[PATCH v2 for 2.6.32] SFI - Simple Firmware Interface support

From: Len Brown
Date: Wed Jul 08 2009 - 00:15:41 EST

Next message: Len Brown: "[PATCH 09/12] SFI: Enable SFI to parse ACPI tables"
Previous message: Len Brown: "[PATCH 03/12] SFI: document boot param "sfi=off""
Next in thread: Len Brown: "[PATCH 01/12] SFI: Simple Firmware Interface - new MAINTAINERS entry"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Here is version 2 of the SFI patch series for Linux 2.6.32.
This series is based on 2.6.31-rc2, and is available in git:

git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git sfi-test

We've tried to respond to all feedback on the v1 series.
In particular, thanks to Ingo Molnar and Andi Kleen for their thorough review.

We followed Andi's advice and deleted the data structure
to track tables, and instead we access all table headers in-place.
Indeed, this shrunk the memory footprint a bit.

We also now detect and optimize for the common case
where all SFI tables fit on a single page.

We added some small bits from the upcoming draft of SFI 0.7,
which should be available on http://simplefirmware.org shortly.
Of note, we can assert that the SYST shall not cross a 4K boundary.

Thanks,
-Len Brown & Tang-Feng, Intel Open Source Technology Center

---
Documentation/kernel-parameters.txt | 5 +
MAINTAINERS | 12 +
arch/x86/Kconfig | 4 +-
arch/x86/include/asm/io_apic.h | 3 +-
arch/x86/kernel/Makefile | 1 +
arch/x86/kernel/acpi/boot.c | 22 --
arch/x86/kernel/apic/io_apic.c | 28 ++-
arch/x86/kernel/e820.c | 5 +
arch/x86/kernel/setup.c | 3 +
arch/x86/kernel/sfi.c | 284 +++++++++++++++++++++++++
arch/x86/pci/mmconfig-shared.c | 5 +-
drivers/Makefile | 1 +
drivers/acpi/tables.c | 3 +
drivers/sfi/Kconfig | 16 ++
drivers/sfi/Makefile | 3 +
drivers/sfi/sfi_acpi.c | 151 ++++++++++++++
drivers/sfi/sfi_core.c | 387 +++++++++++++++++++++++++++++++++++
drivers/sfi/sfi_core.h | 44 ++++
include/linux/sfi.h | 198 ++++++++++++++++++
include/linux/sfi_acpi.h | 60 ++++++
init/main.c | 2 +
21 files changed, 1204 insertions(+), 33 deletions(-)
create mode 100644 arch/x86/kernel/sfi.c
create mode 100644 drivers/sfi/Kconfig
create mode 100644 drivers/sfi/Makefile
create mode 100644 drivers/sfi/sfi_acpi.c
create mode 100644 drivers/sfi/sfi_core.c
create mode 100644 drivers/sfi/sfi_core.h
create mode 100644 include/linux/sfi.h
create mode 100644 include/linux/sfi_acpi.h

commits:

Feng Tang (10):
SFI, x86: add CONFIG_SFI
SFI: document boot param "sfi=off"
SFI: create include/linux/sfi.h
SFI: add core support
ACPI, x86: remove ACPI dependency on some IO-APIC routines
SFI: add x86 support
SFI, x86: hook e820() for memory map initialization
SFI: Enable SFI to parse ACPI tables
SFI, PCI: Hook MMCONFIG
SFI: add boot-time initialization hooks

Len Brown (2):
SFI: Simple Firmware Interface - new MAINTAINERS entry
ACPI: check acpi_disabled in acpi_table_parse()

with this log:

commit 7d8801c4e11f26a68fca70798dc40d5f405b4be2
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 23:34:39 2009 -0400

SFI: add boot-time initialization hooks

There are two SFI boot-time hooks:

sfi_init() maps the SYST using early_ioremap() and validates all the tables.

sfi_init_late() re-maps SYST with ioremap(), and initializes
the ACPI extension, if present.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 24fe646fcbbd9049850de4ac57cf6a67846b38c4
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 23:30:32 2009 -0400

SFI, PCI: Hook MMCONFIG

First check ACPI, and if that fails, ask SFI to find the MCFG.

Cc: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 4e176b0f00143e2dfca4480402d3b27b3a0f835f
Author: Len Brown <len.brown@xxxxxxxxx>
Date: Tue Jul 7 23:22:58 2009 -0400

ACPI: check acpi_disabled in acpi_table_parse()

Allow consumers of the acpi_table_parse() API
to gracefully handle the acpi_disabled=1 case
without checking the flag themselves.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 5ab9dd34acc6209c5b6a3c754075e408e5298a2d
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 23:15:22 2009 -0400

SFI: Enable SFI to parse ACPI tables

Extend SFI to access standard ACPI tables.
(eg. the PCI MCFG) using sfi_acpi_table_parse().

Note that this is _not_ a hybrid ACPI + SFI mode.
The platform boots in either ACPI mode or SFI mode.

SFI runs only with acpi_disabled=1, which can be set
at build-time via CONFIG_ACPI=n, or at boot time by
the failure to find ACPI platform support.

So this extension simply allows SFI-platforms to
re-use existing standard table formats that happen to
be defined to live in ACPI envelopes.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 5bf6b3c7c08a76ea8dc52e9e07728c2958938952
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 23:11:44 2009 -0400

SFI, x86: hook e820() for memory map initialization

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 4676b1fee4cae65c678754fbdecae626ac161b81
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 23:09:19 2009 -0400

SFI: add x86 support

arch/x86/kernel/sfi.c serves the dual-purpose of supporting the
SFI core with arch specific code, as well as a home for the
arch-specific code that uses SFI.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit bf8ea7cda3ad3f287f1c9164d366a94eae07a4a5
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 23:01:15 2009 -0400

ACPI, x86: remove ACPI dependency on some IO-APIC routines

Both ACPI and SFI x86 systems will use these io_apic routines:

uniq_ioapic_id(u8 id);
io_apic_get_unique_id(int ioapic, int apic_id);
io_apic_get_version(int ioapic);
io_apic_get_redir_entries(int ioapic);

so move the 1st from acpi/boot.c to io_apic.c,
and remove the #ifdef ACPI around the other three.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 10fb28adc204382cb3b1acc99eabbb369d378a0f
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 22:54:22 2009 -0400

SFI: add core support

drivers/sfi/sfi_core.c contains the generic SFI implementation.
It has a private header, sfi_core.h, for its own use and the
private use of future files in drivers/sfi/

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 56f1291c60859b65ac62521e7fe4b82e73205ef6
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 22:39:49 2009 -0400

SFI: create include/linux/sfi.h

include/linux/include/sfi.h defines everything that customers
of SFI need to know in order to use the SFI suport in the kernel.

The primary API is sfi_table_parse(), where a driver or another part
of the kernel can supply a handler to parse the named table.

sfi.h also includes the currently defined table signatures and table formats.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 57dac60d76c191e3bd72f186833fac01e4c5f8f1
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 22:33:09 2009 -0400

SFI: document boot param "sfi=off"

"sfi=off" is analogous to "acpi=off"

In practice, "sfi=off" isn't likely to be very useful, for
1. SFI is used only when ACPI is not available
2. Today's SFI systems are not legacy PC-compatible

ie. "sfi=off" on an ACPI-platform is a NO-OP,
and "sfi=off" on an SFI-platform will likely result in boot failure.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit d5a8e3203627c313e8fdbf4fa9ac1cb1cdc6706c
Author: Feng Tang <feng.tang@xxxxxxxxx>
Date: Tue Jul 7 22:30:29 2009 -0400

SFI, x86: add CONFIG_SFI

analogous to ACPI, drivers/sfi/Kconfig is pulled in by arch/x86/Kconfig

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

commit 8e4a93858bce74ed3080dd607aa471023f1a2737
Author: Len Brown <len.brown@xxxxxxxxx>
Date: Tue Jul 7 22:25:46 2009 -0400

SFI: Simple Firmware Interface - new MAINTAINERS entry

CONFIG_SFI=y shall enable the kernel to boot and run optimally
on platforms that support the Simple Firmware Interface.

Thanks to Jacob Pan for prototyping the initial Linux SFI support,
and to Feng Tang for Linux bring-up and debug both in emulation
and on Moorestown hardware.

See http://simplefirmware.org for more information on SFI.

Signed-off-by: Len Brown <len.brown@xxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Len Brown: "[PATCH 09/12] SFI: Enable SFI to parse ACPI tables"
Previous message: Len Brown: "[PATCH 03/12] SFI: document boot param "sfi=off""
Next in thread: Len Brown: "[PATCH 01/12] SFI: Simple Firmware Interface - new MAINTAINERS entry"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]