Re: PCI resources allocation problem on Toshiba Satellite A40
From: Frans Pop
Date: Fri Aug 14 2009 - 12:50:57 EST
On Friday 14 August 2009, Linus Torvalds wrote:
> Can you send
> - output of /proc/ioports both with the current kernel (or the 2.6.30
> kernel - they should be identical) and with one of the kernels in
> between that didn't warn
> - send the full bootup dmesg with CONFIG_PCI_DEBUG enabled
>
> and we can probably figure it out.
Attached.
> That said, since it's not a regression, I'm not going to _do_ anything
> about it until after 2.6.31, but I might have a test-patch for you to
> try ot something.
No problem and that'd be great.
Thanks,
FJP
--- ioports.a76117d 2009-08-14 18:44:42.000000000 +0200
+++ ioports.current-git 2009-08-14 18:44:42.000000000 +0200
@@ -1,68 +1,68 @@
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
0170-0177 : piix
01e0-01ef : pnp 00:08
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : piix
0376-0376 : 0000:00:1f.1
0376-0376 : piix
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : piix
0480-048f : pnp 00:08
04d0-04d1 : pnp 00:08
0680-06ff : pnp 00:08
0778-077a : parport0
0800-080f : pnp 00:08
0cf8-0cff : PCI conf1
1000-10ff : 0000:00:1f.5
1400-14ff : 0000:00:1f.6
1800-187f : 0000:00:1f.6
1880-18bf : 0000:00:1f.5
+18c0-18df : 0000:00:1d.0
+ 18c0-18df : uhci_hcd
+18e0-18ff : 0000:00:1d.1
+ 18e0-18ff : uhci_hcd
bfa0-bfaf : 0000:00:1f.1
bfa0-bfaf : piix
c000-cfff : PCI Bus 0000:01
c000-c0ff : PCI CardBus 0000:02
c400-c4ff : PCI CardBus 0000:02
cf40-cf7f : 0000:01:08.0
cf40-cf7f : e100
- cf80-cf9f : 0000:00:1d.1
- cf80-cf9f : uhci_hcd
- cfe0-cfff : 0000:00:1d.0
- cfe0-cfff : uhci_hcd
d800-d87f : 0000:00:1f.0
d800-d87f : pnp 00:08
d800-d803 : ACPI PM1a_EVT_BLK
d804-d805 : ACPI PM1a_CNT_BLK
d808-d80b : ACPI PM_TMR
d810-d815 : ACPI CPU throttle
d820-d820 : ACPI PM2_CNT_BLK
d828-d82f : ACPI GPE0_BLK
d830-d833 : iTCO_wdt
d860-d87f : iTCO_wdt
d880-d89f : pnp 00:08
d8a0-d8bf : pnp 00:08
e000-e07f : pnp 00:08
e080-e0ff : pnp 00:08
e400-e47f : pnp 00:08
e480-e4ff : pnp 00:08
e800-e87f : pnp 00:08
e880-e8ff : pnp 00:08
ec00-ec7f : pnp 00:08
ec80-ecff : pnp 00:08
eeac-eeac : pnp 00:08
eeb0-eebf : pnp 00:08
eec0-eeff : 0000:00:1f.0
eec0-eeff : pnp 00:08
eff8-efff : 0000:00:02.0
Linux version 2.6.31-rc5 (root@aragorn) (gcc version 4.3.4 (Debian 4.3.4-1) ) #16 SMP Fri Aug 14 18:30:07 CEST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x1ef40 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FEDA0000 mask FFFFE0000 write-back
1 base 01F000000 mask FFF000000 uncachable
2 base 0FFF00000 mask FFFF00000 uncachable
3 base 000000000 mask FE0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
e820 update range: 000000001f000000 - 00000000feda0000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ef40000
0000000000 - 0000400000 page 4k
0000400000 - 001ec00000 page 2M
001ec00000 - 001ef40000 page 4k
kernel direct mapping tables up to 1ef40000 @ 7000-c000
RAMDISK: 1eb62000 - 1ef2f9c4
ACPI: RSDP 000f0180 00014 (v00 TOSHIB)
ACPI: RSDT 1ef40000 00038 (v01 TOSHIB 750 00970814 TASM 04010000)
ACPI: FACP 1ef40060 00084 (v02 TOSHIB 750 20030101 TASM 04010000)
ACPI: DSDT 1ef40558 04B72 (v01 TOSHIB A000C 20031216 MSFT 0100000E)
ACPI: FACS 000eee00 00040
ACPI: SSDT 1ef402ca 00082 (v01 TOSHIB A000C 20030917 MSFT 0100000E)
ACPI: DBGP 1ef400e4 00034 (v01 TOSHIB 750 00970814 TASM 04010000)
ACPI: BOOT 1ef40038 00028 (v01 TOSHIB 750 00970814 TASM 04010000)
ACPI: APIC 1ef40118 00062 (v01 TOSHIB 750 00970814 TASM 04010000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
495MB LOWMEM available.
mapped low ram: 0 - 1ef40000
low ram: 0 - 1ef40000
node 0 low ram: 00000000 - 1ef40000
node 0 bootmap 00002000 - 00005de8
(9 early reservations) ==> bootmem [0000000000 - 001ef40000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000141fc94] TEXT DATA BSS ==> [0001000000 - 000141fc94]
#4 [001eb62000 - 001ef2f9c4] RAMDISK ==> [001eb62000 - 001ef2f9c4]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0001420000 - 00014261b0] BRK ==> [0001420000 - 00014261b0]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ef40
HighMem 0x0001ef40 -> 0x0001ef40
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001ef40
On node 0 totalpages: 126687
free_area_init_node: node 0, pgdat c134abc0, node_mem_map c1427000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 959 pages used for memmap
Normal zone: 121729 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xd808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfc00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c1809000, static data 21468 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125696
Kernel command line: root=/dev/mapper/strider-root ro vga=791 quiet
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 493912k/507136k available (2288k kernel code, 12640k reserved, 1180k data, 312k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdf740000 - 0xff7fe000 ( 512 MB)
lowmem : 0xc0000000 - 0xdef40000 ( 495 MB)
.init : 0xc136b000 - 0xc13b9000 ( 312 kB)
.data : 0xc123c20a - 0xc1363338 (1180 kB)
.text : 0xc1000000 - 0xc123c20a (2288 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:512
Fast TSC calibration using PIT
Detected 2793.024 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.04 BogoMIPS (lpj=11172096)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (5586.04 BogoMIPS).
CPU0 attaching NULL sched-domain.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd2fe, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Package List length (F) larger than NumElements count (2), truncated
20090521 dsobject-502
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: Power Resource [PFAN] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Scanning bus 0000:00
pci 0000:00:00.0: found [8086:3580] class 000600 header type 00
pci 0000:00:00.0: calling asus_hides_smbus_hostbridge+0x0/0x20f
pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:00.1: found [8086:3584] class 000880 header type 00
pci 0000:00:00.1: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:00.1: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:00.3: found [8086:3585] class 000880 header type 00
pci 0000:00:00.3: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:00.3: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:02.0: found [8086:3582] class 000300 header type 00
pci 0000:00:02.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
pci 0000:00:02.0: reg 18 io port: [0xeff8-0xefff]
pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: found [8086:3582] class 000380 header type 00
pci 0000:00:02.1: reg 10 32bit mmio: [0x20000000-0x27ffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0x2c000000-0x2c07ffff]
pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: found [8086:24c2] class 000c03 header type 00
pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff]
pci 0000:00:1d.0: calling asus_hides_smbus_hostbridge+0x0/0x20f
pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1d.1: found [8086:24c4] class 000c03 header type 00
pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f]
pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1d.7: found [8086:24cd] class 000c03 header type 00
pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: found [8086:2448] class 000604 header type 01
pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1f.0: found [8086:24cc] class 000601 header type 00
pci 0000:00:1f.0: calling old_ich_force_enable_hpet_user+0x0/0x33
pci 0000:00:1f.0: calling asus_hides_smbus_lpc+0x0/0xc1
pci 0000:00:1f.0: calling quirk_ich4_lpc_acpi+0x0/0x81
pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH4 GPIO
pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1f.1: found [8086:24ca] class 000101 header type 00
pci 0000:00:1f.1: reg 10 io port: [0xbff8-0xbfff]
pci 0000:00:1f.1: reg 14 io port: [0xbff4-0xbff7]
pci 0000:00:1f.1: reg 18 io port: [0xbfe8-0xbfef]
pci 0000:00:1f.1: reg 1c io port: [0xbfe4-0xbfe7]
pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x2c080400-0x2c0807ff]
pci 0000:00:1f.1: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1f.5: found [8086:24c5] class 000401 header type 00
pci 0000:00:1f.5: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.5: reg 14 io port: [0x00-0x3f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: found [8086:24c6] class 000703 header type 00
pci 0000:00:1f.6: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.6: reg 14 io port: [0x00-0x7f]
pci 0000:00:1f.6: calling quirk_resource_alignment+0x0/0x182
pci 0000:00:1f.6: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
PCI: Fixups for bus 0000:00
pci 0000:00:1e.0: scanning behind bridge, config 030100, pass 0
PCI: Scanning bus 0000:01
pci 0000:01:08.0: found [8086:103d] class 000200 header type 00
pci 0000:01:08.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
pci 0000:01:08.0: reg 14 io port: [0xcf40-0xcf7f]
pci 0000:01:08.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:01:08.0: calling pci_fixup_transparent_bridge+0x0/0x4a
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:01:0b.0: found [1179:0617] class 000607 header type 02
pci 0000:01:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:01:0b.0: calling quirk_resource_alignment+0x0/0x182
PCI: Fixups for bus 0000:01
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
pci 0000:01:0b.0: scanning behind bridge, config 030301, pass 0
pci 0000:01:0b.0: scanning behind bridge, config 030301, pass 1
PCI: Bus scan for 0000:01 returning with max=02
pci 0000:00:1e.0: scanning behind bridge, config 030100, pass 1
PCI: Bus scan for 0000:00 returning with max=03
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
PCI: Using ACPI for IRQ routing
pci 0000:00:1d.0: BAR 4: address space collision on of device [0xcfe0-0xcfff]
pci 0000:00:1d.0: BAR 4: can't allocate resource
pci 0000:00:1d.1: BAR 4: address space collision on of device [0xcf80-0xcf9f]
pci 0000:00:1d.1: BAR 4: can't allocate resource
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.0 BAR 4 (0x0-0x1f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.1 BAR 4 (0x0-0x1f), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
(The fact that a range could not be reserved is generally harmless.)
system 00:00: iomem range 0xe0000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved
system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved
system 00:00: iomem range 0x1ef50000-0x1effffff has been reserved
system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:00: iomem range 0xffe80000-0xffffffff has been reserved
system 00:08: ioport range 0x1e0-0x1ef has been reserved
system 00:08: ioport range 0x480-0x48f has been reserved
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0xd800-0xd87f has been reserved
system 00:08: ioport range 0xd880-0xd89f has been reserved
system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
system 00:08: ioport range 0xe000-0xe07f has been reserved
system 00:08: ioport range 0xe080-0xe0ff has been reserved
system 00:08: ioport range 0xe400-0xe47f has been reserved
system 00:08: ioport range 0xe480-0xe4ff has been reserved
system 00:08: ioport range 0xe800-0xe87f has been reserved
system 00:08: ioport range 0xe880-0xe8ff has been reserved
system 00:08: ioport range 0xec00-0xec7f has been reserved
system 00:08: ioport range 0xec80-0xecff has been reserved
system 00:08: ioport range 0xeeac-0xeeac has been reserved
system 00:08: ioport range 0xeeb0-0xeebf has been reserved
system 00:08: ioport range 0xeec0-0xeeff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:00:1d.7: BAR 0: got res [0x2c080000-0x2c0803ff] bus [0x2c080000-0x2c0803ff] flags 0x20200
pci 0000:00:1d.7: BAR 0: moved to bus [0x2c080000-0x2c0803ff] flags 0x20200
pci 0000:00:1f.5: BAR 2: got res [0x2c080800-0x2c0809ff] bus [0x2c080800-0x2c0809ff] flags 0x20200
pci 0000:00:1f.5: BAR 2: moved to bus [0x2c080800-0x2c0809ff] flags 0x20200
pci 0000:00:1f.5: BAR 0: got res [0x1000-0x10ff] bus [0x1000-0x10ff] flags 0x20101
pci 0000:00:1f.5: BAR 0: moved to bus [0x1000-0x10ff] flags 0x20101
pci 0000:00:1f.5: BAR 3: got res [0x2c080a00-0x2c080aff] bus [0x2c080a00-0x2c080aff] flags 0x20200
pci 0000:00:1f.5: BAR 3: moved to bus [0x2c080a00-0x2c080aff] flags 0x20200
pci 0000:00:1f.6: BAR 0: got res [0x1400-0x14ff] bus [0x1400-0x14ff] flags 0x20101
pci 0000:00:1f.6: BAR 0: moved to bus [0x1400-0x14ff] flags 0x20101
pci 0000:00:1f.6: BAR 1: got res [0x1800-0x187f] bus [0x1800-0x187f] flags 0x20101
pci 0000:00:1f.6: BAR 1: moved to bus [0x1800-0x187f] flags 0x20101
pci 0000:00:1f.5: BAR 1: got res [0x1880-0x18bf] bus [0x1880-0x18bf] flags 0x20101
pci 0000:00:1f.5: BAR 1: moved to bus [0x1880-0x18bf] flags 0x20101
pci 0000:00:1d.0: BAR 4: got res [0x18c0-0x18df] bus [0x18c0-0x18df] flags 0x20101
pci 0000:00:1d.0: BAR 4: moved to bus [0x18c0-0x18df] flags 0x20101
pci 0000:00:1d.1: BAR 4: got res [0x18e0-0x18ff] bus [0x18e0-0x18ff] flags 0x20101
pci 0000:00:1d.1: BAR 4: moved to bus [0x18e0-0x18ff] flags 0x20101
pci 0000:01:0b.0: BAR 0: got res [0xcff00000-0xcff00fff] bus [0xcff00000-0xcff00fff] flags 0x20200
pci 0000:01:0b.0: BAR 0: moved to bus [0xcff00000-0xcff00fff] flags 0x20200
pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:0b.0: IO window: 0x00c000-0x00c0ff
pci 0000:01:0b.0: IO window: 0x00c400-0x00c4ff
pci 0000:01:0b.0: PREFETCH window: 0x28000000-0x2bffffff
pci 0000:01:0b.0: MEM window: 0x30000000-0x33ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0xc000-0xcfff
pci 0000:00:1e.0: MEM window: 0xcff00000-0xcfffffff
pci 0000:00:1e.0: PREFETCH window: 0x28000000-0x2bffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:0b.0: enabling device (0000 -> 0003)
pci 0000:01:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:0b.0: enabling bus mastering
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
pci_bus 0000:01: resource 2 pref mem [0x28000000-0x2bffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xc000-0xc0ff]
pci_bus 0000:02: resource 1 io: [0xc400-0xc4ff]
pci_bus 0000:02: resource 2 pref mem [0x28000000-0x2bffffff]
pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3894k freed
Simple Boot Flag at 0x7c set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1250267810.288:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 972
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:00.0: calling pci_fixup_video+0x0/0xae
pci 0000:00:00.1: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:00.1: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:00.1: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:00.1: calling pci_fixup_video+0x0/0xae
pci 0000:00:00.3: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:00.3: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:00.3: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:00.3: calling pci_fixup_video+0x0/0xae
pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:02.0: calling pci_fixup_video+0x0/0xae
pci 0000:00:02.0: Boot video device
pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:02.1: calling pci_fixup_video+0x0/0xae
pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xae
pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xae
pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xae
pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xae
pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xae
pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xae
pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xae
pci 0000:00:1f.6: calling quirk_e100_interrupt+0x0/0x174
pci 0000:00:1f.6: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:00:1f.6: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:00:1f.6: calling pci_fixup_video+0x0/0xae
pci 0000:01:08.0: calling quirk_e100_interrupt+0x0/0x174
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:08.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:01:08.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:01:08.0: calling pci_fixup_video+0x0/0xae
pci 0000:01:0b.0: calling quirk_cardbus_legacy+0x0/0x41
pci 0000:01:0b.0: calling quirk_usb_early_handoff+0x0/0x571
pci 0000:01:0b.0: calling pci_fixup_video+0x0/0xae
vesafb: framebuffer at 0xd8000000, mapped to 0xdf780000, using 3072k, total 16192k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Platform driver 'serial8250' needs updating - please use dev_pm_ops
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:1f.6: PCI INT B disabled
brd: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xcffff000, irq 20, MAC addr 00:08:0d:17:bf:f5
console [netcon0] enabled
netconsole: network logging started
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Platform driver 'i8042' needs updating - please use dev_pm_ops
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 312k freed
input: AT Translated Set 2 keyboard as /class/input/input0
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Uniform Multi-Platform E-IDE driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: enabling bus mastering
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x2c080000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7
ide1: BM-DMA at 0xbfa8-0xbfaf
Probing IDE interface ide0...
hda: HTS541080G9AT00, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ide-gd driver 1.18
hda: max request size: 512KiB
ide-cd driver 5.00
hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 16252K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
input: Power Button as /class/input/input1
ACPI: Power Button [PWRF]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input3
ACPI: Power Button [PWRB]
ACPI Warning: \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer 20090521 nspredef-946
ACPI: Battery Slot [BAT1] (battery present)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor LNXCPU:00: registered as cooling_device1
ACPI: AC Adapter [ADP1] (on-line)
parport_pc 00:09: activated
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
acpi device:0f: registered as cooling_device2
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
input: PC Speaker as /class/input/input5
input: Toshiba input device as /class/input/input6
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x0c38, PCI irq 18
yenta_cardbus 0000:01:0b.0: Socket status: 30000020
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean.
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff
input: PS/2 Mouse as /class/input/input7
input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:02:00.0: found [168c:0013] class 000200 header type 00
pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x182
pci 0000:02:00.0: BAR 0: got res [0x30000000-0x3000ffff] bus [0x30000000-0x3000ffff] flags 0x20200
pci 0000:02:00.0: BAR 0: moved to bus [0x30000000-0x3000ffff] flags 0x20200
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: EU
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: EU
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
ath5k 0000:02:00.0: enabling device (0000 -> 0002)
ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:02:00.0: enabling bus mastering
ath5k 0000:02:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x30
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AM
ath: Regpair used: 0x30
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
ath5k phy0: RF2112B 2GHz radio found (0x46)
cfg80211: Calling CRDA for country: AM
udev: renamed network interface wlan0 to ath0
EXT3 FS on dm-1, internal journal
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/strider-swap_crypt. Priority:-1 extents:1 across:1048568k
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ath0: authenticate with AP 00:14:c1:38:e5:15
ath0: authenticated
ath0: associate with AP 00:14:c1:38:e5:15
ath0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=2)
ath0: associated
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -138927951 ns)