Re: [Bug #14626] oops on boot starting udev

From: Soeren Sonnenburg
Date: Sat Nov 21 2009 - 03:57:08 EST

Next message: Oliver Neukum: "Re: [PATCH v4] [RFC] NEXIO (or iNexio) support for usbtouchscreen"
Previous message: Yinghai Lu: "x86 related patches 11-21-2009"
In reply to: Soeren Sonnenburg: "Re: [Bug #14626] oops on boot starting udev"
Next in thread: Justin P. Mattock: "Re: [Bug #14626] oops on boot starting udev"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 2009-11-18 at 18:59 -0800, Dmitry Torokhov wrote:
> On Tue, Nov 17, 2009 at 05:06:47AM +0100, Soeren Sonnenburg wrote:
> > On Mon, 2009-11-16 at 20:01 -0800, Dmitry Torokhov wrote:
> > > On Tue, Nov 17, 2009 at 03:59:03AM +0100, Soeren Sonnenburg wrote:
> > > > On Mon, 2009-11-16 at 18:04 -0800, Dmitry Torokhov wrote:
> > > > > On Mon, Nov 16, 2009 at 05:14:55PM -0800, Greg KH wrote:
> > > > > > On Mon, Nov 16, 2009 at 11:37:48PM +0100, Rafael J. Wysocki wrote:
> > > > > > > This message has been generated automatically as a part of a report
> > > > > > > of recent regressions.
> > > > > > >
> > > > > > > The following bug entry is on the current list of known regressions
> > > > > > > from 2.6.31. Please verify if it still should be listed and let me know
> > > > > > > (either way).
> > > > > > >
> > > > > > >
> > > > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14626
> > > > > > > Subject : oops on boot starting udev
> > > > > > > Submitter : Soeren Sonnenburg <sonne@xxxxxxxxxx>
> > > > > > > Date : 2009-11-14 10:16 (3 days old)
> > > > > > > References : http://marc.info/?l=linux-kernel&m=125819380206800&w=4
> > > > > >
> > > > > > This looks like an input core problem, as the evdev module was just
> > > > > > loaded and died.
> > > > > >
> > > > > > Any input developers have any ideas?
> > > > > >
> > > > >
> > > > >
> > > > > Hmm, evdev does:
> > > > >
> > > > > dev_set_name(&evdev->dev, "event%d", minor);
> > > > >
> > > > > Not sure how it can go wrong...
> > > >
> > > > Anything I should/could do to narrow it down a bit (apart from
> > > > bisecting?).
> > > >
> > >
> > > Umm, I looked through the changes between -rc6 and 7 but nothing jumped
> > > out at me... You don't happen to have any local changes in your tree?
> >
> > Well only the mouse button #1 emulation - though I don't see what could
> > go wrong there.
> >
>
> I have been looking through the changes and I really don't see anything
> suspicious. I am also not hittign this oops on any of my boxes. Any
> chance you could bisect?
>
> Thanks.

Alright so I tried to do a bisect when I noticed that building a knwon
to work -rc5 did no longer work either. Thought it might be a gcc
problem (gcc-4.3 here) so upgraded to 4.4 - same thing.
Then I recognized that it crashes on loading basically *any* module,
tried tun and applesmc. Attaching the crashes...

I am starting to run out of ideas...

Soeren
--
For the one fact about the future of which we can be certain is that it
will be utterly fantastic. -- Arthur C. Clarke, 1962
[ 0.000000] Linux version 2.6.32-rc3-debug (sonne@no) (gcc version 4.4.2 (Debian 4.4.2-3) ) #24 SMP PREEMPT Sat Nov 21 09:23:52 CET 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-debug root=/dev/sda3 ro usbcore.autosuspend=1 init=/bin/bash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae72b000 (usable)
[ 0.000000] BIOS-e820: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae92c000 - 00000000bf097000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf097000 - 00000000bf099000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf099000 - 00000000bf09b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf09b000 - 00000000bf09d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf09d000 - 00000000bfeb7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeb7000 - 00000000bfec6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfec6000 - 00000000bfecd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfed6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfed6000 - 00000000bfed7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfed7000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e7400000 - 00000000e7401000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 4, base: 3071MB, range: 1MB, type UC
[ 0.000000] total RAM coverred: 4095M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xae72b max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000ae72b000 (usable)
[ 0.000000] modified: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS)
[ 0.000000] modified: 00000000ae92c000 - 00000000bf097000 (ACPI data)
[ 0.000000] modified: 00000000bf097000 - 00000000bf099000 (ACPI NVS)
[ 0.000000] modified: 00000000bf099000 - 00000000bf09b000 (ACPI data)
[ 0.000000] modified: 00000000bf09b000 - 00000000bf09d000 (ACPI NVS)
[ 0.000000] modified: 00000000bf09d000 - 00000000bfeb7000 (ACPI data)
[ 0.000000] modified: 00000000bfeb7000 - 00000000bfec6000 (ACPI NVS)
[ 0.000000] modified: 00000000bfec6000 - 00000000bfecd000 (ACPI data)
[ 0.000000] modified: 00000000bfecd000 - 00000000bfed6000 (ACPI NVS)
[ 0.000000] modified: 00000000bfed6000 - 00000000bfed7000 (ACPI data)
[ 0.000000] modified: 00000000bfed7000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] modified: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] modified: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000e7400000 - 00000000e7401000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000ae72b000
[ 0.000000] 0000000000 - 00ae600000 page 2M
[ 0.000000] 00ae600000 - 00ae72b000 page 4k
[ 0.000000] kernel direct mapping tables up to ae72b000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bfeee1c0 0007C (v01 APPLE Apple00 000000AC 01000013)
[ 0.000000] ACPI: FACP 00000000bfeec000 000F4 (v04 APPLE Apple00 000000AC Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bfec6000 06238 (v01 APPLE MacBookP 00050003 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfecd000 00040
[ 0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfee9000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 00000000bfee8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bfee7000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bfee6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bfee5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bfee1000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfee4000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfee3000 0009F (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000183acac] TEXT DATA BSS ==> [0001000000 - 000183acac]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [000183b000 - 000183b201] BRK ==> [000183b000 - 000183b201]
[ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ae72b
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 976581
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 696163 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ae72b000 - 00000000ae92c000
[ 0.000000] PM: Registered nosave memory: 00000000ae92c000 - 00000000bf097000
[ 0.000000] PM: Registered nosave memory: 00000000bf097000 - 00000000bf099000
[ 0.000000] PM: Registered nosave memory: 00000000bf099000 - 00000000bf09b000
[ 0.000000] PM: Registered nosave memory: 00000000bf09b000 - 00000000bf09d000
[ 0.000000] PM: Registered nosave memory: 00000000bf09d000 - 00000000bfeb7000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb7000 - 00000000bfec6000
[ 0.000000] PM: Registered nosave memory: 00000000bfec6000 - 00000000bfecd000
[ 0.000000] PM: Registered nosave memory: 00000000bfecd000 - 00000000bfed6000
[ 0.000000] PM: Registered nosave memory: 00000000bfed6000 - 00000000bfed7000
[ 0.000000] PM: Registered nosave memory: 00000000bfed7000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfef9000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e7400000
[ 0.000000] PM: Registered nosave memory: 00000000e7400000 - 00000000e7401000
[ 0.000000] PM: Registered nosave memory: 00000000e7401000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:27500000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s84056 r8192 d22440 u1048576
[ 0.000000] pcpu-alloc: s84056 r8192 d22440 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 958558
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-debug root=/dev/sda3 ro usbcore.autosuspend=1 init=/bin/bash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3769132k/5242880k available (4714k kernel code, 1336556k absent, 136292k reserved, 2553k data, 468k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 2 loops
[ 0.000000] Detected 3051.339 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6105.95 BogoMIPS (lpj=10171130)
[ 0.010423] Mount-cache hash table entries: 256
[ 0.010730] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.013530] CPU: L2 cache: 6144K
[ 0.013728] CPU: Physical Processor ID: 0
[ 0.013926] CPU: Processor Core ID: 0
[ 0.014123] mce: CPU supports 6 MCE banks
[ 0.014325] CPU0: Thermal monitoring enabled (TM2)
[ 0.014526] using mwait in idle threads.
[ 0.014697] Performance Events: Core2 events, Intel PMU driver.
[ 0.015178] ... version: 2
[ 0.015355] ... bit width: 40
[ 0.015553] ... generic registers: 2
[ 0.015750] ... value mask: 000000ffffffffff
[ 0.016145] ... max period: 000000007fffffff
[ 0.016312] ... fixed-purpose events: 3
[ 0.016488] ... event mask: 0000000700000003
[ 0.016681] ACPI: Core revision 20090903
[ 0.026145] Setting APIC routing to flat
[ 0.026666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060140] CPU0: Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06GHz stepping 0a
[ 0.063333] Booting processor 1 APIC 0x1 ip 0x6000
[ 5.106224] Not responding.
[ 5.106479] Brought up 1 CPUs
[ 5.106660] Total of 1 processors activated (6105.95 BogoMIPS).
[ 5.106934] CPU0 attaching NULL sched-domain.
[ 5.110168] Apple MacBookPro5 series board detected. Selecting PCI-method for reboots.
[ 5.110637] regulator: core version 0.5
[ 5.110918] NET: Registered protocol family 16
[ 5.111399] ACPI: bus type pci registered
[ 5.111907] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 5.112116] PCI: MCFG area at f0000000 reserved in E820
[ 5.112335] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 5.114513] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 5.114729] PCI: Using configuration type 1 for base access
[ 5.120000] bio: create slab <bio-0> at 0
[ 5.124088] ACPI: EC: EC description table is found, configuring boot EC
[ 5.125010] ACPI: BIOS _OSI(Linux) query ignored
[ 5.127102] ACPI: Interpreter enabled
[ 5.127325] ACPI: (supports S0 S3 S4 S5)
[ 5.128108] ACPI: Using IOAPIC for interrupt routing
[ 5.143791] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 5.144319] ACPI: No dock devices found.
[ 5.144757] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 5.146674] pci 0000:00:03.0: reg 10 io port: [0x3000-0x30ff]
[ 5.146812] pci 0000:00:03.2: reg 10 io port: [0x3180-0x31bf]
[ 5.146829] pci 0000:00:03.2: reg 20 io port: [0x3140-0x317f]
[ 5.146835] pci 0000:00:03.2: reg 24 io port: [0x3100-0x313f]
[ 5.146865] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 5.147100] pci 0000:00:03.2: PME# disabled
[ 5.147555] pci 0000:00:03.5: reg 10 32bit mmio: [0xe7400000-0xe747ffff]
[ 5.147687] pci 0000:00:04.0: reg 10 32bit mmio: [0xe7488000-0xe7488fff]
[ 5.160009] pci 0000:00:04.0: supports D1 D2
[ 5.160011] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.160240] pci 0000:00:04.0: PME# disabled
[ 5.160496] pci 0000:00:04.1: reg 10 32bit mmio: [0xe7489200-0xe74892ff]
[ 5.160552] pci 0000:00:04.1: supports D1 D2
[ 5.160554] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.160780] pci 0000:00:04.1: PME# disabled
[ 5.161046] pci 0000:00:06.0: reg 10 32bit mmio: [0xe7487000-0xe7487fff]
[ 5.161092] pci 0000:00:06.0: supports D1 D2
[ 5.161093] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.161325] pci 0000:00:06.0: PME# disabled
[ 5.161591] pci 0000:00:06.1: reg 10 32bit mmio: [0xe7489100-0xe74891ff]
[ 5.161648] pci 0000:00:06.1: supports D1 D2
[ 5.161649] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.161873] pci 0000:00:06.1: PME# disabled
[ 5.162136] pci 0000:00:08.0: reg 10 32bit mmio: [0xe7480000-0xe7483fff]
[ 5.162177] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 5.162392] pci 0000:00:08.0: PME# disabled
[ 5.162693] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe7486000-0xe7486fff]
[ 5.162698] pci 0000:00:0a.0: reg 14 io port: [0x31e0-0x31e7]
[ 5.162701] pci 0000:00:0a.0: reg 18 32bit mmio: [0xe7489000-0xe74890ff]
[ 5.162705] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xe7489300-0xe748930f]
[ 5.162736] pci 0000:00:0a.0: supports D1 D2
[ 5.162737] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.162963] pci 0000:00:0a.0: PME# disabled
[ 5.163220] pci 0000:00:0b.0: reg 10 io port: [0x31d8-0x31df]
[ 5.163224] pci 0000:00:0b.0: reg 14 io port: [0x31ec-0x31ef]
[ 5.163228] pci 0000:00:0b.0: reg 18 io port: [0x31d0-0x31d7]
[ 5.163232] pci 0000:00:0b.0: reg 1c io port: [0x31e8-0x31eb]
[ 5.163235] pci 0000:00:0b.0: reg 20 io port: [0x31c0-0x31cf]
[ 5.163239] pci 0000:00:0b.0: reg 24 32bit mmio: [0xe7484000-0xe7485fff]
[ 5.163573] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.163812] pci 0000:00:0c.0: PME# disabled
[ 5.164387] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.164616] pci 0000:00:15.0: PME# disabled
[ 5.165165] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.165402] pci 0000:00:16.0: PME# disabled
[ 5.165731] pci 0000:00:09.0: transparent bridge
[ 5.165942] pci 0000:00:09.0: bridge 32bit mmio: [0xe7300000-0xe73fffff]
[ 5.166112] pci 0000:02:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff]
[ 5.166176] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 5.166241] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe2000000-0xe3ffffff]
[ 5.166272] pci 0000:02:00.0: reg 24 io port: [0x2000-0x207f]
[ 5.166304] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xe5000000-0xe507ffff]
[ 5.166639] pci 0000:00:0c.0: bridge io port: [0x2000-0x2fff]
[ 5.166648] pci 0000:00:0c.0: bridge 32bit mmio: [0xe2000000-0xe50fffff]
[ 5.166671] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 5.166902] pci 0000:04:00.0: reg 10 64bit mmio: [0xe7200000-0xe7203fff]
[ 5.166983] pci 0000:04:00.0: supports D1 D2
[ 5.166984] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 5.167220] pci 0000:04:00.0: PME# disabled
[ 5.167544] pci 0000:00:15.0: bridge 32bit mmio: [0xe7200000-0xe72fffff]
[ 5.167631] pci 0000:05:00.0: reg 10 64bit mmio: [0xe7100000-0xe7100fff]
[ 5.167709] pci 0000:05:00.0: supports D1 D2
[ 5.167711] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.167941] pci 0000:05:00.0: PME# disabled
[ 5.168260] pci 0000:00:16.0: bridge 32bit mmio: [0xe7100000-0xe71fffff]
[ 5.168333] pci_bus 0000:00: on NUMA node 0
[ 5.168336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 5.215737] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 5.217555] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 5.219421] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 5.221269] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 5.223139] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11
[ 5.225211] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.227261] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.229387] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.231548] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.233722] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.235757] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.237822] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.240053] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.242184] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.244327] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.246477] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.248486] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[ 5.253505] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.255466] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.257583] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.259578] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
[ 5.261408] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.263432] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.265364] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.267215] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.269247] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.271278] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.273337] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.275360] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.277163] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.279201] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.281219] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.283205] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 5.285092] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 5.287031] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 5.288916] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[ 5.290818] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 5.292713] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.294656] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.296676] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 5.298517] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 5.300360] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 5.302165] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 5.303965] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 5.305800] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 5.306040] vgaarb: loaded
[ 5.306331] SCSI subsystem initialized
[ 5.310008] libata version 3.00 loaded.
[ 5.310058] usbcore: registered new interface driver usbfs
[ 5.310281] usbcore: registered new interface driver hub
[ 5.310458] usbcore: registered new device driver usb
[ 5.310772] PCI: Using ACPI for IRQ routing
[ 5.311355] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 5.312224] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 5.316678] Switching to clocksource tsc
[ 5.321165] Slow work thread pool: Starting up
[ 5.321362] Slow work thread pool: Ready
[ 5.321563] FS-Cache: Loaded
[ 5.321783] CacheFiles: Loaded
[ 5.321986] pnp: PnP ACPI init
[ 5.322186] ACPI: bus type pnp registered
[ 5.323323] Switched to high resolution mode on CPU 0
[ 5.329595] pnp: PnP ACPI: found 9 devices
[ 5.329794] ACPI: ACPI bus type pnp unregistered
[ 5.329995] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 5.333561] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 5.333766] system 00:06: ioport range 0x400-0x47f has been reserved
[ 5.333968] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 5.334141] system 00:06: ioport range 0x500-0x57f has been reserved
[ 5.334348] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 5.334551] system 00:06: ioport range 0x800-0x87f has been reserved
[ 5.334753] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 5.334954] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 5.335128] system 00:06: ioport range 0x295-0x296 has been reserved
[ 5.341267] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 5.341467] pci 0000:00:09.0: IO window: disabled
[ 5.341669] pci 0000:00:09.0: MEM window: 0xe7300000-0xe73fffff
[ 5.341849] pci 0000:00:09.0: PREFETCH window: disabled
[ 5.342045] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 5.342250] pci 0000:00:0c.0: IO window: 0x2000-0x2fff
[ 5.342457] pci 0000:00:0c.0: MEM window: 0xe2000000-0xe50fffff
[ 5.342663] pci 0000:00:0c.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 5.342936] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 5.343081] pci 0000:00:15.0: IO window: disabled
[ 5.343288] pci 0000:00:15.0: MEM window: 0xe7200000-0xe72fffff
[ 5.343480] pci 0000:00:15.0: PREFETCH window: disabled
[ 5.343656] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[ 5.343856] pci 0000:00:16.0: IO window: disabled
[ 5.344063] pci 0000:00:16.0: MEM window: 0xe7100000-0xe71fffff
[ 5.344269] pci 0000:00:16.0: PREFETCH window: disabled
[ 5.344476] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 5.344679] pci 0000:00:09.0: setting latency timer to 64
[ 5.344959] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23
[ 5.345144] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 5.345407] pci 0000:00:0c.0: setting latency timer to 64
[ 5.345681] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22
[ 5.345883] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 5.346146] pci 0000:00:15.0: setting latency timer to 64
[ 5.346416] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 5.346617] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 5.346866] pci 0000:00:16.0: setting latency timer to 64
[ 5.346871] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 5.346873] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 5.346874] pci_bus 0000:01: resource 1 mem: [0xe7300000-0xe73fffff]
[ 5.346876] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 5.346877] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 5.346879] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 5.346880] pci_bus 0000:02: resource 1 mem: [0xe2000000-0xe50fffff]
[ 5.346882] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 5.346883] pci_bus 0000:04: resource 1 mem: [0xe7200000-0xe72fffff]
[ 5.346885] pci_bus 0000:05: resource 1 mem: [0xe7100000-0xe71fffff]
[ 5.346903] NET: Registered protocol family 2
[ 5.347159] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 5.347927] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 5.349951] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 5.350644] TCP: Hash tables configured (established 262144 bind 65536)
[ 5.350846] TCP reno registered
[ 5.351107] NET: Registered protocol family 1
[ 5.351802] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 5.352026] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 5.352288] Scanning for low memory corruption every 60 seconds
[ 5.352596] Intel AES-NI instructions are not detected.
[ 5.356777] VFS: Disk quotas dquot_6.5.2
[ 5.357022] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.357707] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 5.357922] msgmni has been set to 7363
[ 5.360017] alg: No test for cipher_null (cipher_null-generic)
[ 5.360200] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 5.360405] alg: No test for digest_null (digest_null-generic)
[ 5.360590] alg: No test for compress_null (compress_null-generic)
[ 5.361246] alg: No test for fcrypt (fcrypt-generic)
[ 5.362630] alg: No test for stdrng (krng)
[ 5.366097] alg: No test for ghash (ghash-generic)
[ 5.366354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 5.366588] io scheduler noop registered
[ 5.366806] io scheduler cfq registered (default)
[ 5.367184] pci 0000:02:00.0: Boot video device
[ 5.367461] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 5.367480] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 5.367845] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X
[ 5.367863] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 5.368225] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
[ 5.368243] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 5.368690] ACPI: AC Adapter [ADP1] (on-line)
[ 5.368985] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 5.369293] ACPI: Lid Switch [LID0]
[ 5.369532] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 5.369794] ACPI: Power Button [PWRB]
[ 5.370043] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 5.370305] ACPI: Sleep Button [SLPB]
[ 5.370539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.370783] ACPI: Power Button [PWRF]
[ 5.371671] ACPI: SSDT 00000000bfec5a98 002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 5.372472] ACPI: SSDT 00000000bfec3c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 5.373362] Monitor-Mwait will be used to enter C-1 state
[ 5.376672] Monitor-Mwait will be used to enter C-2 state
[ 5.380005] Monitor-Mwait will be used to enter C-3 state
[ 5.380008] Marking TSC unstable due to TSC halts in idle
[ 5.380264] Switching to clocksource hpet
[ 5.380478] processor LNXCPU:00: registered as cooling_device0
[ 5.391200] Linux agpgart interface v0.103
[ 5.391435] [drm] Initialized drm 1.1.0 20060810
[ 5.393797] brd: module loaded
[ 5.395278] loop: module loaded
[ 5.395712] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 5.396403] ahci 0000:00:0b.0: version 3.0
[ 5.396691] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20
[ 5.396942] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20
[ 5.397277] ahci 0000:00:0b.0: irq 27 for MSI/MSI-X
[ 5.397310] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 5.397574] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
[ 5.397835] ahci 0000:00:0b.0: setting latency timer to 64
[ 5.397990] scsi0 : ahci
[ 5.398462] scsi1 : ahci
[ 5.398723] scsi2 : ahci
[ 5.399068] scsi3 : ahci
[ 5.399323] scsi4 : ahci
[ 5.399560] scsi5 : ahci
[ 5.399857] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 27
[ 5.400146] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 27
[ 5.400407] ata3: DUMMY
[ 5.400602] ata4: DUMMY
[ 5.400798] ata5: DUMMY
[ 5.400993] ata6: DUMMY
[ 5.401539] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.402063] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[ 5.402265] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
[ 5.402532] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 5.402534] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 5.402737] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 5.403016] ehci_hcd 0000:00:04.1: debug port 1
[ 5.403221] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 5.403231] ehci_hcd 0000:00:04.1: irq 19, io mem 0xe7489200
[ 5.413344] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 5.413566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.413767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.414023] usb usb1: Product: EHCI Host Controller
[ 5.414222] usb usb1: Manufacturer: Linux 2.6.32-rc3-debug ehci_hcd
[ 5.414401] usb usb1: SerialNumber: 0000:00:04.1
[ 5.414724] usb usb1: configuration #1 chosen from 1 choice
[ 5.415114] hub 1-0:1.0: USB hub found
[ 5.415316] hub 1-0:1.0: 7 ports detected
[ 5.415861] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
[ 5.416063] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18 (level, low) -> IRQ 18
[ 5.416320] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 5.416322] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 5.416523] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 5.416817] ehci_hcd 0000:00:06.1: debug port 1
[ 5.417022] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 5.417032] ehci_hcd 0000:00:06.1: irq 18, io mem 0xe7489100
[ 5.426753] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 5.427109] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.427310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.427567] usb usb2: Product: EHCI Host Controller
[ 5.427739] usb usb2: Manufacturer: Linux 2.6.32-rc3-debug ehci_hcd
[ 5.427928] usb usb2: SerialNumber: 0000:00:06.1
[ 5.428263] usb usb2: configuration #1 chosen from 1 choice
[ 5.428555] hub 2-0:1.0: USB hub found
[ 5.428778] hub 2-0:1.0: 5 ports detected
[ 5.429051] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.429524] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 5.429727] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[ 5.430054] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 5.430056] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 5.430258] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 5.430532] ohci_hcd 0000:00:04.0: irq 17, io mem 0xe7488000
[ 5.456453] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
[ 5.456994] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
[ 5.457536] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
[ 5.458057] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
[ 5.481312] ACPI: Battery Slot [BAT0] (battery present)
[ 5.485352] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.485553] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.485810] usb usb3: Product: OHCI Host Controller
[ 5.486010] usb usb3: Manufacturer: Linux 2.6.32-rc3-debug ohci_hcd
[ 5.486211] usb usb3: SerialNumber: 0000:00:04.0
[ 5.486511] usb usb3: configuration #1 chosen from 1 choice
[ 5.486916] hub 3-0:1.0: USB hub found
[ 5.487169] hub 3-0:1.0: 7 ports detected
[ 5.487666] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 16
[ 5.487864] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 16 (level, low) -> IRQ 16
[ 5.488132] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 5.488134] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 5.488336] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 5.491975] ohci_hcd 0000:00:06.0: irq 16, io mem 0xe7487000
[ 5.545355] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.545557] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.545774] usb usb4: Product: OHCI Host Controller
[ 5.545957] usb usb4: Manufacturer: Linux 2.6.32-rc3-debug ohci_hcd
[ 5.546158] usb usb4: SerialNumber: 0000:00:06.0
[ 5.546368] usb usb4: configuration #1 chosen from 1 choice
[ 5.546598] hub 4-0:1.0: USB hub found
[ 5.546814] hub 4-0:1.0: 5 ports detected
[ 5.547087] usbcore: registered new interface driver libusual
[ 5.547373] PNP: No PS/2 controller found. Probing ports directly.
[ 5.548432] i8042.c: No controller found.
[ 5.548705] mice: PS/2 mouse device common for all mice
[ 5.548964] i2c i2c-0: nForce2 SMBus adapter at 0x3140
[ 5.549171] i2c i2c-1: nForce2 SMBus adapter at 0x3100
[ 5.549550] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 5.549928] cpuidle: using governor ladder
[ 5.550279] cpuidle: using governor menu
[ 5.551082] usbcore: registered new interface driver hiddev
[ 5.551306] usbcore: registered new interface driver usbhid
[ 5.551505] usbhid: v2.6:USB HID core driver
[ 5.551899] TCP cubic registered
[ 5.552239] NET: Registered protocol family 10
[ 5.552721] lo: Disabled Privacy Extensions
[ 5.553088] Mobile IPv6
[ 5.553285] NET: Registered protocol family 17
[ 5.553496] NET: Registered protocol family 15
[ 5.554166] PM: Resume from disk failed.
[ 5.720042] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 5.850738] usb 1-4: New USB device found, idVendor=05ac, idProduct=8507
[ 5.850923] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.851127] usb 1-4: Product: Built-in iSight
[ 5.851329] usb 1-4: Manufacturer: Apple Inc.
[ 5.851530] usb 1-4: SerialNumber: 8H98400GG8DD3A1A
[ 5.851811] usb 1-4: configuration #1 chosen from 1 choice
[ 5.883375] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.883591] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.883970] ata1.00: ATA-8: APPLE SSD TS256A, AGAB0202, max UDMA/100
[ 5.884175] ata1.00: 490234752 sectors, multi 16: LBA48
[ 5.884582] ata1.00: configured for UDMA/100
[ 5.889248] ata2.00: ATAPI: HL-DT-ST DVDRW GS23N, SB00, max UDMA/133, ATAPI AN
[ 5.894697] ata2.00: configured for UDMA/133
[ 5.896803] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS256A AGAB PQ: 0 ANSI: 5
[ 5.897295] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 5.897608] sd 0:0:0:0: [sda] Write Protect is off
[ 5.897811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.897839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.898229] sda:
[ 5.898450] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.900172] sda1 sda2 sda3 sda4 sda5
[ 5.901493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.909738] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS23N SB00 PQ: 0 ANSI: 5
[ 5.921235] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 5.921442] Uniform CD-ROM driver Revision: 3.20
[ 5.921739] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.921838] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.924708] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.924909] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 5.925127] Freeing unused kernel memory: 468k freed
[ 5.925507] kjournald starting. Commit interval 5 seconds
[ 6.223376] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 6.352024] usb 2-5: New USB device found, idVendor=05ac, idProduct=8403
[ 6.352202] usb 2-5: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 6.352409] usb 2-5: Product: Card Reader
[ 6.352608] usb 2-5: Manufacturer: Apple
[ 6.352808] usb 2-5: SerialNumber: 000000009833
[ 6.353521] usb 2-5: configuration #1 chosen from 1 choice
[ 6.367222] Initializing USB Mass Storage driver...
[ 6.367512] scsi6 : SCSI emulation for USB Mass Storage devices
[ 6.367853] usb-storage: device found at 3
[ 6.367856] usb-storage: waiting for device to settle before scanning
[ 6.367870] usbcore: registered new interface driver usb-storage
[ 6.368064] USB Mass Storage support registered.
[ 6.633374] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 6.835384] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 6.835584] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.835756] usb 4-1: Product: BRCM2046 Hub
[ 6.835934] usb 4-1: Manufacturer: Apple Inc.
[ 6.836210] usb 4-1: configuration #1 chosen from 1 choice
[ 6.838430] hub 4-1:1.0: USB hub found
[ 6.841381] hub 4-1:1.0: 3 ports detected
[ 7.133374] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 7.328381] usb 3-5: New USB device found, idVendor=05ac, idProduct=8242
[ 7.328586] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.328770] usb 3-5: Product: IR Receiver
[ 7.328969] usb 3-5: Manufacturer: Apple Computer, Inc.
[ 7.329248] usb 3-5: configuration #1 chosen from 1 choice
[ 7.347510] apple 0003:05AC:8242.0001: hiddev96,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0
[ 7.626708] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 7.831382] usb 3-6: New USB device found, idVendor=05ac, idProduct=0237
[ 7.831586] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.831791] usb 3-6: Product: Apple Internal Keyboard / Trackpad
[ 7.831967] usb 3-6: Manufacturer: Apple Inc.
[ 7.832232] usb 3-6: configuration #1 chosen from 1 choice
[ 7.846097] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input5
[ 7.846409] apple 0003:05AC:0237.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0
[ 8.347429] apple 0003:05AC:0237.0003: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1
[ 8.421383] usb 4-1.1: new full speed USB device using ohci_hcd and address 3
[ 8.535383] usb 4-1.1: New USB device found, idVendor=05ac, idProduct=8217
[ 8.535585] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.535821] usb 4-1.1: Product: Bluetooth USB Host Controller
[ 8.535997] usb 4-1.1: Manufacturer: Apple Inc.
[ 8.536197] usb 4-1.1: SerialNumber: 002608DA9686
[ 8.536462] usb 4-1.1: configuration #1 chosen from 1 choice
[ 11.367163] usb-storage: device scan complete
[ 11.368541] scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
[ 11.369339] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.370777] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 37.837014] EXT3 FS on sda3, internal journal
[ 50.057853] applesmc: - Model accelerometer
[ 50.058039] applesmc: - Model light sensors and backlight
[ 50.058235] applesmc: - Model with 20 temperature sensors
[ 50.091594] applesmc: wait status failed: 5 != 0
[ 50.176418] applesmc: wait status failed: 5 != 0
[ 50.263085] applesmc: wait status failed: 5 != 0
[ 50.349750] applesmc: wait status failed: 5 != 0
[ 50.436416] applesmc: wait status failed: 5 != 0
[ 50.523083] applesmc: wait status failed: 5 != 0
[ 50.609751] applesmc: wait status failed: 5 != 0
[ 50.696417] applesmc: wait status failed: 5 != 0
[ 50.783083] applesmc: wait status failed: 5 != 0
[ 50.869750] applesmc: wait status failed: 5 != 0
[ 50.956417] applesmc: wait status failed: 5 != 0
[ 51.043083] applesmc: wait status failed: 5 != 0
[ 51.129751] applesmc: wait status failed: 5 != 0
[ 51.216417] applesmc: wait status failed: 5 != 0
[ 51.303083] applesmc: wait status failed: 5 != 0
[ 51.389753] applesmc: wait status failed: 5 != 0
[ 51.476416] applesmc: wait status failed: 5 != 0
[ 51.563084] applesmc: wait status failed: 5 != 0
[ 51.649751] applesmc: wait status failed: 5 != 0
[ 51.736416] applesmc: wait status failed: 5 != 0
[ 51.823083] applesmc: wait status failed: 5 != 0
[ 51.909751] applesmc: wait status failed: 5 != 0
[ 51.996417] applesmc: wait status failed: 5 != 0
[ 52.083084] applesmc: wait status failed: 5 != 0
[ 52.169749] applesmc: wait status failed: 5 != 0
[ 52.256416] applesmc: wait status failed: 5 != 0
[ 52.343083] applesmc: wait status failed: 5 != 0
[ 52.433084] applesmc: wait status failed: 5 != 0
[ 52.519751] applesmc: wait status failed: 5 != 0
[ 52.606416] applesmc: wait status failed: 5 != 0
[ 52.693083] applesmc: wait status failed: 5 != 0
[ 52.779750] applesmc: wait status failed: 5 != 0
[ 52.866417] applesmc: wait status failed: 5 != 0
[ 52.953215] applesmc: wait status failed: 5 != 0
[ 53.039749] applesmc: wait status failed: 5 != 0
[ 53.126416] applesmc: wait status failed: 5 != 0
[ 53.213084] applesmc: wait status failed: 5 != 0
[ 53.299750] applesmc: wait status failed: 5 != 0
[ 53.386420] applesmc: wait status failed: 5 != 0
[ 53.473083] applesmc: wait status failed: 5 != 0
[ 53.559750] applesmc: wait status failed: 5 != 0
[ 53.646416] applesmc: wait status failed: 5 != 0
[ 53.733200] applesmc: wait status failed: 5 != 0
[ 53.819749] applesmc: wait status failed: 5 != 0
[ 53.906416] applesmc: wait status failed: 5 != 0
[ 53.993083] applesmc: wait status failed: 5 != 0
[ 54.079750] applesmc: wait status failed: 5 != 0
[ 54.166417] applesmc: wait status failed: 5 != 0
[ 54.253082] applesmc: wait status failed: 5 != 0
[ 54.339749] applesmc: wait status failed: 5 != 0
[ 54.426417] applesmc: wait status failed: 5 != 0
[ 54.513083] applesmc: wait status failed: 5 != 0
[ 54.599750] applesmc: wait status failed: 5 != 0
[ 54.686395] applesmc: wait status failed: 5 != 0
[ 54.773082] applesmc: wait status failed: 5 != 0
[ 54.859749] applesmc: wait status failed: 5 != 0
[ 54.946416] applesmc: wait status failed: 5 != 0
[ 55.033083] applesmc: wait status failed: 5 != 0
[ 55.119750] applesmc: wait status failed: 5 != 0
[ 55.206417] applesmc: wait status failed: 5 != 0
[ 55.293082] applesmc: wait status failed: 5 != 0
[ 55.379823] applesmc: wait status failed: 5 != 0
[ 55.466417] applesmc: wait status failed: 5 != 0
[ 55.553083] applesmc: wait status failed: 5 != 0
[ 55.639750] applesmc: wait status failed: 5 != 0
[ 55.726415] applesmc: wait status failed: 5 != 0
[ 55.813082] applesmc: wait status failed: 5 != 0
[ 55.899749] applesmc: wait status failed: 5 != 0
[ 55.986416] applesmc: wait status failed: 5 != 0
[ 56.069386] applesmc: wait status failed: 5 != 0
[ 56.156415] applesmc: wait status failed: 5 != 0
[ 56.243213] applesmc: wait status failed: 5 != 0
[ 56.329749] applesmc: wait status failed: 5 != 0
[ 56.416419] applesmc: wait status failed: 5 != 0
[ 56.503083] applesmc: wait status failed: 5 != 0
[ 56.589750] applesmc: wait status failed: 5 != 0
[ 56.676415] applesmc: wait status failed: 5 != 0
[ 56.763082] applesmc: wait status failed: 5 != 0
[ 56.849750] applesmc: wait status failed: 5 != 0
[ 56.936416] applesmc: wait status failed: 5 != 0
[ 57.023083] applesmc: wait status failed: 5 != 0
[ 57.109748] applesmc: wait status failed: 5 != 0
[ 57.196415] applesmc: wait status failed: 5 != 0
[ 57.283082] applesmc: wait status failed: 5 != 0
[ 57.369749] applesmc: wait status failed: 5 != 0
[ 57.456416] applesmc: wait status failed: 5 != 0
[ 57.543083] applesmc: wait status failed: 5 != 0
[ 57.629749] applesmc: wait status failed: 5 != 0
[ 57.716416] applesmc: wait status failed: 5 != 0
[ 57.803083] applesmc: wait status failed: 5 != 0
[ 57.889750] applesmc: wait status failed: 5 != 0
[ 57.976416] applesmc: wait status failed: 5 != 0
[ 58.063084] applesmc: wait status failed: 5 != 0
[ 58.149749] applesmc: wait status failed: 5 != 0
[ 58.236415] applesmc: wait status failed: 5 != 0
[ 58.323212] applesmc: wait status failed: 5 != 0
[ 58.409750] applesmc: wait status failed: 5 != 0
[ 58.496417] applesmc: wait status failed: 5 != 0
[ 58.583082] applesmc: wait status failed: 5 != 0
[ 58.669749] applesmc: wait status failed: 5 != 0
[ 58.723366] applesmc: failed to init the device
[ 58.723551] ------------[ cut here ]------------
[ 58.723754] WARNING: at fs/sysfs/dir.c:487 sysfs_add_one+0xc5/0x160()
[ 58.723957] Hardware name: MacBookPro5,3
[ 58.724159] sysfs: cannot create duplicate filename '/devices/platform/ ÿÿÿÿ&¡ ÿÿÿÿ0¡ ÿÿÿÿh¡ ÿÿÿÿÉ¥ ÿÿÿÿÓ¥ ÿÿÿÿXŠ ÿÿÿÿ?Š ÿÿÿÿÜŠ ÿÿÿÿáŠ ÿÿÿÿü? ÿÿÿÿ?¢ ÿÿÿÿ¢ ÿÿÿÿh£ ÿÿÿÿw£ ÿÿÿÿn¢ ÿÿÿÿs¢ ÿÿÿÿ?¢ ÿÿÿÿ¥ ÿÿÿÿ×Š ÿÿÿÿî? ÿÿÿÿæŠ ÿÿÿÿ ÿÿÿÿ.768/'
[ 58.724561] Modules linked in: applesmc(+) input_polldev usb_storage
[ 58.725288] Pid: 857, comm: modprobe Not tainted 2.6.32-rc3-debug #24
[ 58.725469] Call Trace:
[ 58.725673] [<ffffffff810527f8>] warn_slowpath_common+0x78/0xb0
[ 58.725856] [<ffffffff8105288c>] warn_slowpath_fmt+0x3c/0x40
[ 58.726061] [<ffffffff811567e5>] sysfs_add_one+0xc5/0x160
[ 58.726237] [<ffffffff81155f2d>] sysfs_add_file_mode+0x5d/0xa0
[ 58.726442] [<ffffffff81158781>] internal_create_group+0xc1/0x1a0
[ 58.726648] [<ffffffffa0020000>] ? applesmc_init+0x0/0x57a [applesmc]
[ 58.726865] [<ffffffff8115888e>] sysfs_create_group+0xe/0x10
[ 58.727071] [<ffffffffa00200d2>] applesmc_init+0xd2/0x57a [applesmc]
[ 58.727279] [<ffffffff81074a09>] ? up_read+0x9/0x10
[ 58.727462] [<ffffffff810755f0>] ? __blocking_notifier_call_chain+0x60/0x80
[ 58.727669] [<ffffffffa0020000>] ? applesmc_init+0x0/0x57a [applesmc]
[ 58.727877] [<ffffffff81009047>] do_one_initcall+0x37/0x190
[ 58.728055] [<ffffffff8108a7b6>] sys_init_module+0xd6/0x250
[ 58.728258] [<ffffffff8100b3ab>] system_call_fastpath+0x16/0x1b
[ 58.728445] ---[ end trace 384ac166dab39815 ]---
[ 58.728700] applesmc: driver init failed (ret=-17)!
[ 0.000000] Linux version 2.6.32-rc3-debug (sonne@no) (gcc version 4.4.2 (Debian 4.4.2-3) ) #24 SMP PREEMPT Sat Nov 21 09:23:52 CET 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-debug root=/dev/sda3 ro usbcore.autosuspend=1 init=/bin/bash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae72b000 (usable)
[ 0.000000] BIOS-e820: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae92c000 - 00000000bf097000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf097000 - 00000000bf099000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf099000 - 00000000bf09b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf09b000 - 00000000bf09d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf09d000 - 00000000bfeb7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeb7000 - 00000000bfec6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfec6000 - 00000000bfecd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfed6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfed6000 - 00000000bfed7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfed7000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e7400000 - 00000000e7401000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 4, base: 3071MB, range: 1MB, type UC
[ 0.000000] total RAM coverred: 4095M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xae72b max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000ae72b000 (usable)
[ 0.000000] modified: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS)
[ 0.000000] modified: 00000000ae92c000 - 00000000bf097000 (ACPI data)
[ 0.000000] modified: 00000000bf097000 - 00000000bf099000 (ACPI NVS)
[ 0.000000] modified: 00000000bf099000 - 00000000bf09b000 (ACPI data)
[ 0.000000] modified: 00000000bf09b000 - 00000000bf09d000 (ACPI NVS)
[ 0.000000] modified: 00000000bf09d000 - 00000000bfeb7000 (ACPI data)
[ 0.000000] modified: 00000000bfeb7000 - 00000000bfec6000 (ACPI NVS)
[ 0.000000] modified: 00000000bfec6000 - 00000000bfecd000 (ACPI data)
[ 0.000000] modified: 00000000bfecd000 - 00000000bfed6000 (ACPI NVS)
[ 0.000000] modified: 00000000bfed6000 - 00000000bfed7000 (ACPI data)
[ 0.000000] modified: 00000000bfed7000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] modified: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] modified: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000e7400000 - 00000000e7401000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000ae72b000
[ 0.000000] 0000000000 - 00ae600000 page 2M
[ 0.000000] 00ae600000 - 00ae72b000 page 4k
[ 0.000000] kernel direct mapping tables up to ae72b000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bfeee1c0 0007C (v01 APPLE Apple00 000000AC 01000013)
[ 0.000000] ACPI: FACP 00000000bfeec000 000F4 (v04 APPLE Apple00 000000AC Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bfec6000 06238 (v01 APPLE MacBookP 00050003 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfecd000 00040
[ 0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfee9000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 00000000bfee8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bfee7000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bfee6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bfee5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bfee1000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfee4000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfee3000 0009F (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000183acac] TEXT DATA BSS ==> [0001000000 - 000183acac]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [000183b000 - 000183b201] BRK ==> [000183b000 - 000183b201]
[ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ae72b
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 976581
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 696163 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ae72b000 - 00000000ae92c000
[ 0.000000] PM: Registered nosave memory: 00000000ae92c000 - 00000000bf097000
[ 0.000000] PM: Registered nosave memory: 00000000bf097000 - 00000000bf099000
[ 0.000000] PM: Registered nosave memory: 00000000bf099000 - 00000000bf09b000
[ 0.000000] PM: Registered nosave memory: 00000000bf09b000 - 00000000bf09d000
[ 0.000000] PM: Registered nosave memory: 00000000bf09d000 - 00000000bfeb7000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb7000 - 00000000bfec6000
[ 0.000000] PM: Registered nosave memory: 00000000bfec6000 - 00000000bfecd000
[ 0.000000] PM: Registered nosave memory: 00000000bfecd000 - 00000000bfed6000
[ 0.000000] PM: Registered nosave memory: 00000000bfed6000 - 00000000bfed7000
[ 0.000000] PM: Registered nosave memory: 00000000bfed7000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfef9000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e7400000
[ 0.000000] PM: Registered nosave memory: 00000000e7400000 - 00000000e7401000
[ 0.000000] PM: Registered nosave memory: 00000000e7401000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:27500000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s84056 r8192 d22440 u1048576
[ 0.000000] pcpu-alloc: s84056 r8192 d22440 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 958558
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-debug root=/dev/sda3 ro usbcore.autosuspend=1 init=/bin/bash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3769132k/5242880k available (4714k kernel code, 1336556k absent, 136292k reserved, 2553k data, 468k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3051.255 MHz processor.
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6104.78 BogoMIPS (lpj=10170850)
[ 0.003756] Mount-cache hash table entries: 256
[ 0.004065] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004369] CPU: L2 cache: 6144K
[ 0.004555] CPU: Physical Processor ID: 0
[ 0.004753] CPU: Processor Core ID: 0
[ 0.004939] mce: CPU supports 6 MCE banks
[ 0.005141] CPU0: Thermal monitoring enabled (TM2)
[ 0.005340] using mwait in idle threads.
[ 0.005538] Performance Events: Core2 events, Intel PMU driver.
[ 0.006670] ... version: 2
[ 0.006868] ... bit width: 40
[ 0.007065] ... generic registers: 2
[ 0.007258] ... value mask: 000000ffffffffff
[ 0.007423] ... max period: 000000007fffffff
[ 0.007620] ... fixed-purpose events: 3
[ 0.007817] ... event mask: 0000000700000003
[ 0.008028] ACPI: Core revision 20090903
[ 0.017610] Setting APIC routing to flat
[ 0.018189] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051367] CPU0: Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06GHz stepping 0a
[ 0.053333] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.006666] Initializing CPU#1
[ 0.006666] Calibrating delay using timer specific routine.. 6105.84 BogoMIPS (lpj=10170955)
[ 0.006666] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.006666] CPU: L2 cache: 6144K
[ 0.006666] CPU: Physical Processor ID: 0
[ 0.006666] CPU: Processor Core ID: 1
[ 0.006666] mce: CPU supports 6 MCE banks
[ 0.006666] CPU1: Thermal monitoring enabled (TM2)
[ 0.143363] CPU1: Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06GHz stepping 0a
[ 0.145482] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146690] Brought up 2 CPUs
[ 0.146864] Total of 2 processors activated (12209.62 BogoMIPS).
[ 0.150009] CPU0 attaching sched-domain:
[ 0.150012] domain 0: span 0-1 level MC
[ 0.150014] groups: 0 1
[ 0.150018] CPU1 attaching sched-domain:
[ 0.150019] domain 0: span 0-1 level MC
[ 0.150021] groups: 1 0
[ 0.156853] Apple MacBookPro5 series board detected. Selecting PCI-method for reboots.
[ 0.157280] regulator: core version 0.5
[ 0.157523] NET: Registered protocol family 16
[ 0.158196] ACPI: bus type pci registered
[ 0.158692] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.158884] PCI: MCFG area at f0000000 reserved in E820
[ 0.159078] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.161181] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.161380] PCI: Using configuration type 1 for base access
[ 0.170081] bio: create slab <bio-0> at 0
[ 0.177460] ACPI: EC: EC description table is found, configuring boot EC
[ 0.180241] ACPI: BIOS _OSI(Linux) query ignored
[ 0.180873] ACPI: Interpreter enabled
[ 0.181072] ACPI: (supports S0 S3 S4 S5)
[ 0.181816] ACPI: Using IOAPIC for interrupt routing
[ 0.197061] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.197560] ACPI: No dock devices found.
[ 0.197969] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.198397] pci 0000:00:03.0: reg 10 io port: [0x3000-0x30ff]
[ 0.198485] pci 0000:00:03.2: reg 10 io port: [0x3180-0x31bf]
[ 0.198496] pci 0000:00:03.2: reg 20 io port: [0x3140-0x317f]
[ 0.198500] pci 0000:00:03.2: reg 24 io port: [0x3100-0x313f]
[ 0.198520] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.198723] pci 0000:00:03.2: PME# disabled
[ 0.199057] pci 0000:00:03.5: reg 10 32bit mmio: [0xe7400000-0xe747ffff]
[ 0.199141] pci 0000:00:04.0: reg 10 32bit mmio: [0xe7488000-0xe7488fff]
[ 0.210026] pci 0000:00:04.0: supports D1 D2
[ 0.210028] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.210230] pci 0000:00:04.0: PME# disabled
[ 0.210450] pci 0000:00:04.1: reg 10 32bit mmio: [0xe7489200-0xe74892ff]
[ 0.210488] pci 0000:00:04.1: supports D1 D2
[ 0.210489] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.210691] pci 0000:00:04.1: PME# disabled
[ 0.210916] pci 0000:00:06.0: reg 10 32bit mmio: [0xe7487000-0xe7487fff]
[ 0.210944] pci 0000:00:06.0: supports D1 D2
[ 0.210946] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.211148] pci 0000:00:06.0: PME# disabled
[ 0.211367] pci 0000:00:06.1: reg 10 32bit mmio: [0xe7489100-0xe74891ff]
[ 0.211403] pci 0000:00:06.1: supports D1 D2
[ 0.211405] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.211606] pci 0000:00:06.1: PME# disabled
[ 0.211830] pci 0000:00:08.0: reg 10 32bit mmio: [0xe7480000-0xe7483fff]
[ 0.211855] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.212038] pci 0000:00:08.0: PME# disabled
[ 0.212284] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe7486000-0xe7486fff]
[ 0.212288] pci 0000:00:0a.0: reg 14 io port: [0x31e0-0x31e7]
[ 0.212291] pci 0000:00:0a.0: reg 18 32bit mmio: [0xe7489000-0xe74890ff]
[ 0.212294] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xe7489300-0xe748930f]
[ 0.212314] pci 0000:00:0a.0: supports D1 D2
[ 0.212315] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212518] pci 0000:00:0a.0: PME# disabled
[ 0.212713] pci 0000:00:0b.0: reg 10 io port: [0x31d8-0x31df]
[ 0.212717] pci 0000:00:0b.0: reg 14 io port: [0x31ec-0x31ef]
[ 0.212720] pci 0000:00:0b.0: reg 18 io port: [0x31d0-0x31d7]
[ 0.212723] pci 0000:00:0b.0: reg 1c io port: [0x31e8-0x31eb]
[ 0.212726] pci 0000:00:0b.0: reg 20 io port: [0x31c0-0x31cf]
[ 0.212729] pci 0000:00:0b.0: reg 24 32bit mmio: [0xe7484000-0xe7485fff]
[ 0.212958] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.213164] pci 0000:00:0c.0: PME# disabled
[ 0.213582] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.213788] pci 0000:00:15.0: PME# disabled
[ 0.214225] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214431] pci 0000:00:16.0: PME# disabled
[ 0.214704] pci 0000:00:09.0: transparent bridge
[ 0.214905] pci 0000:00:09.0: bridge 32bit mmio: [0xe7300000-0xe73fffff]
[ 0.214948] pci 0000:02:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff]
[ 0.214962] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.214977] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe2000000-0xe3ffffff]
[ 0.214987] pci 0000:02:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.214998] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xe5000000-0xe507ffff]
[ 0.215082] pci 0000:00:0c.0: bridge io port: [0x2000-0x2fff]
[ 0.215089] pci 0000:00:0c.0: bridge 32bit mmio: [0xe2000000-0xe50fffff]
[ 0.215102] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.215309] pci 0000:04:00.0: reg 10 64bit mmio: [0xe7200000-0xe7203fff]
[ 0.215362] pci 0000:04:00.0: supports D1 D2
[ 0.215363] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.215565] pci 0000:04:00.0: PME# disabled
[ 0.215827] pci 0000:00:15.0: bridge 32bit mmio: [0xe7200000-0xe72fffff]
[ 0.215888] pci 0000:05:00.0: reg 10 64bit mmio: [0xe7100000-0xe7100fff]
[ 0.215940] pci 0000:05:00.0: supports D1 D2
[ 0.215941] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216144] pci 0000:05:00.0: PME# disabled
[ 0.216387] pci 0000:00:16.0: bridge 32bit mmio: [0xe7100000-0xe71fffff]
[ 0.216439] pci_bus 0000:00: on NUMA node 0
[ 0.216442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263431] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.265189] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.266848] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.268540] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.270188] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.272045] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.274132] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.276170] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.278027] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.280062] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.282041] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.284020] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.285928] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.287844] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.289829] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.291786] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.293687] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.295544] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.297598] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.299610] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.301516] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.303386] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.305358] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.307355] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.309313] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.311332] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.313338] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.315301] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.317214] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.319207] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.321011] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.322976] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.324915] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.326850] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.328694] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.330562] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.332378] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.334283] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.336292] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.338270] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.340179] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.342187] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.343954] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.345764] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.347582] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.347844] vgaarb: loaded
[ 0.348134] SCSI subsystem initialized
[ 0.353344] libata version 3.00 loaded.
[ 0.353398] usbcore: registered new interface driver usbfs
[ 0.353619] usbcore: registered new interface driver hub
[ 0.353847] usbcore: registered new device driver usb
[ 0.354163] PCI: Using ACPI for IRQ routing
[ 0.354741] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.355586] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.360005] Switching to clocksource tsc
[ 0.371094] Slow work thread pool: Starting up
[ 0.371315] Slow work thread pool: Ready
[ 0.371518] FS-Cache: Loaded
[ 0.371743] CacheFiles: Loaded
[ 0.371944] pnp: PnP ACPI init
[ 0.372143] ACPI: bus type pnp registered
[ 0.377592] pnp: PnP ACPI: found 9 devices
[ 0.377789] ACPI: ACPI bus type pnp unregistered
[ 0.377993] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.378198] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.378402] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.378604] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 0.378805] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.379007] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.379208] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.379408] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.379594] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.379796] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.385091] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.385291] pci 0000:00:09.0: IO window: disabled
[ 0.385464] pci 0000:00:09.0: MEM window: 0xe7300000-0xe73fffff
[ 0.385665] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.385865] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.386035] pci 0000:00:0c.0: IO window: 0x2000-0x2fff
[ 0.386243] pci 0000:00:0c.0: MEM window: 0xe2000000-0xe50fffff
[ 0.386438] pci 0000:00:0c.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.386717] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.386917] pci 0000:00:15.0: IO window: disabled
[ 0.387123] pci 0000:00:15.0: MEM window: 0xe7200000-0xe72fffff
[ 0.387323] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.387499] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[ 0.387699] pci 0000:00:16.0: IO window: disabled
[ 0.387905] pci 0000:00:16.0: MEM window: 0xe7100000-0xe71fffff
[ 0.388110] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.388317] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.388520] pci 0000:00:09.0: setting latency timer to 64
[ 0.388891] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23
[ 0.389114] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 0.389427] pci 0000:00:0c.0: setting latency timer to 64
[ 0.389904] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22
[ 0.390102] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 0.390369] pci 0000:00:15.0: setting latency timer to 64
[ 0.390784] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 0.390985] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 0.391251] pci 0000:00:16.0: setting latency timer to 64
[ 0.391256] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.391258] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.391259] pci_bus 0000:01: resource 1 mem: [0xe7300000-0xe73fffff]
[ 0.391261] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.391262] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.391264] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.391265] pci_bus 0000:02: resource 1 mem: [0xe2000000-0xe50fffff]
[ 0.391267] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.391268] pci_bus 0000:04: resource 1 mem: [0xe7200000-0xe72fffff]
[ 0.391270] pci_bus 0000:05: resource 1 mem: [0xe7100000-0xe71fffff]
[ 0.391287] NET: Registered protocol family 2
[ 0.391538] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.392183] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.393822] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394484] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.394685] TCP reno registered
[ 0.394935] NET: Registered protocol family 1
[ 0.396111] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.396321] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.396541] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.396794] Scanning for low memory corruption every 60 seconds
[ 0.397123] Intel AES-NI instructions are not detected.
[ 0.405841] VFS: Disk quotas dquot_6.5.2
[ 0.406087] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.406752] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.406986] msgmni has been set to 7363
[ 0.415839] alg: No test for cipher_null (cipher_null-generic)
[ 0.416027] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 0.416241] alg: No test for digest_null (digest_null-generic)
[ 0.416454] alg: No test for compress_null (compress_null-generic)
[ 0.417124] alg: No test for fcrypt (fcrypt-generic)
[ 0.418531] alg: No test for stdrng (krng)
[ 0.421983] alg: No test for ghash (ghash-generic)
[ 0.422244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.422530] io scheduler noop registered
[ 0.422734] io scheduler cfq registered (default)
[ 0.423111] pci 0000:02:00.0: Boot video device
[ 0.423388] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 0.423408] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.423771] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X
[ 0.423790] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 0.424151] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
[ 0.424169] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 0.424567] ACPI: AC Adapter [ADP1] (on-line)
[ 0.424866] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.425170] ACPI: Lid Switch [LID0]
[ 0.425408] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.425669] ACPI: Power Button [PWRB]
[ 0.425909] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.426143] ACPI: Sleep Button [SLPB]
[ 0.426376] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.426636] ACPI: Power Button [PWRF]
[ 0.427524] ACPI: SSDT 00000000bfec5a98 002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.428326] ACPI: SSDT 00000000bfec3c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.429136] Monitor-Mwait will be used to enter C-1 state
[ 0.429149] Monitor-Mwait will be used to enter C-2 state
[ 0.429170] Monitor-Mwait will be used to enter C-3 state
[ 0.429175] Marking TSC unstable due to TSC halts in idle
[ 0.429410] Switching to clocksource hpet
[ 0.429443] processor LNXCPU:00: registered as cooling_device0
[ 0.429816] ACPI: SSDT 00000000bfec4f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.430588] ACPI: SSDT 00000000bfec3f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.432503] Switched to high resolution mode on CPU 1
[ 0.432515] Switched to high resolution mode on CPU 0
[ 0.440902] processor LNXCPU:01: registered as cooling_device1
[ 0.453989] Linux agpgart interface v0.103
[ 0.454300] [drm] Initialized drm 1.1.0 20060810
[ 0.455964] brd: module loaded
[ 0.456822] loop: module loaded
[ 0.457113] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.457646] ahci 0000:00:0b.0: version 3.0
[ 0.457923] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20
[ 0.458127] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20
[ 0.458465] ahci 0000:00:0b.0: irq 27 for MSI/MSI-X
[ 0.458518] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 0.458780] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
[ 0.459008] ahci 0000:00:0b.0: setting latency timer to 64
[ 0.459178] scsi0 : ahci
[ 0.459576] scsi1 : ahci
[ 0.459837] scsi2 : ahci
[ 0.460183] scsi3 : ahci
[ 0.460534] scsi4 : ahci
[ 0.460852] scsi5 : ahci
[ 0.461176] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 27
[ 0.461486] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 27
[ 0.461745] ata3: DUMMY
[ 0.461940] ata4: DUMMY
[ 0.462136] ata5: DUMMY
[ 0.462309] ata6: DUMMY
[ 0.462747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.463222] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[ 0.463601] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
[ 0.463867] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.463869] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.464071] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.464539] ehci_hcd 0000:00:04.1: debug port 1
[ 0.464744] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.464754] ehci_hcd 0000:00:04.1: irq 19, io mem 0xe7489200
[ 0.473357] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.473712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.473913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.474169] usb usb1: Product: EHCI Host Controller
[ 0.474422] usb usb1: Manufacturer: Linux 2.6.32-rc3-debug ehci_hcd
[ 0.474668] usb usb1: SerialNumber: 0000:00:04.1
[ 0.474912] usb usb1: configuration #1 chosen from 1 choice
[ 0.475147] hub 1-0:1.0: USB hub found
[ 0.475348] hub 1-0:1.0: 7 ports detected
[ 0.475962] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
[ 0.476214] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18 (level, low) -> IRQ 18
[ 0.476441] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.476443] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.476646] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.476938] ehci_hcd 0000:00:06.1: debug port 1
[ 0.477141] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 0.477151] ehci_hcd 0000:00:06.1: irq 18, io mem 0xe7489100
[ 0.486690] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.486996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.487245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.487500] usb usb2: Product: EHCI Host Controller
[ 0.487701] usb usb2: Manufacturer: Linux 2.6.32-rc3-debug ehci_hcd
[ 0.487936] usb usb2: SerialNumber: 0000:00:06.1
[ 0.488226] usb usb2: configuration #1 chosen from 1 choice
[ 0.488654] hub 2-0:1.0: USB hub found
[ 0.488903] hub 2-0:1.0: 5 ports detected
[ 0.489181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.489626] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 0.489828] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[ 0.490108] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.490109] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.490311] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.490584] ohci_hcd 0000:00:04.0: irq 17, io mem 0xe7488000
[ 0.526875] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
[ 0.527418] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
[ 0.527961] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
[ 0.528499] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
[ 0.545416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.545618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.545873] usb usb3: Product: OHCI Host Controller
[ 0.546072] usb usb3: Manufacturer: Linux 2.6.32-rc3-debug ohci_hcd
[ 0.546260] usb usb3: SerialNumber: 0000:00:04.0
[ 0.546596] usb usb3: configuration #1 chosen from 1 choice
[ 0.547003] hub 3-0:1.0: USB hub found
[ 0.547238] hub 3-0:1.0: 7 ports detected
[ 0.547794] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 16
[ 0.547996] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 16 (level, low) -> IRQ 16
[ 0.548346] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.548349] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.548608] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.548934] ohci_hcd 0000:00:06.0: irq 16, io mem 0xe7487000
[ 0.554536] ACPI: Battery Slot [BAT0] (battery present)
[ 0.602851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.603053] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.603307] usb usb4: Product: OHCI Host Controller
[ 0.603506] usb usb4: Manufacturer: Linux 2.6.32-rc3-debug ohci_hcd
[ 0.603679] usb usb4: SerialNumber: 0000:00:06.0
[ 0.603903] usb usb4: configuration #1 chosen from 1 choice
[ 0.604134] hub 4-0:1.0: USB hub found
[ 0.604342] hub 4-0:1.0: 5 ports detected
[ 0.604617] usbcore: registered new interface driver libusual
[ 0.604908] PNP: No PS/2 controller found. Probing ports directly.
[ 0.605954] i8042.c: No controller found.
[ 0.606232] mice: PS/2 mouse device common for all mice
[ 0.606495] i2c i2c-0: nForce2 SMBus adapter at 0x3140
[ 0.606728] i2c i2c-1: nForce2 SMBus adapter at 0x3100
[ 0.607213] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.607688] cpuidle: using governor ladder
[ 0.608227] cpuidle: using governor menu
[ 0.609961] usbcore: registered new interface driver hiddev
[ 0.610225] usbcore: registered new interface driver usbhid
[ 0.610424] usbhid: v2.6:USB HID core driver
[ 0.610817] TCP cubic registered
[ 0.611349] NET: Registered protocol family 10
[ 0.611835] lo: Disabled Privacy Extensions
[ 0.612224] Mobile IPv6
[ 0.612420] NET: Registered protocol family 17
[ 0.612619] NET: Registered protocol family 15
[ 0.613598] PM: Resume from disk failed.
[ 0.783480] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 0.914587] usb 1-4: New USB device found, idVendor=05ac, idProduct=8507
[ 0.914795] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.914999] usb 1-4: Product: Built-in iSight
[ 0.915198] usb 1-4: Manufacturer: Apple Inc.
[ 0.915398] usb 1-4: SerialNumber: 8H98400GG8DD3A1A
[ 0.915737] usb 1-4: configuration #1 chosen from 1 choice
[ 0.940158] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.940378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.940576] ata1.00: ATA-8: APPLE SSD TS256A, AGAB0202, max UDMA/100
[ 0.940580] ata1.00: 490234752 sectors, multi 16: LBA48
[ 0.940872] ata1.00: configured for UDMA/100
[ 0.946824] ata2.00: ATAPI: HL-DT-ST DVDRW GS23N, SB00, max UDMA/133, ATAPI AN
[ 0.952363] ata2.00: configured for UDMA/133
[ 0.953609] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS256A AGAB PQ: 0 ANSI: 5
[ 0.954281] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 0.954344] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.954793] sd 0:0:0:0: [sda] Write Protect is off
[ 0.954978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.955411] sda: sda1 sda2 sda3 sda4 sda5
[ 0.959529] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.973423] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS23N SB00 PQ: 0 ANSI: 5
[ 0.985264] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 0.985472] Uniform CD-ROM driver Revision: 3.20
[ 0.985954] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.986144] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.988619] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 0.988826] EXT3-fs: write access will be enabled during recovery.
[ 0.993632] kjournald starting. Commit interval 5 seconds
[ 0.993668] EXT3-fs: recovery complete.
[ 0.993911] EXT3-fs: mounted filesystem with writeback data mode.
[ 0.993931] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 0.993952] Freeing unused kernel memory: 468k freed
[ 1.290145] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.419982] usb 2-5: New USB device found, idVendor=05ac, idProduct=8403
[ 1.420208] usb 2-5: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 1.420422] usb 2-5: Product: Card Reader
[ 1.420621] usb 2-5: Manufacturer: Apple
[ 1.420819] usb 2-5: SerialNumber: 000000009833
[ 1.421808] usb 2-5: configuration #1 chosen from 1 choice
[ 1.437137] Initializing USB Mass Storage driver...
[ 1.437519] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.437967] usb-storage: device found at 3
[ 1.437969] usb-storage: waiting for device to settle before scanning
[ 1.437996] usbcore: registered new interface driver usb-storage
[ 1.438200] USB Mass Storage support registered.
[ 1.700137] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 1.901968] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 1.902173] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.902376] usb 4-1: Product: BRCM2046 Hub
[ 1.902575] usb 4-1: Manufacturer: Apple Inc.
[ 1.902921] usb 4-1: configuration #1 chosen from 1 choice
[ 1.905010] hub 4-1:1.0: USB hub found
[ 1.907962] hub 4-1:1.0: 3 ports detected
[ 2.200145] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 2.395535] usb 3-5: New USB device found, idVendor=05ac, idProduct=8242
[ 2.395726] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.395929] usb 3-5: Product: IR Receiver
[ 2.396123] usb 3-5: Manufacturer: Apple Computer, Inc.
[ 2.396459] usb 3-5: configuration #1 chosen from 1 choice
[ 2.414764] apple 0003:05AC:8242.0001: hiddev96,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0
[ 2.693477] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 2.897533] usb 3-6: New USB device found, idVendor=05ac, idProduct=0237
[ 2.897739] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.897943] usb 3-6: Product: Apple Internal Keyboard / Trackpad
[ 2.898145] usb 3-6: Manufacturer: Apple Inc.
[ 2.898490] usb 3-6: configuration #1 chosen from 1 choice
[ 2.912334] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input5
[ 2.912704] apple 0003:05AC:0237.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0
[ 3.412646] apple 0003:05AC:0237.0003: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1
[ 3.484967] usb 4-1.1: new full speed USB device using ohci_hcd and address 3
[ 3.601969] usb 4-1.1: New USB device found, idVendor=05ac, idProduct=8217
[ 3.602177] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.602435] usb 4-1.1: Product: Bluetooth USB Host Controller
[ 3.602635] usb 4-1.1: Manufacturer: Apple Inc.
[ 3.602835] usb 4-1.1: SerialNumber: 002608DA9686
[ 3.603179] usb 4-1.1: configuration #1 chosen from 1 choice
[ 6.437436] usb-storage: device scan complete
[ 6.439909] scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
[ 6.441199] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.442638] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 58.357908] BUG: unable to handle kernel paging request at ffffffffa0015178
[ 58.358358] IP: [<ffffffff8126d90e>] vsnprintf+0x5e/0x5e0
[ 58.358703] PGD 1003067 PUD 1007063 PMD 13f3ac067 PTE 0
[ 58.359453] Oops: 0000 [#1] PREEMPT SMP
[ 58.360003] last sysfs file:
[ 58.360003] CPU 0
[ 58.360003] Modules linked in: tun(+) usb_storage
[ 58.360003] Pid: 895, comm: modprobe Not tainted 2.6.32-rc3-debug #24 MacBookPro5,3
[ 58.360003] RIP: 0010:[<ffffffff8126d90e>] [<ffffffff8126d90e>] vsnprintf+0x5e/0x5e0
[ 58.360003] RSP: 0018:ffff88013e803d48 EFLAGS: 00010086
[ 58.360003] RAX: 0000000000005c5c RBX: 0000000000000400 RCX: ffff88013e803ea8
[ 58.360003] RDX: ffffffffa0015178 RSI: 0000000000000400 RDI: ffffffff817c8c60
[ 58.360003] RBP: ffff88013e803dd8 R08: 0000000000000000 R09: 0000000000000000
[ 58.360003] R10: ffff880028401740 R11: 0000000000000000 R12: ffffffffa0015178
[ 58.360003] R13: ffffffffa0015178 R14: ffff88013e803ea8 R15: ffffffff817c9060
[ 58.360003] FS: 00007f7b8d4c76f0(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
[ 58.360003] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 58.360003] CR2: ffffffffa0015178 CR3: 000000013fbeb000 CR4: 00000000000406f0
[ 58.360003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 58.360003] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 58.360003] Process modprobe (pid: 895, threadinfo ffff88013e802000, task ffff88013f925880)
[ 58.360003] Stack:
[ 58.360003] 00000000fffffff4 ffff88013e803dc8 ffff88013f9cbaa0 000000003e803dc8
[ 58.360003] <0> ffff88013e803db8 ffffea00045f1ba0 0000000000000400 ffffffff817c8c60
[ 58.360003] <0> 0000000000000000 0000000000000000 0000000000000000 ffffffff810bbe6a
[ 58.360003] Call Trace:
[ 58.360003] [<ffffffff810bbe6a>] ? free_hot_page+0x2a/0x90
[ 58.360003] [<ffffffff8126dfa1>] vscnprintf+0x11/0x30
[ 58.360003] [<ffffffff81053291>] vprintk+0xb1/0x4f0
[ 58.360003] [<ffffffff810a769f>] ? trace_module_notify+0x3f/0x550
[ 58.360003] [<ffffffffa0017000>] ? tun_init+0x0/0x93 [tun]
[ 58.360003] [<ffffffff81494673>] printk+0x3c/0x41
[ 58.360003] [<ffffffffa0017025>] tun_init+0x25/0x93 [tun]
[ 58.360003] [<ffffffff81009047>] do_one_initcall+0x37/0x190
[ 58.360003] [<ffffffff8108a7b6>] sys_init_module+0xd6/0x250
[ 58.360003] [<ffffffff8100b3ab>] system_call_fastpath+0x16/0x1b
[ 58.360003] Code: c7 45 c0 00 00 00 00 85 f6 0f 88 5f 05 00 00 4c 8b 7d a8 4c 03 7d a0 73 12 48 8b 45 a8 49 c7 c7 ff ff ff ff 48 f7 d0 48 89 45 a0 <41> 0f b6 45 00 8b 55 a8 48 8b 5d a8 89 55 9c 84 c0 74 76 0f 1f
[ 58.360003] RIP [<ffffffff8126d90e>] vsnprintf+0x5e/0x5e0
[ 58.360003] RSP <ffff88013e803d48>
[ 58.360003] CR2: ffffffffa0015178
[ 58.360003] ---[ end trace 11656a28751a5869 ]---
[ 58.360003] note: modprobe[895] exited with preempt_count 2
[ 58.379243] BUG: scheduling while atomic: modprobe/895/0x10000003
[ 58.379454] Modules linked in: tun(+) usb_storage
[ 58.380051] Pid: 895, comm: modprobe Tainted: G D 2.6.32-rc3-debug #24
[ 58.380307] Call Trace:
[ 58.380506] [<ffffffff8104637c>] __schedule_bug+0x5c/0x70
[ 58.380697] [<ffffffff81495243>] thread_return+0x409/0x7e6
[ 58.380901] [<ffffffff8126b8c1>] ? number+0x2c1/0x2f0
[ 58.381114] [<ffffffff81047165>] __cond_resched+0x25/0x40
[ 58.381300] [<ffffffff8149570b>] _cond_resched+0x2b/0x40
[ 58.381482] [<ffffffff810d2657>] unmap_vmas+0x817/0x9b0
[ 58.381668] [<ffffffff810d77df>] exit_mmap+0xef/0x1c0
[ 58.381871] [<ffffffff8104fdcd>] mmput+0x2d/0xe0
[ 58.382072] [<ffffffff81054810>] exit_mm+0x100/0x140
[ 58.382248] [<ffffffff81091728>] ? acct_collect+0x158/0x1a0
[ 58.382423] [<ffffffff810567bc>] do_exit+0x65c/0x7d0
[ 58.382625] [<ffffffff81052ea8>] ? release_console_sem+0x1b8/0x210
[ 58.382830] [<ffffffff8100fa35>] oops_end+0x75/0xa0
[ 58.383022] [<ffffffff8102d25a>] no_context+0xea/0x250
[ 58.383218] [<ffffffff8102d4d5>] __bad_area_nosemaphore+0x115/0x1d0
[ 58.383441] [<ffffffff81156160>] ? sysfs_ilookup_test+0x0/0x20
[ 58.383644] [<ffffffff8102d59e>] bad_area_nosemaphore+0xe/0x10
[ 58.383846] [<ffffffff8102d95a>] do_page_fault+0x23a/0x2e0
[ 58.384050] [<ffffffff81497fdf>] page_fault+0x1f/0x30
[ 58.384254] [<ffffffff8126d90e>] ? vsnprintf+0x5e/0x5e0
[ 58.384473] [<ffffffff810bbe6a>] ? free_hot_page+0x2a/0x90
[ 58.384676] [<ffffffff8126dfa1>] vscnprintf+0x11/0x30
[ 58.384879] [<ffffffff81053291>] vprintk+0xb1/0x4f0
[ 58.385058] [<ffffffff810a769f>] ? trace_module_notify+0x3f/0x550
[ 58.385241] [<ffffffffa0017000>] ? tun_init+0x0/0x93 [tun]
[ 58.385444] [<ffffffff81494673>] printk+0x3c/0x41
[ 58.385646] [<ffffffffa0017025>] tun_init+0x25/0x93 [tun]
[ 58.385849] [<ffffffff81009047>] do_one_initcall+0x37/0x190
[ 58.386051] [<ffffffff8108a7b6>] sys_init_module+0xd6/0x250
[ 58.386254] [<ffffffff8100b3ab>] system_call_fastpath+0x16/0x1b
[ 178.994918] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 178.995345] EXT3 FS on sda3, internal journal

Next message: Oliver Neukum: "Re: [PATCH v4] [RFC] NEXIO (or iNexio) support for usbtouchscreen"
Previous message: Yinghai Lu: "x86 related patches 11-21-2009"
In reply to: Soeren Sonnenburg: "Re: [Bug #14626] oops on boot starting udev"
Next in thread: Justin P. Mattock: "Re: [Bug #14626] oops on boot starting udev"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]