[PATCH 06/16] trivial: fix assorted "access" typos

From: Andrà Goddard Rosa
Date: Fri Oct 30 2009 - 04:42:26 EST


Signed-off-by: André Goddard Rosa <andre.goddard@xxxxxxxxx>

diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index deab51d..4884cb3 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -538,7 +538,7 @@ SPI MESSAGE QUEUE
The bulk of the driver will be managing the I/O queue fed by transfer().

That queue could be purely conceptual. For example, a driver used only
-for low-frequency sensor acess might be fine using synchronous PIO.
+for low-frequency sensor access might be fine using synchronous PIO.

But the queue will probably be very real, using message->queue, PIO,
often DMA (especially if the root filesystem is in SPI flash), and
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 4a7cdd9..380df1a 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
- * when it acesses user-memory. When it fails in one
+ * when it accesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index dd43114..da110bd 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = {
};

/* ======================================================================== */
-/* PCI configuration acess */
+/* PCI configuration access */
/* ======================================================================== */

static int
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 9d66848..278441f 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -12,9 +12,9 @@
#include <linux/types.h>

/*
- * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * FIXME: Accessing the desc_struct through its fields is more elegant,
* and should be the one valid thing to do. However, a lot of open code
- * still touches the a and b acessors, and doing this allow us to do it
+ * still touches the a and b accessors, and doing this allow us to do it
* incrementally. We keep the signature as a struct, rather than an union,
* so we can get rid of it transparently in the future -- glommer
*/
diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c
b/drivers/infiniband/hw/ipath/ipath_sd7220.c
index aa47eb5..cdd0b32 100644
--- a/drivers/infiniband/hw/ipath/ipath_sd7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c
@@ -614,7 +614,7 @@ static int epb_trans(struct ipath_devdata *dd, u16
reg, u64 i_val, u64 *o_vp)
* @wd: Write Data - value to set in register
* @mask: ones where data should be spliced into reg.
*
- * Basic register read/modify/write, with un-needed acesses elided. That is,
+ * Basic register read/modify/write, with un-needed accesses elided. That is,
* a mask of zero will prevent write, while a mask of 0xFF will prevent read.
* returns current (presumed, if a write was done) contents of selected
* register, or <0 if errors.
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 61c083a..b7ce406 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -282,7 +282,7 @@ static s32 e1000_init_mac_params_82571(struct
e1000_adapter *adapter)

/*
* Ensure that the inter-port SWSM.SMBI lock bit is clear before
- * first NVM or PHY acess. This should be done for single-port
+ * first NVM or PHY access. This should be done for single-port
* devices, and for one port only on dual-port devices so that
* for those devices we can still use the SMBI lock to synchronize
* inter-port accesses to the PHY & NVM.
diff --git a/drivers/platform/x86/thinkpad_acpi.c
b/drivers/platform/x86/thinkpad_acpi.c
index b408189..7e7da18 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6535,7 +6535,7 @@ static struct ibm_struct volume_driver_data = {
* The speeds are stored on handles
* (FANA:FAN9), (FANC:FANB), (FANE:FAND).
*
- * There are three default speed sets, acessible as handles:
+ * There are three default speed sets, accessible as handles:
* FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
*
* ACPI DSDT switches which set is in use depending on various
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index f5a9add..07ce9bf 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id)
unsigned long flags;
int handled = 0;

- /* Use the host lock to serialise acess to the 53c700
+ /* Use the host lock to serialise access to the 53c700
* hardware. Note: In future, we may need to take the queue
* lock to enter the done routines. When that happens, we
* need to ensure that for this driver, the host lock and the
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
index 570b0d9..f6e77f1 100644
--- a/drivers/serial/pmac_zilog.h
+++ b/drivers/serial/pmac_zilog.h
@@ -73,7 +73,7 @@ static inline struct uart_pmac_port
*pmz_get_port_A(struct uart_pmac_port *uap)
}

/*
- * Register acessors. Note that we don't need to enforce a recovery
+ * Register accessors. Note that we don't need to enforce a recovery
* delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
* though if we try to use this driver on older machines, we might have
* to add it back
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 9df9242..30e49f3 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1958,7 +1958,7 @@ static void uea_dispatch_cmv_e1(struct uea_softc
*sc, struct intr_pkt *intr)
goto bad1;

/* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
- * the first MEMACESS cmv. Ignore it...
+ * the first MEMACCESS cmv. Ignore it...
*/
if (cmv->bFunction != dsc->function) {
if (UEA_CHIP_VERSION(sc) == ADI930
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 5e24925..3b861eb 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -917,8 +917,8 @@ undo_setattr:
/*
* If dentry->d_inode is null (usually meaning the cached dentry
* is a negative dentry) then we would attempt a standard SMB delete, but
- * if that fails we can not attempt the fall back mechanisms on EACESS
- * but will return the EACESS to the caller. Note that the VFS does not call
+ * if that fails we can not attempt the fall back mechanisms on EACCESS
+ * but will return the EACCESS to the caller. Note that the VFS does not call
* unlink on negative dentries currently.
*/
int cifs_unlink(struct inode *dir, struct dentry *dentry)
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
index e5124ce..3402042 100644
--- a/include/linux/mfd/ezx-pcap.h
+++ b/include/linux/mfd/ezx-pcap.h
@@ -45,7 +45,7 @@ void pcap_set_ts_bits(struct pcap_chip *, u32);
#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff
#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff

-/* registers acessible by both pcap ports */
+/* registers accessible by both pcap ports */
#define PCAP_REG_ISR 0x0 /* Interrupt Status */
#define PCAP_REG_MSR 0x1 /* Interrupt Mask */
#define PCAP_REG_PSTAT 0x2 /* Processor Status */
@@ -67,7 +67,7 @@ void pcap_set_ts_bits(struct pcap_chip *, u32);
#define PCAP_REG_VENDOR_TEST1 0x1e
#define PCAP_REG_VENDOR_TEST2 0x1f

-/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
+/* registers accessible by pcap port 1 only (a1200, e2 & e6) */
#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */
#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */
#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */
--
1.6.5.2.101.gcd0f8
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/