[PATCH 09/13] x86, vmlinux.lds: unify first part of initdata
From: Sam Ravnborg
Date: Wed Apr 29 2009 - 03:48:49 EST
32 bit:
- Move definition of __init_begin outside output_section
because it covers more than one section
- Move ALIGN() for end-of-section inside .smp_locks output section.
Same effect but the intent is better documented that
we need both start and end aligned.
64 bit:
- Move ALIGN() outside output section in .init.setup
- Deleted unused __smp_alt_* symbols
None of the above should result in any functional change.
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Tim Abbott <tabbott@xxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
---
arch/x86/kernel/vmlinux.lds.S | 61 ++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/vmlinux_32.lds.S | 60 -------------------------------------
arch/x86/kernel/vmlinux_64.lds.S | 59 ------------------------------------
3 files changed, 61 insertions(+), 119 deletions(-)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 168de19..458fa58 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -226,6 +226,67 @@ SECTIONS
#endif /* CONFIG_X86_64 */
+ /* init_task */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
+#ifdef CONFIG_X86_64
+ :data.init
+#endif
+
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .; /* paired with __init_end */
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
+ }
+
+ SECURITY_INIT
+
+
#ifdef CONFIG_X86_32
# include "vmlinux_32.lds.S"
#else
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index 8ade846..d8ba539 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -1,63 +1,3 @@
- /* init_task */
- . = ALIGN(THREAD_SIZE);
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
- }
-
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- /* might get freed after init */
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- }
- /* will be freed after init
- * Following ALIGN() is required to make sure no other data falls on the
- * same page where __smp_alt_end is pointing as that page might be freed
- * after boot. Always make sure that ALIGN() directive is present after
- * the section which contains __smp_alt_end.
- */
- . = ALIGN(PAGE_SIZE);
-
- /* Init code and data - will be freed after init */
- . = ALIGN(PAGE_SIZE);
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
-
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- INIT_DATA
- }
-
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
-
- SECURITY_INIT
-
. = ALIGN(4);
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
__alt_instructions = .;
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 013aa0e..0e8054e 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -1,62 +1,3 @@
- /* init_task */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- . = ALIGN(THREAD_SIZE);
- *(.data.init_task)
- } :data.init
-
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- __smp_alt_begin = .;
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- __smp_alt_end = .;
- }
-
- /* Init code and data */
- . = ALIGN(PAGE_SIZE);
- __init_begin = .; /* paired with __init_end */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
-
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- __initdata_begin = .;
- INIT_DATA
- __initdata_end = .;
- }
-
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
-
- SECURITY_INIT
-
. = ALIGN(8);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
__parainstructions = .;
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/