[PATCH 39/41] rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h

[Bartlomiej Zolnierkiewicz]

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/net/wireless/rt2x00/rt2x00.h    |    9 +++++++++
 drivers/net/wireless/rt2x00/rt2x00pci.h |    9 ---------
 drivers/net/wireless/rt2x00/rt2x00usb.h |    6 ------
 3 files changed, 9 insertions(+), 15 deletions(-)

Index: b/drivers/net/wireless/rt2x00/rt2x00.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -857,6 +857,15 @@ struct rt2x00_dev {
 };
 
 /*
+ * Register defines.
+ * Some registers require multiple attempts before success,
+ * in those cases REGISTER_BUSY_COUNT attempts should be
+ * taken with a REGISTER_BUSY_DELAY interval.
+ */
+#define REGISTER_BUSY_COUNT	5
+#define REGISTER_BUSY_DELAY	100
+
+/*
  * Generic RF access.
  * The RF is being accessed by word index.
  */
Index: b/drivers/net/wireless/rt2x00/rt2x00pci.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -35,15 +35,6 @@
 #define PCI_DEVICE_DATA(__ops)	.driver_data = (kernel_ulong_t)(__ops)
 
 /*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
- */
-#define REGISTER_BUSY_COUNT	5
-#define REGISTER_BUSY_DELAY	100
-
-/*
  * Register access.
  */
 static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
Index: b/drivers/net/wireless/rt2x00/rt2x00usb.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -39,17 +39,11 @@
 #define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
 
 /*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
  * For USB vendor requests we need to pass a timeout
  * time in ms, for this we use the REGISTER_TIMEOUT,
  * however when loading firmware a higher value is
  * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
  */
-#define REGISTER_BUSY_COUNT		5
-#define REGISTER_BUSY_DELAY		100
 #define REGISTER_TIMEOUT		500
 #define REGISTER_TIMEOUT_FIRMWARE	1000
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/