Re: [PATCH] fsldma: use PCI Read Multiple command

[Li Yang]

On Sat, Apr 25, 2009 at 2:35 AM, Ira Snyder <iws@xxxxxxxxxxxxxxxx> wrote:
> By default, the Freescale 83xx DMA controller uses the PCI Read Line
> command when reading data over the PCI bus. Setting the controller to use
> the PCI Read Multiple command instead allows the controller to read much
> larger bursts of data, which provides a drastic speed increase.
>
> The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI
> bridge was between the devices trying to communicate.
>
> A simple test driver showed an increase from 4MB/sec to 116MB/sec when
> performing DMA over the PCI bus. Using DMA to transfer between blocks of
> local SDRAM showed no change in performance with this patch. The dmatest
> driver was also used to verify the correctness of the transfers, and showed
> no errors.
>
> Signed-off-by: Ira W. Snyder <iws@xxxxxxxxxxxxxxxx>

Acked-by: Li Yang <leoli@xxxxxxxxxxxxx>

Thanks,
Leo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/