ 0.189692] PM: Adding info for acpi:device:18
[ 0.189901] PM: Adding info for acpi:device:19
[ 0.190214] PM: Adding info for acpi:PNP0C02:03
[ 0.190461] PM: Adding info for acpi:PNP0C01:01
[ 0.190717] PM: Adding info for acpi:ASUS010:00
[ 0.191022] PM: Adding info for acpi:PNP0C0D:00
[ 0.191261] PM: Adding info for acpi:PNP0C0E:00
[ 0.191524] PM: Adding info for acpi:PNP0C0C:00
[ 0.192134] PM: Adding info for acpi:PNP0C0F:00
[ 0.192742] PM: Adding info for acpi:PNP0C0F:01
[ 0.193381] PM: Adding info for acpi:PNP0C0F:02
[ 0.193995] PM: Adding info for acpi:PNP0C0F:03
[ 0.194603] PM: Adding info for acpi:PNP0C0F:04
[ 0.195217] PM: Adding info for acpi:PNP0C0F:05
[ 0.195822] PM: Adding info for acpi:PNP0C0F:06
[ 0.196441] PM: Adding info for acpi:PNP0C0F:07
[ 0.196750] PM: Adding info for acpi:LNXTHERM:00
[ 0.196918] PM: Adding info for acpi:LNXTHERM:01
[ 0.198033] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.198143] ACPI: EC: driver started in poll mode
[ 0.199451] ACPI: No dock devices found.
[ 0.199837] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.200126] PM: Adding info for No Bus:pci0000:00
[ 0.200185] PM: Adding info for No Bus:0000:00
[ 0.200727] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[ 0.200750] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.200771] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.200792] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.200940] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[ 0.201254] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[ 0.201385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201498] pci 0000:00:1b.0: PME# disabled
[ 0.201765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201875] pci 0000:00:1c.0: PME# disabled
[ 0.202149] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.202258] pci 0000:00:1c.1: PME# disabled
[ 0.202530] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.202640] pci 0000:00:1c.2: PME# disabled
[ 0.202874] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.203025] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.203171] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.203357] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.203514] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.203656] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.203766] pci 0000:00:1d.7: PME# disabled
[ 0.204179] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.204200] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.204345] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.204456] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
[ 0.204654] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.204676] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.204697] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.204718] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.204739] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.204818] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.204923] pci 0000:00:1f.2: PME# disabled
[ 0.205133] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.205489] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.205568] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff]
[ 0.205660] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.205769] pci 0000:03:00.0: PME# disabled
[ 0.205986] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.206602] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.206781] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.206803] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.206953] pci 0000:00:1e.0: transparent bridge
[ 0.207127] pci_bus 0000:00: on NUMA node 0
[ 0.207163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.207966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.208205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.208423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.210386] PM: Adding info for pci:0000:00:00.0
[ 0.211916] PM: Adding info for pci:0000:00:02.0
[ 0.213433] PM: Adding info for pci:0000:00:02.1
[ 0.214949] PM: Adding info for pci:0000:00:1b.0
[ 0.216467] PM: Adding info for pci:0000:00:1c.0
[ 0.218010] PM: Adding info for pci:0000:00:1c.1
[ 0.219556] PM: Adding info for pci:0000:00:1c.2
[ 0.221113] PM: Adding info for pci:0000:00:1d.0
[ 0.222645] PM: Adding info for pci:0000:00:1d.1
[ 0.224187] PM: Adding info for pci:0000:00:1d.2
[ 0.225707] PM: Adding info for pci:0000:00:1d.3
[ 0.227255] PM: Adding info for pci:0000:00:1d.7
[ 0.228776] PM: Adding info for pci:0000:00:1e.0
[ 0.230327] PM: Adding info for pci:0000:00:1f.0
[ 0.231851] PM: Adding info for pci:0000:00:1f.2
[ 0.233389] PM: Adding info for pci:0000:00:1f.3
[ 0.233495] PM: Adding info for No Bus:0000:04
[ 0.233670] PM: Adding info for pci:0000:03:00.0
[ 0.233766] PM: Adding info for No Bus:0000:03
[ 0.233860] PM: Adding info for No Bus:0000:01
[ 0.233954] PM: Adding info for No Bus:0000:05
[ 0.234819] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.236014] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.237213] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.238398] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.239594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.240922] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.242230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.243558] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.245027] SCSI subsystem initialized
[ 0.261558] libata version 3.00 loaded.
[ 0.262173] PCI: Using ACPI for IRQ routing
[ 0.263385] PM: Adding info for No Bus:lo
[ 0.264418] hpet clockevent registered
[ 0.264428] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.264545] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.264828] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.271687] pnp: PnP ACPI init
[ 0.271877] PM: Adding info for No Bus:pnp0
[ 0.271893] ACPI: bus type pnp registered
[ 0.272885] PM: Adding info for pnp:00:00
[ 0.273212] PM: Adding info for pnp:00:01
[ 0.273611] PM: Adding info for pnp:00:02
[ 0.273858] PM: Adding info for pnp:00:03
[ 0.274294] PM: Adding info for pnp:00:04
[ 0.274900] PM: Adding info for pnp:00:05
[ 0.275125] PM: Adding info for pnp:00:06
[ 0.275354] PM: Adding info for pnp:00:07
[ 0.276366] PM: Adding info for pnp:00:08
[ 0.277396] PM: Adding info for pnp:00:09
[ 0.277961] PM: Adding info for pnp:00:0a
[ 0.278869] PM: Adding info for pnp:00:0b
[ 0.280118] PM: Adding info for pnp:00:0c
[ 0.281660] pnp: PnP ACPI: found 13 devices
[ 0.281760] ACPI: ACPI bus type pnp unregistered
[ 0.281908] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.282081] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.282191] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.284081] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.284193] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.284303] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.284415] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.284532] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.284697] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.284809] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.284941] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.285082] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.285216] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.285327] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.285439] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.285552] system 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved
[ 0.285848] PM: Adding info for No Bus:mem
[ 0.286031] PM: Adding info for No Bus:kmem
[ 0.286113] PM: Adding info for No Bus:null
[ 0.286192] PM: Adding info for No Bus:port
[ 0.286272] PM: Adding info for No Bus:zero
[ 0.286353] PM: Adding info for No Bus:full
[ 0.286432] PM: Adding info for No Bus:random
[ 0.286515] PM: Adding info for No Bus:urandom
[ 0.286596] PM: Adding info for No Bus:kmsg
[ 0.322170] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.322276] pci 0000:00:1c.0: IO window: disabled
[ 0.322384] pci 0000:00:1c.0: MEM window: disabled
[ 0.322488] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.322601] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.322703] pci 0000:00:1c.1: IO window: disabled
[ 0.322811] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.322920] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.323032] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[ 0.323135] pci 0000:00:1c.2: IO window: disabled
[ 0.323242] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff
[ 0.323365] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.323516] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.323620] pci 0000:00:1e.0: IO window: disabled
[ 0.323727] pci 0000:00:1e.0: MEM window: disabled
[ 0.323831] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.323975] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.324093] pci 0000:00:1c.0: setting latency timer to 64
[ 0.324122] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.324234] pci 0000:00:1c.1: setting latency timer to 64
[ 0.324265] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.324377] pci 0000:00:1c.2: setting latency timer to 64
[ 0.324401] pci 0000:00:1e.0: setting latency timer to 64
[ 0.324417] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.324428] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.324440] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.324449] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[ 0.324459] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.324468] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.324478] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.324488] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.324498] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.324508] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.324518] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.324528] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.324538] pci_bus 0000:01: resource 2 mem: [0xf0000000-0xf6ffffff]
[ 0.324548] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.324558] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
[ 0.324568] pci_bus 0000:05: resource 1 mem: [0x0-0x0]
[ 0.324577] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 0.324587] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.324597] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.324808] NET: Registered protocol family 2
[ 0.325624] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.328069] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.328653] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.334218] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.334466] TCP reno registered
[ 0.335018] NET: Registered protocol family 1
[ 0.335898] checking if image is initramfs...
[ 0.619267] rootfs image is initramfs; unpacking...
[ 0.619490] Freeing initrd memory: 2797k freed
[ 0.625139] PM: Adding info for platform:pcspkr
[ 0.625980] PM: Adding info for No Bus:snapshot
[ 0.626432] audit: initializing netlink socket (disabled)
[ 0.626714] type=2000 audit(1240041427.623:1): initialized
[ 0.669232] msgmni has been set to 981
[ 0.681678] alg: No test for stdrng (krng)
[ 0.681904] io scheduler noop registered
[ 0.682001] io scheduler anticipatory registered
[ 0.682098] io scheduler deadline registered
[ 0.682290] io scheduler cfq registered (default)
[ 0.682435] pci 0000:00:02.0: Boot video device
[ 0.683544] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.683588] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.683665] PM: Adding info for pci_express:0000:00:1c.0:pcie01
[ 0.683764] PM: Adding info for pci_express:0000:00:1c.0:pcie04
[ 0.683853] PM: Adding info for pci_express:0000:00:1c.0:pcie08
[ 0.684182] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.684223] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.684286] PM: Adding info for pci_express:0000:00:1c.1:pcie01
[ 0.684376] PM: Adding info for pci_express:0000:00:1c.1:pcie04
[ 0.684465] PM: Adding info for pci_express:0000:00:1c.1:pcie08
[ 0.684788] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.684828] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.684901] PM: Adding info for pci_express:0000:00:1c.2:pcie01
[ 0.685002] PM: Adding info for pci_express:0000:00:1c.2:pcie04
[ 0.685092] PM: Adding info for pci_express:0000:00:1c.2:pcie08
[ 0.685625] PM: Adding info for No Bus:tty
[ 0.685804] PM: Adding info for No Bus:console
[ 0.685893] PM: Adding info for No Bus:tty0
[ 0.686028] PM: Adding info for No Bus:vcs
[ 0.686199] PM: Adding info for No Bus:vcsa
[ 0.686340] PM: Adding info for No Bus:tty1
[ 0.686422] PM: Adding info for No Bus:tty2
[ 0.686503] PM: Adding info for No Bus:tty3
[ 0.686591] PM: Adding info for No Bus:tty4
[ 0.686708] PM: Adding info for No Bus:tty5
[ 0.686790] PM: Adding info for No Bus:tty6
[ 0.686872] PM: Adding info for No Bus:tty7
[ 0.686952] PM: Adding info for No Bus:tty8
[ 0.687033] PM: Adding info for No Bus:tty9
[ 0.687115] PM: Adding info for No Bus:tty10
[ 0.687197] PM: Adding info for No Bus:tty11
[ 0.687279] PM: Adding info for No Bus:tty12
[ 0.687362] PM: Adding info for No Bus:tty13
[ 0.687445] PM: Adding info for No Bus:tty14
[ 0.687532] PM: Adding info for No Bus:tty15
[ 0.687621] PM: Adding info for No Bus:tty16
[ 0.687705] PM: Adding info for No Bus:tty17
[ 0.687788] PM: Adding info for No Bus:tty18
[ 0.687871] PM: Adding info for No Bus:tty19
[ 0.687956] PM: Adding info for No Bus:tty20
[ 0.688040] PM: Adding info for No Bus:tty21
[ 0.688125] PM: Adding info for No Bus:tty22
[ 0.688210] PM: Adding info for No Bus:tty23
[ 0.688294] PM: Adding info for No Bus:tty24
[ 0.688379] PM: Adding info for No Bus:tty25
[ 0.688464] PM: Adding info for No Bus:tty26
[ 0.688551] PM: Adding info for No Bus:tty27
[ 0.688643] PM: Adding info for No Bus:tty28
[ 0.688730] PM: Adding info for No Bus:tty29
[ 0.688814] PM: Adding info for No Bus:tty30
[ 0.688910] PM: Adding info for No Bus:tty31
[ 0.688997] PM: Adding info for No Bus:tty32
[ 0.689083] PM: Adding info for No Bus:tty33
[ 0.689168] PM: Adding info for No Bus:tty34
[ 0.689257] PM: Adding info for No Bus:tty35
[ 0.689346] PM: Adding info for No Bus:tty36
[ 0.689432] PM: Adding info for No Bus:tty37
[ 0.689521] PM: Adding info for No Bus:tty38
[ 0.689610] PM: Adding info for No Bus:tty39
[ 0.689702] PM: Adding info for No Bus:tty40
[ 0.689789] PM: Adding info for No Bus:tty41
[ 0.689875] PM: Adding info for No Bus:tty42
[ 0.689979] PM: Adding info for No Bus:tty43
[ 0.690073] PM: Adding info for No Bus:tty44
[ 0.690161] PM: Adding info for No Bus:tty45
[ 0.690249] PM: Adding info for No Bus:tty46
[ 0.690340] PM: Adding info for No Bus:tty47
[ 0.690427] PM: Adding info for No Bus:tty48
[ 0.690514] PM: Adding info for No Bus:tty49
[ 0.690601] PM: Adding info for No Bus:tty50
[ 0.690699] PM: Adding info for No Bus:tty51
[ 0.690795] PM: Adding info for No Bus:tty52
[ 0.690884] PM: Adding info for No Bus:tty53
[ 0.690972] PM: Adding info for No Bus:tty54
[ 0.691062] PM: Adding info for No Bus:tty55
[ 0.691151] PM: Adding info for No Bus:tty56
[ 0.691241] PM: Adding info for No Bus:tty57
[ 0.691329] PM: Adding info for No Bus:tty58
[ 0.691419] PM: Adding info for No Bus:tty59
[ 0.691509] PM: Adding info for No Bus:tty60
[ 0.691598] PM: Adding info for No Bus:tty61
[ 0.691690] PM: Adding info for No Bus:tty62
[ 0.691783] PM: Adding info for No Bus:tty63
[ 0.692242] PM: Adding info for No Bus:ptmx
[ 0.692376] PM: Adding info for No Bus:hpet
[ 0.692860] PM: Adding info for No Bus:ram0
[ 0.693080] PM: Adding info for No Bus:1:0
[ 0.693328] PM: Adding info for No Bus:ram1
[ 0.693504] PM: Adding info for No Bus:1:1
[ 0.693673] PM: Adding info for No Bus:ram2
[ 0.693776] PM: Adding info for No Bus:1:2
[ 0.693931] PM: Adding info for No Bus:ram3
[ 0.694031] PM: Adding info for No Bus:1:3
[ 0.694179] PM: Adding info for No Bus:ram4
[ 0.694279] PM: Adding info for No Bus:1:4
[ 0.694428] PM: Adding info for No Bus:ram5
[ 0.694528] PM: Adding info for No Bus:1:5
[ 0.694683] PM: Adding info for No Bus:ram6
[ 0.694786] PM: Adding info for No Bus:1:6
[ 0.694934] PM: Adding info for No Bus:ram7
[ 0.695034] PM: Adding info for No Bus:1:7
[ 0.695254] PM: Adding info for No Bus:ram8
[ 0.695356] PM: Adding info for No Bus:1:8
[ 0.695516] PM: Adding info for No Bus:ram9
[ 0.695624] PM: Adding info for No Bus:1:9
[ 0.695776] PM: Adding info for No Bus:ram10
[ 0.695879] PM: Adding info for No Bus:1:10
[ 0.696029] PM: Adding info for No Bus:ram11
[ 0.696132] PM: Adding info for No Bus:1:11
[ 0.696281] PM: Adding info for No Bus:ram12
[ 0.696382] PM: Adding info for No Bus:1:12
[ 0.696539] PM: Adding info for No Bus:ram13
[ 0.696663] PM: Adding info for No Bus:1:13
[ 0.696819] PM: Adding info for No Bus:ram14
[ 0.696922] PM: Adding info for No Bus:1:14
[ 0.697131] PM: Adding info for No Bus:ram15
[ 0.697235] PM: Adding info for No Bus:1:15
[ 0.697306] brd: module loaded
[ 0.697483] Driver 'sd' needs updating - please use bus_type methods
[ 0.697721] ahci 0000:00:1f.2: version 3.0
[ 0.697830] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.698002] ahci 0000:00:1f.2: PCI INT B disabled
[ 0.698120] ahci: probe of 0000:00:1f.2 failed with error -22
[ 0.698392] ata_piix 0000:00:1f.2: version 2.12
[ 0.698417] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.698534] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.698996] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.730030] scsi0 : ata_piix
[ 0.730680] PM: Adding info for No Bus:host0
[ 0.730811] PM: Adding info for No Bus:host0
[ 0.731401] scsi1 : ata_piix
[ 0.731533] PM: Adding info for No Bus:host1
[ 0.731652] PM: Adding info for No Bus:host1
[ 0.731718] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.731827] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.732397] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.732844] PM: Adding info for platform:i8042
[ 0.744856] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.745179] PM: Adding info for No Bus:mice
[ 0.745381] PM: Adding info for No Bus:psaux
[ 0.745425] mice: PS/2 mouse device common for all mice
[ 0.745683] rtc_cmos 00:03: RTC can wake from S4
[ 0.746094] PM: Adding info for No Bus:rtc0
[ 0.746297] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.746455] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.746645] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 0.746861] PM: Adding info for platform:iTCO_wdt
[ 0.747067] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 0.747329] PM: Adding info for No Bus:watchdog
[ 0.747373] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 0.747486] iTCO_vendor_support: vendor-support=0
[ 0.747634] cpuidle: using governor ladder
[ 0.747730] cpuidle: using governor menu
[ 0.748124] Advanced Linux Sound Architecture Driver Version 1.0.19.
[ 0.748229] ALSA device list:
[ 0.748317] No soundcards found.
[ 0.750861] TCP cubic registered
[ 0.750960] Using IPI Shortcut mode
[ 0.751178] PM: Adding info for No Bus:cpu_dma_latency
[ 0.751285] PM: Adding info for No Bus:network_latency
[ 0.751430] PM: Adding info for No Bus:network_throughput
[ 0.751877] PM: Adding info for serio:serio0
[ 0.766668] Switched to NOHz mode on CPU #0
[ 0.785428] PM: Adding info for No Bus:input0
[ 0.785904] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.077108] ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
[ 1.077218] ata2.00: 7815024 sectors, multi 0: LBA
[ 1.090333] ata2.00: configured for UDMA/66
[ 1.091809] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 1.092182] PM: Adding info for No Bus:target1:0:0
[ 1.092455] PM: Adding info for scsi:1:0:0:0
[ 1.093328] PM: Adding info for No Bus:1:0:0:0
[ 1.093676] PM: Adding info for No Bus:1:0:0:0
[ 1.094012] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB)
[ 1.094233] sd 1:0:0:0: [sda] Write Protect is off
[ 1.094335] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.094481] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.094751] PM: Adding info for No Bus:sda
[ 1.095712] sda: sda1 sda2
[ 1.097080] PM: Adding info for No Bus:sda1
[ 1.097597] PM: Adding info for No Bus:sda2
[ 1.098014] PM: Adding info for No Bus:8:0
[ 1.098101] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.098628] PM: Resume from partition /dev/sda2
[ 1.098635] PM: Checking hibernation image.
[ 1.100964] PM: Resume from disk failed.
[ 1.101675] rtc_cmos 00:03: setting system clock to 2009-04-18 07:57:09 UTC (1240041429)
[ 1.101828] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 1.102623] Freeing unused kernel memory: 248k freed
[ 1.354542] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.366312] PM: Adding info for No Bus:thermal_zone0
[ 1.374534] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.374695] ACPI: Thermal Zone [TZ00] (32 C)
[ 2.907760] PM: Starting manual resume from disk
[ 2.907929] PM: Resume from partition 8:2
[ 2.907936] PM: Checking hibernation image.
[ 2.909243] PM: Resume from disk failed.
[ 2.933167] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.933184] PM: Basic memory bitmaps created
[ 2.959910] PM: Basic memory bitmaps freed
[ 2.983990] EXT4-fs: delayed allocation enabled
[ 2.984099] EXT4-fs: file extents enabled
[ 2.984438] EXT4-fs: mballoc enabled
[ 2.984810] EXT4-fs: mounted filesystem sda2 without journal
[ 3.756901] udev: starting version 140
[ 3.757127] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 4.367545] PM: Adding info for No Bus:event0
[ 4.931001] PM: Adding info for No Bus:input1
[ 4.931103] input: Power Button (FF) as /class/input/input1
[ 4.931455] PM: Adding info for No Bus:event1
[ 4.931506] ACPI: Power Button (FF) [PWRF]
[ 4.931906] PM: Adding info for No Bus:input2
[ 4.931998] input: Lid Switch as /class/input/input2
[ 4.932204] PM: Adding info for No Bus:event2
[ 4.972490] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 4.973043] PM: Adding info for No Bus:cooling_device0
[ 4.973110] processor ACPI_CPU:00: registered as cooling_device0
[ 4.973236] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.974976] ACPI: Lid Switch [LID]
[ 4.975331] PM: Adding info for No Bus:input3
[ 4.975435] input: Sleep Button (CM) as /class/input/input3
[ 4.975672] PM: Adding info for No Bus:event3
[ 4.975724] ACPI: Sleep Button (CM) [SLPB]
[ 4.976022] PM: Adding info for No Bus:input4
[ 4.976111] input: Power Button (CM) as /class/input/input4
[ 4.976329] PM: Adding info for No Bus:event4
[ 4.976378] ACPI: Power Button (CM) [PWRB]
[ 4.978561] PM: Adding info for No Bus:AC0
[ 4.979193] ACPI: AC Adapter [AC0] (on-line)
[ 4.985710] ACPI: Battery Slot [BAT0] (battery absent)
[ 5.004861] eeepc: Eee PC Hotkey Driver
[ 5.069203] eeepc: Hotkey init flags 0x41
[ 5.070976] eeepc: Get control methods supported: 0x101711
[ 5.071300] PM: Adding info for No Bus:input5
[ 5.071416] input: Asus EeePC extra buttons as /class/input/input5
[ 5.071662] PM: Adding info for No Bus:event5
[ 5.074524] PM: Adding info for No Bus:rfkill0
[ 5.075359] PM: Adding info for No Bus:eeepc
[ 5.132746] Linux agpgart interface v0.103
[ 5.151614] PM: Adding info for No Bus:hwmon0
[ 5.151977] PM: Adding info for platform:eeepc
[ 5.153770] PM: Adding info for No Bus:acpi_video0
[ 5.154276] PM: Adding info for No Bus:acpi_video1
[ 5.154446] PM: Adding info for No Bus:acpi_video2
[ 5.154876] PM: Adding info for No Bus:input6
[ 5.154985] input: Video Bus as /class/input/input6
[ 5.155248] PM: Adding info for No Bus:event6
[ 5.155302] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.223386] PM: Adding info for No Bus:timer
[ 5.233463] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 5.233573] Copyright (c) 2007 Atheros Corporation.
[ 5.233791] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.233921] atl2 0000:03:00.0: setting latency timer to 64
[ 5.305094] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 5.305772] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 5.310942] PM: Adding info for No Bus:agpgart
[ 5.311077] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 5.319675] intel_rng: FWH not detected
[ 5.411157] PM: Adding info for No Bus:eth0
[ 5.523056] usbcore: registered new interface driver usbfs
[ 5.523545] usbcore: registered new interface driver hub
[ 5.523849] usbcore: registered new device driver usb
[ 5.530701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.530935] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.531122] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.531136] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.532185] PM: Adding info for No Bus:usb_host1
[ 5.534328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.538507] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.538619] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.538676] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 5.546610] PM: Adding info for No Bus:input7
[ 5.546771] input: PC Speaker as /class/input/input7
[ 5.547022] PM: Adding info for No Bus:event7
[ 5.550078] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.551704] PM: Adding info for usb:usb1
[ 5.552178] usb usb1: configuration #1 chosen from 1 choice
[ 5.552926] PM: Adding info for usb:1-0:1.0
[ 5.553232] hub 1-0:1.0: USB hub found
[ 5.553602] hub 1-0:1.0: 8 ports detected
[ 5.555191] PM: Adding info for No Bus:usbdev1.1_ep81
[ 5.555871] PM: Adding info for No Bus:usbdev1.1_ep00
[ 5.647899] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.648189] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.648326] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.648340] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.648543] PM: Adding info for No Bus:usb_host2
[ 5.648859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.649061] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 5.649595] PM: Adding info for usb:usb2
[ 5.649718] usb usb2: configuration #1 chosen from 1 choice
[ 5.651724] PM: Adding info for usb:2-0:1.0
[ 5.651801] hub 2-0:1.0: USB hub found
[ 5.652197] hub 2-0:1.0: 2 ports detected
[ 5.652608] PM: Adding info for No Bus:usbdev2.1_ep81
[ 5.652841] PM: Adding info for No Bus:usbdev2.1_ep00
[ 5.652974] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.653101] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.653113] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.653303] PM: Adding info for No Bus:usb_host3
[ 5.653810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.654041] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 5.654534] PM: Adding info for usb:usb3
[ 5.654653] usb usb3: configuration #1 chosen from 1 choice
[ 5.654880] PM: Adding info for usb:3-0:1.0
[ 5.654951] hub 3-0:1.0: USB hub found
[ 5.655074] hub 3-0:1.0: 2 ports detected
[ 5.655364] PM: Adding info for No Bus:usbdev3.1_ep81
[ 5.655576] PM: Adding info for No Bus:usbdev3.1_ep00
[ 5.655707] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.655833] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.655845] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.656038] PM: Adding info for No Bus:usb_host4
[ 5.656106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.656322] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 5.656829] PM: Adding info for usb:usb4
[ 5.656953] usb usb4: configuration #1 chosen from 1 choice
[ 5.657185] PM: Adding info for usb:4-0:1.0
[ 5.657257] hub 4-0:1.0: USB hub found
[ 5.657380] hub 4-0:1.0: 2 ports detected
[ 5.657667] PM: Adding info for No Bus:usbdev4.1_ep81
[ 5.657884] PM: Adding info for No Bus:usbdev4.1_ep00
[ 5.658007] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.658134] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.658146] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.658338] PM: Adding info for No Bus:usb_host5
[ 5.658405] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.658616] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 5.659096] PM: Adding info for usb:usb5
[ 5.659222] usb usb5: configuration #1 chosen from 1 choice
[ 5.659443] PM: Adding info for usb:5-0:1.0
[ 5.659521] hub 5-0:1.0: USB hub found
[ 5.659642] hub 5-0:1.0: 2 ports detected
[ 5.659926] PM: Adding info for No Bus:usbdev5.1_ep81
[ 5.660167] PM: Adding info for No Bus:usbdev5.1_ep00
[ 5.695102] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.696043] PM: Adding info for No Bus:i2c-0
[ 5.850185] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.850463] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.886850] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 6.012032] PM: Adding info for usb:1-5
[ 6.012250] usb 1-5: configuration #1 chosen from 1 choice
[ 6.013122] PM: Adding info for usb:1-5:1.0
[ 6.013417] PM: Adding info for No Bus:usbdev1.2_ep01
[ 6.013598] PM: Adding info for No Bus:usbdev1.2_ep82
[ 6.013816] PM: Adding info for No Bus:usbdev1.2_ep00
[ 6.130124] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 6.251446] PM: Adding info for No Bus:pcmC0D0p
[ 6.251926] PM: Adding info for No Bus:pcmC0D0c
[ 6.253233] PM: Adding info for No Bus:dsp
[ 6.253995] PM: Adding info for No Bus:audio
[ 6.254687] PM: Adding info for No Bus:hwC0D0
[ 6.254874] PM: Adding info for No Bus:controlC0
[ 6.255245] PM: Adding info for No Bus:mixer
[ 6.259028] PM: Adding info for usb:1-8
[ 6.259171] usb 1-8: configuration #1 chosen from 1 choice
[ 6.259540] PM: Adding info for usb:1-8:1.0
[ 6.259746] PM: Adding info for No Bus:usbdev1.3_ep81
[ 6.259907] PM: Adding info for usb:1-8:1.1
[ 6.260184] PM: Adding info for No Bus:usbdev1.3_ep82
[ 6.260408] PM: Adding info for No Bus:usbdev1.3_ep00
[ 6.386655] usual_tables: module license 'unspecified' taints kernel.
[ 6.386816] Disabling lockdep due to kernel taint
[ 6.439651] Linux video capture interface: v2.00
[ 6.446770] Marking TSC unstable due to TSC halts in idle
[ 6.456417] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
[ 6.614887] PM: Adding info for No Bus:video0
[ 6.615051] usbcore: registered new interface driver uvcvideo
[ 6.615165] USB Video Class driver (v0.1.0)
[ 6.763383] Clocksource tsc unstable (delta = -96153146 ns)
[ 6.853199] PM: Adding info for No Bus:vcs2
[ 6.853297] PM: Adding info for No Bus:vcsa2
[ 6.861768] PM: Adding info for No Bus:vcs3
[ 6.861864] PM: Adding info for No Bus:vcsa3
[ 6.868203] PM: Adding info for No Bus:vcs4
[ 6.868299] PM: Adding info for No Bus:vcsa4
[ 6.870832] PM: Adding info for No Bus:vcs5
[ 6.870920] PM: Adding info for No Bus:vcsa5
[ 6.875213] PM: Adding info for No Bus:vcs6
[ 6.875298] PM: Adding info for No Bus:vcsa6
[ 7.854286] EXT4 FS on sda2, no journal
[ 8.280115] Adding 524280k swap on /swapfile. Priority:-1 extents:1683 across:3168868k
[ 9.510557] NET: Registered protocol family 10
[ 9.512717] lo: Disabled Privacy Extensions
[ 12.962439] PM: Adding info for No Bus:vcs7
[ 12.962543] PM: Adding info for No Bus:vcsa7
[ 15.819409] [drm] Initialized drm 1.1.0 20060810
[ 16.163239] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.163261] pci 0000:00:02.0: setting latency timer to 64
[ 16.169550] PM: Adding info for No Bus:card0
[ 16.170451] [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
[ 16.170513] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.740069] atl2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 17.740537] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.945294] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 17.945411] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.075778] NET: Registered protocol family 17
[ 27.973369] eth0: no IPv6 routers present
[ 57.549665] PM: Adding info for No Bus:vcs63
[ 57.549769] PM: Adding info for No Bus:vcsa63
[ 57.551117] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 60.580288] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 60.580304] PM: Basic memory bitmaps created
[ 60.580627] PM: Adding info for No Bus:vcs8
[ 60.580727] PM: Adding info for No Bus:vcsa8
[ 61.125471] Syncing filesystems ... done.
[ 61.132711] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 61.134847] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 61.135207] PM: Shrinking memory... <6>before: sc.nr_reclaimed = 0
[ 61.180993] pass = 0, prio = 12, sc.nr_reclaimed = 0
[ 61.181004] pass = 0, prio = 11, sc.nr_reclaimed = 0
[ 61.181014] pass = 0, prio = 10, sc.nr_reclaimed = 0
[ 61.181024] pass = 0, prio = 9, sc.nr_reclaimed = 0
[ 61.181033] pass = 0, prio = 8, sc.nr_reclaimed = 0
[ 61.181043] pass = 0, prio = 7, sc.nr_reclaimed = 0
[ 61.186509] pass = 0, prio = 6, sc.nr_reclaimed = 0
[ 61.186525] pass = 0, prio = 5, sc.nr_reclaimed = 0
[ 61.186534] pass = 0, prio = 4, sc.nr_reclaimed = 0
[ 61.186544] pass = 0, prio = 3, sc.nr_reclaimed = 0
[ 61.333383] pass = 0, prio = 2, sc.nr_reclaimed = 7746
[ 61.436711] pass = 0, prio = 1, sc.nr_reclaimed = 1957
[ 61.556712] pass = 0, prio = 0, sc.nr_reclaimed = 4528
[ 61.556729] pass = 1, prio = 12, sc.nr_reclaimed = 0
[ 61.556739] pass = 1, prio = 11, sc.nr_reclaimed = 0
[ 61.556749] pass = 1, prio = 10, sc.nr_reclaimed = 0
[ 61.556759] pass = 1, prio = 9, sc.nr_reclaimed = 0
[ 61.556768] pass = 1, prio = 8, sc.nr_reclaimed = 0
[ 61.556778] pass = 1, prio = 7, sc.nr_reclaimed = 0
[ 61.556787] pass = 1, prio = 6, sc.nr_reclaimed = 0
[ 61.556797] pass = 1, prio = 5, sc.nr_reclaimed = 0
[ 61.556806] pass = 1, prio = 4, sc.nr_reclaimed = 0
[ 61.556816] pass = 1, prio = 3, sc.nr_reclaimed = 0
[ 61.556825] pass = 1, prio = 2, sc.nr_reclaimed = 0
[ 61.556835] pass = 1, prio = 1, sc.nr_reclaimed = 0
[ 61.595841] pass = 1, prio = 0, sc.nr_reclaimed = 0
[ 61.595854] pass = 2, prio = 12, sc.nr_reclaimed = 0
[ 61.595864] pass = 2, prio = 11, sc.nr_reclaimed = 0
[ 61.595873] pass = 2, prio = 10, sc.nr_reclaimed = 0
[ 61.595883] pass = 2, prio = 9, sc.nr_reclaimed = 0
[ 61.710044] pass = 2, prio = 8, sc.nr_reclaimed = 2895
[ 61.710062] pass = 2, prio = 7, sc.nr_reclaimed = 0
[ 61.710072] pass = 2, prio = 6, sc.nr_reclaimed = 0
[ 61.710081] pass = 2, prio = 5, sc.nr_reclaimed = 0
[ 61.710091] pass = 2, prio = 4, sc.nr_reclaimed = 0
[ 61.710100] pass = 2, prio = 3, sc.nr_reclaimed = 0
[ 61.710110] pass = 2, prio = 2, sc.nr_reclaimed = 0
[ 61.710119] pass = 2, prio = 1, sc.nr_reclaimed = 0
[ 61.823378] pass = 2, prio = 0, sc.nr_reclaimed = 1802
[ 61.823396] pass = 3, prio = 12, sc.nr_reclaimed = 0
[ 61.823406] pass = 3, prio = 11, sc.nr_reclaimed = 0
[ 61.823416] pass = 3, prio = 10, sc.nr_reclaimed = 0
[ 61.823425] pass = 3, prio = 9, sc.nr_reclaimed = 0
[ 61.823435] pass = 3, prio = 8, sc.nr_reclaimed = 0
[ 61.823444] pass = 3, prio = 7, sc.nr_reclaimed = 0
[ 61.823454] pass = 3, prio = 6, sc.nr_reclaimed = 0
[ 61.823464] pass = 3, prio = 5, sc.nr_reclaimed = 0
[ 61.823473] pass = 3, prio = 4, sc.nr_reclaimed = 0
[ 61.823483] pass = 3, prio = 3, sc.nr_reclaimed = 0
[ 61.823492] pass = 3, prio = 2, sc.nr_reclaimed = 0
[ 61.823502] pass = 3, prio = 1, sc.nr_reclaimed = 0
[ 62.586707] pass = 3, prio = 0, sc.nr_reclaimed = 2716
[ 62.608037] pass = 4, prio = 12, sc.nr_reclaimed = 3070
[ 62.634644] pass = 4, prio = 11, sc.nr_reclaimed = 5048
[ 62.638782] pass = 4, prio = 10, sc.nr_reclaimed = 192
[ 62.740052] pass = 4, prio = 9, sc.nr_reclaimed = 0
[ 62.843385] pass = 4, prio = 8, sc.nr_reclaimed = 640
[ 62.946726] pass = 4, prio = 7, sc.nr_reclaimed = 640
[ 63.046711] pass = 4, prio = 6, sc.nr_reclaimed = 640
[ 63.146717] pass = 4, prio = 5, sc.nr_reclaimed = 608
[ 63.246712] pass = 4, prio = 4, sc.nr_reclaimed = 600
[ 63.346704] pass = 4, prio = 3, sc.nr_reclaimed = 128
[ 63.446698] pass = 4, prio = 2, sc.nr_reclaimed = 0
[ 63.546705] pass = 4, prio = 1, sc.nr_reclaimed = 0
[ 63.646698] pass = 4, prio = 0, sc.nr_reclaimed = 0
[ 63.646708] after: sc.nr_reclaimed = 0
[ 63.646715] shrink_all_memory(10000) failed
[ 63.646722] Mem-Info:
[ 63.646729] DMA per-cpu:
[ 63.646738] CPU 0: hi: 0, btch: 1 usd: 0
[ 63.646745] Normal per-cpu:
[ 63.646753] CPU 0: hi: 186, btch: 31 usd: 182
[ 63.646769] Active_anon:0 active_file:0 inactive_anon:0
[ 63.646773] inactive_file:22 unevictable:1098 dirty:0 writeback:0 unstable:0
[ 63.646779] free:91278 slab:1984 mapped:953 pagetables:529 bounce:0
[ 63.646796] DMA free:8008kB min:88kB low:108kB high:132kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB present:15804kB pages_scanned:0 all_unreclaimable? no
[ 63.646809] lowmem_reserve[]: 0 483 483
[ 63.646833] Normal free:357104kB min:2764kB low:3452kB high:4144kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:88kB unevictable:4392kB present:495300kB pages_scanned:176 all_unreclaimable? no
[ 63.646847] lowmem_reserve[]: 0 0 0
[ 63.646862] DMA: 2*4kB 6*8kB 3*16kB 3*32kB 2*64kB 2*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 1*4096kB = 8008kB
[ 63.646906] Normal: 298*4kB 269*8kB 214*16kB 154*32kB 119*64kB 75*128kB 66*256kB 44*512kB 26*1024kB 14*2048kB 57*4096kB = 357104kB
[ 63.646951] 972 total pagecache pages
[ 63.646958] 0 pages in swap cache
[ 63.646966] Swap cache stats: add 6615, delete 6615, find 0/0
[ 63.646974] Free swap = 497820kB
[ 63.646980] Total swap = 524280kB
[ 63.652111] 128880 pages RAM
[ 63.652119] 3192 pages reserved
[ 63.652126] 37178 pages shared
[ 63.652132] 4437 pages non-shared
[ 63.652177] Restarting tasks ... done.
[ 63.671646] PM: Basic memory bitmaps freed
[ 64.521472] PM: Removing info for No Bus:vcs63
[ 64.521642] PM: Removing info for No Bus:vcsa63
[ 65.267700] atl2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 65.268233] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.270982] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 65.271111] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 75.913359] eth0: no IPv6 routers present