[PATCH 06/10] OMAP3 SRAM: convert SRAM code to use macros rather thanmagic numbers

From: Paul Walmsley
Date: Tue May 26 2009 - 18:24:20 EST


Convert omap3_sram_configure_core_dpll() to use macros rather than
magic numbers.

Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
---
arch/arm/mach-omap2/sram34xx.S | 53 +++++++++++++++++++++++++++++-----------
1 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 37a1e1f..16eb4ef 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -36,6 +36,29 @@

.text

+/* r4 parameters */
+#define SDRC_NO_UNLOCK_DLL 0x0
+#define SDRC_UNLOCK_DLL 0x1
+
+/* SDRC_DLLA_CTRL bit settings */
+#define DLLIDLE_MASK 0x4
+
+/* SDRC_DLLA_STATUS bit settings */
+#define LOCKSTATUS_MASK 0x4
+
+/* SDRC_POWER bit settings */
+#define SRFRONIDLEREQ_MASK 0x40
+#define PWDENA_MASK 0x4
+
+/* CM_IDLEST1_CORE bit settings */
+#define ST_SDRC_MASK 0x2
+
+/* CM_ICLKEN1_CORE bit settings */
+#define EN_SDRC_MASK 0x2
+
+/* CM_CLKSEL1_PLL bit settings */
+#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b
+
/*
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
* r0 = new SDRC_RFR_CTRL register contents
@@ -57,13 +80,13 @@ ENTRY(omap3_sram_configure_core_dpll)
dsb @ flush buffered writes to interconnect
cmp r3, #0x2 @ if increasing SDRC clk rate,
blne configure_sdrc @ program the SDRC regs early (for RFR)
- cmp r4, #0x1 @ set the intended DLL state
+ cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
bl configure_core_dpll @ change the DPLL3 M2 divider
bl enable_sdrc @ take SDRC out of idle
- cmp r4, #0x1 @ wait for DLL status to change
+ cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1 @ if increasing SDRC clk rate,
@@ -78,33 +101,33 @@ return_to_sdram:
unlock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
- orr r12, r12, #0x4
+ orr r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
- bic r12, r12, #0x4
+ bic r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
ldr r12, [r11] @ read the contents of SDRC_POWER
mov r9, r12 @ keep a copy of SDRC_POWER bits
- orr r12, r12, #0x40 @ enable self refresh on idle req
- bic r12, r12, #0x4 @ clear PWDENA
+ orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
+ bic r12, r12, #PWDENA_MASK @ clear PWDENA
str r12, [r11] @ write back to SDRC_POWER register
ldr r12, [r11] @ posted-write barrier for SDRC
idle_sdrc:
ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
ldr r12, [r11]
- bic r12, r12, #0x2 @ disable iclk bit for SDRC
+ bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC
str r12, [r11]
wait_sdrc_idle:
ldr r11, omap3_cm_idlest1_core
ldr r12, [r11]
- and r12, r12, #0x2 @ check for SDRC idle
- cmp r12, #2
+ and r12, r12, #ST_SDRC_MASK @ check for SDRC idle
+ cmp r12, #ST_SDRC_MASK
bne wait_sdrc_idle
bx lr
configure_core_dpll:
@@ -112,7 +135,7 @@ configure_core_dpll:
ldr r12, [r11]
ldr r10, core_m2_mask_val @ modify m2 for core dpll
and r12, r12, r10
- orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
+ orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
str r12, [r11]
ldr r12, [r11] @ posted-write barrier for CM
bx lr
@@ -123,12 +146,12 @@ wait_clk_stable:
enable_sdrc:
ldr r11, omap3_cm_iclken1_core
ldr r12, [r11]
- orr r12, r12, #0x2 @ enable iclk bit for SDRC
+ orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC
str r12, [r11]
wait_sdrc_idle1:
ldr r11, omap3_cm_idlest1_core
ldr r12, [r11]
- and r12, r12, #0x2
+ and r12, r12, #ST_SDRC_MASK
cmp r12, #0
bne wait_sdrc_idle1
restore_sdrc_power_val:
@@ -138,14 +161,14 @@ restore_sdrc_power_val:
wait_dll_lock:
ldr r11, omap3_sdrc_dlla_status
ldr r12, [r11]
- and r12, r12, #0x4
- cmp r12, #0x4
+ and r12, r12, #LOCKSTATUS_MASK
+ cmp r12, #LOCKSTATUS_MASK
bne wait_dll_lock
bx lr
wait_dll_unlock:
ldr r11, omap3_sdrc_dlla_status
ldr r12, [r11]
- and r12, r12, #0x4
+ and r12, r12, #LOCKSTATUS_MASK
cmp r12, #0x0
bne wait_dll_unlock
bx lr


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/