[PATCH v2] I2C: Add support for new AMD SMBus devices

From: Crane Cai
Date: Tue Aug 11 2009 - 07:55:17 EST


AMD newer SMBus device uses the piix4 driver, and device is added by vendor ID
and class code. This method will include AMD old SMBus controller in, and need
to filter it out.

Signed-off-by: Crane Cai <crane.cai@xxxxxxx>
---
drivers/i2c/busses/i2c-piix4.c | 17 +++++++++++++++--
1 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 0249a7d..2539282 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -232,6 +232,14 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
unsigned short smba_idx = 0xcd6;
u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;

+ /* Filter AMD old SMBus controller out */
+ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+ (PIIX4_dev->device <= PCI_DEVICE_ID_AMD_8111_SMBUS &&
+ PIIX4_dev->device >= PCI_DEVICE_ID_AMD_VIPER_740B)) {
+ dev_info(&PIIX4_dev->dev, "Does not support this chip.\n");
+ return -ENODEV;
+ }
+
/* SB800 SMBus does not support forcing address */
if (force || force_addr) {
dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support "
@@ -479,6 +487,10 @@ static struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+ /* AMD Generic, PCI class code and Vendor ID for SMBus */
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID),
+ .class = PCI_CLASS_SERIAL_SMBUS << 8,
+ .class_mask = 0xffffff },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_OSB4) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
@@ -499,9 +511,10 @@ static int __devinit piix4_probe(struct pci_dev *dev,
{
int retval;

- if ((dev->vendor == PCI_VENDOR_ID_ATI) &&
+ if (((dev->vendor == PCI_VENDOR_ID_ATI) &&
(dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) &&
- (dev->revision >= 0x40))
+ (dev->revision >= 0x40)) ||
+ dev->vendor == PCI_VENDOR_ID_AMD)
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id);
else
--
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/