Re: 2.6.31-rc5 regression: hd don't show up

From: Tim Blechmann
Date: Sun Aug 16 2009 - 06:07:19 EST

Next message: Ingo Molnar: "Re: [PATCH] kmemleak: Ignore the aperture memory hole on x86_64"
Previous message: Daniel J Blueman: "[2.6.31-rc6] ACPI region conflict regression..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

>>>> running 2.6.31-rc5 (7cb7beb31aa3d941833b6a6e553687422c31e4b6 to be
>>>> exact), sometimes some hard disks don't show up.
>>>>
>>>> after booting, my root hd (sda) is mounted to /, while two other hds
>>>> (sdb/sdc) are mounted as a user. sda is always present, but the other
>>>> two sometimes don't show up (i.e. they are not listed in /dev/disk/, nor
>>>> to they have a /dev/sdX link). with 2.6.29 and 2.6.30, all three disks
>>>> are reported correctly.
>>> Can you please attach boot logs of a successful and a failed boot?
>>
>> i have two files attached:
>> - dmesg_good - all hds are available
>> - dmesg_bad - on hd is missing
>
> Can you please apply the attached patch and post the bad boot log?

attached you find boot logs for both a good ad a bad boot

thnx, tim

--
tim@xxxxxxxxxx
http://tim.klingt.org

Every word is like an unnecessary stain on silence and nothingness
Samuel Beckett
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc6 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #9 SMP PREEMPT Sun Aug 16 11:31:47 CEST 2009
[ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf680000 page 4k
[ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 2M
[ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[ 0.000000] RAMDISK: 3783b000 - 37fef34a
[ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf698000 00040
[ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00021712a0] TEXT DATA BSS ==> [0001000000 - 00021712a0]
[ 0.000000] #3 [003783b000 - 0037fef34a] RAMDISK ==> [003783b000 - 0037fef34a]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0002172000 - 0002172288] BRK ==> [0002172000 - 0002172288]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[ 0.000000] [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf680
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143183
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3784 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 22440 pages used for memmap
[ 0.000000] DMA32 zone: 757464 pages, LIFO batch:31
[ 0.000000] Normal zone: 50688 pages used for memmap
[ 0.000000] Normal zone: 2308608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3069856
[ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 12183548k/13631488k available (5210k kernel code, 1058756k absent, 388196k reserved, 2986k data, 516k init)
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2672.399 MHz processor.
[ 0.001519] Console: colour VGA+ 80x25
[ 0.001532] console [tty0] enabled
[ 0.001555] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001557] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001558] ... MAX_LOCK_DEPTH: 48
[ 0.001559] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001560] ... CLASSHASH_SIZE: 4096
[ 0.001561] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.001562] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.001564] ... CHAINHASH_SIZE: 16384
[ 0.001565] memory used by lock dependency info: 5695 kB
[ 0.001566] per task-struct memory footprint: 1920 bytes
[ 0.019760] allocated 125829120 bytes of page_cgroup
[ 0.019763] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.019969] hpet clockevent registered
[ 0.019972] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.019984] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.79 BogoMIPS (lpj=2672399)
[ 0.020103] Security Framework initialized
[ 0.020107] SELinux: Disabled at boot.
[ 0.020157] Mount-cache hash table entries: 256
[ 0.021074] Initializing cgroup subsys ns
[ 0.021077] Initializing cgroup subsys cpuacct
[ 0.021082] Initializing cgroup subsys memory
[ 0.021117] Initializing cgroup subsys freezer
[ 0.021134] CPU: Physical Processor ID: 0
[ 0.021136] CPU: Processor Core ID: 0
[ 0.021138] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021140] CPU: L2 cache: 256K
[ 0.021141] CPU: L3 cache: 8192K
[ 0.021144] using mwait in idle threads.
[ 0.021145] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.021154] ... version: 3
[ 0.021155] ... bit width: 48
[ 0.021156] ... generic counters: 4
[ 0.021158] ... value mask: 0000ffffffffffff
[ 0.021159] ... max period: 000000007fffffff
[ 0.021160] ... fixed-purpose counters: 3
[ 0.021161] ... counter mask: 000000070000000f
[ 0.021985] ACPI: Core revision 20090521
[ 0.060429] Setting APIC routing to flat
[ 0.060912] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070911] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.174995] lockdep: fixing up alternatives.
[ 0.175115] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.185376] Initializing CPU#1
[ 0.246898] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.246906] CPU: Physical Processor ID: 0
[ 0.246907] CPU: Processor Core ID: 1
[ 0.246909] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.246910] CPU: L2 cache: 256K
[ 0.246911] CPU: L3 cache: 8192K
[ 0.247355] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.247362] Skipping synchronization checks as TSC is reliable.
[ 0.247919] lockdep: fixing up alternatives.
[ 0.247945] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.258202] Initializing CPU#2
[ 0.318865] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.318871] CPU: Physical Processor ID: 0
[ 0.318872] CPU: Processor Core ID: 2
[ 0.318874] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.318876] CPU: L2 cache: 256K
[ 0.318877] CPU: L3 cache: 8192K
[ 0.319363] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.319370] Skipping synchronization checks as TSC is reliable.
[ 0.319886] lockdep: fixing up alternatives.
[ 0.319915] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.330173] Initializing CPU#3
[ 0.390834] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339)
[ 0.390840] CPU: Physical Processor ID: 0
[ 0.390841] CPU: Processor Core ID: 3
[ 0.390843] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.390845] CPU: L2 cache: 256K
[ 0.390845] CPU: L3 cache: 8192K
[ 0.391334] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.391341] Skipping synchronization checks as TSC is reliable.
[ 0.391854] lockdep: fixing up alternatives.
[ 0.391881] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.402139] Initializing CPU#4
[ 0.462803] Calibrating delay using timer specific routine.. 5344.66 BogoMIPS (lpj=2672334)
[ 0.462811] CPU: Physical Processor ID: 0
[ 0.462813] CPU: Processor Core ID: 0
[ 0.462815] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.462818] CPU: L2 cache: 256K
[ 0.462819] CPU: L3 cache: 8192K
[ 0.463335] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.463343] Skipping synchronization checks as TSC is reliable.
[ 0.463824] lockdep: fixing up alternatives.
[ 0.463852] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.474109] Initializing CPU#5
[ 0.535773] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725786)
[ 0.535780] CPU: Physical Processor ID: 0
[ 0.535781] CPU: Processor Core ID: 1
[ 0.535783] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.535785] CPU: L2 cache: 256K
[ 0.535786] CPU: L3 cache: 8192K
[ 0.536282] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.536289] Skipping synchronization checks as TSC is reliable.
[ 0.536792] lockdep: fixing up alternatives.
[ 0.536821] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.547078] Initializing CPU#6
[ 0.607740] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[ 0.607746] CPU: Physical Processor ID: 0
[ 0.607747] CPU: Processor Core ID: 2
[ 0.607749] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.607751] CPU: L2 cache: 256K
[ 0.607751] CPU: L3 cache: 8192K
[ 0.608240] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.608249] Skipping synchronization checks as TSC is reliable.
[ 0.608760] lockdep: fixing up alternatives.
[ 0.608789] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.619047] Initializing CPU#7
[ 0.679709] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.679715] CPU: Physical Processor ID: 0
[ 0.679716] CPU: Processor Core ID: 3
[ 0.679718] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.679719] CPU: L2 cache: 256K
[ 0.679720] CPU: L3 cache: 8192K
[ 0.680208] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.680216] Skipping synchronization checks as TSC is reliable.
[ 0.680237] Brought up 8 CPUs
[ 0.680239] Total of 8 processors activated (42864.41 BogoMIPS).
[ 0.680348] CPU0 attaching sched-domain:
[ 0.680350] domain 0: span 0,4 level SIBLING
[ 0.680352] groups: 0 4
[ 0.680356] domain 1: span 0-7 level MC
[ 0.680358] groups: 0,4 1,5 2,6 3,7
[ 0.680375] CPU1 attaching sched-domain:
[ 0.680376] domain 0: span 1,5 level SIBLING
[ 0.680378] groups: 1 5
[ 0.680381] domain 1: span 0-7 level MC
[ 0.680383] groups: 1,5 2,6 3,7 0,4
[ 0.680389] CPU2 attaching sched-domain:
[ 0.680390] domain 0: span 2,6 level SIBLING
[ 0.680392] groups: 2 6
[ 0.680395] domain 1: span 0-7 level MC
[ 0.680397] groups: 2,6 3,7 0,4 1,5
[ 0.680403] CPU3 attaching sched-domain:
[ 0.680404] domain 0: span 3,7 level SIBLING
[ 0.680406] groups: 3 7
[ 0.680409] domain 1: span 0-7 level MC
[ 0.680411] groups: 3,7 0,4 1,5 2,6
[ 0.680416] CPU4 attaching sched-domain:
[ 0.680418] domain 0: span 0,4 level SIBLING
[ 0.680420] groups: 4 0
[ 0.680422] domain 1: span 0-7 level MC
[ 0.680424] groups: 0,4 1,5 2,6 3,7
[ 0.680430] CPU5 attaching sched-domain:
[ 0.680431] domain 0: span 1,5 level SIBLING
[ 0.680433] groups: 5 1
[ 0.680436] domain 1: span 0-7 level MC
[ 0.680438] groups: 1,5 2,6 3,7 0,4
[ 0.680444] CPU6 attaching sched-domain:
[ 0.680445] domain 0: span 2,6 level SIBLING
[ 0.680447] groups: 6 2
[ 0.680450] domain 1: span 0-7 level MC
[ 0.680451] groups: 2,6 3,7 0,4 1,5
[ 0.680457] CPU7 attaching sched-domain:
[ 0.680459] domain 0: span 3,7 level SIBLING
[ 0.680460] groups: 7 3
[ 0.680463] domain 1: span 0-7 level MC
[ 0.680465] groups: 3,7 0,4 1,5 2,6
[ 0.681216] Booting paravirtualized kernel on bare hardware
[ 0.681476] regulator: core version 0.5
[ 0.681502] Time: 9:58:44 Date: 08/16/09
[ 0.681688] NET: Registered protocol family 16
[ 0.682128] ACPI: bus type pci registered
[ 0.682237] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.682239] PCI: Not using MMCONFIG.
[ 0.682241] PCI: Using configuration type 1 for base access
[ 0.683869] bio: create slab <bio-0> at 0
[ 0.686584] ACPI: EC: Look up EC in DSDT
[ 0.725719] ACPI: Interpreter enabled
[ 0.725724] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.725772] ACPI: Using IOAPIC for interrupt routing
[ 0.725838] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.728636] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.730153] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.742498] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246
[ 0.742757] ACPI: No dock devices found.
[ 0.742916] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.743141] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.743145] pci 0000:00:00.0: PME# disabled
[ 0.743218] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.743221] pci 0000:00:01.0: PME# disabled
[ 0.743293] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.743297] pci 0000:00:03.0: PME# disabled
[ 0.743370] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.743373] pci 0000:00:07.0: PME# disabled
[ 0.743785] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 0.743864] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.743945] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.744029] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[ 0.744091] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.744095] pci 0000:00:1a.7: PME# disabled
[ 0.744142] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.744192] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.744196] pci 0000:00:1b.0: PME# disabled
[ 0.744262] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.744265] pci 0000:00:1c.0: PME# disabled
[ 0.744338] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.744341] pci 0000:00:1c.2: PME# disabled
[ 0.744408] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[ 0.744488] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.744567] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 0.744653] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[ 0.744716] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.744720] pci 0000:00:1d.7: PME# disabled
[ 0.744857] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.744860] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.744864] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.744869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.744929] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[ 0.744935] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[ 0.744941] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[ 0.744947] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.744952] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.744958] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.745013] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[ 0.745028] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.745079] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.745085] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.745091] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.745096] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.745102] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.745108] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.745234] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.745244] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.745254] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.745260] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.745265] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[ 0.745343] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.745346] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[ 0.745352] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.745470] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[ 0.745521] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.745543] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[ 0.745558] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[ 0.745566] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[ 0.745610] pci 0000:04:00.0: supports D1 D2
[ 0.745612] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.745617] pci 0000:04:00.0: PME# disabled
[ 0.745694] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.745698] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[ 0.745704] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[ 0.745745] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[ 0.745835] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.745856] pci 0000:06:01.0: supports D1 D2
[ 0.745858] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.745862] pci 0000:06:01.0: PME# disabled
[ 0.745926] pci 0000:00:1e.0: transparent bridge
[ 0.745930] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.745934] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[ 0.745940] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[ 0.745989] pci_bus 0000:00: on NUMA node 0
[ 0.745994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.748578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.748749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.748824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.748909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.748976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.749044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.781975] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.782113] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.782250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.782386] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.782521] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.782673] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.782810] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.782945] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.783279] SCSI subsystem initialized
[ 0.783475] libata version 3.00 loaded.
[ 0.783576] usbcore: registered new interface driver usbfs
[ 0.783597] usbcore: registered new interface driver hub
[ 0.783628] usbcore: registered new device driver usb
[ 0.783816] ACPI: WMI: Mapper loaded
[ 0.783818] PCI: Using ACPI for IRQ routing
[ 0.793233] Bluetooth: Core ver 2.15
[ 0.793283] NET: Registered protocol family 31
[ 0.793284] Bluetooth: HCI device and connection manager initialized
[ 0.793304] Bluetooth: HCI socket layer initialized
[ 0.793306] NET: Registered protocol family 8
[ 0.793308] NET: Registered protocol family 20
[ 0.793325] NetLabel: Initializing
[ 0.793326] NetLabel: domain hash size = 128
[ 0.793327] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.793370] NetLabel: unlabeled traffic allowed by default
[ 0.793632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.793637] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.801722] Switched to high resolution mode on CPU 0
[ 0.802113] Switched to high resolution mode on CPU 3
[ 0.802115] Switched to high resolution mode on CPU 2
[ 0.802129] Switched to high resolution mode on CPU 1
[ 0.802184] Switched to high resolution mode on CPU 7
[ 0.802186] Switched to high resolution mode on CPU 6
[ 0.802187] Switched to high resolution mode on CPU 5
[ 0.802190] Switched to high resolution mode on CPU 4
[ 0.815946] pnp: PnP ACPI init
[ 0.815977] ACPI: bus type pnp registered
[ 0.819661] pnp: PnP ACPI: found 15 devices
[ 0.819663] ACPI: ACPI bus type pnp unregistered
[ 0.819677] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.819681] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.819685] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.819687] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.819690] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[ 0.819692] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 0.819702] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.819709] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.819711] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.819714] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.819717] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.819719] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.819721] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.819729] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.819736] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.819738] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.819745] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.819753] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.819756] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.819758] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.819761] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[ 0.819763] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.824588] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.824589] pci 0000:00:01.0: IO window: disabled
[ 0.824594] pci 0000:00:01.0: MEM window: disabled
[ 0.824597] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.824601] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.824603] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.824608] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff
[ 0.824612] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.824617] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.824618] pci 0000:00:07.0: IO window: disabled
[ 0.824622] pci 0000:00:07.0: MEM window: disabled
[ 0.824626] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.824629] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.824630] pci 0000:00:1c.0: IO window: disabled
[ 0.824635] pci 0000:00:1c.0: MEM window: disabled
[ 0.824639] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[ 0.824645] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.824647] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.824652] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff
[ 0.824656] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[ 0.824669] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[ 0.824671] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff
[ 0.824676] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff
[ 0.824682] pci 0000:06:01.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.824686] pci 0000:06:01.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.824691] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.824693] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.824698] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff
[ 0.824702] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[ 0.824715] pci 0000:00:01.0: setting latency timer to 64
[ 0.824722] pci 0000:00:03.0: setting latency timer to 64
[ 0.824730] pci 0000:00:07.0: setting latency timer to 64
[ 0.824741] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.824745] pci 0000:00:1c.0: setting latency timer to 64
[ 0.824754] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.824757] pci 0000:00:1c.2: setting latency timer to 64
[ 0.824764] pci 0000:00:1e.0: setting latency timer to 64
[ 0.824771] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.824777] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.824779] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.824781] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.824782] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[ 0.824784] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.824786] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[ 0.824788] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.824790] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[ 0.824791] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[ 0.824793] pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
[ 0.824795] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[ 0.824797] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[ 0.824798] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.824800] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.824802] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff]
[ 0.824804] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff]
[ 0.824805] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.824807] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.824930] NET: Registered protocol family 2
[ 0.825151] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.826191] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.826818] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.830812] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.830835] TCP reno registered
[ 0.831060] NET: Registered protocol family 1
[ 0.831264] Trying to unpack rootfs image as initramfs...
[ 0.971116] Freeing initrd memory: 7888k freed
[ 0.972995] Scanning for low memory corruption every 60 seconds
[ 0.973244] audit: initializing netlink socket (disabled)
[ 0.973280] type=2000 audit(1250416723.817:1): initialized
[ 0.977171] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.977572] VFS: Disk quotas dquot_6.5.2
[ 0.977638] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.978581] fuse init (API version 7.12)
[ 0.978647] msgmni has been set to 23813
[ 0.979254] alg: No test for stdrng (krng)
[ 0.979300] io scheduler noop registered
[ 0.979302] io scheduler anticipatory registered
[ 0.979304] io scheduler deadline registered
[ 0.979343] io scheduler cfq registered (default)
[ 0.979502] pci 0000:02:00.0: Boot video device
[ 0.979718] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[ 0.979726] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.979873] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[ 0.979881] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.980017] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[ 0.980024] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.980156] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 0.980165] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.980311] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 0.980319] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.980428] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.980447] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.980457] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.980470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.980613] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.980862] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.980866] ACPI: Power Button [PWRF]
[ 0.980947] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.980950] ACPI: Power Button [PWRB]
[ 0.982003] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.982873] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.985812] Monitor-Mwait will be used to enter C-1 state
[ 0.985856] Monitor-Mwait will be used to enter C-2 state
[ 0.985898] Monitor-Mwait will be used to enter C-3 state
[ 0.986031] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.986165] processor LNXCPU:00: registered as cooling_device0
[ 0.986716] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.987529] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.990501] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.990535] processor LNXCPU:01: registered as cooling_device1
[ 0.991089] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.991910] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.994880] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 0.994915] processor LNXCPU:02: registered as cooling_device2
[ 0.995459] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.996282] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 0.999261] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 0.999298] processor LNXCPU:03: registered as cooling_device3
[ 0.999856] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.000677] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113)
[ 1.003667] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 1.003701] processor LNXCPU:04: registered as cooling_device4
[ 1.004254] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.005086] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113)
[ 1.008058] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 1.008093] processor LNXCPU:05: registered as cooling_device5
[ 1.008641] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.009469] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113)
[ 1.012444] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 1.012483] processor LNXCPU:06: registered as cooling_device6
[ 1.013041] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.013880] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113)
[ 1.016856] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 1.016892] processor LNXCPU:07: registered as cooling_device7
[ 1.020108] XENFS: not registering filesystem on non-xen platform
[ 1.021869] Linux agpgart interface v0.103
[ 1.021874] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.023932] brd: module loaded
[ 1.024638] loop: module loaded
[ 1.024730] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.024921] ata_piix 0000:00:1f.2: version 2.13
[ 1.024939] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.024943] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.024996] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.025077] scsi0 : ata_piix
[ 1.025370] scsi1 : ata_piix
[ 1.027206] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[ 1.027211] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[ 1.027235] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.027239] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.027279] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.027297] ata1.00: hard resetting link
[ 1.027331] scsi2 : ata_piix
[ 1.027336] ata2.00: hard resetting link
[ 1.027404] scsi3 : ata_piix
[ 1.029179] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[ 1.029183] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[ 1.030290] Fixed MDIO Bus: probed
[ 1.030294] PPP generic driver version 2.4.2
[ 1.030518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.030542] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.030553] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.030556] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.031371] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.035303] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.035309] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.035325] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[ 1.039313] ata3: hard resetting link
[ 1.039327] ata4: hard resetting link
[ 1.044613] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.045062] usb usb1: configuration #1 chosen from 1 choice
[ 1.045257] hub 1-0:1.0: USB hub found
[ 1.045284] hub 1-0:1.0: 6 ports detected
[ 1.045593] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.045603] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.045606] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.045724] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.049642] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.049647] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.049663] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[ 1.058584] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.058708] usb usb2: configuration #1 chosen from 1 choice
[ 1.058746] hub 2-0:1.0: USB hub found
[ 1.058753] hub 2-0:1.0: 6 ports detected
[ 1.058860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.058885] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.058924] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.058930] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.058933] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.058990] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.059023] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.059141] usb usb3: configuration #1 chosen from 1 choice
[ 1.059180] hub 3-0:1.0: USB hub found
[ 1.059225] hub 3-0:1.0: 2 ports detected
[ 1.059324] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.059330] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.059333] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.059386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.059419] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.059522] usb usb4: configuration #1 chosen from 1 choice
[ 1.059561] hub 4-0:1.0: USB hub found
[ 1.059568] hub 4-0:1.0: 2 ports detected
[ 1.059658] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.059664] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.059667] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.059719] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.059753] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 1.059860] usb usb5: configuration #1 chosen from 1 choice
[ 1.059898] hub 5-0:1.0: USB hub found
[ 1.059904] hub 5-0:1.0: 2 ports detected
[ 1.059983] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.059988] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.059991] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.060044] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.060069] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.060169] usb usb6: configuration #1 chosen from 1 choice
[ 1.060206] hub 6-0:1.0: USB hub found
[ 1.060213] hub 6-0:1.0: 2 ports detected
[ 1.060287] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.060293] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.060296] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.060350] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.060373] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.060497] usb usb7: configuration #1 chosen from 1 choice
[ 1.060536] hub 7-0:1.0: USB hub found
[ 1.060570] hub 7-0:1.0: 2 ports detected
[ 1.060649] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.060654] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.060657] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.060710] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.060734] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.060841] usb usb8: configuration #1 chosen from 1 choice
[ 1.060880] hub 8-0:1.0: USB hub found
[ 1.060886] hub 8-0:1.0: 2 ports detected
[ 1.061031] PNP: No PS/2 controller found. Probing ports directly.
[ 1.063575] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.063605] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.063993] mice: PS/2 mouse device common for all mice
[ 1.064114] rtc_cmos 00:03: RTC can wake from S4
[ 1.064324] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.064351] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.064493] device-mapper: uevent: version 1.0.3
[ 1.064605] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 1.064808] device-mapper: multipath: version 1.1.0 loaded
[ 1.064839] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.065695] cpuidle: using governor ladder
[ 1.066422] cpuidle: using governor menu
[ 1.067084] TCP cubic registered
[ 1.067436] NET: Registered protocol family 10
[ 1.068535] lo: Disabled Privacy Extensions
[ 1.069232] NET: Registered protocol family 17
[ 1.069298] Bluetooth: L2CAP ver 2.13
[ 1.069299] Bluetooth: L2CAP socket layer initialized
[ 1.069303] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.069304] Bluetooth: SCO socket layer initialized
[ 1.069487] Bluetooth: RFCOMM TTY layer initialized
[ 1.069490] Bluetooth: RFCOMM socket layer initialized
[ 1.069491] Bluetooth: RFCOMM ver 1.11
[ 1.077532] PM: Resume from disk failed.
[ 1.077549] registered taskstats version 1
[ 1.077796] Magic number: 5:609:980
[ 1.077946] rtc_cmos 00:03: setting system clock to 2009-08-16 09:58:44 UTC (1250416724)
[ 1.077948] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.077949] EDD information not available.
[ 1.331609] ata1.01: hard resetting link
[ 1.331629] ata2.01: hard resetting link
[ 1.343626] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.343638] ata3: EH complete
[ 1.494538] ata4.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.494542] ata4.00: XXX ata_dev_classify=1
[ 1.494572] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.517008] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.517013] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.519933] ata4.00: configured for UDMA/133
[ 1.519939] ata4: EH complete
[ 1.552515] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.719050] usb 3-1: configuration #1 chosen from 1 choice
[ 1.787399] ata1.00: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.787403] ata1.00: XXX ata_dev_classify=3
[ 1.787414] ata1.01: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.787416] ata1.01: XXX ata_dev_classify=3
[ 1.787448] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.787460] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.787643] ata2.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.787645] ata2.00: XXX ata_dev_classify=1
[ 1.787654] ata2.01: XXX CLASSIFY TF 00/01:01:00:00
[ 1.787655] ata2.01: XXX ata_dev_classify=1
[ 1.787657] ata2.01: XXX stat==0 -> NONE
[ 1.787688] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.787698] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.790664] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[ 1.796649] ata1.00: configured for UDMA/100
[ 1.797032] ata1: EH complete
[ 1.798481] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5
[ 1.802777] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.802782] Uniform CD-ROM driver Revision: 3.20
[ 1.803076] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.803472] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.809877] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.809881] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.828889] ata2.00: configured for UDMA/133
[ 1.828895] ata2: EH complete
[ 1.829040] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.829344] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.829404] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.829425] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.829463] sd 1:0:0:0: [sda] Write Protect is off
[ 1.829465] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.829494] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829566] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.829621] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.829623] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.829651] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829849] sda:
[ 1.830010] sdb:
[ 1.830170] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.834614] sdb1
[ 1.835146] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.843428] sda1 sda2 < sda5 >
[ 1.866152] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.866319] Freeing unused kernel memory: 516k freed
[ 1.866440] Write protecting the kernel read-only data: 7332k
[ 1.970304] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.037608] Floppy drive(s): fd0 is 1.44M
[ 2.053200] FDC 0 is a post-1991 82077
[ 2.054523] usbcore: registered new interface driver hiddev
[ 2.057721] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.057738] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.057773] r8169 0000:04:00.0: setting latency timer to 64
[ 2.057829] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[ 2.058997] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[ 2.080060] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.080678] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[ 2.106917] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 2.107066] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[ 2.107100] usbcore: registered new interface driver usbhid
[ 2.107104] usbhid: v2.6:USB HID core driver
[ 2.131861] usb 3-2: configuration #1 chosen from 1 choice
[ 2.147892] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 2.148056] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 2.408925] PM: Starting manual resume from disk
[ 2.408935] PM: Resume from partition 8:5
[ 2.408936] PM: Checking hibernation image.
[ 2.409250] PM: Resume from disk failed.
[ 2.449511] EXT4-fs (sda1): barriers enabled
[ 2.471579] kjournald2 starting: pid 984, dev sda1:8, commit interval 5 seconds
[ 2.471642] EXT4-fs (sda1): delayed allocation enabled
[ 2.471646] EXT4-fs: file extents enabled
[ 2.515891] EXT4-fs: mballoc enabled
[ 2.515948] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.790238] udev: starting version 141
[ 6.643641] nvidia: module license 'NVIDIA' taints kernel.
[ 6.643644] Disabling lock debugging due to kernel taint
[ 6.713407] iTCO_vendor_support: vendor-support=0
[ 6.745015] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.825290] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[ 6.825375] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.825378] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[ 6.825383] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[ 6.871309] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.871412] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.871455] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.896510] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 6.896516] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.896622] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18.03 Fri Jul 31 21:54:40 PDT 2009
[ 6.903074] cfg80211: Calling CRDA to update world regulatory domain
[ 6.985649] cfg80211: World regulatory domain updated:
[ 6.985651] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.985653] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.985655] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.985657] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.985659] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.985660] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.050758] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[ 7.050761] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[ 7.050764] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 7.050771] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 7.050774] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[ 7.050777] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[ 7.140241] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.247149] phy0: Selected rate control algorithm 'minstrel'
[ 7.247885] Registered led device: rt61pci-phy0::radio
[ 7.247901] Registered led device: rt61pci-phy0::assoc
[ 7.383834] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.383861] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.437592] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[ 7.674686] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 7.674721] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 7.674788] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[ 7.728624] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[ 7.728633] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.576337] Hammerfall-DSP: Firmware already present, initializing card.
[ 10.745334] lp: driver loaded but no devices found
[ 10.907540] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 11.445625] EXT4-fs (sda1): internal journal on sda1:8
[ 16.400458] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.400460] Bluetooth: BNEP filters: protocol multicast
[ 16.422571] Bridge firewalling registered
[ 17.677135] ppdev: user-space parallel port driver
[ 21.569090] r8169: eth0: link down
[ 21.570298] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.570910] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[ 21.802482] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.954864] wlan0: authenticate with AP 00:24:fe:09:94:18
[ 39.956898] wlan0: authenticated
[ 39.956902] wlan0: associate with AP 00:24:fe:09:94:18
[ 39.959503] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=1)
[ 39.959507] wlan0: associated
[ 39.961036] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 50.238515] wlan0: no IPv6 routers present
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc6 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #9 SMP PREEMPT Sun Aug 16 11:31:47 CEST 2009
[ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf680000 page 4k
[ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 2M
[ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[ 0.000000] RAMDISK: 3783b000 - 37fef34a
[ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf698000 00040
[ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00021712a0] TEXT DATA BSS ==> [0001000000 - 00021712a0]
[ 0.000000] #3 [003783b000 - 0037fef34a] RAMDISK ==> [003783b000 - 0037fef34a]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0002172000 - 0002172288] BRK ==> [0002172000 - 0002172288]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[ 0.000000] [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf680
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143183
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3784 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 22440 pages used for memmap
[ 0.000000] DMA32 zone: 757464 pages, LIFO batch:31
[ 0.000000] Normal zone: 50688 pages used for memmap
[ 0.000000] Normal zone: 2308608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3069856
[ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 12183548k/13631488k available (5210k kernel code, 1058756k absent, 388196k reserved, 2986k data, 516k init)
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2672.409 MHz processor.
[ 0.001520] Console: colour VGA+ 80x25
[ 0.001533] console [tty0] enabled
[ 0.001557] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001558] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001559] ... MAX_LOCK_DEPTH: 48
[ 0.001560] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001562] ... CLASSHASH_SIZE: 4096
[ 0.001563] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.001564] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.001565] ... CHAINHASH_SIZE: 16384
[ 0.001566] memory used by lock dependency info: 5695 kB
[ 0.001567] per task-struct memory footprint: 1920 bytes
[ 0.019778] allocated 125829120 bytes of page_cgroup
[ 0.019780] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.019986] hpet clockevent registered
[ 0.019990] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.020002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.81 BogoMIPS (lpj=2672409)
[ 0.020121] Security Framework initialized
[ 0.020124] SELinux: Disabled at boot.
[ 0.020174] Mount-cache hash table entries: 256
[ 0.021093] Initializing cgroup subsys ns
[ 0.021096] Initializing cgroup subsys cpuacct
[ 0.021101] Initializing cgroup subsys memory
[ 0.021135] Initializing cgroup subsys freezer
[ 0.021153] CPU: Physical Processor ID: 0
[ 0.021154] CPU: Processor Core ID: 0
[ 0.021157] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021159] CPU: L2 cache: 256K
[ 0.021160] CPU: L3 cache: 8192K
[ 0.021162] using mwait in idle threads.
[ 0.021163] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.021172] ... version: 3
[ 0.021174] ... bit width: 48
[ 0.021175] ... generic counters: 4
[ 0.021176] ... value mask: 0000ffffffffffff
[ 0.021177] ... max period: 000000007fffffff
[ 0.021179] ... fixed-purpose counters: 3
[ 0.021180] ... counter mask: 000000070000000f
[ 0.022006] ACPI: Core revision 20090521
[ 0.060458] Setting APIC routing to flat
[ 0.060940] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070938] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.175012] lockdep: fixing up alternatives.
[ 0.175134] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.185395] Initializing CPU#1
[ 0.246915] Calibrating delay using timer specific routine.. 5451.58 BogoMIPS (lpj=2725792)
[ 0.246923] CPU: Physical Processor ID: 0
[ 0.246924] CPU: Processor Core ID: 1
[ 0.246927] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.246928] CPU: L2 cache: 256K
[ 0.246929] CPU: L3 cache: 8192K
[ 0.247418] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.247425] Skipping synchronization checks as TSC is reliable.
[ 0.247937] lockdep: fixing up alternatives.
[ 0.247962] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.258220] Initializing CPU#2
[ 0.318883] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[ 0.318889] CPU: Physical Processor ID: 0
[ 0.318890] CPU: Processor Core ID: 2
[ 0.318892] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.318893] CPU: L2 cache: 256K
[ 0.318894] CPU: L3 cache: 8192K
[ 0.319381] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.319389] Skipping synchronization checks as TSC is reliable.
[ 0.319903] lockdep: fixing up alternatives.
[ 0.319933] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.330190] Initializing CPU#3
[ 0.390851] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
[ 0.390858] CPU: Physical Processor ID: 0
[ 0.390859] CPU: Processor Core ID: 3
[ 0.390861] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.390862] CPU: L2 cache: 256K
[ 0.390863] CPU: L3 cache: 8192K
[ 0.391352] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.391359] Skipping synchronization checks as TSC is reliable.
[ 0.391871] lockdep: fixing up alternatives.
[ 0.391899] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.402157] Initializing CPU#4
[ 0.463821] Calibrating delay using timer specific routine.. 5451.56 BogoMIPS (lpj=2725783)
[ 0.463831] CPU: Physical Processor ID: 0
[ 0.463832] CPU: Processor Core ID: 0
[ 0.463835] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.463837] CPU: L2 cache: 256K
[ 0.463838] CPU: L3 cache: 8192K
[ 0.464352] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.464360] Skipping synchronization checks as TSC is reliable.
[ 0.464841] lockdep: fixing up alternatives.
[ 0.464869] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.475126] Initializing CPU#5
[ 0.535789] Calibrating delay using timer specific routine.. 5344.68 BogoMIPS (lpj=2672340)
[ 0.535795] CPU: Physical Processor ID: 0
[ 0.535796] CPU: Processor Core ID: 1
[ 0.535798] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.535799] CPU: L2 cache: 256K
[ 0.535800] CPU: L3 cache: 8192K
[ 0.536288] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.536296] Skipping synchronization checks as TSC is reliable.
[ 0.536809] lockdep: fixing up alternatives.
[ 0.536838] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.547095] Initializing CPU#6
[ 0.607758] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[ 0.607764] CPU: Physical Processor ID: 0
[ 0.607764] CPU: Processor Core ID: 2
[ 0.607766] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.607768] CPU: L2 cache: 256K
[ 0.607769] CPU: L3 cache: 8192K
[ 0.608258] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.608265] Skipping synchronization checks as TSC is reliable.
[ 0.608778] lockdep: fixing up alternatives.
[ 0.608806] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.619064] Initializing CPU#7
[ 0.679727] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339)
[ 0.679733] CPU: Physical Processor ID: 0
[ 0.679734] CPU: Processor Core ID: 3
[ 0.679735] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.679737] CPU: L2 cache: 256K
[ 0.679738] CPU: L3 cache: 8192K
[ 0.680226] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.680233] Skipping synchronization checks as TSC is reliable.
[ 0.680254] Brought up 8 CPUs
[ 0.680256] Total of 8 processors activated (42971.35 BogoMIPS).
[ 0.680365] CPU0 attaching sched-domain:
[ 0.680367] domain 0: span 0,4 level SIBLING
[ 0.680369] groups: 0 4
[ 0.680373] domain 1: span 0-7 level MC
[ 0.680375] groups: 0,4 1,5 2,6 3,7
[ 0.680392] CPU1 attaching sched-domain:
[ 0.680394] domain 0: span 1,5 level SIBLING
[ 0.680395] groups: 1 5
[ 0.680398] domain 1: span 0-7 level MC
[ 0.680400] groups: 1,5 2,6 3,7 0,4
[ 0.680406] CPU2 attaching sched-domain:
[ 0.680408] domain 0: span 2,6 level SIBLING
[ 0.680409] groups: 2 6
[ 0.680412] domain 1: span 0-7 level MC
[ 0.680414] groups: 2,6 3,7 0,4 1,5
[ 0.680420] CPU3 attaching sched-domain:
[ 0.680421] domain 0: span 3,7 level SIBLING
[ 0.680423] groups: 3 7
[ 0.680426] domain 1: span 0-7 level MC
[ 0.680428] groups: 3,7 0,4 1,5 2,6
[ 0.680433] CPU4 attaching sched-domain:
[ 0.680435] domain 0: span 0,4 level SIBLING
[ 0.680437] groups: 4 0
[ 0.680440] domain 1: span 0-7 level MC
[ 0.680441] groups: 0,4 1,5 2,6 3,7
[ 0.680447] CPU5 attaching sched-domain:
[ 0.680448] domain 0: span 1,5 level SIBLING
[ 0.680450] groups: 5 1
[ 0.680453] domain 1: span 0-7 level MC
[ 0.680455] groups: 1,5 2,6 3,7 0,4
[ 0.680461] CPU6 attaching sched-domain:
[ 0.680462] domain 0: span 2,6 level SIBLING
[ 0.680464] groups: 6 2
[ 0.680467] domain 1: span 0-7 level MC
[ 0.680469] groups: 2,6 3,7 0,4 1,5
[ 0.680474] CPU7 attaching sched-domain:
[ 0.680476] domain 0: span 3,7 level SIBLING
[ 0.680477] groups: 7 3
[ 0.680480] domain 1: span 0-7 level MC
[ 0.680482] groups: 3,7 0,4 1,5 2,6
[ 0.681232] Booting paravirtualized kernel on bare hardware
[ 0.681492] regulator: core version 0.5
[ 0.681518] Time: 10:01:40 Date: 08/16/09
[ 0.681702] NET: Registered protocol family 16
[ 0.682142] ACPI: bus type pci registered
[ 0.682251] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.682253] PCI: Not using MMCONFIG.
[ 0.682255] PCI: Using configuration type 1 for base access
[ 0.683886] bio: create slab <bio-0> at 0
[ 0.686600] ACPI: EC: Look up EC in DSDT
[ 0.727800] ACPI: Interpreter enabled
[ 0.727804] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.727852] ACPI: Using IOAPIC for interrupt routing
[ 0.727917] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.730718] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.732232] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.744566] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246
[ 0.744826] ACPI: No dock devices found.
[ 0.744984] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.745212] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.745216] pci 0000:00:00.0: PME# disabled
[ 0.745286] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.745289] pci 0000:00:01.0: PME# disabled
[ 0.745361] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.745364] pci 0000:00:03.0: PME# disabled
[ 0.745437] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.745441] pci 0000:00:07.0: PME# disabled
[ 0.745853] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 0.745932] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.746012] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.746097] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[ 0.746158] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.746162] pci 0000:00:1a.7: PME# disabled
[ 0.746212] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.746259] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.746263] pci 0000:00:1b.0: PME# disabled
[ 0.746328] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.746332] pci 0000:00:1c.0: PME# disabled
[ 0.746404] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.746408] pci 0000:00:1c.2: PME# disabled
[ 0.746475] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[ 0.746555] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.746633] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 0.746721] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[ 0.746782] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.746786] pci 0000:00:1d.7: PME# disabled
[ 0.746923] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.746926] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.746930] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.746935] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.746995] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[ 0.747001] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[ 0.747007] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[ 0.747013] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.747018] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.747024] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.747079] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[ 0.747094] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.747144] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.747150] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.747156] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.747162] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.747168] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.747174] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.747299] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.747309] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.747319] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.747325] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.747331] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[ 0.747408] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.747412] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[ 0.747417] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.747535] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[ 0.747587] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.747608] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[ 0.747623] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[ 0.747631] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[ 0.747675] pci 0000:04:00.0: supports D1 D2
[ 0.747677] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.747682] pci 0000:04:00.0: PME# disabled
[ 0.747758] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.747762] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[ 0.747768] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[ 0.747808] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[ 0.747898] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.747920] pci 0000:06:01.0: supports D1 D2
[ 0.747921] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.747925] pci 0000:06:01.0: PME# disabled
[ 0.747989] pci 0000:00:1e.0: transparent bridge
[ 0.747992] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.747996] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[ 0.748002] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[ 0.748052] pci_bus 0000:00: on NUMA node 0
[ 0.748057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.748493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.748644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.748721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.748806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.748873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.748940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.781836] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.781973] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.782105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.782245] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.782380] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.782531] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.782667] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.782806] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.783128] SCSI subsystem initialized
[ 0.783327] libata version 3.00 loaded.
[ 0.783427] usbcore: registered new interface driver usbfs
[ 0.783448] usbcore: registered new interface driver hub
[ 0.783479] usbcore: registered new device driver usb
[ 0.783661] ACPI: WMI: Mapper loaded
[ 0.783663] PCI: Using ACPI for IRQ routing
[ 0.792245] Bluetooth: Core ver 2.15
[ 0.792280] NET: Registered protocol family 31
[ 0.792282] Bluetooth: HCI device and connection manager initialized
[ 0.792302] Bluetooth: HCI socket layer initialized
[ 0.792304] NET: Registered protocol family 8
[ 0.792305] NET: Registered protocol family 20
[ 0.792322] NetLabel: Initializing
[ 0.792324] NetLabel: domain hash size = 128
[ 0.792325] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.792367] NetLabel: unlabeled traffic allowed by default
[ 0.792628] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.792633] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.800727] Switched to high resolution mode on CPU 0
[ 0.801140] Switched to high resolution mode on CPU 2
[ 0.801142] Switched to high resolution mode on CPU 3
[ 0.801155] Switched to high resolution mode on CPU 1
[ 0.801208] Switched to high resolution mode on CPU 5
[ 0.801210] Switched to high resolution mode on CPU 7
[ 0.801212] Switched to high resolution mode on CPU 6
[ 0.801218] Switched to high resolution mode on CPU 4
[ 0.814972] pnp: PnP ACPI init
[ 0.815011] ACPI: bus type pnp registered
[ 0.818700] pnp: PnP ACPI: found 15 devices
[ 0.818703] ACPI: ACPI bus type pnp unregistered
[ 0.818719] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.818721] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.818724] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.818726] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.818729] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[ 0.818731] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 0.818740] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.818747] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.818750] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.818752] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.818755] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.818757] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.818759] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.818767] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.818774] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.818776] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.818783] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.818792] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.818794] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.818796] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.818799] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[ 0.818801] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.823716] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.823717] pci 0000:00:01.0: IO window: disabled
[ 0.823722] pci 0000:00:01.0: MEM window: disabled
[ 0.823725] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.823729] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.823731] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.823736] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff
[ 0.823740] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.823745] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.823747] pci 0000:00:07.0: IO window: disabled
[ 0.823751] pci 0000:00:07.0: MEM window: disabled
[ 0.823754] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.823757] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.823759] pci 0000:00:1c.0: IO window: disabled
[ 0.823763] pci 0000:00:1c.0: MEM window: disabled
[ 0.823767] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[ 0.823773] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.823776] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.823780] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff
[ 0.823784] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[ 0.823798] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[ 0.823799] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff
[ 0.823804] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff
[ 0.823808] pci 0000:06:01.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.823813] pci 0000:06:01.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.823817] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.823820] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.823824] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff
[ 0.823828] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[ 0.823841] pci 0000:00:01.0: setting latency timer to 64
[ 0.823849] pci 0000:00:03.0: setting latency timer to 64
[ 0.823857] pci 0000:00:07.0: setting latency timer to 64
[ 0.823867] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.823871] pci 0000:00:1c.0: setting latency timer to 64
[ 0.823880] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.823884] pci 0000:00:1c.2: setting latency timer to 64
[ 0.823891] pci 0000:00:1e.0: setting latency timer to 64
[ 0.823898] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.823904] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.823905] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.823907] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.823909] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[ 0.823911] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.823913] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[ 0.823915] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.823917] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[ 0.823918] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[ 0.823920] pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
[ 0.823922] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[ 0.823924] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[ 0.823925] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.823927] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.823929] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff]
[ 0.823930] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff]
[ 0.823932] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.823934] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.824053] NET: Registered protocol family 2
[ 0.824272] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.825359] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.825986] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.829979] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.830001] TCP reno registered
[ 0.830217] NET: Registered protocol family 1
[ 0.830420] Trying to unpack rootfs image as initramfs...
[ 0.970272] Freeing initrd memory: 7888k freed
[ 0.974260] Scanning for low memory corruption every 60 seconds
[ 0.974504] audit: initializing netlink socket (disabled)
[ 0.974540] type=2000 audit(1250416900.818:1): initialized
[ 0.978459] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.978867] VFS: Disk quotas dquot_6.5.2
[ 0.978938] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.979896] fuse init (API version 7.12)
[ 0.979960] msgmni has been set to 23813
[ 0.980574] alg: No test for stdrng (krng)
[ 0.980605] io scheduler noop registered
[ 0.980607] io scheduler anticipatory registered
[ 0.980608] io scheduler deadline registered
[ 0.980653] io scheduler cfq registered (default)
[ 0.980812] pci 0000:02:00.0: Boot video device
[ 0.981034] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[ 0.981042] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.981182] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[ 0.981189] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.981324] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[ 0.981332] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.981464] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 0.981473] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.981619] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 0.981627] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.981741] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.981761] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.981771] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.981783] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.981934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.982178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.982181] ACPI: Power Button [PWRF]
[ 0.982262] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.982264] ACPI: Power Button [PWRB]
[ 0.983324] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.984200] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.987137] Monitor-Mwait will be used to enter C-1 state
[ 0.987180] Monitor-Mwait will be used to enter C-2 state
[ 0.987224] Monitor-Mwait will be used to enter C-3 state
[ 0.987358] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.987491] processor LNXCPU:00: registered as cooling_device0
[ 0.988048] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.988863] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.991837] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.991872] processor LNXCPU:01: registered as cooling_device1
[ 0.992422] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.993245] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.996214] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 0.996248] processor LNXCPU:02: registered as cooling_device2
[ 0.996796] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.997617] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 1.000600] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 1.000642] processor LNXCPU:03: registered as cooling_device3
[ 1.001195] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.002022] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113)
[ 1.005032] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 1.005067] processor LNXCPU:04: registered as cooling_device4
[ 1.005611] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.006445] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113)
[ 1.009422] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 1.009457] processor LNXCPU:05: registered as cooling_device5
[ 1.010013] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.010842] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113)
[ 1.013821] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 1.013859] processor LNXCPU:06: registered as cooling_device6
[ 1.014417] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.015253] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113)
[ 1.018226] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 1.018262] processor LNXCPU:07: registered as cooling_device7
[ 1.021488] XENFS: not registering filesystem on non-xen platform
[ 1.023261] Linux agpgart interface v0.103
[ 1.023265] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.025337] brd: module loaded
[ 1.026057] loop: module loaded
[ 1.026148] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.026333] ata_piix 0000:00:1f.2: version 2.13
[ 1.026351] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.026355] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.026408] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.026488] scsi0 : ata_piix
[ 1.026789] scsi1 : ata_piix
[ 1.028629] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[ 1.028634] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[ 1.028658] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.028663] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.028704] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.028721] ata1.00: hard resetting link
[ 1.028751] scsi2 : ata_piix
[ 1.028757] ata2.00: hard resetting link
[ 1.028826] scsi3 : ata_piix
[ 1.030607] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[ 1.030612] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[ 1.031735] Fixed MDIO Bus: probed
[ 1.031739] PPP generic driver version 2.4.2
[ 1.031969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.031993] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.032005] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.032008] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.032826] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.033656] ata3: hard resetting link
[ 1.033673] ata4: hard resetting link
[ 1.036763] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.036769] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.036785] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[ 1.045639] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.046101] usb usb1: configuration #1 chosen from 1 choice
[ 1.046296] hub 1-0:1.0: USB hub found
[ 1.046322] hub 1-0:1.0: 6 ports detected
[ 1.046614] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.046625] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.046628] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.046747] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.050644] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.050650] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.050665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[ 1.059610] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.059737] usb usb2: configuration #1 chosen from 1 choice
[ 1.059775] hub 2-0:1.0: USB hub found
[ 1.059782] hub 2-0:1.0: 6 ports detected
[ 1.059916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.059941] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.059980] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.059986] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.059989] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.060046] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.060079] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.060183] usb usb3: configuration #1 chosen from 1 choice
[ 1.060222] hub 3-0:1.0: USB hub found
[ 1.060267] hub 3-0:1.0: 2 ports detected
[ 1.060367] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.060373] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.060376] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.060428] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.060462] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.060579] usb usb4: configuration #1 chosen from 1 choice
[ 1.060628] hub 4-0:1.0: USB hub found
[ 1.060634] hub 4-0:1.0: 2 ports detected
[ 1.060717] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.060723] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.060726] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.060778] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.060812] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 1.060919] usb usb5: configuration #1 chosen from 1 choice
[ 1.060957] hub 5-0:1.0: USB hub found
[ 1.060963] hub 5-0:1.0: 2 ports detected
[ 1.061043] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.061048] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.061051] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.061104] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.061129] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.061229] usb usb6: configuration #1 chosen from 1 choice
[ 1.061267] hub 6-0:1.0: USB hub found
[ 1.061273] hub 6-0:1.0: 2 ports detected
[ 1.061348] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.061353] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.061356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.061411] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.061434] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.061536] usb usb7: configuration #1 chosen from 1 choice
[ 1.061573] hub 7-0:1.0: USB hub found
[ 1.061610] hub 7-0:1.0: 2 ports detected
[ 1.061687] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.061693] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.061696] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.061748] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.061775] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.061883] usb usb8: configuration #1 chosen from 1 choice
[ 1.061922] hub 8-0:1.0: USB hub found
[ 1.061929] hub 8-0:1.0: 2 ports detected
[ 1.062073] PNP: No PS/2 controller found. Probing ports directly.
[ 1.064630] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.064660] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.065046] mice: PS/2 mouse device common for all mice
[ 1.065168] rtc_cmos 00:03: RTC can wake from S4
[ 1.065377] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.065404] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.065545] device-mapper: uevent: version 1.0.3
[ 1.065653] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 1.065862] device-mapper: multipath: version 1.1.0 loaded
[ 1.065893] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.066752] cpuidle: using governor ladder
[ 1.067480] cpuidle: using governor menu
[ 1.068144] TCP cubic registered
[ 1.068460] NET: Registered protocol family 10
[ 1.069529] lo: Disabled Privacy Extensions
[ 1.070228] NET: Registered protocol family 17
[ 1.070294] Bluetooth: L2CAP ver 2.13
[ 1.070295] Bluetooth: L2CAP socket layer initialized
[ 1.070299] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.070300] Bluetooth: SCO socket layer initialized
[ 1.070411] Bluetooth: RFCOMM TTY layer initialized
[ 1.070414] Bluetooth: RFCOMM socket layer initialized
[ 1.070416] Bluetooth: RFCOMM ver 1.11
[ 1.078604] PM: Resume from disk failed.
[ 1.078621] registered taskstats version 1
[ 1.078865] Magic number: 5:235:22
[ 1.079012] rtc_cmos 00:03: setting system clock to 2009-08-16 10:01:41 UTC (1250416901)
[ 1.079015] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.079016] EDD information not available.
[ 1.332631] ata2.01: hard resetting link
[ 1.332652] ata1.01: hard resetting link
[ 1.489548] ata3.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.489552] ata3.00: XXX ata_dev_classify=1
[ 1.489562] ata4.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.489566] ata4.00: XXX ata_dev_classify=1
[ 1.489584] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.489599] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.493051] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.493056] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.495941] ata4.00: configured for UDMA/133
[ 1.495948] ata4: EH complete
[ 1.508914] ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01112, max UDMA7
[ 1.508919] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.527919] ata3.00: configured for UDMA/133
[ 1.527926] ata3: EH complete
[ 1.553540] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.720092] usb 3-1: configuration #1 chosen from 1 choice
[ 1.788427] ata1.00: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.788431] ata1.00: XXX ata_dev_classify=3
[ 1.788442] ata1.01: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.788444] ata1.01: XXX ata_dev_classify=3
[ 1.788475] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.788487] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.788671] ata2.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.788672] ata2.00: XXX ata_dev_classify=1
[ 1.788681] ata2.01: XXX CLASSIFY TF 00/01:01:00:00
[ 1.788683] ata2.01: XXX ata_dev_classify=1
[ 1.788685] ata2.01: XXX stat==0 -> NONE
[ 1.788715] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.788725] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.791691] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[ 1.797676] ata1.00: configured for UDMA/100
[ 1.798055] ata1: EH complete
[ 1.799471] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5
[ 1.804136] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.804141] Uniform CD-ROM driver Revision: 3.20
[ 1.804518] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.804862] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.810908] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.810913] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.829917] ata2.00: configured for UDMA/133
[ 1.829923] ata2: EH complete
[ 1.830166] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.830531] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.830539] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.830595] sd 1:0:0:0: [sda] Write Protect is off
[ 1.830597] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.830626] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.830722] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.830874] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.830917] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.830952] sda:
[ 1.830971] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.830973] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.831001] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.831226] sdb:
[ 1.831358] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.831539] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.831547] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.831603] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.831605] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.831641] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.831800] sdc: sda1 sda2 < sdb1
[ 1.839816] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.842328] sdc1
[ 1.842692] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.861374] sda5 >
[ 1.861804] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.861969] Freeing unused kernel memory: 516k freed
[ 1.862041] Write protecting the kernel read-only data: 7332k
[ 1.971312] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.031093] Floppy drive(s): fd0 is 1.44M
[ 2.040606] usbcore: registered new interface driver hiddev
[ 2.045861] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.045884] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.045931] r8169 0000:04:00.0: setting latency timer to 64
[ 2.046005] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[ 2.046156] FDC 0 is a post-1991 82077
[ 2.047595] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[ 2.060058] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.060837] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[ 2.084967] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 2.085182] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[ 2.085229] usbcore: registered new interface driver usbhid
[ 2.085233] usbhid: v2.6:USB HID core driver
[ 2.136902] usb 3-2: configuration #1 chosen from 1 choice
[ 2.152942] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 2.153081] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 2.305656] PM: Starting manual resume from disk
[ 2.305666] PM: Resume from partition 8:5
[ 2.305667] PM: Checking hibernation image.
[ 2.306033] PM: Resume from disk failed.
[ 2.370567] EXT4-fs (sda1): barriers enabled
[ 2.392671] kjournald2 starting: pid 1002, dev sda1:8, commit interval 5 seconds
[ 2.392727] EXT4-fs (sda1): delayed allocation enabled
[ 2.392731] EXT4-fs: file extents enabled
[ 2.436698] EXT4-fs: mballoc enabled
[ 2.436754] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.727989] udev: starting version 141
[ 6.450614] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.590368] nvidia: module license 'NVIDIA' taints kernel.
[ 6.590371] Disabling lock debugging due to kernel taint
[ 6.675991] iTCO_vendor_support: vendor-support=0
[ 6.712563] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.712701] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.712760] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.763234] cfg80211: Calling CRDA to update world regulatory domain
[ 6.820893] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[ 6.820913] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.820916] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[ 6.820922] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[ 6.849097] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 6.849104] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.849232] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18.03 Fri Jul 31 21:54:40 PDT 2009
[ 6.881838] cfg80211: World regulatory domain updated:
[ 6.881841] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.881843] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.881845] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.881847] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.881849] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.881850] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.045648] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[ 7.045651] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[ 7.045654] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 7.045661] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 7.045664] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[ 7.045666] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[ 7.046115] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.133521] phy0: Selected rate control algorithm 'minstrel'
[ 7.134306] Registered led device: rt61pci-phy0::radio
[ 7.134322] Registered led device: rt61pci-phy0::assoc
[ 7.246876] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.246903] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.300602] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[ 7.669739] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 7.669771] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 7.669839] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[ 7.724277] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[ 7.724286] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.572399] Hammerfall-DSP: Firmware already present, initializing card.
[ 10.749926] lp: driver loaded but no devices found
[ 10.907738] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 11.444842] EXT4-fs (sda1): internal journal on sda1:8
[ 16.686293] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.686295] Bluetooth: BNEP filters: protocol multicast
[ 16.708466] Bridge firewalling registered
[ 17.887724] ppdev: user-space parallel port driver
[ 21.570861] r8169: eth0: link down
[ 21.571984] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.572545] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[ 21.649725] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.096789] wlan0: authenticate with AP 00:24:fe:09:94:18
[ 34.098873] wlan0: authenticated
[ 34.098877] wlan0: associate with AP 00:24:fe:09:94:18
[ 34.101687] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=1)
[ 34.101693] wlan0: associated
[ 34.103193] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 44.554145] wlan0: no IPv6 routers present

Attachment: signature.asc
Description: OpenPGP digital signature

Next message: Ingo Molnar: "Re: [PATCH] kmemleak: Ignore the aperture memory hole on x86_64"
Previous message: Daniel J Blueman: "[2.6.31-rc6] ACPI region conflict regression..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]