Kconfig: .ko is normally not included in module names, make itconsistent

From: Pavel Machek
Date: Thu Jun 04 2009 - 10:41:34 EST

Next message: Russell Cattelan: "Re: [PATCH 0/4] FS: userspace notification of errors"
Previous message: Mike Dresser: "Re: [Bug #13375] Kernel crash with 2.6.29 + nfs + xfs (radix-tree)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@xxxxxx>

---
commit 67bab97b212ed399459e2babf8268b5411c28dff
tree 9e8645c55ada7e6518cd6a1749764daada7f8376
parent 7ca0c98aa0bc0d6d3c27ab40e1ca4021a72b960d
author Pavel <pavel@xxxxxx> Thu, 04 Jun 2009 16:40:29 +0200
committer Pavel <pavel@xxxxxx> Thu, 04 Jun 2009 16:40:29 +0200

arch/blackfin/Kconfig | 2 +-
drivers/block/Kconfig | 2 +-
drivers/char/Kconfig | 2 +-
drivers/connector/Kconfig | 2 +-
drivers/ide/Kconfig | 2 +-
drivers/media/dvb/dvb-usb/Kconfig | 2 +-
drivers/mtd/devices/Kconfig | 2 +-
drivers/mtd/nand/Kconfig | 4 ++--
drivers/net/Kconfig | 4 ++--
drivers/net/wireless/Kconfig | 2 +-
drivers/net/wireless/iwlwifi/Kconfig | 4 ++--
drivers/w1/Kconfig | 2 +-
drivers/w1/masters/Kconfig | 6 +++---
drivers/watchdog/Kconfig | 2 +-
net/ipv6/Kconfig | 2 +-
15 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 3640cdc..bc9ce89 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -872,7 +872,7 @@ config BFIN_GPTIMERS
are unsure, say N.

To compile this driver as a module, choose M here: the module
- will be called gptimers.ko.
+ will be called gptimers.

choice
prompt "Uncached DMA region"
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ddea8e4..f2e5764 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -112,7 +112,7 @@ config GDROM
with up to 1 GB of data. This drive will also read standard CD ROM
disks. Select this option to access any disks in your GD ROM drive.
Most users will want to say "Y" here.
- You can also build this as a module which will be called gdrom.ko
+ You can also build this as a module which will be called gdrom.

source "drivers/block/paride/Kconfig"

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 735bbe2..73e85ad 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -679,7 +679,7 @@ config HVCS
this driver.

To compile this driver as a module, choose M here: the
- module will be called hvcs.ko. Additionally, this module
+ module will be called hvcs. Additionally, this module
will depend on arch specific APIs exported from hvcserver.ko
which will also be compiled when this driver is built as a
module.
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 100bfd4..6e6730f 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -7,7 +7,7 @@ menuconfig CONNECTOR
of the netlink socket protocol.

Connector support can also be built as a module. If so, the module
- will be called cn.ko.
+ will be called cn.

if CONNECTOR

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf06494..9a5d0aa 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@ menuconfig IDE
SMART parameters from disk drives.

To compile this driver as a module, choose M here: the
- module will be called ide-core.ko.
+ module will be called ide-core.

For further information, please read <file:Documentation/ide/ide.txt>.

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 60955a7..1bb66e1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
help
Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
firmware protocol used by this module is similar to the one used by the
- old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+ old ttusb-driver - that's why the module is called dvb-usb-ttusb2.

config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6fde0a2..325fab9 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,7 +49,7 @@ config MTD_MS02NV
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called ms02-nv.ko.
+ The module will be called ms02-nv.

config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 890936d..f327689 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
help
This enables the driver for the NAND flash device found on the
Basler eXcite Smart Camera. If built as a module, the driver
- will be named "excite_nandflash.ko".
+ will be named excite_nandflash.

config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÄÂ chip"
@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
controller is enabled for NAND, and currently requires that
the controller be in MMIO mode.

- If you say "m", the module will be called "cs553x_nand.ko".
+ If you say "m", the module will be called cs553x_nand.

config MTD_NAND_ATMEL
tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d..b4683ce 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1880,7 +1880,7 @@ config FEC_MPC52xx
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
- If compiled as module, it will be called 'fec_mpc52xx.ko'.
+ If compiled as module, it will be called fec_mpc52xx.

config FEC_MPC52xx_MDIO
bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO
(Motorola? industry standard).
If your board uses an external PHY connected to FEC, enable this.
If not sure, enable.
- If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+ If compiled as module, it will be called fec_mpc52xx_phy.

config NE_H8300
tristate "NE2000 compatible support for H8/300"
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 8a08235..25b56d2 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -310,7 +310,7 @@ config PRISM54
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called prism54.ko.
+ The module will be called prism54.

config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f64..7361623 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -75,7 +75,7 @@ config IWLAGN
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwlagn.ko.
+ module will be called iwlagn.

config IWL4965
@@ -113,7 +113,7 @@ config IWL3945
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl3945.ko.
+ module will be called iwl3945.

config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9adbb4f..fd2c7bd 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -8,7 +8,7 @@ menuconfig W1
If you want W1 support, you should say Y here.

This W1 support can also be built as a module. If so, the module
- will be called wire.ko.
+ will be called wire.

if W1

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 96d2f8e..3195fb8 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
using Matrox's G400 GPIO pins.

This support is also available as a module. If so, the module
- will be called matrox_w1.ko.
+ will be called matrox_w1.

config W1_MASTER_DS2490
tristate "DS2490 USB <-> W1 transport layer for 1-wire"
@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
for example DS9490*.

This support is also available as a module. If so, the module
- will be called ds2490.ko.
+ will be called ds2490.

config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge"
@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
GPIO pins. This driver uses the GPIO API to control the wire.

This support is also available as a module. If so, the module
- will be called w1-gpio.ko.
+ will be called w1-gpio.

config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21..452082f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -531,7 +531,7 @@ config SBC8360_WDT
Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).

To compile this driver as a module, choose M here: the
- module will be called sbc8360.ko.
+ module will be called sbc8360.

Most people will say N.

diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ca8cb32..ead6c7a 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -168,7 +168,7 @@ config IPV6_SIT
into IPv4 packets. This is useful if you want to connect two IPv6
networks over an IPv4-only path.

- Saying M here will produce a module called sit.ko. If unsure, say Y.
+ Saying M here will produce a module called sit. If unsure, say Y.

config IPV6_NDISC_NODETYPE
bool

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Russell Cattelan: "Re: [PATCH 0/4] FS: userspace notification of errors"
Previous message: Mike Dresser: "Re: [Bug #13375] Kernel crash with 2.6.29 + nfs + xfs (radix-tree)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]