Re: [PATCH] Haptic class support (v2)

[Pavel Machek]

On Mon 2009-10-12 09:32:28, Kyungmin Park wrote:
> On Sun, Oct 11, 2009 at 6:05 PM, Pavel Machek <pavel@xxxxxx> wrote:
> > On Tue 2009-10-06 16:45:33, Kyungmin Park wrote:
> >> This patch includes two haptic devices, isa1000 and isa1200
> >> ISA1000 is gpio based haptic, but isa1200 is based on I2C
> >> Both are working on Samsung SoCs and tested.
> >>
> >> To enable the haptic, echo 1 > /sys/class/haptic/${name}/enable
> >> You can adjust the level by echo ${level} > /sys/class/haptic/${name}/enable
> >> or
> >> With oneshot feature, echo ${msec time} > /sys/class/haptic/${name}/oneshot
> >
> > New device classes should certainly be documented in Documentation/.
> >
> > For example... is level 0-100?
> 
> Basically. range from 0 to 255. also each device can set max level in
> case of isa1000 it's 6.

How will userspace know the range?

> >  Is it valid to change level while 'oneshot' is running?
> 
> we usually use it under 1 sec. but I think it's possible to change it
> but not tried.

You are specifying interface here. You have to decide if it is valid
or not, then document it.

> >  Does oneshot use last level set?
> 
> Right. it used last set value.
> 
> If you don't mind to update these at Documentation please wait until
> commit first patches merged.

I'd expect your reply to be merged into the Documentation, and that to
be merged with the rest of the patches...
								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/