[git patches] libata fixes
From: Jeff Garzik
Date: Mon May 11 2009 - 14:37:46 EST
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c | 18 ++++++++--
drivers/ata/libata-core.c | 4 ++-
drivers/ata/libata-eh.c | 34 +++++++++++++++++--
drivers/ata/libata-scsi.c | 4 +-
drivers/ata/pata_pdc202xx_old.c | 6 ++--
drivers/ata/sata_mv.c | 69 +++++++++++++++++++++++++++++++++++++-
6 files changed, 120 insertions(+), 15 deletions(-)
Alan Cox (2):
ata_piix: ICH7 does not support correct MWDMA timings
ata_piix: The Sony TZ90 needs the cable type hardcoding
Bartlomiej Zolnierkiewicz (1):
pata_pdc202xx_old: fix UDMA33 handling
Borislav Petkov (1):
libata: fix suspend/resume for ATA SEMB devices
Martin Michlmayr (1):
sata_mv: use new sata phy register settings for new devices
Tejun Heo (2):
libata: fix attach error handling
libata: clear ering on resume
Vitaly Mayatskikh (1):
Avoid world-writable sysfs files in libata driver.
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 942d14a..d51a17c 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -72,6 +72,7 @@
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
* and must be dword aligned
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
+ * ICH7 errata #16 - MWDMA1 timings are incorrect
*
* Should have been BIOS fixed:
* 450NX: errata #19 - DMA hangs on old 450NX
@@ -94,7 +95,7 @@
#include <linux/dmi.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.12"
+#define DRV_VERSION "2.13"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
@@ -136,6 +137,7 @@ enum piix_controller_ids {
ich_pata_33, /* ICH up to UDMA 33 only */
ich_pata_66, /* ICH up to 66 Mhz */
ich_pata_100, /* ICH up to UDMA 100 */
+ ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/
ich5_sata,
ich6_sata,
ich6m_sata,
@@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* ICH6 (and 6) (i915) UDMA 100 */
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ICH7/7-R (i945, i975) UDMA 100*/
- { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
+ { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
/* ICH8 Mobile PATA Controller */
{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
@@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &ich_pata_ops,
},
+ [ich_pata_100_nomwdma1] =
+ {
+ .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2_ONLY,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &ich_pata_ops,
+ },
+
[ich5_sata] =
{
.flags = PIIX_SATA_FLAGS,
@@ -594,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
+ { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
/* end marker */
{ 0, }
};
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 17c5d48..c924230 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
if (ata_class_enabled(new_class) &&
- new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+ new_class != ATA_DEV_ATA &&
+ new_class != ATA_DEV_ATAPI &&
+ new_class != ATA_DEV_SEMB) {
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
dev->class, new_class);
rc = -ENODEV;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0183131..94919ad 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
} else if (dev->class == ATA_DEV_UNKNOWN &&
ehc->tries[dev->devno] &&
ata_class_enabled(ehc->classes[dev->devno])) {
+ /* Temporarily set dev->class, it will be
+ * permanently set once all configurations are
+ * complete. This is necessary because new
+ * device configuration is done in two
+ * separate loops.
+ */
dev->class = ehc->classes[dev->devno];
if (dev->class == ATA_DEV_PMP)
@@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
else
rc = ata_dev_read_id(dev, &dev->class,
readid_flags, dev->id);
+
+ /* read_id might have changed class, store and reset */
+ ehc->classes[dev->devno] = dev->class;
+ dev->class = ATA_DEV_UNKNOWN;
+
switch (rc) {
case 0:
/* clear error info accumulated during probe */
@@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
case -ENOENT:
/* IDENTIFY was issued to non-existent
* device. No need to reset. Just
- * thaw and kill the device.
+ * thaw and ignore the device.
*/
ata_eh_thaw_port(ap);
- dev->class = ATA_DEV_UNKNOWN;
break;
default:
- dev->class = ATA_DEV_UNKNOWN;
goto err;
}
}
@@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
dev->class == ATA_DEV_PMP)
continue;
+ dev->class = ehc->classes[dev->devno];
+
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
- if (rc)
+ if (rc) {
+ dev->class = ATA_DEV_UNKNOWN;
goto err;
+ }
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
@@ -3494,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
+ struct ata_link *link;
+ struct ata_device *dev;
unsigned long flags;
int rc = 0;
@@ -3508,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ /*
+ * Error timestamps are in jiffies which doesn't run while
+ * suspended and PHY events during resume isn't too uncommon.
+ * When the two are combined, it can lead to unnecessary speed
+ * downs if the machine is suspended and resumed repeatedly.
+ * Clear error history.
+ */
+ ata_for_each_link(link, ap, HOST_FIRST)
+ ata_for_each_dev(dev, link, ALL)
+ ata_ering_clear(&dev->ering);
+
ata_acpi_set_state(ap, PMSG_ON);
if (ap->ops->port_resume)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2733b0c..68d9132 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
return ap->ops->em_show(ap, buf);
return -EINVAL;
}
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
ata_scsi_em_message_show, ata_scsi_em_message_store);
EXPORT_SYMBOL_GPL(dev_attr_em_message);
@@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
}
return -EINVAL;
}
-DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
ata_scsi_activity_store);
EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 5fedb3d..2f3c9be 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -2,7 +2,7 @@
* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2009 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
*
@@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
u32 len;
/* Check we keep host level locking here */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) | sel66, clock);
else
iowrite8(ioread8(clock) & ~sel66, clock);
@@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
iowrite8(ioread8(clock) & ~sel66, clock);
}
/* Flip back to 33Mhz for PIO */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
ata_bmdma_stop(qc);
pdc202xx_set_piomode(ap, adev);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 870dcfd..23714ae 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -293,6 +293,10 @@ enum {
FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+ PHY_MODE9_GEN2 = 0x398,
+ PHY_MODE9_GEN1 = 0x39c,
+ PHYCFG_OFS = 0x3a0, /* only in 65n devices */
+
MV5_PHY_MODE = 0x74,
MV5_LTMODE = 0x30,
MV5_PHY_CTL = 0x0C,
@@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
void __iomem *mmio);
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port);
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
@@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = {
.reset_bus = mv_soc_reset_bus,
};
+static const struct mv_hw_ops mv_soc_65n_ops = {
+ .phy_errata = mv_soc_65n_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
+
/*
* Functions
*/
@@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
return;
}
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+ u32 reg;
+
+ reg = readl(port_mmio + PHY_MODE3);
+ reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
+ reg |= (0x1 << 27);
+ reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
+ reg |= (0x1 << 29);
+ writel(reg, port_mmio + PHY_MODE3);
+
+ reg = readl(port_mmio + PHY_MODE4);
+ reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+ reg |= (0x1 << 16);
+ writel(reg, port_mmio + PHY_MODE4);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN2);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN1);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ * soc_is_65 - check if the soc is 65 nano device
+ *
+ * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ * register, this register should contain non-zero value and it exists only
+ * in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+ void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+ if (readl(port0_mmio + PHYCFG_OFS))
+ return true;
+ return false;
+}
+
static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
{
u32 ifcfg = readl(port_mmio + SATA_IFCFG);
@@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
}
break;
case chip_soc:
- hpriv->ops = &mv_soc_ops;
+ if (soc_is_65n(hpriv))
+ hpriv->ops = &mv_soc_65n_ops;
+ else
+ hpriv->ops = &mv_soc_ops;
hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
MV_HP_ERRATA_60X1C0;
break;
@@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
n_hc = mv_get_hc_count(host->ports[0]->flags);
for (port = 0; port < host->n_ports; port++)
- hpriv->ops->read_preamp(hpriv, port, mmio);
+ if (hpriv->ops->read_preamp)
+ hpriv->ops->read_preamp(hpriv, port, mmio);
rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
if (rc)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/