Re: Input : regression - touchpad not detected
From: Dave Young
Date: Mon Jul 20 2009 - 01:27:27 EST
On Fri, Jul 17, 2009 at 12:01:33PM +0200, Jiri Kosina wrote:
> On Fri, 17 Jul 2009, Dave Young wrote:
>
> > Hi,
> >
> > since 2.6.31-rc3, sometimes the touchpad of my laptop will not be
> > detected, usually after reboot it will be there.
> >
> > I have no such problem with 2.6.31-rc2
> >
> > `dmesg|grep input` with touchpad detected:
> >
> > [ 2.447119] input: Lid Switch as
> > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> > [ 2.458089] input: Power Button as
> > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> > [ 2.459155] input: Sleep Button as
> > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> > [ 3.093556] input: Video Bus as
> > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input3
> > [ 3.120647] input: Video Bus as
> > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3b/input/input4
> > [ 5.300364] input: AT Translated Set 2 keyboard as
> > /devices/platform/i8042/serio0/input/input5
> > [ 5.669278] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
> > [ 5.698278] input: AlpsPS/2 ALPS GlidePoint as
> > /devices/platform/i8042/serio1/input/input7
> >
> > `dmesg|grep input` without touchpad detected:
> >
> > [ 2.454246] input: Lid Switch as
> > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> > [ 2.478038] input: Power Button as
> > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> > [ 2.487538] input: Sleep Button as
> > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> > [ 3.118063] input: Video Bus as
> > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input3
> > [ 3.164064] input: Video Bus as
> > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3b/input/input4
> > [ 5.353006] input: AT Translated Set 2 keyboard as
> > /devices/platform/i8042/serio0/input/input5
>
> Providing the dmesg output with 'i8042.debug' kernel parameter in place
> from the situation the TouchPad doesn't get detected might be helpful.
I got the debug message, please see:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc3 (dave@darkstar) (gcc version 4.2.4) #91 SMP Fri Jul 17 21:54:40 CST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003d38d400 (usable)
[ 0.000000] BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 03DC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 03DB00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000003db00000 - 0000000040000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000fbd10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 3d391e00 0006C (v01 DELL M09 27D90219 ASL 00000061)
[ 0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D90219 ASL 00000061)
[ 0.000000] ACPI: DSDT 3d392400 06357 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 3d3a0c00 00040
[ 0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D90219 ASL 00000061)
[ 0.000000] ACPI: APIC 3d392000 00068 (v01 DELL M09 27D90219 ASL 00000047)
[ 0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D90219 ASL 00000061)
[ 0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D90219 ASL 00000061)
[ 0.000000] ACPI: TCPA 3d392300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: BOOT 3d391bc0 00028 (v01 DELL M09 27D90219 ASL 00000061)
[ 0.000000] ACPI: SSDT 3d3902eb 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 91MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 0001afc5a4] TEXT DATA BSS ==> [0001000000 - 0001afc5a4]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001afd000 - 0001b0517c] BRK ==> [0001afd000 - 0001b0517c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003d38d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003d38d
[ 0.000000] On node 0 totalpages: 250668
[ 0.000000] free_area_init_node: node 0, pgdat c153ab80, node_mem_map c1b06000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 184 pages used for memmap
[ 0.000000] HighMem zone: 23255 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages at c22b9000, static data 30236 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 248708
[ 0.000000] Kernel command line: BOOT_IMAGE=test ro root=802 vt.default_utf8=0 resume=/dev/sda8 i8042.debug=1
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003d38d)
[ 0.000000] Memory: 982360k/1003060k available (3317k kernel code, 20096k reserved, 2149k data, 364k init, 93756k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff90000 - 0xfffff000 ( 444 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc155d000 - 0xc15b8000 ( 364 kB)
[ 0.000000] .data : 0xc133d5a1 - 0xc1556aa0 (2149 kB)
[ 0.000000] .text : 0xc1000000 - 0xc133d5a1 (3317 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.019 MHz processor.
[ 0.000039] Console: colour dummy device 80x25
[ 0.000056] console [tty0] enabled
[ 0.002134] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.002141] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.002146] ... MAX_LOCK_DEPTH: 48
[ 0.002151] ... MAX_LOCKDEP_KEYS: 8191
[ 0.002156] ... CLASSHASH_SIZE: 4096
[ 0.002161] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.002166] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.002170] ... CHAINHASH_SIZE: 16384
[ 0.002175] memory used by lock dependency info: 3487 kB
[ 0.002181] per task-struct memory footprint: 1152 bytes
[ 0.002650] hpet clockevent registered
[ 0.002659] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.002679] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.28 BogoMIPS (lpj=6650063)
[ 0.002841] Security Framework initialized
[ 0.002892] Mount-cache hash table entries: 512
[ 0.003333] Initializing cgroup subsys ns
[ 0.003333] Initializing cgroup subsys cpuacct
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 2048K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] using mwait in idle threads.
[ 0.003333] Performance Counters: Core2 events, Intel PMU driver.
[ 0.003333] ... version: 2
[ 0.003333] ... bit width: 40
[ 0.003333] ... generic counters: 2
[ 0.003333] ... value mask: 000000ffffffffff
[ 0.003333] ... max period: 000000007fffffff
[ 0.003333] ... fixed-purpose counters: 3
[ 0.003333] ... counter mask: 0000000700000003
[ 0.003333] Checking 'hlt' instruction... OK.
[ 0.014613] ACPI: Core revision 20090521
[ 0.096994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130031] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 0.133332] lockdep: fixing up alternatives.
[ 0.133332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 3991.22 BogoMIPS (lpj=6649953)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 2048K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.224988] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 0.225034] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.226756] Brought up 2 CPUs
[ 0.226763] Total of 2 processors activated (7983.51 BogoMIPS).
[ 0.231327] khelper used greatest stack depth: 6804 bytes left
[ 0.233522] Booting paravirtualized kernel on bare hardware
[ 0.233855] regulator: core version 0.5
[ 0.233931] Time: 13:12:21 Date: 07/20/09
[ 0.233931] NET: Registered protocol family 16
[ 0.240275] ACPI: bus type pci registered
[ 0.240553] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.240553] PCI: MCFG area at f8000000 reserved in E820
[ 0.240553] PCI: Using MMCONFIG for extended config space
[ 0.240553] PCI: Using configuration type 1 for base access
[ 0.246739] khelper used greatest stack depth: 6768 bytes left
[ 0.297310] bio: create slab <bio-0> at 0
[ 0.304200] ACPI: EC: Look up EC in DSDT
[ 0.307193] ACPI: BIOS _OSI(Linux) query ignored
[ 0.478072] ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
[ 0.631246] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.650698] ACPI: Interpreter enabled
[ 0.650708] ACPI: (supports S0 S3 S4 S5)
[ 0.651055] ACPI: Using IOAPIC for interrupt routing
[ 1.200583] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 1.200594] ACPI: EC: driver started in interrupt mode
[ 1.208072] ACPI: No dock devices found.
[ 1.382843] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.383761] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 1.383775] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 1.383784] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
[ 1.383884] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 1.384114] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 1.384276] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 1.384437] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 1.384600] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 1.384706] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.384718] pci 0000:00:1a.7: PME# disabled
[ 1.384827] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff]
[ 1.384929] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.384940] pci 0000:00:1b.0: PME# disabled
[ 1.385097] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.385108] pci 0000:00:1c.0: PME# disabled
[ 1.385268] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.385279] pci 0000:00:1c.1: PME# disabled
[ 1.385444] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.385455] pci 0000:00:1c.4: PME# disabled
[ 1.385592] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 1.385753] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 1.385914] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 1.386077] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 1.386182] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.386194] pci 0000:00:1d.7: PME# disabled
[ 1.386598] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 1.386610] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 1.386622] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 1.386634] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 1.386646] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6eaf]
[ 1.386657] pci 0000:00:1f.2: reg 24 io port: [0x6e90-0x6e9f]
[ 1.386992] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff]
[ 1.387021] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 1.387137] pci 0000:00:1f.5: reg 10 io port: [0x6eb0-0x6eb7]
[ 1.387149] pci 0000:00:1f.5: reg 14 io port: [0x6eb8-0x6ebb]
[ 1.387161] pci 0000:00:1f.5: reg 18 io port: [0x6ec0-0x6ec7]
[ 1.387173] pci 0000:00:1f.5: reg 1c io port: [0x6ec8-0x6ecb]
[ 1.387184] pci 0000:00:1f.5: reg 20 io port: [0x6ee0-0x6eef]
[ 1.387196] pci 0000:00:1f.5: reg 24 io port: [0xeff0-0xefff]
[ 1.387814] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff]
[ 1.388078] pci 0000:0c:00.0: supports D1 D2
[ 1.388081] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 1.388099] pci 0000:0c:00.0: PME# disabled
[ 1.388269] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 1.388472] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68f0000-0xf68fffff]
[ 1.388624] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 1.388636] pci 0000:09:00.0: PME# disabled
[ 1.388763] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff]
[ 1.388874] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 1.388911] pci 0000:02:01.0: supports D1 D2
[ 1.388914] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.388925] pci 0000:02:01.0: PME# disabled
[ 1.389013] pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff]
[ 1.389102] pci 0000:02:01.1: supports D1 D2
[ 1.389105] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.389117] pci 0000:02:01.1: PME# disabled
[ 1.389203] pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff600-0xf67ff6ff]
[ 1.389294] pci 0000:02:01.2: supports D1 D2
[ 1.389297] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.389308] pci 0000:02:01.2: PME# disabled
[ 1.389392] pci 0000:02:01.3: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff]
[ 1.389482] pci 0000:02:01.3: supports D1 D2
[ 1.389485] pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.389497] pci 0000:02:01.3: PME# disabled
[ 1.389608] pci 0000:00:1e.0: transparent bridge
[ 1.389623] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff]
[ 1.389719] pci_bus 0000:00: on NUMA node 0
[ 1.389744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.405246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 1.409605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.411587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.413922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.735019] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 1.737462] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[ 1.739416] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
[ 1.741505] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 1.743492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.745462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.747589] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.749107] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.751263] SCSI subsystem initialized
[ 1.753520] libata version 3.00 loaded.
[ 1.754925] usbcore: registered new interface driver usbfs
[ 1.754925] usbcore: registered new interface driver hub
[ 1.754925] usbcore: registered new device driver usb
[ 1.756955] PCI: Using ACPI for IRQ routing
[ 1.767145] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.767159] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.776679] Switched to high resolution mode on CPU 0
[ 1.778426] Switched to high resolution mode on CPU 1
[ 1.790908] pnp: PnP ACPI init
[ 1.790997] ACPI: bus type pnp registered
[ 2.284697] pnp: PnP ACPI: found 13 devices
[ 2.284711] ACPI: ACPI bus type pnp unregistered
[ 2.284806] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 2.284835] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 2.284896] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 2.284955] system 00:09: ioport range 0xcb0-0xcbb has been reserved
[ 2.284976] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[ 2.285036] system 00:0a: ioport range 0x900-0x92f has been reserved
[ 2.285058] system 00:0a: ioport range 0x931-0x933 has been reserved
[ 2.285079] system 00:0a: ioport range 0x935-0x97f has been reserved
[ 2.285100] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 2.285121] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[ 2.285142] system 00:0a: ioport range 0x1008-0x100f has been reserved
[ 2.285201] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 2.285223] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[ 2.285251] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
[ 2.285273] system 00:0b: ioport range 0x1060-0x107f has been reserved
[ 2.285294] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 2.285315] system 00:0b: ioport range 0x1100-0x111f has been reserved
[ 2.285336] system 00:0b: ioport range 0x1010-0x102f has been reserved
[ 2.285357] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 2.285422] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 2.285451] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 2.285479] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 2.285507] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 2.285534] system 00:0c: iomem range 0x100000-0x3d38d3ff could not be reserved
[ 2.285563] system 00:0c: iomem range 0x3d38d400-0x3dafffff could not be reserved
[ 2.285585] system 00:0c: iomem range 0x3db00000-0x3dbfffff has been reserved
[ 2.285607] system 00:0c: iomem range 0xffe80000-0xffffffff has been reserved
[ 2.285628] system 00:0c: iomem range 0xffa00000-0xffb7ffff has been reserved
[ 2.285649] system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 2.285671] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 2.285694] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 2.285715] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 2.285736] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 2.285758] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 2.285779] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 2.285801] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 2.285822] system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 2.285843] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 2.285865] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 2.329905] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 2.329915] pci 0000:00:1c.0: IO window: disabled
[ 2.329927] pci 0000:00:1c.0: MEM window: disabled
[ 2.329938] pci 0000:00:1c.0: PREFETCH window: disabled
[ 2.329948] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 2.329954] pci 0000:00:1c.1: IO window: disabled
[ 2.329967] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 2.329977] pci 0000:00:1c.1: PREFETCH window: disabled
[ 2.329988] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 2.329994] pci 0000:00:1c.4: IO window: disabled
[ 2.330015] pci 0000:00:1c.4: MEM window: 0xf6800000-0xf68fffff
[ 2.330026] pci 0000:00:1c.4: PREFETCH window: disabled
[ 2.330092] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 2.330099] pci 0000:02:01.0: IO window: 0x002000-0x0020ff
[ 2.330110] pci 0000:02:01.0: IO window: 0x002400-0x0024ff
[ 2.330121] pci 0000:02:01.0: PREFETCH window: 0x40000000-0x43ffffff
[ 2.330132] pci 0000:02:01.0: MEM window: 0x44000000-0x47ffffff
[ 2.330143] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 2.330152] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 2.330165] pci 0000:00:1e.0: MEM window: 0xf6700000-0xf67fffff
[ 2.330176] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff
[ 2.330218] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.330230] pci 0000:00:1c.0: setting latency timer to 64
[ 2.330254] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.330266] pci 0000:00:1c.1: setting latency timer to 64
[ 2.330280] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.330291] pci 0000:00:1c.4: setting latency timer to 64
[ 2.330304] pci 0000:00:1e.0: setting latency timer to 64
[ 2.330329] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.330342] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.330345] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 2.330349] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 2.330352] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff]
[ 2.330355] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 2.330358] pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff]
[ 2.330361] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[ 2.330364] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 2.330367] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 2.330371] pci_bus 0000:03: resource 0 io: [0x2000-0x20ff]
[ 2.330373] pci_bus 0000:03: resource 1 io: [0x2400-0x24ff]
[ 2.330376] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
[ 2.330380] pci_bus 0000:03: resource 3 mem: [0x44000000-0x47ffffff]
[ 2.330522] NET: Registered protocol family 2
[ 2.330895] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.331987] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.332488] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 2.341325] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.341375] TCP reno registered
[ 2.341864] NET: Registered protocol family 1
[ 2.343113] Simple Boot Flag at 0x79 set to 0x1
[ 2.350195] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 2.350276] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 2.351070] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 2.352842] audit: initializing netlink socket (disabled)
[ 2.352914] type=2000 audit(1248095542.350:1): initialized
[ 2.361180] highmem bounce pool size: 64 pages
[ 2.361206] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.390758] Kmemleak testing
[ 2.390771] kmemleak: kmalloc(32) = f7127860
[ 2.390782] kmemleak: kmalloc(32) = f7127880
[ 2.390791] kmemleak: kmalloc(1024) = f72e3000
[ 2.390801] kmemleak: kmalloc(1024) = f72e3400
[ 2.390812] kmemleak: kmalloc(2048) = f7262000
[ 2.390822] kmemleak: kmalloc(2048) = f7262800
[ 2.390831] kmemleak: kmalloc(4096) = f702c000
[ 2.390841] kmemleak: kmalloc(4096) = f702d000
[ 2.390877] kmemleak: vmalloc(64) = f803b000
[ 2.390907] kmemleak: vmalloc(64) = f803e000
[ 2.390936] kmemleak: vmalloc(64) = f8041000
[ 2.390965] kmemleak: vmalloc(64) = f8044000
[ 2.390994] kmemleak: vmalloc(64) = f8047000
[ 2.391004] kmemleak: kmalloc(sizeof(*elem)) = f7281100
[ 2.391015] kmemleak: kmalloc(sizeof(*elem)) = f7281200
[ 2.391025] kmemleak: kmalloc(sizeof(*elem)) = f7281300
[ 2.391035] kmemleak: kmalloc(sizeof(*elem)) = f7281400
[ 2.391046] kmemleak: kmalloc(sizeof(*elem)) = f7281500
[ 2.391056] kmemleak: kmalloc(sizeof(*elem)) = f7281600
[ 2.391066] kmemleak: kmalloc(sizeof(*elem)) = f7281700
[ 2.391077] kmemleak: kmalloc(sizeof(*elem)) = f7281800
[ 2.391087] kmemleak: kmalloc(sizeof(*elem)) = f7281900
[ 2.391097] kmemleak: kmalloc(sizeof(*elem)) = f7281a00
[ 2.391108] kmemleak: kmalloc(129) = f71da600
[ 2.391118] kmemleak: kmalloc(129) = f71da780
[ 2.391708] VFS: Disk quotas dquot_6.5.2
[ 2.392326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.398939] msgmni has been set to 1735
[ 2.401422] alg: No test for stdrng (krng)
[ 2.402297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.402322] io scheduler noop registered
[ 2.402327] io scheduler anticipatory registered
[ 2.402334] io scheduler deadline registered
[ 2.402888] io scheduler cfq registered (default)
[ 2.402950] pci 0000:00:02.0: Boot video device
[ 2.405038] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 2.405056] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.406543] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 2.406560] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.408045] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 2.408062] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 2.410197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.411119] Platform driver 'platform-lcd' needs updating - please use dev_pm_ops
[ 2.413109] ALI M7101 PMU not found.
[ 2.414101] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 3072k, total 32704k
[ 2.414111] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[ 2.414118] vesafb: scrolling: redraw
[ 2.414123] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 2.429080] Console: switching to colour frame buffer device 128x48
[ 2.441544] fb0: VESA VGA frame buffer device
[ 2.443454] ACPI: AC Adapter [AC] (on-line)
[ 2.445539] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 2.458539] ACPI: Lid Switch [LID]
[ 2.460610] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.460823] ACPI: Power Button [PBTN]
[ 2.461742] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.461942] ACPI: Sleep Button [SBTN]
[ 2.488453] ACPI: SSDT 3d390957 002C3 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 2.495161] ACPI: SSDT 3d390df1 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 2.500253] Monitor-Mwait will be used to enter C-1 state
[ 2.500361] Monitor-Mwait will be used to enter C-2 state
[ 2.500453] Monitor-Mwait will be used to enter C-3 state
[ 2.500470] Marking TSC unstable due to TSC halts in idle
[ 2.501175] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.502060] processor LNXCPU:00: registered as cooling_device0
[ 2.502238] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.512946] ACPI: SSDT 3d390c1a 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 2.520216] ACPI: SSDT 3d3913b7 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 2.526559] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.527196] processor LNXCPU:01: registered as cooling_device1
[ 2.527373] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.674082] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.674369] ACPI: Thermal Zone [THM] (66 C)
[ 2.717712] Non-volatile memory driver v1.3
[ 2.718365] i8k: unable to get SMM BIOS version
[ 2.724182] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@xxxxxxxxxx)
[ 2.730126] Linux agpgart interface v0.103
[ 2.735925] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 2.742345] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 2.752319] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.768179] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 2.773832] Hangcheck: Using get_cycles().
[ 2.779872] [drm] Initialized drm 1.1.0 20060810
[ 2.785830] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.791507] pci 0000:00:02.0: setting latency timer to 64
[ 2.794586] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.800334] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.806164] pci 0000:00:02.0: irq 27 for MSI/MSI-X
[ 3.052691] acpi device:36: registered as cooling_device2
[ 3.102151] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input3
[ 3.108185] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.133141] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
[ 3.160339] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3b/input/input4
[ 3.166635] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 3.173248] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.179756] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.189238] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 3.218602] brd: module loaded
[ 3.243989] loop: module loaded
[ 3.251386] Loading iSCSI transport class v2.0-870.
[ 3.262102] ata_piix 0000:00:1f.2: version 2.13
[ 3.262133] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.268948] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 3.275370] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.278273] scsi0 : ata_piix
[ 3.286023] scsi1 : ata_piix
[ 3.334558] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19
[ 3.340802] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19
[ 3.346891] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.352803] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.373900] ACPI: Battery Slot [BAT0] (battery present)
[ 3.510077] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.510260] scsi2 : ata_piix
[ 3.517033] scsi3 : ata_piix
[ 3.525666] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19
[ 3.531355] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19
[ 3.538438] tg3.c:v3.99 (April 20, 2009)
[ 3.544050] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.549732] tg3 0000:09:00.0: setting latency timer to 64
[ 3.554357] tg3 0000:09:00.0: PME# disabled
[ 3.569539] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) MAC address 00:21:9b:f5:60:0f
[ 3.575301] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.581070] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.586830] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.593216] sky2 driver version 1.23
[ 3.601654] PPP generic driver version 2.4.2
[ 3.608270] PPP Deflate Compression module registered
[ 3.613979] PPP BSD Compression module registered
[ 3.620713] PPP MPPE Compression module registered
[ 3.626346] NET: Registered protocol family 24
[ 3.631989] PPPoL2TP kernel driver, V1.0
[ 3.637470] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 3.643232] CSLIP: code copyright 1989 Regents of the University of California.
[ 3.649004] SLIP linefill/keepalive option.
[ 3.655083] console [netcon0] enabled
[ 3.660660] netconsole: network logging started
[ 3.666517] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0262]
[ 3.813423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.823995] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133
[ 3.826744] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.835043] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.850353] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100
[ 3.855813] ata2.00: applying bridge limits
[ 3.861355] ata4: SATA link down (SStatus 4 SControl 300)
[ 3.875474] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.880613] ata1.00: configured for UDMA/133
[ 3.886642] scsi 0:0:0:0: Direct-Access ATA ST9160310AS DE04 PQ: 0 ANSI: 5
[ 3.895590] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.900773] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.907302] sd 0:0:0:0: [sda] Write Protect is off
[ 3.912290] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.912567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.914555] ata2.00: configured for UDMA/100
[ 3.924510] sda:
[ 3.929498] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633A D500 PQ: 0 ANSI: 5
[ 3.957586] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.962889] Uniform CD-ROM driver Revision: 3.20
[ 3.970038] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.971128] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.174400] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 4.296031] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.427743] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 4.433098] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 4.438433] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 4.443995] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 4.449619] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6700000 - 0xf67fffff
[ 4.455273] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 4.714291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.719943] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.725608] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.725614] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.731304] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.740777] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.746117] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.746242] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 4.764204] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.770040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.775396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.780768] usb usb1: Product: EHCI Host Controller
[ 4.786125] usb usb1: Manufacturer: Linux 2.6.31-rc3 ehci_hcd
[ 4.791510] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.798119] usb usb1: configuration #1 chosen from 1 choice
[ 4.804429] hub 1-0:1.0: USB hub found
[ 4.809809] hub 1-0:1.0: 6 ports detected
[ 4.816073] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.821290] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.821295] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.826486] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.835688] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.840790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.840922] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 4.857521] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.862923] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.867979] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.873020] usb usb2: Product: EHCI Host Controller
[ 4.878023] usb usb2: Manufacturer: Linux 2.6.31-rc3 ehci_hcd
[ 4.883009] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.888808] usb usb2: configuration #1 chosen from 1 choice
[ 4.894526] hub 2-0:1.0: USB hub found
[ 4.899606] hub 2-0:1.0: 6 ports detected
[ 4.905678] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.910735] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.913395] async/1 used greatest stack depth: 6484 bytes left
[ 4.921127] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.921132] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.926158] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.931176] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 4.936563] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.941517] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.946413] usb usb3: Product: UHCI Host Controller
[ 4.951257] usb usb3: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 4.956108] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.961754] usb usb3: configuration #1 chosen from 1 choice
[ 4.967244] hub 3-0:1.0: USB hub found
[ 4.972123] hub 3-0:1.0: 2 ports detected
[ 4.976852] async/0 used greatest stack depth: 6372 bytes left
[ 4.981567] async/2 used greatest stack depth: 6184 bytes left
[ 4.982348] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.982371] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.982376] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.982433] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.982597] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 4.983049] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.983052] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.983054] usb usb4: Product: UHCI Host Controller
[ 4.983056] usb usb4: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 4.983059] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.983934] usb usb4: configuration #1 chosen from 1 choice
[ 4.984660] hub 4-0:1.0: USB hub found
[ 4.984755] hub 4-0:1.0: 2 ports detected
[ 4.985445] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.985468] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.985473] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.985529] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.985609] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 4.986059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.986062] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.986065] usb usb5: Product: UHCI Host Controller
[ 4.986067] usb usb5: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 4.986069] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.986936] usb usb5: configuration #1 chosen from 1 choice
[ 4.987649] hub 5-0:1.0: USB hub found
[ 4.987743] hub 5-0:1.0: 2 ports detected
[ 4.988435] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.988457] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.988462] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.988516] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.988598] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 4.989053] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.989056] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.989059] usb usb6: Product: UHCI Host Controller
[ 4.989061] usb usb6: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 4.989063] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.990164] usb usb6: configuration #1 chosen from 1 choice
[ 4.990927] hub 6-0:1.0: USB hub found
[ 4.991018] hub 6-0:1.0: 2 ports detected
[ 4.991702] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.991725] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.991729] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.991785] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.991866] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 4.992315] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.992318] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.992320] usb usb7: Product: UHCI Host Controller
[ 4.992322] usb usb7: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 4.992325] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.993200] usb usb7: configuration #1 chosen from 1 choice
[ 4.993900] hub 7-0:1.0: USB hub found
[ 4.993994] hub 7-0:1.0: 2 ports detected
[ 4.994697] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.994721] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.994725] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.994780] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.994861] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 4.995307] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.995310] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.995312] usb usb8: Product: UHCI Host Controller
[ 4.995314] usb usb8: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 4.995316] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.996194] usb usb8: configuration #1 chosen from 1 choice
[ 4.996895] hub 8-0:1.0: USB hub found
[ 4.996987] hub 8-0:1.0: 2 ports detected
[ 4.998034] Initializing USB Mass Storage driver...
[ 4.998470] usbcore: registered new interface driver usb-storage
[ 4.998481] USB Mass Storage support registered.
[ 4.999204] usbcore: registered new interface driver libusual
[ 4.999970] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.000009] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 5.000756] drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
[ 5.000841] drivers/input/serio/i8042.c: 65 <- i8042 (return) [0]
[ 5.000998] i8042.c: Warning: Keylock active.
[ 5.001003] drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
[ 5.001062] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [1]
[ 5.001176] drivers/input/serio/i8042.c: d3 -> i8042 (command) [1]
[ 5.001287] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [1]
[ 5.001611] drivers/input/serio/i8042.c: 5a <- i8042 (return) [1]
[ 5.001616] drivers/input/serio/i8042.c: a7 -> i8042 (command) [1]
[ 5.001673] drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
[ 5.002046] drivers/input/serio/i8042.c: 74 <- i8042 (return) [1]
[ 5.002051] drivers/input/serio/i8042.c: a8 -> i8042 (command) [1]
[ 5.002108] drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
[ 5.002430] drivers/input/serio/i8042.c: 54 <- i8042 (return) [1]
[ 5.002481] drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
[ 5.002540] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [1]
[ 5.002652] drivers/input/serio/i8042.c: d3 -> i8042 (command) [1]
[ 5.002815] drivers/input/serio/i8042.c: a5 -> i8042 (parameter) [1]
[ 5.250908] drivers/input/serio/i8042.c: a5 <- i8042 (flush, aux) [76]
[ 5.250916] drivers/input/serio/i8042.c: 60 -> i8042 (command) [76]
[ 5.250975] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [76]
[ 5.251131] drivers/input/serio/i8042.c: 60 -> i8042 (command) [76]
[ 5.251295] drivers/input/serio/i8042.c: 65 -> i8042 (parameter) [76]
[ 5.251300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.251828] mice: PS/2 mouse device common for all mice
[ 5.258377] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [78]
[ 5.258629] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [78]
[ 5.271446] rtc_cmos 00:03: RTC can wake from S4
[ 5.272266] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.272344] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 5.272648] i2c /dev entries driver
[ 5.273398] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.322617] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [97]
[ 5.322746] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [97]
[ 5.322832] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [97]
[ 5.323076] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [97]
[ 5.323095] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [97]
[ 5.323434] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [97]
[ 5.323451] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [97]
[ 5.323716] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [97]
[ 5.323733] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [97]
[ 5.324008] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [97]
[ 5.324047] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [97]
[ 5.324303] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [98]
[ 5.324647] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
[ 5.329826] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 5.330441] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 5.331487] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
[ 5.332016] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.332022] iTCO_vendor_support: vendor-support=0
[ 5.333804] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 5.334894] device-mapper: dm-log-userspace: version 1.0.0 loaded
[ 5.337967] cpuidle: using governor ladder
[ 5.377203] cpuidle: using governor menu
[ 5.383629] sdhci: Secure Digital Host Controller Interface driver
[ 5.388737] sdhci: Copyright(c) Pierre Ossman
[ 5.394429] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 5.399633] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.407836] Registered led device: mmc0::
[ 5.414691] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
[ 5.420189] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 5.425372] wbsd: Copyright(c) Pierre Ossman
[ 5.432716] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.447890] usbcore: registered new interface driver hiddev
[ 5.453693] usbcore: registered new interface driver usbhid
[ 5.459018] usbhid: v2.6:USB HID core driver
[ 5.465378] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 5.470786] ALSA device list:
[ 5.476058] No soundcards found.
[ 5.481302] Netfilter messages via NETLINK v0.30.
[ 5.486640] nf_conntrack version 0.5.0 (15672 buckets, 62688 max)
[ 5.493681] ctnetlink v0.93: registering with nfnetlink.
[ 5.501226] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.506715] TCP cubic registered
[ 5.511970] NET: Registered protocol family 17
[ 5.517291] lib80211: common routines for IEEE802.11 drivers
[ 5.522625] lib80211_crypt: registered algorithm 'NULL'
[ 5.536326] Using IPI No-Shortcut mode
[ 5.543200] PM: Checking image partition /dev/sda8
[ 5.543248] PM: Resume from partition 8:8
[ 5.543250] PM: Checking hibernation image.
[ 5.544002] PM: Resume from disk failed.
[ 5.544160] registered taskstats version 1
[ 5.549715] kmemleak: Kernel memory leak detector initialized
[ 5.549734] kmemleak: Automatic memory scanning thread started
[ 5.561726] Magic number: 1:56:231
[ 5.567085] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 5.573474] md: Waiting for all devices to be available before autodetect
[ 5.578806] md: If you don't use raid, use raid=noautodetect
[ 5.586768] md: Autodetecting RAID arrays.
[ 5.592049] md: Scanned 0 and added 0 devices.
[ 5.597384] md: autorun ...
[ 5.602568] md: ... autorun DONE.
[ 6.000175] Clocksource tsc unstable (delta = -369139176 ns)
[ 6.163739] kjournald starting. Commit interval 5 seconds
[ 6.164566] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.164804] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[ 6.164948] Freeing unused kernel memory: 364k freed
[ 6.206618] Write protecting the kernel text: 3320k
[ 6.217382] Write protecting the kernel read-only data: 1804k
[ 7.389871] mount used greatest stack depth: 5824 bytes left
[ 8.798837] ACPI: WMI: Mapper loaded
[ 9.090486] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.152253] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 9.482043] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.487398] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.443602] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c]
[ 10.923588] Adding 2008084k swap on /dev/sda8. Priority:-1 extents:1 across:2008084k
[ 12.888801] EXT3 FS on sda2, internal journal
[ 17.921669] kjournald starting. Commit interval 5 seconds
[ 17.932861] EXT3 FS on sda3, internal journal
[ 17.943927] EXT3-fs: mounted filesystem with writeback data mode.
[ 18.172713] EXT4-fs (sda5): Filesystem with huge files cannot be mounted read-write without CONFIG_LBDAF
[ 18.887657] rc.S used greatest stack depth: 5632 bytes left
[ 22.203257] EXT4-fs (sda5): Filesystem with huge files cannot be mounted read-write without CONFIG_LBDAF
[ 28.388638] Bluetooth: Core ver 2.15
[ 28.398963] NET: Registered protocol family 31
[ 28.398966] Bluetooth: HCI device and connection manager initialized
[ 28.399050] Bluetooth: HCI socket layer initialized
[ 28.630593] Bluetooth: L2CAP ver 2.13
[ 28.630596] Bluetooth: L2CAP socket layer initialized
[ 29.129104] Bluetooth: SCO (Voice Link) ver 0.6
[ 29.129107] Bluetooth: SCO socket layer initialized
[ 29.214037] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.214047] Bluetooth: BNEP filters: protocol multicast
[ 30.308459] update-mime-dat used greatest stack depth: 5596 bytes left
[ 33.661414] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [8599]
[ 33.789868] drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [8637]
[ 33.789995] drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [8637]
[ 34.020628] drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [8707]
[ 34.020755] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 0, 1) [8707]
[ 34.150717] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, 0, 1) [8746]
[ 34.484818] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [8846]
[ 34.581876] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [8875]
[ 34.981511] drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [8995]
[ 35.053109] drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [9016]
[ 35.150116] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 0, 1) [9046]
[ 35.253640] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, 0, 1) [9077]
[ 35.259713] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [9078]
[ 35.333874] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [9101]
[ 36.450513] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [9436]
[ 36.567044] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [9471]
[ 36.642408] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [9493]
[ 36.757566] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [9528]
[ 36.853179] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [9556]
[ 36.988196] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [9597]
[ 37.105273] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [9632]
[ 37.238873] drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, 0, 1) [9672]
[ 37.258874] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [9678]
[ 37.309019] drivers/input/serio/i8042.c: 95 <- i8042 (interrupt, 0, 1) [9693]
[ 37.416305] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [9725]
[ 37.519618] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [9756]
[ 37.539620] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [9762]
[ 37.639949] drivers/input/serio/i8042.c: 2f <- i8042 (interrupt, 0, 1) [9792]
[ 37.669980] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [9801]
[ 37.710140] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [9814]
[ 37.820392] drivers/input/serio/i8042.c: af <- i8042 (interrupt, 0, 1) [9847]
[ 37.850488] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [9856]
[ 38.086403] drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, 0, 1) [9926]
[ 38.151281] drivers/input/serio/i8042.c: 82 <- i8042 (interrupt, 0, 1) [9946]
[ 38.165788] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [9950]
[ 38.231603] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [9970]
[ 40.164573] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [10550]
[ 40.246838] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [10575]
[ 40.418751] drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [10626]
[ 40.527664] drivers/input/serio/i8042.c: 23 <- i8042 (interrupt, 0, 1) [10659]
[ 40.587865] drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [10677]
[ 40.647965] drivers/input/serio/i8042.c: a3 <- i8042 (interrupt, 0, 1) [10695]
[ 40.733997] drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [10721]
[ 40.788398] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [10737]
[ 40.908691] drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [10773]
[ 40.938889] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [10782]
[ 41.260142] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [10879]
[ 41.329889] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, 0, 1) [10899]
[ 41.400068] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, 0, 1) [10921]
[ 41.460256] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [10939]
[ 41.531642] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [10960]
[ 41.630764] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [10990]
[ 41.730180] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [11020]
[ 41.831392] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [11050]
[ 41.891520] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [11068]
[ 41.921609] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [11077]
[ 42.099553] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, 0, 1) [11130]
[ 42.172344] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, 0, 1) [11152]
[ 42.396378] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [11219]
[ 42.483281] drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, 0, 1) [11245]
[ 42.523353] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [11257]
[ 42.583542] drivers/input/serio/i8042.c: 95 <- i8042 (interrupt, 0, 1) [11276]
[ 42.651095] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [11296]
[ 42.824459] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [11348]
[ 42.824621] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, 0, 1) [11348]
[ 42.894486] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, 0, 1) [11369]
[ 43.583779] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [11576]
[ 43.689647] drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [11607]
[ 43.778594] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [11634]
[ 43.818355] drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [11646]
[ 43.818479] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [11646]
[ 43.996188] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [11699]
[ 44.778216] drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [11934]
[ 44.856465] drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [11957]
[ 45.018022] drivers/input/serio/i8042.c: 09 <- i8042 (interrupt, 0, 1) [12006]
[ 45.123487] drivers/input/serio/i8042.c: 89 <- i8042 (interrupt, 0, 1) [12038]
[ 45.197539] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [12060]
[ 45.340953] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [12103]
[ 46.265169] drivers/input/serio/i8042.c: 0b <- i8042 (interrupt, 0, 1) [12380]
[ 46.349623] drivers/input/serio/i8042.c: 8b <- i8042 (interrupt, 0, 1) [12405]
[ 46.401028] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [12421]
[ 46.567184] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [12471]
[ 47.287279] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [12687]
[ 47.377953] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [12714]
[ 47.388745] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [12717]
[ 47.506522] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [12752]
[ 47.631593] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [12790]
[ 47.813081] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [12844]
[ 48.641110] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [13093]
[ 48.762366] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [13129]
[ 48.857266] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [13158]
[ 49.009589] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [13203]
[ 49.724819] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [13418]
[ 49.810572] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [13444]
[ 49.885832] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [13466]
[ 49.968892] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [13491]
[ 50.083303] drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [13525]
[ 50.265679] drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [13580]
[ 50.612746] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [13684]
[ 71.407654] kmemleak: 11 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
>
> --
> Jiri Kosina
> SUSE Labs
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/