only a single core (out of 8) initialized

From: david
Date: Thu Jun 04 2009 - 22:52:57 EST

Next message: Magnus Damm: "Re: [PATCH] Driver Core: Add platform device arch data V2"
Previous message: Paul Mackerras: "[PATCH] perf_counter: Fix lockup with interrupting counters"
Next in thread: Yinghai Lu: "Re: only a single core (out of 8) initialized"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

this is 2.6.30-rc7 with a patch added to debug a nv sata driver incompatibility with the Intel SSDs on a tyan motherboard

on one system it sees all 8 cores, on the other system it only initializes one core.

can anyone help me spot what's going wrong in the one that's only seeing a single core? If I'm reading things correctly it's seeing both sockets for the NUMA setup, but then only initializing one core on the first socket.

David LangLinux version 2.6.30-rc7.SMP.K8-64-test3-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #28 SMP Tue Jun 2 14:06:09 PDT 2009
Command line: root=/dev/sda3 ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7fd0000 (usable)
BIOS-e820: 00000000d7fd0000 - 00000000d7fde000 (ACPI data)
BIOS-e820: 00000000d7fde000 - 00000000d8000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 0000000100000000 - 0000000228000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x228000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 00D0000000 mask FFF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000228000000 aka 8832M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xd7fd0 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000d7fd0000
0000000000 - 00d7e00000 page 2M
00d7e00000 - 00d7fd0000 page 4k
kernel direct mapping tables up to d7fd0000 @ 10000-16000
init_memory_mapping: 0000000100000000-0000000228000000
0100000000 - 0228000000 page 2M
kernel direct mapping tables up to 228000000 @ 14000-1e000
ACPI: RSDP 00000000000fa8d0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000d7fd0100 0005C (v01 112707 XSDT1716 20071127 MSFT 00000097)
ACPI: FACP 00000000d7fd0290 000F4 (v03 112707 FACP1716 20071127 MSFT 00000097)
ACPI: DSDT 00000000d7fd0470 04D61 (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
ACPI: FACS 00000000d7fde000 00040
ACPI: APIC 00000000d7fd0390 000A0 (v01 112707 APIC1716 20071127 MSFT 00000097)
ACPI: MCFG 00000000d7fd0430 0003C (v01 112707 OEMMCFG 20071127 MSFT 00000097)
ACPI: OEMB 00000000d7fde040 00091 (v01 112707 OEMB1716 20071127 MSFT 00000097)
ACPI: SRAT 00000000d7fd51e0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: HPET 00000000d7fd52f0 00038 (v01 112707 OEMHPET0 20071127 MSFT 00000097)
ACPI: SSDT 00000000d7fd5330 002E0 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-d8000000
SRAT: Node 0 PXM 0 100000000-128000000
SRAT: Node 1 PXM 1 128000000-228000000
NUMA: Allocated memnodemap from 19000 - 1d540
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000128000000
NODE_DATA [000000000001d540 - 000000000001f53f]
bootmap [0000000000020000 - 0000000000044fff] pages 25
(8 early reservations) ==> bootmem [0000000000 - 0128000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 00009b65e4] TEXT DATA BSS ==> [0000200000 - 00009b65e4]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [00009b7000 - 00009b7160] BRK ==> [00009b7000 - 00009b7160]
#5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
#7 [0000019000 - 000001d540] MEMNODEMAP ==> [0000019000 - 000001d540]
Bootmem setup node 1 0000000128000000-0000000228000000
NODE_DATA [0000000128000000 - 0000000128001fff]
bootmap [0000000128002000 - 0000000128021fff] pages 20
(8 early reservations) ==> bootmem [0128000000 - 0228000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 00009b65e4] TEXT DATA BSS
#3 [000009fc00 - 0000100000] BIOS reserved
#4 [00009b7000 - 00009b7160] BRK
#5 [0000010000 - 0000014000] PGTABLE
#6 [0000014000 - 0000019000] PGTABLE
#7 [0000019000 - 000001d540] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] ff780
[ffffe200040c0000-ffffe200041fffff] potential offnode page_structs
[ffffe20000000000-ffffe200041fffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0
[ffffe20004200000-ffffe200079fffff] PMD -> [ffff880128200000-ffff88012b9fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00228000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000d7fd0
0: 0x00100000 -> 0x00128000
1: 0x00128000 -> 0x00228000
On node 0 totalpages: 1048415
DMA zone: 56 pages used for memmap
DMA zone: 2086 pages reserved
DMA zone: 1841 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 866312 pages, LIFO batch:31
Normal zone: 2240 pages used for memmap
Normal zone: 161600 pages, LIFO batch:31
On node 1 totalpages: 1048576
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:2
PERCPU: Remapped at ffffc20000000000 with large pages, static data 69216 bytes
Built 2 zonelists in Node order, mobility grouping on. Total pages: 2063993
Policy zone: Normal
Kernel command line: root=/dev/sda3 ro quiet
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1800.121 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ d8000000 size 128 MB
Node 1: aperture @ d8000000 size 128 MB
Memory: 8262212k/9043968k available (4081k kernel code, 656004k absent, 125752k reserved, 1867k data, 400k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.24 BogoMIPS (lpj=7200484)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3600.15 BogoMIPS (lpj=7200306)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3600.14 BogoMIPS (lpj=7200283)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3600.17 BogoMIPS (lpj=7200341)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (14400.70 BogoMIPS).
net_namespace: 1352 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 5545.000 MB/sec
xor: using function: generic_sse (5545.000 MB/sec)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [2000, 3fff]
TOM: 00000000d8000000 aka 3456M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d8000000, dfffffff]
TOM2: 0000000228000000 aka 8832M
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [d8000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [228000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 9B, should be 90 [20090320]
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2f7f]
pci 0000:00:01.1: reg 10 io port: [0x8c00-0x8c3f]
pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfdbfb000-0xfdbfbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfdbfac00-0xfdbfacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:05.0: reg 10 io port: [0x8480-0x8487]
pci 0000:00:05.0: reg 14 io port: [0x8400-0x8403]
pci 0000:00:05.0: reg 18 io port: [0x8080-0x8087]
pci 0000:00:05.0: reg 1c io port: [0x8000-0x8003]
pci 0000:00:05.0: reg 20 io port: [0x7c00-0x7c0f]
pci 0000:00:05.0: reg 24 32bit mmio: [0xfdbf9000-0xfdbf9fff]
pci 0000:00:05.1: reg 10 io port: [0x7880-0x7887]
pci 0000:00:05.1: reg 14 io port: [0x7800-0x7803]
pci 0000:00:05.1: reg 18 io port: [0x7480-0x7487]
pci 0000:00:05.1: reg 1c io port: [0x7400-0x7403]
pci 0000:00:05.1: reg 20 io port: [0x7080-0x708f]
pci 0000:00:05.1: reg 24 32bit mmio: [0xfdbf8000-0xfdbf8fff]
pci 0000:00:05.2: reg 10 io port: [0x7000-0x7007]
pci 0000:00:05.2: reg 14 io port: [0x6c00-0x6c03]
pci 0000:00:05.2: reg 18 io port: [0x6880-0x6887]
pci 0000:00:05.2: reg 1c io port: [0x6800-0x6803]
pci 0000:00:05.2: reg 20 io port: [0x6480-0x648f]
pci 0000:00:05.2: reg 24 32bit mmio: [0xfdbf7000-0xfdbf7fff]
pci 0000:00:08.0: reg 10 32bit mmio: [0xfdbf6000-0xfdbf6fff]
pci 0000:00:08.0: reg 14 io port: [0x6400-0x6407]
pci 0000:00:08.0: reg 18 32bit mmio: [0xfdbfa800-0xfdbfa8ff]
pci 0000:00:08.0: reg 1c 32bit mmio: [0xfdbfa400-0xfdbfa40f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xfdbf5000-0xfdbf5fff]
pci 0000:00:09.0: reg 14 io port: [0x6080-0x6087]
pci 0000:00:09.0: reg 18 32bit mmio: [0xfdbfa000-0xfdbfa0ff]
pci 0000:00:09.0: reg 1c 32bit mmio: [0xfdbf4c00-0xfdbf4c0f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:01:07.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:01:07.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:07.0: reg 18 32bit mmio: [0xfdcf0000-0xfdcfffff]
pci 0000:01:07.0: reg 30 32bit mmio: [0xfdcc0000-0xfdcdffff]
pci 0000:01:07.0: supports D1 D2
pci 0000:00:06.0: transparent bridge
pci 0000:00:06.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:00:0d.0: bridge io port: [0xa000-0xcfff]
pci 0000:00:0d.0: bridge 32bit mmio: [0xfdd00000-0xfdffffff]
pci 0000:03:00.0: bridge io port: [0xa000-0xafff]
pci 0000:03:00.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:05:04.0: reg 10 64bit mmio: [0xfdde0000-0xfddfffff]
pci 0000:05:04.0: reg 20 io port: [0xac00-0xac3f]
pci 0000:05:04.0: PME# supported from D0 D3hot D3cold
pci 0000:05:04.0: PME# disabled
pci 0000:05:04.1: reg 10 64bit mmio: [0xfddc0000-0xfdddffff]
pci 0000:05:04.1: reg 20 io port: [0xa880-0xa8bf]
pci 0000:05:04.1: PME# supported from D0 D3hot
pci 0000:05:04.1: PME# disabled
pci 0000:05:06.0: reg 10 64bit mmio: [0xfdda0000-0xfddbffff]
pci 0000:05:06.0: reg 20 io port: [0xa800-0xa83f]
pci 0000:05:06.0: PME# supported from D0 D3hot
pci 0000:05:06.0: PME# disabled
pci 0000:05:06.1: reg 10 64bit mmio: [0xfdd80000-0xfdd9ffff]
pci 0000:05:06.1: reg 20 io port: [0xa480-0xa4bf]
pci 0000:05:06.1: PME# supported from D0 D3hot
pci 0000:05:06.1: PME# disabled
pci 0000:04:00.0: bridge io port: [0xa000-0xafff]
pci 0000:04:00.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:03:00.1: bridge io port: [0xb000-0xcfff]
pci 0000:03:00.1: bridge 32bit mmio: [0xfde00000-0xfdffffff]
pci 0000:07:04.0: reg 10 64bit mmio: [0xfdee0000-0xfdefffff]
pci 0000:07:04.0: reg 20 io port: [0xbc00-0xbc3f]
pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:04.1: reg 10 64bit mmio: [0xfdec0000-0xfdedffff]
pci 0000:07:04.1: reg 20 io port: [0xb880-0xb8bf]
pci 0000:07:04.1: PME# supported from D0 D3hot
pci 0000:07:04.1: PME# disabled
pci 0000:07:06.0: reg 10 64bit mmio: [0xfdea0000-0xfdebffff]
pci 0000:07:06.0: reg 20 io port: [0xb800-0xb83f]
pci 0000:07:06.0: PME# supported from D0 D3hot
pci 0000:07:06.0: PME# disabled
pci 0000:07:06.1: reg 10 64bit mmio: [0xfde80000-0xfde9ffff]
pci 0000:07:06.1: reg 20 io port: [0xb480-0xb4bf]
pci 0000:07:06.1: PME# supported from D0 D3hot
pci 0000:07:06.1: PME# disabled
pci 0000:06:00.0: bridge io port: [0xb000-0xbfff]
pci 0000:06:00.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:08:04.0: reg 10 64bit mmio: [0xfdfe0000-0xfdffffff]
pci 0000:08:04.0: reg 20 io port: [0xcc00-0xcc3f]
pci 0000:08:04.0: PME# supported from D0 D3hot D3cold
pci 0000:08:04.0: PME# disabled
pci 0000:08:04.1: reg 10 64bit mmio: [0xfdfc0000-0xfdfdffff]
pci 0000:08:04.1: reg 20 io port: [0xc880-0xc8bf]
pci 0000:08:04.1: PME# supported from D0 D3hot
pci 0000:08:04.1: PME# disabled
pci 0000:08:06.0: reg 10 64bit mmio: [0xfdfa0000-0xfdfbffff]
pci 0000:08:06.0: reg 20 io port: [0xc800-0xc83f]
pci 0000:08:06.0: PME# supported from D0 D3hot
pci 0000:08:06.0: PME# disabled
pci 0000:08:06.1: reg 10 64bit mmio: [0xfdf80000-0xfdf9ffff]
pci 0000:08:06.1: reg 20 io port: [0xc480-0xc4bf]
pci 0000:08:06.1: PME# supported from D0 D3hot
pci 0000:08:06.1: PME# disabled
pci 0000:06:02.0: bridge io port: [0xc000-0xcfff]
pci 0000:06:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:0e.0: bridge io port: [0xd000-0xefff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:01.0: PME# disabled
pci 0000:09:00.0: bridge io port: [0xd000-0xefff]
pci 0000:09:00.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff]
pci 0000:0b:00.0: reg 10 32bit mmio: [0xfe8e0000-0xfe8fffff]
pci 0000:0b:00.0: reg 14 32bit mmio: [0xfe8c0000-0xfe8dffff]
pci 0000:0b:00.0: reg 18 io port: [0xdc00-0xdc1f]
pci 0000:0b:00.0: reg 30 32bit mmio: [0xfe8a0000-0xfe8bffff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:0b:00.1: reg 10 32bit mmio: [0xfe880000-0xfe89ffff]
pci 0000:0b:00.1: reg 14 32bit mmio: [0xfe860000-0xfe87ffff]
pci 0000:0b:00.1: reg 18 io port: [0xd880-0xd89f]
pci 0000:0b:00.1: reg 30 32bit mmio: [0xfe840000-0xfe85ffff]
pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.1: PME# disabled
pci 0000:0a:00.0: bridge io port: [0xd000-0xdfff]
pci 0000:0a:00.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff]
pci 0000:0c:00.0: reg 14 32bit mmio: [0xfe9c0000-0xfe9dffff]
pci 0000:0c:00.0: reg 18 io port: [0xec00-0xec1f]
pci 0000:0c:00.0: reg 30 32bit mmio: [0xfe9a0000-0xfe9bffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot
pci 0000:0c:00.0: PME# disabled
pci 0000:0c:00.1: reg 10 32bit mmio: [0xfe980000-0xfe99ffff]
pci 0000:0c:00.1: reg 14 32bit mmio: [0xfe960000-0xfe97ffff]
pci 0000:0c:00.1: reg 18 io port: [0xe880-0xe89f]
pci 0000:0c:00.1: reg 30 32bit mmio: [0xfe940000-0xfe95ffff]
pci 0000:0c:00.1: PME# supported from D0 D3hot
pci 0000:0c:00.1: PME# disabled
pci 0000:0a:01.0: bridge io port: [0xe000-0xefff]
pci 0000:0a:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:0d:00.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
pci 0000:0d:00.0: reg 30 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:0d:00.0: PME# supported from D0
pci 0000:0d:00.0: PME# disabled
pci 0000:00:0f.0: bridge 32bit mmio: [0xfea00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
SCSI subsystem initialized
libata version 3.00 loaded.
raid6: int64x1 1665 MB/s
raid6: int64x2 2230 MB/s
raid6: int64x4 2139 MB/s
raid6: int64x8 1492 MB/s
raid6: sse2x1 2302 MB/s
raid6: sse2x2 3361 MB/s
raid6: sse2x4 3480 MB/s
raid6: using algorithm sse2x4 (3480 MB/s)
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d8000000 size 131072 KB
init_memory_mapping: 00000000d8000000-00000000e0000000
00d8000000 - 00e0000000 page 2M
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x2000-0x207f has been reserved
system 00:08: ioport range 0x2080-0x20ff has been reserved
system 00:08: ioport range 0x2400-0x247f has been reserved
system 00:08: ioport range 0x2480-0x24ff has been reserved
system 00:08: ioport range 0x2800-0x287f has been reserved
system 00:08: ioport range 0x2880-0x28ff has been reserved
system 00:08: ioport range 0x2c00-0x2c7f has been reserved
system 00:08: ioport range 0x2c80-0x2cff has been reserved
system 00:08: iomem range 0xfdb80000-0xfdbbffff has been reserved
system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:0a: ioport range 0xca0-0xcaf has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: ioport range 0xa00-0xa7f has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xd7ffffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
pci 0000:00:06.0: IO window: 0x9000-0x9fff
pci 0000:00:06.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:06.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0: IO window: disabled
pci 0000:00:0a.0: MEM window: disabled
pci 0000:00:0a.0: PREFETCH window: disabled
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: 0xa000-0xafff
pci 0000:04:00.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:04:00.0: PREFETCH window: disabled
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0: IO window: 0xa000-0xafff
pci 0000:03:00.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:03:00.0: PREFETCH window: disabled
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: 0xb000-0xbfff
pci 0000:06:00.0: MEM window: 0xfde00000-0xfdefffff
pci 0000:06:00.0: PREFETCH window: disabled
pci 0000:06:02.0: PCI bridge, secondary bus 0000:08
pci 0000:06:02.0: IO window: 0xc000-0xcfff
pci 0000:06:02.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:06:02.0: PREFETCH window: disabled
pci 0000:03:00.1: PCI bridge, secondary bus 0000:06
pci 0000:03:00.1: IO window: 0xb000-0xcfff
pci 0000:03:00.1: MEM window: 0xfde00000-0xfdffffff
pci 0000:03:00.1: PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0d.0: IO window: 0xa000-0xcfff
pci 0000:00:0d.0: MEM window: 0xfdd00000-0xfdffffff
pci 0000:00:0d.0: PREFETCH window: disabled
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0: IO window: 0xd000-0xdfff
pci 0000:0a:00.0: MEM window: 0xfe800000-0xfe8fffff
pci 0000:0a:00.0: PREFETCH window: disabled
pci 0000:0a:01.0: PCI bridge, secondary bus 0000:0c
pci 0000:0a:01.0: IO window: 0xe000-0xefff
pci 0000:0a:01.0: MEM window: 0xfe900000-0xfe9fffff
pci 0000:0a:01.0: PREFETCH window: disabled
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0: IO window: 0xd000-0xefff
pci 0000:09:00.0: MEM window: 0xfe800000-0xfe9fffff
pci 0000:09:00.0: PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:0e.0: IO window: 0xd000-0xefff
pci 0000:00:0e.0: MEM window: 0xfe800000-0xfe9fffff
pci 0000:00:0e.0: PREFETCH window: disabled
pci 0000:00:0f.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:0f.0: IO window: disabled
pci 0000:00:0f.0: MEM window: 0xfea00000-0xfebfffff
pci 0000:00:0f.0: PREFETCH window: disabled
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:03:00.1: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:0a:01.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 0 io: [0xa000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfdffffff]
pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
pci_bus 0000:05: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:06: resource 0 io: [0xb000-0xcfff]
pci_bus 0000:06: resource 1 mem: [0xfde00000-0xfdffffff]
pci_bus 0000:07: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:07: resource 1 mem: [0xfde00000-0xfdefffff]
pci_bus 0000:08: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:08: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:09: resource 0 io: [0xd000-0xefff]
pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe9fffff]
pci_bus 0000:0a: resource 0 io: [0xd000-0xefff]
pci_bus 0000:0a: resource 1 mem: [0xfe800000-0xfe9fffff]
pci_bus 0000:0b: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:0b: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:0c: resource 0 io: [0xe000-0xefff]
pci_bus 0000:0c: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:0d: resource 1 mem: [0xfea00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NTFS driver 2.1.29 [Flags: R/W].
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 16137
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:01:07.0: Boot video device
pcieport-driver 0000:00:0a.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:0a.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0f.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:0f.0: setting latency timer to 64
pcieport-driver 0000:09:00.0: setting latency timer to 64
pcieport-driver 0000:0a:00.0: irq 28 for MSI/MSI-X
pcieport-driver 0000:0a:00.0: setting latency timer to 64
pcieport-driver 0000:0a:01.0: irq 29 for MSI/MSI-X
pcieport-driver 0000:0a:01.0: setting latency timer to 64
aer 0000:00:0a.0:pcie02: service driver aer loaded
aer 0000:00:0d.0:pcie02: service driver aer loaded
aer 0000:00:0e.0:pcie02: service driver aer loaded
aer 0000:00:0f.0:pcie02: service driver aer loaded
lp: driver loaded but no devices found
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Adaptec aacraid driver 1.1-5[2461]-ms
QLogic Fibre Channel HBA Driver: 8.03.01-k1
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x8480 ctl 0x8400 bmdma 0x7c00 irq 23
ata2: SATA max UDMA/133 cmd 0x8080 ctl 0x8000 bmdma 0x7c08 irq 23
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7080 irq 22
ata4: SATA max UDMA/133 cmd 0x7480 ctl 0x7400 bmdma 0x7088 irq 22
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x7000 ctl 0x6c00 bmdma 0x6480 irq 21
ata6: SATA max UDMA/133 cmd 0x6880 ctl 0x6800 bmdma 0x6488 irq 21
ata5: hard resetting link
ata5: nv: skipping hardreset on occupied port
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata5: SATA link down (SStatus 0 SControl 300)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ata5: EH complete
ata7: soft resetting link
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
e1000 0000:05:04.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8621, max UDMA/133
ata3.00: 62500000 sectors, multi 16: LBA48 NCQ (depth 31)
ata7.00: ATAPI: DW-224E-V, 1.CA, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
ata3.00: configured for UDMA/133
ata3: EH complete
ata1.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/33
ata1.00: configured for UDMA/133
ata1: EH complete
ata7: EH complete
scsi 0:0:0:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: hard resetting link
ata2: nv: skipping hardreset on occupied port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
scsi 2:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
sda1 sda2 sda3 sda4
ata4: SATA link down (SStatus 0 SControl 300)
ata4: EH complete
sd 2:0:0:0: [sdb] 62500000 512-byte hardware sectors: (32.0 GB/29.8 GiB)
ata6: hard resetting link
ata6: nv: skipping hardreset on occupied port
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:<6>ata6: SATA link down (SStatus 0 SControl 300)
ata6: EH complete
sdb1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] Attached SCSI disk
scsi 6:0:0:0: CD-ROM TEAC DW-224E-V 1.CA PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg2 type 5
ata8: port disabled. ignoring.
ata8: EH complete
e1000: 0000:05:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
e1000 0000:05:04.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
e1000: 0000:05:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17
e1000 0000:05:06.0: PCI INT A -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17
e1000: 0000:05:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f2
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 16
e1000 0000:05:06.1: PCI INT B -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:05:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f3
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:07:04.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
e1000: 0000:07:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b4
e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:07:04.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
e1000: 0000:07:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b5
e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:07:06.0: PCI INT A -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17
e1000: 0000:07:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b6
e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:07:06.1: PCI INT B -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:07:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b7
e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:08:04.0: PCI INT A -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17
e1000: 0000:08:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d4
e1000: eth8: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:08:04.1: PCI INT B -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:08:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d5
e1000: eth9: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:08:06.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
e1000: 0000:08:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d6
e1000: eth10: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:08:06.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
e1000: 0000:08:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d7
e1000: eth11: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:0b:00.0: PCI INT A -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:0b:00.0: setting latency timer to 64
e1000e 0000:0b:00.0: irq 30 for MSI/MSI-X
0000:0b:00.0: eth12: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c0
0000:0b:00.0: eth12: Intel(R) PRO/1000 Network Connection
0000:0b:00.0: eth12: MAC: 0, PHY: 4, PBA No: d47316-004
e1000e 0000:0b:00.1: PCI INT B -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
e1000e 0000:0b:00.1: setting latency timer to 64
e1000e 0000:0b:00.1: irq 31 for MSI/MSI-X
0000:0b:00.1: eth13: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c1
0000:0b:00.1: eth13: Intel(R) PRO/1000 Network Connection
0000:0b:00.1: eth13: MAC: 0, PHY: 4, PBA No: d47316-004
e1000e 0000:0c:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
e1000e 0000:0c:00.0: setting latency timer to 64
e1000e 0000:0c:00.0: irq 32 for MSI/MSI-X
0000:0c:00.0: eth14: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c2
0000:0c:00.0: eth14: Intel(R) PRO/1000 Network Connection
0000:0c:00.0: eth14: MAC: 0, PHY: 4, PBA No: d47316-004
e1000e 0000:0c:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:0c:00.1: setting latency timer to 64
e1000e 0000:0c:00.1: irq 33 for MSI/MSI-X
0000:0c:00.1: eth15: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c3
0000:0c:00.1: eth15: Intel(R) PRO/1000 Network Connection
0000:0c:00.1: eth15: MAC: 0, PHY: 4, PBA No: d47316-004
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:08.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:08.0: ifname eth16, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:b2:ac
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23
forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:09.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:09.0: ifname eth17, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:b2:ad
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
Fusion MPT misc device (ioctl) driver 3.04.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
input: AT Translated Set 2 keyboard as /class/input/input1
i2c-adapter i2c-1: Found a DME1737 chip at 0x2c (rev 0x8a).
dme1737 1-002c: Optional features: pwm3=no, pwm5=no, pwm6=no, fan3=no, fan4=no, fan5=no, fan6=no.
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
UDF-fs: No partition found (1)
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 400k freed
udev: renamed network interface eth16 to eth0
udev: renamed network interface eth17 to eth1
udev: renamed network interface eth4 to eth10
udev: renamed network interface eth5 to eth11
udev: renamed network interface eth6 to eth12
udev: renamed network interface eth7 to eth13
udev: renamed network interface eth8 to eth14
udev: renamed network interface eth9 to eth15
udev: renamed network interface eth0_rename to eth3
udev: renamed network interface eth10_rename to eth16
udev: renamed network interface eth12_rename to eth2
udev: renamed network interface eth11_rename to eth17
udev: renamed network interface eth13_rename to eth4
udev: renamed network interface eth14_rename to eth5
udev: renamed network interface eth1_rename to eth6
udev: renamed network interface eth15_rename to eth7
udev: renamed network interface eth3_rename to eth9
udev: renamed network interface eth2_rename to eth8
Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
forcedeth 0000:00:08.0: irq 34 for MSI/MSI-X
eth0: no link during initialization.
eth0: link up.
ata3: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen
ata3: SError: { PHYRdyChg LinkSeq TrStaTrns }
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link down (SStatus 0 SControl 300)
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link down (SStatus 0 SControl 300)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link down (SStatus 0 SControl 300)
ata3.00: disabled
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: EH complete
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] START_STOP FAILED
sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
ata3: SError: { PHYRdyChg CommWake }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8621, max UDMA/133
ata3.00: 62500000 sectors, multi 1: LBA48 NCQ (depth 31)
ata3.00: configured for UDMA/133
ata3: EH complete
scsi 2:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 62500000 512-byte hardware sectors: (32.0 GB/29.8 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
sdb: detected capacity change from 0 to 32000000000
Linux version 2.6.30-rc7.SMP.K8-64-test3-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #28 SMP Tue Jun 2 14:06:09 PDT 2009
Command line: BOOT_IMAGE=new ro root=803 console=ttyS1,9600n8 console=tty1 quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7ff0000 (usable)
BIOS-e820: 00000000d7ff0000 - 00000000d7ffe000 (ACPI data)
BIOS-e820: 00000000d7ffe000 - 00000000d8000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 0000000100000000 - 0000001028000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1028000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000D0000000 mask FFFFF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000001028000000 aka 66176M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xd7ff0 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000d7ff0000
Using GB pages for direct mapping
0000000000 - 00c0000000 page 1G
00c0000000 - 00d7e00000 page 2M
00d7e00000 - 00d7ff0000 page 4k
kernel direct mapping tables up to d7ff0000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000001028000000
Using GB pages for direct mapping
0100000000 - 1000000000 page 1G
1000000000 - 1028000000 page 2M
kernel direct mapping tables up to 1028000000 @ 12000-14000
ACPI: RSDP 00000000000f9af0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000d7ff0100 0003C (v01 100108 XSDT0856 20081001 MSFT 00000097)
ACPI: FACP 00000000d7ff0290 000F4 (v03 100108 FACP0856 20081001 MSFT 00000097)
ACPI: DSDT 00000000d7ff0470 04D4E (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
ACPI: FACS 00000000d7ffe000 00040
ACPI: MCFG 00000000d7ff0430 0003C (v01 100108 OEMMCFG 20081001 MSFT 00000097)
ACPI: HPET 00000000d7ff51c0 00038 (v01 100108 OEMHPET0 20081001 MSFT 00000097)
Scanning NUMA topology in Northbridge 24
Number of nodes 2
Node 0 MemBase 0000000000000000 Limit 0000000828000000
Node 1 MemBase 0000000828000000 Limit 0000001028000000
NUMA: Allocated memnodemap from 13000 - 13440
NUMA: Using 27 for the hash shift.
Using node hash shift of 27
found SMP MP-table at [ffff8800000ff780] ff780
Intel MultiProcessor Specification v1.1
MPTABLE: OEM ID: TEMPLATE
MPTABLE: Product ID: ETEMPLATE
MPTABLE: APIC at: 0xFEE00000
Bootmem setup node 0 0000000000000000-0000000828000000
NODE_DATA [0000000000013440 - 000000000001543f]
bootmap [00000000009b8000 - 0000000000abcfff] pages 105
(8 early reservations) ==> bootmem [0000000000 - 0828000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 00009b65e4] TEXT DATA BSS ==> [0000200000 - 00009b65e4]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [00009b7000 - 00009b7168] BRK ==> [00009b7000 - 00009b7168]
#5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
#7 [0000013000 - 0000013440] MEMNODEMAP ==> [0000013000 - 0000013440]
Bootmem setup node 1 0000000828000000-0000001028000000
NODE_DATA [0000000828000000 - 0000000828001fff]
bootmap [0000000828002000 - 0000000828101fff] pages 100
(8 early reservations) ==> bootmem [0828000000 - 1028000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 00009b65e4] TEXT DATA BSS
#3 [000009fc00 - 0000100000] BIOS reserved
#4 [00009b7000 - 00009b7168] BRK
#5 [0000010000 - 0000012000] PGTABLE
#6 [0000012000 - 0000013000] PGTABLE
#7 [0000013000 - 0000013440] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] ff780
[ffffe2001c8c0000-ffffe2001c9fffff] potential offnode page_structs
[ffffe20000000000-ffffe2001c9fffff] PMD -> [ffff880028200000-ffff8800443fffff] on node 0
[ffffe2001ca00000-ffffe200389fffff] PMD -> [ffff880828200000-ffff8808441fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01028000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000d7ff0
0: 0x00100000 -> 0x00828000
1: 0x00828000 -> 0x01028000
On node 0 totalpages: 8388479
DMA zone: 56 pages used for memmap
DMA zone: 2076 pages reserved
DMA zone: 1851 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 866344 pages, LIFO batch:31
Normal zone: 102592 pages used for memmap
Normal zone: 7401280 pages, LIFO batch:31
On node 1 totalpages: 8388608
Normal zone: 114688 pages used for memmap
Normal zone: 8273920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x2008
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 16
Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:2
PERCPU: Embedded 22 pages at ffff880028035000, static data 69216 bytes
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 16543395
Policy zone: Normal
Kernel command line: BOOT_IMAGE=new ro root=803 console=ttyS1,9600n8 console=tty1 quiet
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2300.478 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS1] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ d8000000 size 128 MB
Node 1: aperture @ d8000000 size 128 MB
Memory: 66180380k/67764224k available (4081k kernel code, 655876k absent, 927968k reserved, 1867k data, 400k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.95 BogoMIPS (lpj=9201900)
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
SMP alternatives: switching to UP code
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20090320
ACPI: setting ELCR to 0200 (from 0ca0)
Setting APIC routing to flat
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Setting APIC routing to flat
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4600.95 BogoMIPS).
net_namespace: 1352 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 9153.000 MB/sec
xor: using function: generic_sse (9153.000 MB/sec)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d8000000 aka 3456M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d8000000, dfffffff]
TOM2: 0000001028000000 aka 66176M
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [f0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [d8000000, dfffffff]
bus: 00 index 4 mmio: [1028000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2f7f]
pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfe8fac00-0xfe8facff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:05.0: reg 10 io port: [0xb480-0xb487]
pci 0000:00:05.0: reg 14 io port: [0xb400-0xb403]
pci 0000:00:05.0: reg 18 io port: [0xb080-0xb087]
pci 0000:00:05.0: reg 1c io port: [0xb000-0xb003]
pci 0000:00:05.0: reg 20 io port: [0xac00-0xac0f]
pci 0000:00:05.0: reg 24 32bit mmio: [0xfe8f9000-0xfe8f9fff]
pci 0000:00:05.1: reg 10 io port: [0xa880-0xa887]
pci 0000:00:05.1: reg 14 io port: [0xa800-0xa803]
pci 0000:00:05.1: reg 18 io port: [0xa480-0xa487]
pci 0000:00:05.1: reg 1c io port: [0xa400-0xa403]
pci 0000:00:05.1: reg 20 io port: [0xa080-0xa08f]
pci 0000:00:05.1: reg 24 32bit mmio: [0xfe8f8000-0xfe8f8fff]
pci 0000:00:05.2: reg 10 io port: [0xa000-0xa007]
pci 0000:00:05.2: reg 14 io port: [0x9c00-0x9c03]
pci 0000:00:05.2: reg 18 io port: [0x9880-0x9887]
pci 0000:00:05.2: reg 1c io port: [0x9800-0x9803]
pci 0000:00:05.2: reg 20 io port: [0x9480-0x948f]
pci 0000:00:05.2: reg 24 32bit mmio: [0xfe8f7000-0xfe8f7fff]
pci 0000:00:08.0: reg 10 32bit mmio: [0xfe8f6000-0xfe8f6fff]
pci 0000:00:08.0: reg 14 io port: [0x9400-0x9407]
pci 0000:00:08.0: reg 18 32bit mmio: [0xfe8fa800-0xfe8fa8ff]
pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe8fa400-0xfe8fa40f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xfe8f5000-0xfe8f5fff]
pci 0000:00:09.0: reg 14 io port: [0x9080-0x9087]
pci 0000:00:09.0: reg 18 32bit mmio: [0xfe8fa000-0xfe8fa0ff]
pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe8f4c00-0xfe8f4c0f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:01:07.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:01:07.0: reg 14 io port: [0xc000-0xc0ff]
pci 0000:01:07.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff]
pci 0000:01:07.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
pci 0000:01:07.0: supports D1 D2
pci 0000:00:06.0: transparent bridge
pci 0000:00:06.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:00:06.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:0f.0: bridge io port: [0xd000-0xefff]
pci 0000:00:0f.0: bridge 32bit mmio: [0xfea00000-0xfebfffff]
pci 0000:08:02.0: PME# supported from D0 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:08:04.0: PME# supported from D0 D3hot D3cold
pci 0000:08:04.0: PME# disabled
pci 0000:07:00.0: bridge io port: [0xd000-0xefff]
pci 0000:07:00.0: bridge 32bit mmio: [0xfea00000-0xfebfffff]
pci 0000:09:00.0: reg 10 32bit mmio: [0xfeae0000-0xfeafffff]
pci 0000:09:00.0: reg 14 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:09:00.0: reg 18 io port: [0xdc00-0xdc1f]
pci 0000:09:00.0: reg 30 32bit mmio: [0xfeaa0000-0xfeabffff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.1: reg 10 32bit mmio: [0xfea80000-0xfea9ffff]
pci 0000:09:00.1: reg 14 32bit mmio: [0xfea60000-0xfea7ffff]
pci 0000:09:00.1: reg 18 io port: [0xd880-0xd89f]
pci 0000:09:00.1: reg 30 32bit mmio: [0xfea40000-0xfea5ffff]
pci 0000:09:00.1: PME# supported from D0 D3hot D3cold
pci 0000:09:00.1: PME# disabled
pci 0000:08:02.0: bridge io port: [0xd000-0xdfff]
pci 0000:08:02.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:0a:00.0: reg 10 32bit mmio: [0xfebe0000-0xfebfffff]
pci 0000:0a:00.0: reg 14 32bit mmio: [0xfebc0000-0xfebdffff]
pci 0000:0a:00.0: reg 18 io port: [0xec00-0xec1f]
pci 0000:0a:00.0: reg 30 32bit mmio: [0xfeba0000-0xfebbffff]
pci 0000:0a:00.0: PME# supported from D0 D3hot
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:00.1: reg 10 32bit mmio: [0xfeb80000-0xfeb9ffff]
pci 0000:0a:00.1: reg 14 32bit mmio: [0xfeb60000-0xfeb7ffff]
pci 0000:0a:00.1: reg 18 io port: [0xe880-0xe89f]
pci 0000:0a:00.1: reg 30 32bit mmio: [0xfeb40000-0xfeb5ffff]
pci 0000:0a:00.1: PME# supported from D0 D3hot
pci 0000:0a:00.1: PME# disabled
pci 0000:08:04.0: bridge io port: [0xe000-0xefff]
pci 0000:08:04.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 5 *7 10 11 14)
ACPI: PCI Interrupt Link [LNEB] (IRQs *5 7 10 11 14)
ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LUB0] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAD] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 10 11 14)
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 10 *11 14)
ACPI: PCI Interrupt Link [LSA1] (IRQs *5 10 11 14)
ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 *10 11 14)
SCSI subsystem initialized
libata version 3.00 loaded.
raid6: int64x1 2193 MB/s
raid6: int64x2 2997 MB/s
raid6: int64x4 3054 MB/s
raid6: int64x8 1805 MB/s
raid6: sse2x1 3041 MB/s
raid6: sse2x2 5193 MB/s
raid6: sse2x4 5916 MB/s
raid6: using algorithm sse2x4 (5916 MB/s)
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d8000000 size 131072 KB
init_memory_mapping: 00000000d8000000-00000000e0000000
00d8000000 - 00e0000000 page 2M
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
Switched to high resolution mode on CPU 0
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x2000-0x207f has been reserved
system 00:08: ioport range 0x2080-0x20ff has been reserved
system 00:08: ioport range 0x2400-0x247f has been reserved
system 00:08: ioport range 0x2480-0x24ff has been reserved
system 00:08: ioport range 0x2800-0x287f has been reserved
system 00:08: ioport range 0x2880-0x28ff has been reserved
system 00:08: ioport range 0x2c00-0x2c7f has been reserved
system 00:08: ioport range 0x2c80-0x2cff has been reserved
system 00:08: iomem range 0xfe880000-0xfe8bffff has been reserved
system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:0a: ioport range 0xca0-0xcaf has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: ioport range 0xa00-0xa7f has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xd7ffffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
pci 0000:00:06.0: IO window: 0xc000-0xcfff
pci 0000:00:06.0: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:06.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0: IO window: disabled
pci 0000:00:0a.0: MEM window: disabled
pci 0000:00:0a.0: PREFETCH window: disabled
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0: IO window: disabled
pci 0000:03:00.0: MEM window: disabled
pci 0000:03:00.0: PREFETCH window: disabled
pci 0000:03:00.1: PCI bridge, secondary bus 0000:05
pci 0000:03:00.1: IO window: disabled
pci 0000:03:00.1: MEM window: disabled
pci 0000:03:00.1: PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0d.0: IO window: disabled
pci 0000:00:0d.0: MEM window: disabled
pci 0000:00:0d.0: PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0e.0: IO window: disabled
pci 0000:00:0e.0: MEM window: disabled
pci 0000:00:0e.0: PREFETCH window: disabled
pci 0000:08:02.0: PCI bridge, secondary bus 0000:09
pci 0000:08:02.0: IO window: 0xd000-0xdfff
pci 0000:08:02.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:08:02.0: PREFETCH window: disabled
pci 0000:08:04.0: PCI bridge, secondary bus 0000:0a
pci 0000:08:04.0: IO window: 0xe000-0xefff
pci 0000:08:04.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:08:04.0: PREFETCH window: disabled
pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
pci 0000:07:00.0: IO window: 0xd000-0xefff
pci 0000:07:00.0: MEM window: 0xfea00000-0xfebfffff
pci 0000:07:00.0: PREFETCH window: disabled
pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07
pci 0000:00:0f.0: IO window: 0xd000-0xefff
pci 0000:00:0f.0: MEM window: 0xfea00000-0xfebfffff
pci 0000:00:0f.0: PREFETCH window: disabled
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:03:00.1: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:07:00.0: setting latency timer to 64
pci 0000:08:02.0: setting latency timer to 64
pci 0000:08:04.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:07: resource 0 io: [0xd000-0xefff]
pci_bus 0000:07: resource 1 mem: [0xfea00000-0xfebfffff]
pci_bus 0000:08: resource 0 io: [0xd000-0xefff]
pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfebfffff]
pci_bus 0000:09: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:09: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:0a: resource 0 io: [0xe000-0xefff]
pci_bus 0000:0a: resource 1 mem: [0xfeb00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NTFS driver 2.1.29 [Flags: R/W].
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 32768
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:01:07.0: Boot video device
pcieport-driver 0000:00:0a.0: irq 16 for MSI/MSI-X
pcieport-driver 0000:00:0a.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: irq 17 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: irq 18 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0f.0: irq 19 for MSI/MSI-X
pcieport-driver 0000:00:0f.0: setting latency timer to 64
pcieport-driver 0000:07:00.0: setting latency timer to 64
pcieport-driver 0000:08:02.0: irq 20 for MSI/MSI-X
pcieport-driver 0000:08:02.0: setting latency timer to 64
pcieport-driver 0000:08:04.0: irq 21 for MSI/MSI-X
pcieport-driver 0000:08:04.0: setting latency timer to 64
aer 0000:00:0a.0:pcie02: service driver aer loaded
aer 0000:00:0d.0:pcie02: service driver aer loaded
aer 0000:00:0e.0:pcie02: service driver aer loaded
aer 0000:00:0f.0:pcie02: service driver aer loaded
aer 0000:08:02.0:pcie22: service driver aer loaded
aer 0000:08:04.0:pcie22: service driver aer loaded
lp: driver loaded but no devices found
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Adaptec aacraid driver 1.1-5[2461]-ms
QLogic Fibre Channel HBA Driver: 8.03.01-k1
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 11 (level, low) -> IRQ 11
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 11
ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 11
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 5 (level, low) -> IRQ 5
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
ata1: hard resetting link
ata1: nv: skipping hardreset on occupied port
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 5
ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 5
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 10 (level, low) -> IRQ 10
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link down (SStatus 0 SControl 300)
ata3: EH complete
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 10
ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 10
ata5: hard resetting link
ata5: nv: skipping hardreset on occupied port
ata5: SATA link down (SStatus 0 SControl 300)
ata5: EH complete
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ata7: soft resetting link
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
e1000e 0000:09:00.0: PCI INT B -> Link[LNEA] -> GSI 7 (level, low) -> IRQ 7
e1000e 0000:09:00.0: setting latency timer to 64
e1000e 0000:09:00.0: irq 22 for MSI/MSI-X
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST31000340NS, RS03, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA ST31000340NS RS03 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: hard resetting link
ata2: nv: skipping hardreset on occupied port
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
0000:09:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9d
0000:09:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:09:00.0: eth0: MAC: 0, PHY: 4, PBA No: d64202-004
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 10
e1000e 0000:09:00.1: PCI INT A -> Link[LNED] -> GSI 10 (level, low) -> IRQ 10
e1000e 0000:09:00.1: setting latency timer to 64
e1000e 0000:09:00.1: irq 23 for MSI/MSI-X
ata7.00: ATAPI: TEAC DV-W28E-R, 1.0A, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
ata7.00: configured for UDMA/33
ata7: EH complete
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8621, max UDMA/133
ata2.00: 62500000 sectors, multi 16: LBA48 NCQ (depth 31)
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 62500000 512-byte hardware sectors: (32.0 GB/29.8 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link down (SStatus 0 SControl 300)
ata4: EH complete
ata6: hard resetting link
ata6: nv: skipping hardreset on occupied port
ata6: SATA link down (SStatus 0 SControl 300)
ata6: EH complete
unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
0000:09:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9c
0000:09:00.1: eth1: Intel(R) PRO/1000 Network Connection
0000:09:00.1: eth1: MAC: 0, PHY: 4, PBA No: d64202-004
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 11
e1000e 0000:0a:00.0: PCI INT B -> Link[LNEC] -> GSI 11 (level, low) -> IRQ 11
e1000e 0000:0a:00.0: setting latency timer to 64
e1000e 0000:0a:00.0: irq 24 for MSI/MSI-X
scsi 6:0:0:0: CD-ROM TEAC DV-W28E-R 1.0A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg2 type 5
ata8: port disabled. ignoring.
ata8: EH complete
0000:0a:00.0: eth2: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9f
0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection
0000:0a:00.0: eth2: MAC: 0, PHY: 4, PBA No: d64202-004
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 5
e1000e 0000:0a:00.1: PCI INT A -> Link[LNEB] -> GSI 5 (level, low) -> IRQ 5
e1000e 0000:0a:00.1: setting latency timer to 64
e1000e 0000:0a:00.1: irq 25 for MSI/MSI-X
0000:0a:00.1: eth3: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9e
0000:0a:00.1: eth3: Intel(R) PRO/1000 Network Connection
0000:0a:00.1: eth3: MAC: 0, PHY: 4, PBA No: d64202-004
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 10 (level, low) -> IRQ 10
forcedeth 0000:00:08.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:08.0: ifname eth4, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:95:aa
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 11
forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:09.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:09.0: ifname eth5, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:95:ab
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
Fusion MPT misc device (ioctl) driver 3.04.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
input: AT Translated Set 2 keyboard as /class/input/input1
i2c-adapter i2c-1: Found a DME1737 chip at 0x2c (rev 0x8a).
dme1737 1-002c: Optional features: pwm3=no, pwm5=no, pwm6=no, fan3=no, fan4=no, fan5=no, fan6=no.
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
oprofile: AMD IBS detected
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
UDF-fs: No partition found (1)
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 400k freed
Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X
eth4: no link during initialization.
warning: `ntpd' uses 32-bit capabilities (legacy support in use)

Next message: Magnus Damm: "Re: [PATCH] Driver Core: Add platform device arch data V2"
Previous message: Paul Mackerras: "[PATCH] perf_counter: Fix lockup with interrupting counters"
Next in thread: Yinghai Lu: "Re: only a single core (out of 8) initialized"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]