Re: [PATCH 2.6.29.2] PXA I2C: Define log level for i2c PXA error report

[伊泽]

2009/5/11 Mark Brown <broonie@xxxxxxxxxxxxx>:
> On Mon, May 11, 2009 at 11:31:51AM +0100, Michael Abbott wrote:
>
>> static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
>>         .class = I2C_CLASS_HWMON
>> };
>
>> ...
>>         pxa_set_i2c_info(&xcep_i2c_platform_data);
>
>> This is called in the .init_machine method, and the target system is a
>> PXA255.
>
>> However, after the error messages on startup, all the sensors seem to be
>> detected and seem to be operating normally.
>
> These errors occur when attempting to talk to non-existant devices which
> is almost certainly going to happen with the class based device probing
> since the kernel will probe for each device at each possible address on
> each I2C bus.
>
that happen when the device driver registered but the hardware doesnot
exist.i once met this
when my camera driver could not find the hardware camera.

thanks
--wxc200
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/