[PATCH 02/21] amd64_edac: add PCI config register defines

From: Borislav Petkov
Date: Wed Apr 29 2009 - 12:59:19 EST


From: Doug Thompson <dougthompson@xxxxxxxxxxxx>

Signed-off-by: Doug Thompson <dougthompson@xxxxxxxxxxxx>
Signed-off-by: Borislav Petkov <borislav.petkov@xxxxxxx>
---
drivers/edac/amd64_edac.c | 738 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 738 insertions(+), 0 deletions(-)
create mode 100644 drivers/edac/amd64_edac.c

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
new file mode 100644
index 0000000..d43be21
--- /dev/null
+++ b/drivers/edac/amd64_edac.c
@@ -0,0 +1,738 @@
+/*
+ * AMD64 class Memory Controller kernel module
+ *
+ * Copyright (c) 2009 SoftwareBitMaker.
+ * Copyright (c) 2009 Advanced Micro Devices, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Originally Written by Thayne Harbaugh
+ *
+ * Changes by Douglas "norsk" Thompson <dougthompson@xxxxxxxxxxxx>:
+ * - K8 CPU Revision D and greater support
+ *
+ * Changes by Dave Peterson <dsp@xxxxxxxx> <dave_peterson@xxxxxxxxx>:
+ * - Module largely rewritten, with new (and hopefully correct)
+ * code for dealing with node and chip select interleaving,
+ * various code cleanup, and bug fixes
+ * - Added support for memory hoisting using DRAM hole address
+ * register
+ *
+ * Changes by Douglas "norsk" Thompson <dougthompson@xxxxxxxxxxxx>:
+ * -K8 Rev (1207) revision support added, required Revision
+ * specific mini-driver code to support Rev F as well as
+ * prior revisions
+ *
+ * Changes by Douglas "norsk" Thompson <dougthompson@xxxxxxxxxxxx>:
+ * -Family 10h revision support added. New PCI Device IDs,
+ * indicating new changes. Actual registers modified
+ * were slight, less than the Rev E to Rev F transition
+ * but changing the PCI Device ID was the proper thing to
+ * do, as it provides for almost automactic family
+ * detection. The mods to Rev F required more family
+ * information detection.
+ *
+ * Changes/Fixes by Borislav Petkov <borislav.petkov@xxxxxxx>:
+ * - misc fixes and code cleanups
+ *
+ * This module is based on the following documents
+ * (available from http://www.amd.com/):
+ *
+ * Title: BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
+ * Opteron Processors
+ * AMD publication #: 26094
+ *` Revision: 3.26
+ *
+ * Title: BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
+ * Processors
+ * AMD publication #: 32559
+ * Revision: 3.00
+ * Issue Date: May 2006
+ *
+ * Title: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
+ * Processors
+ * AMD publication #: 31116
+ * Revision: 3.00
+ * Issue Date: September 07, 2007
+ *
+ * Sections in the first 2 documents are no longer in sync with each other.
+ * The Family 10h BKDG was totally re-written from scratch with a new
+ * presentation model.
+ * Therefore, comments that refer to a Document section might be off.
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/mmzone.h>
+#include <linux/edac.h>
+#include "edac_core.h"
+
+#define amd64_printk(level, fmt, arg...) \
+ edac_printk(level, "amd64", fmt, ##arg)
+
+#define amd64_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg)
+
+/*
+ * Throughout the comments in this code, the following terms are used:
+ *
+ * SysAddr, DramAddr, and InputAddr
+ *
+ * These terms come directly from the amd64 documentation
+ * (AMD publication #26094). They are defined as follows:
+ *
+ * SysAddr:
+ * This is a physical address generated by a CPU core or a device
+ * doing DMA. If generated by a CPU core, a SysAddr is the result of
+ * a virtual to physical address translation by the CPU core's address
+ * translation mechanism (MMU).
+ *
+ * DramAddr:
+ * A DramAddr is derived from a SysAddr by subtracting an offset that
+ * depends on which node the SysAddr maps to and whether the SysAddr
+ * is within a range affected by memory hoisting. The DRAM Base
+ * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
+ * determine which node a SysAddr maps to.
+ *
+ * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
+ * is within the range of addresses specified by this register, then
+ * a value x from the DHAR is subtracted from the SysAddr to produce a
+ * DramAddr. Here, x represents the base address for the node that
+ * the SysAddr maps to plus an offset due to memory hoisting. See
+ * section 3.4.8 and the comments in amd64_get_dram_hole_info() and
+ * sys_addr_to_dram_addr() below for more information.
+ *
+ * If the SysAddr is not affected by the DHAR then a value y is
+ * subtracted from the SysAddr to produce a DramAddr. Here, y is the
+ * base address for the node that the SysAddr maps to. See section
+ * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
+ * information.
+ *
+ * InputAddr:
+ * A DramAddr is translated to an InputAddr before being passed to the
+ * memory controller for the node that the DramAddr is associated
+ * with. The memory controller then maps the InputAddr to a csrow.
+ * If node interleaving is not in use, then the InputAddr has the same
+ * value as the DramAddr. Otherwise, the InputAddr is produced by
+ * discarding the bits used for node interleaving from the DramAddr.
+ * See section 3.4.4 for more information.
+ *
+ * The memory controller for a given node uses its DRAM CS Base and
+ * DRAM CS Mask registers to map an InputAddr to a csrow. See
+ * sections 3.5.4 and 3.5.5 for more information.
+ */
+
+/*
+ * Alter this version for the K8 module when modifications are made
+ */
+#define EDAC_AMD64_VERSION " Ver: 3.2.0 " __DATE__
+#define EDAC_MOD_STR "amd64_edac"
+
+/* Extended Model from CPUID, for CPU Revision numbers */
+#define OPTERON_CPU_LE_REV_C 0
+#define OPTERON_CPU_REV_D 1
+#define OPTERON_CPU_REV_E 2
+
+/* NPT processors have the following Extended Models */
+#define OPTERON_CPU_REV_F 4
+#define OPTERON_CPU_REV_FA 5
+
+/* Hardware limit on ChipSelect rows per MC and processors per system */
+#define CHIPSELECT_COUNT 8
+#define DRAM_REG_COUNT 8
+
+/*************************************************************/
+/* K8 register addresses - device 0 Function 1 - Address Map */
+/*************************************************************/
+#define K8_DRAM_BASE_LOW 0x40
+ /* Function 1: DRAM Base Register (8 x 32b
+ * interlaced with K8_DRAM_LIMIT_LOW)
+ *
+ * 31:16 DRAM base address reg bits[39:24]
+ * 15:11 reserved
+ * 10:8 interleave enable
+ * 7:2 reserved
+ * 1 write enable
+ * 0 read enable
+ *
+ */
+
+#define K8_DRAM_LIMIT_LOW 0x44
+ /* Function 1: DRAM Limit Register (8 x 32b
+ * interlaced with K8_DRAM_BASE_LOW)
+ *
+ * 31:16 DRAM Limit addr 32:24
+ * 15:11 reserved
+ * 10:8 interleave select
+ * 7:3 reserved
+ * 2:0 destination node ID
+ */
+
+#define K8_DHAR 0xf0
+ /* Function 1: DRAM Hole Address Register
+ *
+ * K8
+ * 31:24 DramHoleBase
+ * 23:16 reserved
+ * 15:8 DramHoleOffset
+ * 7:1 reserved
+ * 0 DramHoleValid
+ *
+ * F10
+ * 31:24 DramHoleBase
+ * 23:16 reserved
+ * 15:7 DramHoleOffset
+ * 6:2 reserved
+ * 1 DramMemHoistValid
+ * 0 DramHoleValid
+ */
+#define DHAR_VALID BIT(0)
+#define F10_DRAM_MEM_HOIST_VALID BIT(1)
+
+#define DHAR_BASE_MASK 0xff000000
+#define dhar_base(dhar) (dhar & DHAR_BASE_MASK)
+
+#define K8_DHAR_OFFSET_MASK 0x0000ff00
+#define k8_dhar_offset(dhar) ((dhar & K8_DHAR_OFFSET_MASK) << 16)
+
+#define F10_DHAR_OFFSET_MASK 0x0000ff80
+ /* NOTE: Extra mask bit vs K8 */
+#define f10_dhar_offset(dhar) ((dhar & F10_DHAR_OFFSET_MASK) << 16)
+
+
+/* F10 High BASE/LIMIT registers */
+#define F10_DRAM_BASE_HIGH 0x140
+ /* Function 1: DRAM Base register HIGH
+ *
+ * 7:0 Drambase[47:40] DRAM base address reg
+ * bits[47:40]
+ */
+
+#define F10_DRAM_LIMIT_HIGH 0x144
+ /* Function 1: DRAM Limit Register HIGH
+ *
+ * 7:0 DRAM limit address register bits[47:40]
+ */
+
+/*****************************************************************/
+/* K8 register addresses - device 0 Function 2 - DRAM controller */
+/*************************************************************/
+#define K8_DCSB0 0x40
+#define F10_DCSB1 0x140
+ /* Function 2: DRAM Chip-Select Base (8 x 32b)
+ *
+ * For Rev E and prior
+ * 31:21 Base addr high 35:25
+ * 20:16 reserved
+ * 15:9 Base addr low 19:13 (interlvd)
+ * 8:1 reserved
+ * 0 chip-select bank enable
+ *
+ * For Rev F (NPT) and later
+ * 31:29 reserved
+ * 28:19 Base address (36:27)
+ * 18:14 reserved
+ * 13:5 Base address (21:13)
+ * 4:3 reserved
+ * 2 TestFail
+ * 1 Spare Rank
+ * 0 CESenable
+ *
+ */
+#define K8_DCSB_CS_ENABLE BIT(0)
+#define K8_DCSB_NPT_SPARE BIT(1)
+#define K8_DCSB_NPT_TESTFAIL BIT(2)
+
+/* REV E: selects bits 31-21 and 15-9 from DCSB
+ * and the shift amount to form address
+ */
+#define REV_E_DCSB_BASE_BITS (0xFFE0FE00ULL)
+#define REV_E_DCS_SHIFT 4
+#define REV_E_DCSM_COUNT 8
+
+#define REV_F_F1Xh_DCSB_BASE_BITS (0x1FF83FE0ULL)
+#define REV_F_F1Xh_DCS_SHIFT 8
+
+/* REV F and later : selects bits 28-19 and 13-5 from DCSB
+ * and the shift amount to form address
+ */
+#define REV_F_DCSB_BASE_BITS (0x1FF83FE0ULL)
+#define REV_F_DCS_SHIFT 8
+#define REV_F_DCSM_COUNT 4
+#define F10_DCSM_COUNT 4
+#define F11_DCSM_COUNT 2
+
+/* DRAM CS Mask Registers */
+#define K8_DCSM0 0x60
+#define F10_DCSM1 0x160
+ /* Function 2: DRAM Chip-Select Mask (8 x 32b)
+ *
+ * 31:30 reserved
+ * 29:21 addr mask high 33:25
+ * 20:16 reserved
+ * 15:9 addr mask low 19:13
+ * 8:0 reserved
+ */
+
+/* REV E: selects bits 29-21 and 15-9 from DCSM */
+#define REV_E_DCSM_MASK_BITS 0x3FE0FE00
+/* represents unused bits [24-20] and [12-0] */
+#define REV_E_DCS_NOTUSED_BITS 0x01F01FFF
+
+/* REV F and later: selects bits 28-19 and 13-5 from DCSM */
+#define REV_F_F1Xh_DCSM_MASK_BITS 0x1FF83FE0
+/* represents unused bits [26-22] and [12-0] */
+#define REV_F_F1Xh_DCS_NOTUSED_BITS 0x07C01FFF
+
+#define DBAM0 0x80
+#define DBAM1 0x180
+ /* Function 2: DRAM Base Addr Mapping (32b) */
+
+/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
+#define DBAM_DIMM(i, reg) ((((reg) >> (4*i))) & 0xF)
+
+#define DBAM_MAX_VALUE 11
+
+
+#define F10_DCLR_0 0x90
+#define F10_DCLR_1 0x190
+ /* Function 2: DRAM configuration low reg (32b)
+ * One for each DCTx
+ *
+ * Rev E and earlier CPUS:
+ *
+ * 31:28 reserved
+ * 27:25 Bypass Max: 000b=respect
+ * 24 Dissable receivers - no sockets
+ * 23:20 x4 DIMMS
+ * 19 32byte chunks
+ * 18 Unbuffered
+ * 17 ECC enabled
+ * 16 128/64 bit (dual/single chan)
+ * 15:14 R/W Queue bypass count
+ * 13 Self refresh
+ * 12 exit self refresh
+ * 11 mem clear status
+ * 10 DRAM enable
+ * 9 reserved
+ * 8 DRAM init
+ * 7:4 reserved
+ * 3 dis DQS hysteresis
+ * 2 QFC enabled
+ * 1 DRAM drive strength
+ * 0 Digital Locked Loop disable
+ *
+ * Rev F
+ *
+ * 31:20 reserved
+ * 19 DIMM ECC Enable
+ * 18:17 reserved
+ * 16 Unbuffered DIMM
+ * 15:12 x4 DIMMs
+ * 11 Width128 bits
+ * 10 burstLength32
+ * 9 SelRefRateEn
+ * 8 ParEn
+ * 7 DramDrvWeak
+ * 6 reserved
+ * 5:4 DramTerm
+ * 3:2 reserved
+ * 1 ExitSelfRef
+ * 0 InitDram
+ *
+ * Rev F10h
+ *
+ * 31:24 reserved
+ * 23 FoceAutoPcg
+ * 22:21 IdleCycLowLimit
+ * 20 DynPageCloseEn
+ * 19 DIMM ECC Enable
+ * 18 PendRefPayback
+ * 17 EnterSelRef
+ * 16 Unbuffered DIMM
+ * 15:12 x4 DIMMs
+ * 11 Width128 bits
+ * 10 burstLength32
+ * 9 SelRefRateEn
+ * 8 ParEn
+ * 7 DramDrvWeak
+ * 6 DisDqsBar
+ * 5:4 DramTerm
+ * 3:2 reserved
+ * 1 ExitSelfRef
+ * 0 InitDram
+ */
+#define REVE_WIDTH_128 BIT(16)
+#define F10_WIDTH_128 BIT(11)
+
+
+#define F10_DCHR_0 0x94
+#define F10_DCHR_1 0x194
+ /* Function 2: DRAM Configuration High Reg */
+
+#define F10_DCHR_FOUR_RANK_DIMM BIT(18)
+#define F10_DCHR_Ddr3Mode BIT(8)
+#define F10_DCHR_MblMode BIT(6)
+
+
+#define F10_DCTL_SEL_LOW 0x110
+ /* Function 2: DRAM Controller SELECT LOW */
+
+#define dct_sel_baseaddr(pvt) \
+ ((pvt->dram_ctl_select_low) & 0xFFFFF800)
+
+#define dct_sel_interleave_addr(pvt) \
+ (((pvt->dram_ctl_select_low) >> 6) & 0x3)
+
+enum {
+ F10_DCTL_SEL_LOW_DctSelHiRngEn = BIT(0),
+ F10_DCTL_SEL_LOW_DctSelIntLvEn = BIT(2),
+ F10_DCTL_SEL_LOW_DctGangEn = BIT(4),
+ F10_DCTL_SEL_LOW_DctDatIntLv = BIT(5),
+ F10_DCTL_SEL_LOW_DramEnable = BIT(8),
+ F10_DCTL_SEL_LOW_MemCleared = BIT(10),
+};
+
+#define dct_high_range_enabled(pvt) \
+ (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
+
+#define dct_interleave_enabled(pvt) \
+ (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
+
+#define dct_ganging_enabled(pvt) \
+ (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
+
+#define dct_data_interleave_enabled(pvt) \
+ (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
+
+#define dct_dram_enabled(pvt) \
+ (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
+
+#define dct_memory_cleared(pvt) \
+ (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
+
+
+#define F10_DCTL_SEL_HIGH 0x114
+ /* device 0 Function 2 - DRAM
+ * Controller SELECT HIGH
+ */
+
+/**************************************************************/
+/* K8 register addresses - device 0 Function 3 - Misc Control */
+/**************************************************************/
+#define K8_NBCTL 0x40
+ /* Function 3: MCA NB Control (32b)
+ *
+ * 1 MCA UE Reporting
+ * 0 MCA CE Reporting
+ */
+/* Correctable ECC error reporting enable */
+#define K8_NBCTL_CECCEn BIT(0)
+
+/* UnCorrectable ECC error reporting enable */
+#define K8_NBCTL_UECCEn BIT(1)
+
+#define K8_NBCFG 0x44
+ /* Function 3: MCA NB Config (32b)
+ *
+ * 23 Chip-kill x4 ECC enable
+ * 22 ECC enable
+ */
+#define K8_NBCFG_CHIPKILL BIT(23)
+#define K8_NBCFG_ECC_ENABLE BIT(22)
+
+#define K8_NBSL 0x48
+ /* Function 3: MCA NB Status Low (32b)
+ *
+ * 31:24 Syndrome 15:8 chip-kill x4
+ * 23:20 reserved
+ * 19:16 Extended err code (F0fh and earlier)
+ * 20:16 Extended err code (F10h and later)
+ * 15:0 Err code
+ */
+
+
+#define EXTRACT_HIGH_SYNDROME(x) (((x) >> 24) & 0xff)
+#define EXTRACT_EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f)
+
+/* Start Family F10h: Normalized Extended Error Codes */
+#define F10_NBSL_EXT_ERR_RES (0x0)
+#define F10_NBSL_EXT_ERR_CRC (0x1)
+#define F10_NBSL_EXT_ERR_SYNC (0x2)
+#define F10_NBSL_EXT_ERR_MST (0x3)
+#define F10_NBSL_EXT_ERR_TGT (0x4)
+#define F10_NBSL_EXT_ERR_GART (0x5)
+#define F10_NBSL_EXT_ERR_RMW (0x6)
+#define F10_NBSL_EXT_ERR_WDT (0x7)
+#define F10_NBSL_EXT_ERR_ECC (0x8)
+#define F10_NBSL_EXT_ERR_DEV (0x9)
+#define F10_NBSL_EXT_ERR_LINK_DATA (0xA)
+
+/* Next two are overloaded values */
+#define F10_NBSL_EXT_ERR_LINK_PROTO (0xB)
+#define F10_NBSL_EXT_ERR_L3_PROTO (0xB)
+
+#define F10_NBSL_EXT_ERR_NB_ARRAY (0xC)
+#define F10_NBSL_EXT_ERR_DRAM_PARITY (0xD)
+#define F10_NBSL_EXT_ERR_LINK_RETRY (0xE)
+
+/* Next two are overloaded values */
+#define F10_NBSL_EXT_ERR_GART_WALK (0xF)
+#define F10_NBSL_EXT_ERR_DEV_WALK (0xF)
+
+/* 0x10 to 0x1B: Reserved */
+
+#define F10_NBSL_EXT_ERR_L3_DATA (0x1C)
+#define F10_NBSL_EXT_ERR_L3_TAG (0x1D)
+#define F10_NBSL_EXT_ERR_L3_LRU (0x1E)
+/* End Family F10h: Extended Error Codes */
+
+/* Start K8: Normalized Extended Error Codes */
+#define K8_NBSL_EXT_ERR_ECC (0x0)
+#define K8_NBSL_EXT_ERR_CRC (0x1)
+#define K8_NBSL_EXT_ERR_SYNC (0x2)
+#define K8_NBSL_EXT_ERR_MST (0x3)
+#define K8_NBSL_EXT_ERR_TGT (0x4)
+#define K8_NBSL_EXT_ERR_GART (0x5)
+#define K8_NBSL_EXT_ERR_RMW (0x6)
+#define K8_NBSL_EXT_ERR_WDT (0x7)
+#define K8_NBSL_EXT_ERR_CHIPKILL_ECC (0x8)
+#define K8_NBSL_EXT_ERR_DRAM_PARITY (0xD)
+/* End K8: Extended Error Codes */
+
+
+/* Error Code */
+#define EXTRACT_ERROR_CODE(x) ((x) & 0xffff)
+#define TEST_TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
+#define TEST_MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
+#define TEST_BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
+#define EXTRACT_TT_CODE(x) (((x) >> 2) & 0x3)
+#define EXTRACT_II_CODE(x) (((x) >> 2) & 0x3)
+#define EXTRACT_LL_CODE(x) (((x) >> 0) & 0x3)
+#define EXTRACT_RRRR_CODE(x) (((x) >> 4) & 0xf)
+#define EXTRACT_TO_CODE(x) (((x) >> 8) & 0x1)
+#define EXTRACT_PP_CODE(x) (((x) >> 9) & 0x3)
+
+/* The following are for BUS type errors AFTER values have been
+ * normalized by shifting right
+ */
+#define K8_NBSL_PP_SRC (0x0)
+#define K8_NBSL_PP_RES (0x1)
+#define K8_NBSL_PP_OBS (0x2)
+#define K8_NBSL_PP_GENERIC (0x3)
+
+
+#define K8_NBSH 0x4C
+ /* Function 3: MCA NB Status High (32b)
+ *
+ * 31 Err valid
+ * 30 Err overflow
+ * 29 Uncorrected err
+ * 28 Err enable
+ * 27 Misc err reg valid
+ * 26 Err addr valid
+ * 25 proc context corrupt
+ * 24:23 reserved
+ * 22:15 Syndrome bits 7:0
+ * 14 CE
+ * 13 UE
+ * 12:9 reserved
+ * 8 err found by scrubber
+ * 7 reserved
+ * 6:4 Hyper-transport link number
+ * 3:2 reserved= Rev F/Family 10h=Quad Core
+ * 3 Err CPU 3 (F10)
+ * 2 Err CPU 2 (F10)
+ * 1 Err CPU 1 (Dual Core)
+ * 0 Err CPU 0
+ */
+
+#define K8_NBSH_VALID_BIT BIT(31)
+#define K8_NBSH_OVERFLOW BIT(30)
+#define K8_NBSH_UNCORRECTED_ERR BIT(29)
+#define K8_NBSH_ERR_ENABLE BIT(28)
+#define K8_NBSH_MISC_ERR_VALID BIT(27)
+#define K8_NBSH_VALID_ERROR_ADDR BIT(26)
+#define K8_NBSH_PCC BIT(25)
+#define K8_NBSH_CECC BIT(14)
+#define K8_NBSH_UECC BIT(13)
+#define K8_NBSH_ERR_SCRUBER BIT(8)
+#define K8_NBSH_CORE3 BIT(3)
+#define K8_NBSH_CORE2 BIT(2)
+#define K8_NBSH_CORE1 BIT(1)
+#define K8_NBSH_CORE0 BIT(0)
+
+#define EXTRACT_LDT_LINK(x) (((x) >> 4) & 0x7)
+#define EXTRACT_ERR_CPU_MAP(x) ((x) & 0xF)
+#define EXTRACT_LOW_SYNDROME(x) (((x) >> 15) & 0xff)
+
+
+#define K8_NBEAL 0x50
+ /* Function 3: MCA NB err addr low (32b)
+ *
+ * 31:3 Err addr low 31:3
+ * 2:0 reserved
+ */
+
+#define K8_NBEAH 0x54
+ /* Function 3: MCA NB err addr high (32b)
+ *
+ * 31:8 reserved
+ * 7:0 Err addr high 39:32
+ */
+
+#define K8_SCRCTRL 0x58
+ /* Function 3: Memory scrub control register.
+ *
+ * 30:21 reserved
+ * 20:16 dcache scrub
+ * 15:13 reserved
+ * 12:8 L2Scrub
+ * 7:5 reserved
+ * 4:0 dramscrub
+ *
+ */
+
+
+
+#define F10_NB_CFG_LOW 0x88
+ /* Function 3: NB Configuration reg low */
+#define F10_NB_CFG_LOW_ENABLE_EXT_CFG BIT(14)
+
+#define F10_NB_CFG_HIGH 0x8C
+ /* Function 3: NB Configuration reg high */
+
+
+#define F10_ONLINE_SPARE 0xB0
+ /* Function 3: On-Line Spare Control Register */
+#define F10_ONLINE_SPARE_SWAPDONE0(x) ((x) & BIT(1))
+#define F10_ONLINE_SPARE_SWAPDONE1(x) ((x) & BIT(3))
+#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007)
+#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007)
+
+
+#define F10_NB_ARRAY_ADDR 0xB8
+ /* Function 3:
+ * Error injection NB Array Addr Reg
+ *
+ * For a 64-byte cacheline, we can select
+ * one of 4 16-byte sections (0,1,2,3) of
+ * that cacheline.
+ * Bits 2:1 provide that selection.
+ *
+ * which 16-bit word of the section is
+ * selected by bitmap 28:20 of F10_NB_ARRAY_DATA
+ *
+ * which bit of the the selected word
+ * is then masked by bits 15:0 of the same reg
+ *
+ * Thus we have a tuple of:
+ * section,word,bit
+ */
+
+ /* DRAM ECC Array Select */
+#define F10_NB_ARRAY_DRAM_ECC 0x80000000
+
+ /* Bits 2:1 are used to select 16-byte
+ * section within a 64-byte cacheline
+ */
+#define SET_NB_ARRAY_ADDRESS(section) (((section) & 0x3) << 1)
+
+#define F10_NB_ARRAY_DATA 0xBC
+ /* Function 3:
+ * Error injection NB Array Data Reg
+ *
+ * 28:20 ErrInjEn selects 16-bit word
+ * (bit map: 0-8)
+ * 17 EccWrReq
+ * 16 EccRdReq
+ * 15:0 EccVector, select bits
+ */
+#define SET_NB_DRAM_INJECTION_WRITE(word, bits) \
+ (BIT(((word) & 0xF) + 20) | \
+ BIT(17) | \
+ ((bits) & 0xF))
+#define SET_NB_DRAM_INJECTION_READ(word, bits) \
+ (BIT(((word) & 0xF) + 20) | \
+ BIT(16) | \
+ ((bits) & 0xF))
+
+
+
+#define K8_NBCAP 0xE8
+ /* Function 3: MCA NB capabilities (32b)
+ *
+ * 31:9 reserved
+ * 4 ChipKill S4ECD4ED capable
+ * 3 SECDED capable
+ */
+#define K8_NBCAP_CORES (BIT(12)|BIT(13))
+#define K8_NBCAP_CHIPKILL BIT(4)
+#define K8_NBCAP_SECDED BIT(3)
+#define K8_NBCAP_8_NODE BIT(2)
+#define K8_NBCAP_DUAL_NODE BIT(1)
+#define K8_NBCAP_DCT_DUAL BIT(0)
+
+ /* MSR's */
+
+ /*
+ * K8_MSR_MCxCTL (64b)
+ * (0x400,404,408,40C,410)
+ * 63 Enable reporting source 63
+ * .
+ * .
+ * .
+ * 2 Enable error source 2
+ * 1 Enable error source 1
+ * 0 Enable error source 0
+ */
+
+ /*
+ * K8_MSR_MCxSTAT (64b)
+ * (0x401,405,409,40D,411)
+ * 63 Error valid
+ * 62 Status overflow
+ * 61 UE
+ * 60 Enabled error condition
+ * 59 Misc register valid (not used)
+ * 58 Err addr register valid
+ * 57 Processor context corrupt
+ * 56:32 Other information
+ * 31:16 Model specific error code
+ * 15:0 MCA err code
+ */
+
+ /*
+ * K8_MSR_MCxADDR (64b)
+ * (0x402,406,40A,40E,412)
+ * 63:48 reserved
+ * 47:0 Address
+ */
+
+ /*
+ * K8_MSR_MCxMISC (64b)
+ * (0x403,407,40B,40F,413)
+ * Unused on Athlon64 and K8
+ */
+
+/* MSR Regs */
+#define K8_MSR_MCGCTL 0x017b
+ /* Machine Chk Global report ctl (64b)
+ *
+ * 31:5 reserved
+ * 4 North Bridge
+ * 3 Load/Store
+ * 2 Bus Unit
+ * 1 Instruction Cache
+ * 0 Data Cache
+ */
+#define K8_MSR_MCGCTL_NBE BIT(4)
+
+#define K8_MSR_MC4CTL 0x0410 /* North Bridge Check report ctl (64b) */
+#define K8_MSR_MC4STAT 0x0411 /* North Bridge status (64b) */
+#define K8_MSR_MC4ADDR 0x0412 /* North Bridge Address (64b) */
--
1.6.2.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/