2.6.32-rc5: bluetooth still broken

From: Pavel Machek
Date: Fri Oct 30 2009 - 02:16:54 EST


Hi!

Today I got this... IIRC I was told it was fixed already...?

Pavel

ehci_hcd 0000:00:1d.7: suspend root hub
EXT3 FS on sda4, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-1.ucode
iwl3945 0000:03:00.0: Loaded firmware iwlwifi-3945-1.ucode, which is deprecated. Please use API v2 instead.
iwl3945 0000:03:00.0: Firmware has old API version. Expected 2, got 1. New firmware can be obtained from http://www.intellinuxwireless.org.
iwl3945 0000:03:00.0: loaded firmware version 15.28.1.8
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
coda_read_super: Bad mount data
coda_read_super: device index: 0
coda_read_super: rootfid is (01234567.ffffffff.08051b10.00000000)
coda: Unexpected interruption.
Failure of coda_cnode_make for root: error -4
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
Pid: 30385, comm: ps Not tainted 2.6.32-rc5-00154-gfbad3ad-dirty #83
Call Trace:
[<c0791da9>] ? printk+0x18/0x1a
[<c0255492>] __lock_acquire+0x4a2/0xad0
[<c0255b28>] lock_acquire+0x68/0x90
[<c06733bd>] ? skb_dequeue+0x1d/0x70
[<c0794e0b>] _spin_lock_irqsave+0x3b/0x50
[<c06733bd>] ? skb_dequeue+0x1d/0x70
[<c06733bd>] skb_dequeue+0x1d/0x70
[<c0674034>] skb_queue_purge+0x14/0x20
[<c07139a7>] l2cap_recv_frame+0x5d7/0x3270
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c06732c9>] ? skb_queue_tail+0x39/0x50
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c050cd50>] ? usb_submit_urb+0x140/0x360
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c07167d2>] l2cap_recv_acldata+0x192/0x3d0
[<c07079b8>] ? hci_rx_task+0x268/0x440
[<c0716640>] ? l2cap_recv_acldata+0x0/0x3d0
[<c07079e5>] hci_rx_task+0x295/0x440
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c0235b30>] tasklet_action+0x50/0xb0
[<c0236275>] __do_softirq+0x85/0x110
[<c023632d>] do_softirq+0x2d/0x40
[<c0236495>] irq_exit+0x65/0x80
[<c0204bbf>] do_IRQ+0x4f/0xc0
[<c02034a9>] common_interrupt+0x29/0x30
[<c0794a2f>] ? _write_unlock_irq+0x1f/0x30
[<c023474f>] do_exit+0x3df/0x650
[<c021bdc2>] ? do_page_fault+0x152/0x240
[<c02349f3>] do_group_exit+0x33/0x90
[<c0234a63>] sys_exit_group+0x13/0x20
[<c0202e50>] sysenter_do_call+0x12/0x31
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:02:00.0: eth0: 10/100 speed: disabling TSO
hci_acl_tx_to: hci0 ACL tx timeout
hci_acl_tx_to: hci0 killing stalled ACL connection 80:09:6E:BA:21:00

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/