[PATCH 12/12] AppArmor: Enable configuring and building of the AppArmor security module
From: John Johansen
Date: Tue Nov 03 2009 - 18:50:57 EST
Kconfig and Makefiles to enable configuration and building of AppArmor.
Signed-off-by: John Johansen <john.johansen@xxxxxxxxxxxxx>
---
security/Kconfig | 1 +
security/Makefile | 2 +
security/apparmor/.gitignore | 5 +++
security/apparmor/Kconfig | 62 ++++++++++++++++++++++++++++++++++++++++++
security/apparmor/Makefile | 25 +++++++++++++++++
5 files changed, 95 insertions(+), 0 deletions(-)
create mode 100644 security/apparmor/.gitignore
create mode 100644 security/apparmor/Kconfig
create mode 100644 security/apparmor/Makefile
diff --git a/security/Kconfig b/security/Kconfig
index fb363cd..2f5fb0f 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -162,6 +162,7 @@ config LSM_MMAP_MIN_ADDR
source security/selinux/Kconfig
source security/smack/Kconfig
source security/tomoyo/Kconfig
+source security/apparmor/Kconfig
source security/integrity/ima/Kconfig
diff --git a/security/Makefile b/security/Makefile
index 95ecc06..8bcd805 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_KEYS) += keys/
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
subdir-$(CONFIG_SECURITY_SMACK) += smack
subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo
+subdir-$(CONFIG_SECURITY_APPARMOR) += apparmor
# always enable default capabilities
obj-y += commoncap.o min_addr.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o
obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o
obj-$(CONFIG_AUDIT) += lsm_audit.o
obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o
+obj-$(CONFIG_SECURITY_APPARMOR) += apparmor/built-in.o
obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o
obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o
diff --git a/security/apparmor/.gitignore b/security/apparmor/.gitignore
new file mode 100644
index 0000000..0a0a99f
--- /dev/null
+++ b/security/apparmor/.gitignore
@@ -0,0 +1,5 @@
+#
+# Generated include files
+#
+af_names.h
+capability_names.h
diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
new file mode 100644
index 0000000..01c8754
--- /dev/null
+++ b/security/apparmor/Kconfig
@@ -0,0 +1,62 @@
+config SECURITY_APPARMOR
+ bool "AppArmor support"
+ depends on SECURITY && SECURITY_NETWORK && NET && INET
+ select AUDIT
+ select SECURITY_PATH
+ select SECURITYFS
+ default n
+ help
+ This enables the AppArmor security module.
+ Required userspace tools (if they are not included in your
+ distribution) and further information may be found at
+ <http://forge.novell.com/modules/xfmod/project/?apparmor>
+
+ If you are unsure how to answer this question, answer N.
+
+config SECURITY_APPARMOR_NETWORK
+ bool "AppArmor network support"
+ depends on SECURITY_APPARMOR
+ default n
+ help
+ This enables AppArmor to mediate applications network use.
+ This will enable the SECURITY_NETWORK hooks.
+
+config SECURITY_APPARMOR_BOOTPARAM_VALUE
+ int "AppArmor boot parameter default value"
+ depends on SECURITY_APPARMOR
+ range 0 1
+ default 1
+ help
+ This option sets the default value for the kernel parameter
+ 'apparmor', which allows AppArmor to be enabled or disabled
+ at boot. If this option is set to 0 (zero), the AppArmor
+ kernel parameter will default to 0, disabling AppArmor at
+ bootup. If this option is set to 1 (one), the AppArmor
+ kernel parameter will default to 1, enabling AppArmor at
+ bootup.
+
+ If you are unsure how to answer this question, answer 1.
+
+config SECURITY_APPARMOR_DISABLE
+ bool "AppArmor runtime disable"
+ depends on SECURITY_APPARMOR
+ default n
+ help
+ This option enables writing to a apparmorfs node 'disable', which
+ allows AppArmor to be disabled at runtime prior to the policy load.
+ AppArmor will then remain disabled until the next boot.
+ This option is similar to the apparmor.enabled=0 boot parameter,
+ but is to support runtime disabling of AppArmor, e.g. from
+ /sbin/init, for portability across platforms where boot
+ parameters are difficult to employ.
+
+ If you are unsure how to answer this question, answer N.
+
+config SECURITY_APPARMOR_COMPAT_24
+ bool "Enable AppArmor 2.4 compatability"
+ depends on SECURITY_APPARMOR
+ default y
+ help
+ This option enables compatability with AppArmor 2.4. It is
+ recommended if compatability with older versions of AppArmor
+ is desired.
diff --git a/security/apparmor/Makefile b/security/apparmor/Makefile
new file mode 100644
index 0000000..02d7f3c
--- /dev/null
+++ b/security/apparmor/Makefile
@@ -0,0 +1,25 @@
+# Makefile for AppArmor Linux Security Module
+#
+obj-$(CONFIG_SECURITY_APPARMOR) += apparmor.o
+
+apparmor-y := apparmorfs.o audit.o capability.o context.o ipc.o lib.o match.o \
+ path.o domain.o policy.o policy_unpack.o procattr.o lsm.o \
+ resource.o sid.o file.o
+
+apparmor-$(CONFIG_SECURITY_APPARMOR_NETWORK) += net.o
+apparmor-$(CONFIG_SECURITY_APPARMOR_COMPAT_24) += apparmorfs-24.o
+
+clean-files: capability_names.h af_names.h
+
+quiet_cmd_make-caps = GEN $@
+cmd_make-caps = echo "static const char *capability_names[] = {" > $@ ; sed -n -e "/CAP_FS_MASK/d" -e "s/^\#define[ \\t]\\+CAP_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\$$/[\\2] = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@
+
+quiet_cmd_make-af = GEN $@
+cmd_make-af = echo "static const char *address_family_names[] = {" > $@ ; sed -n -e "/AF_MAX/d" -e "/AF_LOCAL/d" -e "s/^\#define[ \\t]\\+AF_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\\(.*\\)\$$/[\\2] = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@
+
+$(obj)/capability.o : $(obj)/capability_names.h
+$(obj)/net.o : $(obj)/af_names.h
+$(obj)/capability_names.h : $(srctree)/include/linux/capability.h
+ $(call cmd,make-caps)
+$(obj)/af_names.h : $(srctree)/include/linux/socket.h
+ $(call cmd,make-af)
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/