Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs.UHCI

[Alan Stern]

On Sun, 22 Nov 2009, Simon Arlott wrote:

> On 18/11/09 22:25, Alan Stern wrote:
> > On Wed, 18 Nov 2009, Simon Arlott wrote:
> >> > What happens with other sorts of devices, such as a USB flash drive?
> >>  
> >> I can write a 10MB file to an USB flash drive over OHCI, and umount+sync
> >> takes around 13 seconds.
> > 
> > Yes, that's about right.  It leads me to wonder if something funny is
> > going on with the device, or least with the firmware-loading part of
> > it.  Odd that it works differently with UHCI and OHCI, though.  There
> > shouldn't be any differences visible to the device.  You don't have
> > anything else attached to the same bus, do you?
> 
> Yes, but not in use and I could disconnect everything to test it.
> 
> core/hcd.c has an interesting comment in usb_hcd_check_unlink_urb():

You mean usb_hcd_poll_rh_status().

>         /* The USB 2.0 spec says 256 ms.  This is close enough and won't
>          * exceed that limit if HZ is 100. The math is more clunky than
>          * maybe expected, this is to make sure that all timers for USB devices
>          * fire at the same time to give the CPU a break inbetween */
> 
> I'll try increasing the frequency of this timer too.

It shouldn't make any difference; that timer is used with OHCI only in 
exceptional circumstances (like immediately after a device is plugged 
in or unplugged), not during normal operation.  But maybe something 
strange is going on.  You could add a printk in ohci_hub_status_data(), 
which is the routine that timer ends up calling.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/