Re: MD/RAID time out writing superblock

[Chris Webb]

Chris Webb <chris@xxxxxxxxxxxx> writes:

> I have a bitmap on the array, but sometimes when I remove and re-add a
> failed component, it doesn't seem to use the bitmap and does a lengthy full
> recovery instead. One example that's ongoing at the moment:-
> 
>       [=>...................]  recovery =  5.7% (40219648/703205312) finish=7546.3min speed=1463K/sec
>       bitmap: 34/126 pages [136KB], 8192KB chunk
> 
> which is rather painful and has to be throttled back with speed_limit_max to
> avoid the virtual machines running on top of it from having extremely poor IO
> latency.

I've also noticed that during this recovery, I'm seeing lots of timeouts but
they don't seem to interrupt the resync:

  05:47:39 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
  05:47:39 ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
  05:47:39         res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
  05:47:39 ata5.00: status: { DRDY }
  05:47:39 ata5: hard resetting link
  05:47:49 ata5: softreset failed (device not ready)
  05:47:49 ata5: hard resetting link
  05:47:49 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  05:47:49 ata5.00: configured for UDMA/133
  05:47:49 ata5: EH complete
  
  08:17:39 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
  08:17:39 ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
  08:17:39         res 40/00:00:35:83:f8/00:00:4d:00:00/40 Emask 0x4 (timeout)
  08:17:39 ata5.00: status: { DRDY }
  08:17:39 ata5: hard resetting link
  08:17:49 ata5: softreset failed (device not ready)
  08:17:49 ata5: hard resetting link
  08:17:49 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  08:17:49 ata5.00: configured for UDMA/133
  08:17:49 ata5: EH complete
  
  10:22:39 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
  10:22:39 ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
  10:22:39         res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
  10:22:39 ata5.00: status: { DRDY }
  10:22:39 ata5: hard resetting link
  10:22:49 ata5: softreset failed (device not ready)
  10:22:49 ata5: hard resetting link
  10:22:50 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  10:22:51 ata5.00: configured for UDMA/133
  10:22:51 ata5: EH complete

Cheers,

Chris.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/