Re: [PATCH 2/2] x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag

[Kevin Winchester]

2009/8/13 Brian Gerst <brgerst@xxxxxxxxx>:
> On Thu, Aug 13, 2009 at 8:31 AM, Borislav Petkov<borislav.petkov@xxxxxxx> wrote:
>> From: Kevin Winchester <kjwinchester@xxxxxxxxx>
>>
>> Due to an erratum with certain AMD Athlon 64 processors, the BIOS may
>> need to force enable the LAHF_LM capability.  Unfortunately, in at
>> least one case, the BIOS does this even for processors that do not
>> support the functionality.
>>
>> Add a specific check that will clear the feature bit for processors
>> known not to support the LAHF/SAHF instructions.
>>
>> Borislav: turn off cpuid bit.
>>
>> Signed-off-by: Kevin Winchester <kjwinchester@xxxxxxxxx>
>> Signed-off-by: Borislav Petkov <borislav.petkov@xxxxxxx>
>> ---
>>  arch/x86/kernel/cpu/amd.c |   16 ++++++++++++++++
>>  1 files changed, 16 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
>> index e2485b0..9cd6fc7 100644
>> --- a/arch/x86/kernel/cpu/amd.c
>> +++ b/arch/x86/kernel/cpu/amd.c
>> @@ -400,6 +400,22 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
>>                level = cpuid_eax(1);
>>                if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
>>                        set_cpu_cap(c, X86_FEATURE_REP_GOOD);
>> +
>> +               /*
>> +                * Some BIOSes incorrectly force this feature, but only K8
>> +                * revision D (model = 0x14) and later actually support it.
>> +                */
>> +               if (c->x86_model < 0x14) {
>
> Shouldn't you test that the flag is actually set before trying to clear it?
>

Possibly.  If there were some concern that:

- The extra instructions would cause a performance impact, and the
test was significantly faster than the clear.
- The extra instructions might actually cause more problems if the
flag is not set.

Then we would certainly want to test it first.  In my opinion, a few
simple instructions to clear the flag and the CPUID bit will not
affect performance, and clearing a flag that is already cleared should
not cause any additional problems, so I would not bother testing the
flag first.  That results in fewer lines of code to change.

-- 
Kevin Winchester
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/