Re: [PATCH v2] [ARM] Kirkwood: Marvell OpenRD-Base board supportadded to v2.6.31-rc5

[Simon Kagstrom]

Hi Dhaval!

On Mon, 10 Aug 2009 17:37:34 +0530
Dhaval Vasa <dhaval.vasa@xxxxxxxxxxxxxx> wrote:

> reference:
> http://open-rd.org
> http://code.google.com/p/openrd
> 
> This patch is tested for:
> 1. Boot from DRAM/NAND flash
> 2. NAND read/write/erase
> 3. GbE0
> 4. USB read/write
> 
> FIXME:
> 1. SD/UART1 selection
> 2. MPP configuration (currently, default)
> 3. PEX
> 
> Signed-off-by: Dhaval Vasa <dhaval.vasa@xxxxxxxxxxxxxx>

Tested-by: Simon Kagstrom <simon.kagstrom@xxxxxxxxxxxxxx>

> +static unsigned int openrd_base_mpp_config[] __initdata = {
> +	MPP29_GPIO,	
                   ^^^^^
There is trailing whitespace on this line

Also, I'd suggest merging "[PATCH v2] Kirkwood: Initialise SATA for
OpenRD-Base" into this one and resubmit it.

In my patch, I also called kirkwood_i2c_init (see below), which at
least make the I2C bus appear (not that I've tested it very much).

// Simon

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index f9a2166..dc0a2fe 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -71,6 +71,8 @@ static void __init openrd_base_init(void)
        kirkwood_ge00_init(&openrd_base_ge00_data);
        kirkwood_sata_init(&openrd_base_sata_data);
        kirkwood_sdio_init(&openrd_base_mvsdio_data);
+
+       kirkwood_i2c_init();
 }
 
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/