[Patch 16/29] GRU - Update irq infrastructure
From: steiner
Date: Tue Nov 24 2009 - 10:11:38 EST
From: Jack Steiner <steiner@xxxxxxx>
Update the GRU irq allocate/free functions to use the latest upstream
infrastructure.
Signed-off-by: Jack Steiner <steiner@xxxxxxx>
---
drivers/misc/sgi-gru/grufault.c | 49 ++++---
drivers/misc/sgi-gru/grufile.c | 258 +++++++++++++++++++++++++++++++--------
drivers/misc/sgi-gru/grumain.c | 9 +
drivers/misc/sgi-gru/grutables.h | 14 +-
4 files changed, 260 insertions(+), 70 deletions(-)
Index: linux/drivers/misc/sgi-gru/grufault.c
===================================================================
--- linux.orig/drivers/misc/sgi-gru/grufault.c 2009-11-24 08:15:11.000000000 -0600
+++ linux/drivers/misc/sgi-gru/grufault.c 2009-11-24 08:30:54.000000000 -0600
@@ -134,19 +134,6 @@ static void gru_cb_set_istatus_active(st
}
/*
- * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the
- * interrupt. Interrupts are always sent to a cpu on the blade that contains the
- * GRU (except for headless blades which are not currently supported). A blade
- * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ
- * number uniquely identifies the GRU chiplet on the local blade that caused the
- * interrupt. Always called in interrupt context.
- */
-static inline struct gru_state *irq_to_gru(int irq)
-{
- return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU];
-}
-
-/*
* Read & clear a TFM
*
* The GRU has an array of fault maps. A map is private to a cpu
@@ -449,7 +436,7 @@ failactive:
* Note that this is the interrupt handler that is registered with linux
* interrupt handlers.
*/
-irqreturn_t gru_intr(int irq, void *dev_id)
+static irqreturn_t gru_intr(int chiplet, int blade)
{
struct gru_state *gru;
struct gru_tlb_fault_map imap, dmap;
@@ -459,13 +446,18 @@ irqreturn_t gru_intr(int irq, void *dev_
STAT(intr);
- gru = irq_to_gru(irq);
+ gru = &gru_base[blade]->bs_grus[chiplet];
if (!gru) {
- dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n",
- raw_smp_processor_id(), irq);
+ dev_err(grudev, "GRU: invalid interrupt: cpu %d, chiplet %d\n",
+ raw_smp_processor_id(), chiplet);
return IRQ_NONE;
}
get_clear_fault_map(gru, &imap, &dmap);
+ gru_dbg(grudev,
+ "cpu %d, chiplet %d, gid %d, imap %016lx %016lx, dmap %016lx %016lx\n",
+ smp_processor_id(), chiplet, gru->gs_gid,
+ imap.fault_bits[0], imap.fault_bits[1],
+ dmap.fault_bits[0], dmap.fault_bits[1]);
for_each_cbr_in_tfm(cbrnum, dmap.fault_bits) {
complete(gru->gs_blade->bs_async_wq);
@@ -503,6 +495,29 @@ irqreturn_t gru_intr(int irq, void *dev_
return IRQ_HANDLED;
}
+irqreturn_t gru0_intr(int irq, void *dev_id)
+{
+ return gru_intr(0, uv_numa_blade_id());
+}
+
+irqreturn_t gru1_intr(int irq, void *dev_id)
+{
+ return gru_intr(1, uv_numa_blade_id());
+}
+
+irqreturn_t gru_intr_mblade(int irq, void *dev_id)
+{
+ int blade;
+
+ for_each_possible_blade(blade) {
+ if (uv_blade_nr_possible_cpus(blade))
+ continue;
+ gru_intr(0, blade);
+ gru_intr(1, blade);
+ }
+ return IRQ_HANDLED;
+}
+
static int gru_user_dropin(struct gru_thread_state *gts,
struct gru_tlb_fault_handle *tfh,
Index: linux/drivers/misc/sgi-gru/grufile.c
===================================================================
--- linux.orig/drivers/misc/sgi-gru/grufile.c 2009-11-24 08:15:04.000000000 -0600
+++ linux/drivers/misc/sgi-gru/grufile.c 2009-11-24 08:31:43.000000000 -0600
@@ -35,6 +35,9 @@
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/uaccess.h>
+#ifdef CONFIG_X86_64
+#include <asm/uv/uv_irq.h>
+#endif
#include <asm/uv/uv.h>
#include "gru.h"
#include "grulib.h"
@@ -130,7 +133,6 @@ static int gru_create_new_context(unsign
struct gru_vma_data *vdata;
int ret = -EINVAL;
-
if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
return -EFAULT;
@@ -302,34 +304,210 @@ fail:
return -ENOMEM;
}
-#ifdef CONFIG_IA64
+static void gru_free_tables(void)
+{
+ int bid;
+ int order = get_order(sizeof(struct gru_state) *
+ GRU_CHIPLETS_PER_BLADE);
+
+ for (bid = 0; bid < GRU_MAX_BLADES; bid++)
+ free_pages((unsigned long)gru_base[bid], order);
+}
-static int get_base_irq(void)
+static unsigned long gru_chiplet_cpu_to_mmr(int chiplet, int cpu, int *corep)
{
- return IRQ_GRU;
+ unsigned long mmr = 0;
+ int core;
+
+ /*
+ * We target the cores of a blade and not the hyperthreads themselves.
+ * There is a max of 8 cores per socket and 2 sockets per blade,
+ * making for a max total of 16 cores (i.e., 16 CPUs without
+ * hyperthreading and 32 CPUs with hyperthreading).
+ */
+ core = uv_cpu_core_number(cpu) + UV_MAX_INT_CORES * uv_cpu_socket_number(cpu);
+ if (core >= GRU_NUM_TFM || uv_cpu_ht_number(cpu))
+ return 0;
+
+ if (chiplet == 0) {
+ mmr = UVH_GR0_TLB_INT0_CONFIG +
+ core * (UVH_GR0_TLB_INT1_CONFIG - UVH_GR0_TLB_INT0_CONFIG);
+ } else if (chiplet == 1) {
+ mmr = UVH_GR1_TLB_INT0_CONFIG +
+ core * (UVH_GR1_TLB_INT1_CONFIG - UVH_GR1_TLB_INT0_CONFIG);
+ } else {
+ BUG();
+ }
+
+ *corep = core;
+ return mmr;
}
-#elif defined CONFIG_X86_64
+#ifdef CONFIG_IA64
+
+static int gru_irq_count[GRU_CHIPLETS_PER_BLADE];
-static void noop(unsigned int irq)
+static void gru_noop(unsigned int irq)
{
}
-static struct irq_chip gru_chip = {
- .name = "gru",
- .mask = noop,
- .unmask = noop,
- .ack = noop,
+static struct irq_chip gru_chip[GRU_CHIPLETS_PER_BLADE] = {
+ [0 ... GRU_CHIPLETS_PER_BLADE - 1] {
+ .mask = gru_noop,
+ .unmask = gru_noop,
+ .ack = gru_noop
+ }
};
-static int get_base_irq(void)
+static int gru_chiplet_setup_tlb_irq(int chiplet, char *irq_name,
+ irq_handler_t irq_handler, int cpu, int blade)
+{
+ unsigned long mmr;
+ int irq = IRQ_GRU + chiplet;
+ int ret, core;
+
+ mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core);
+ if (mmr == 0)
+ return 0;
+
+ if (gru_irq_count[chiplet] == 0) {
+ gru_chip[chiplet].name = irq_name;
+ ret = set_irq_chip(irq, &gru_chip[chiplet]);
+ if (ret) {
+ printk(KERN_ERR "%s: set_irq_chip failed, errno=%d\n",
+ GRU_DRIVER_ID_STR, -ret);
+ return ret;
+ }
+
+ ret = request_irq(irq, irq_handler, 0, irq_name, NULL);
+ if (ret) {
+ printk(KERN_ERR "%s: request_irq failed, errno=%d\n",
+ GRU_DRIVER_ID_STR, -ret);
+ return ret;
+ }
+ }
+ gru_irq_count[chiplet]++;
+
+ return 0;
+}
+
+static void gru_chiplet_teardown_tlb_irq(int chiplet, int cpu, int blade)
+{
+ unsigned long mmr;
+ int core, irq = IRQ_GRU + chiplet;
+
+ if (gru_irq_count[chiplet] == 0)
+ return;
+
+ mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core);
+ if (mmr == 0)
+ return;
+
+ if (--gru_irq_count[chiplet] == 0)
+ free_irq(irq, NULL);
+}
+
+#elif defined CONFIG_X86_64
+
+static int gru_chiplet_setup_tlb_irq(int chiplet, char *irq_name,
+ irq_handler_t irq_handler, int cpu, int blade)
+{
+ unsigned long mmr;
+ int irq, core;
+ int ret;
+
+ mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core);
+ if (mmr == 0)
+ return 0;
+
+ irq = uv_setup_irq(irq_name, cpu, blade, mmr, UV_AFFINITY_CPU);
+ if (irq < 0) {
+ printk(KERN_ERR "%s: uv_setup_irq failed, errno=%d\n",
+ GRU_DRIVER_ID_STR, -irq);
+ return irq;
+ }
+
+ ret = request_irq(irq, irq_handler, 0, irq_name, NULL);
+ if (ret) {
+ uv_teardown_irq(irq);
+ printk(KERN_ERR "%s: request_irq failed, errno=%d\n",
+ GRU_DRIVER_ID_STR, -ret);
+ return ret;
+ }
+ gru_base[blade]->bs_grus[chiplet].gs_irq[core] = irq;
+ return 0;
+}
+
+static void gru_chiplet_teardown_tlb_irq(int chiplet, int cpu, int blade)
{
- set_irq_chip(IRQ_GRU, &gru_chip);
- set_irq_chip(IRQ_GRU + 1, &gru_chip);
- return IRQ_GRU;
+ int irq, core;
+ unsigned long mmr;
+
+ mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core);
+ if (mmr) {
+ irq = gru_base[blade]->bs_grus[chiplet].gs_irq[core];
+ if (irq) {
+ free_irq(irq, NULL);
+ uv_teardown_irq(irq);
+ }
+ }
}
+
#endif
+static void gru_teardown_tlb_irqs(void)
+{
+ int blade;
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ blade = uv_cpu_to_blade_id(cpu);
+ gru_chiplet_teardown_tlb_irq(0, cpu, blade);
+ gru_chiplet_teardown_tlb_irq(1, cpu, blade);
+ }
+ for_each_possible_blade(blade) {
+ if (uv_blade_nr_possible_cpus(blade))
+ continue;
+ gru_chiplet_teardown_tlb_irq(0, 0, blade);
+ gru_chiplet_teardown_tlb_irq(1, 0, blade);
+ }
+}
+
+static int gru_setup_tlb_irqs(void)
+{
+ int blade;
+ int cpu;
+ int ret;
+
+ for_each_online_cpu(cpu) {
+ blade = uv_cpu_to_blade_id(cpu);
+ ret = gru_chiplet_setup_tlb_irq(0, "GRU0_TLB", gru0_intr, cpu, blade);
+ if (ret != 0)
+ goto exit1;
+
+ ret = gru_chiplet_setup_tlb_irq(1, "GRU1_TLB", gru1_intr, cpu, blade);
+ if (ret != 0)
+ goto exit1;
+ }
+ for_each_possible_blade(blade) {
+ if (uv_blade_nr_possible_cpus(blade))
+ continue;
+ ret = gru_chiplet_setup_tlb_irq(0, "GRU0_TLB", gru_intr_mblade, 0, blade);
+ if (ret != 0)
+ goto exit1;
+
+ ret = gru_chiplet_setup_tlb_irq(1, "GRU1_TLB", gru_intr_mblade, 0, blade);
+ if (ret != 0)
+ goto exit1;
+ }
+
+ return 0;
+
+exit1:
+ gru_teardown_tlb_irqs();
+ return ret;
+}
+
/*
* gru_init
*
@@ -337,8 +515,7 @@ static int get_base_irq(void)
*/
static int __init gru_init(void)
{
- int ret, irq, chip;
- char id[10];
+ int ret;
if (!is_uv_system())
return 0;
@@ -353,41 +530,29 @@ static int __init gru_init(void)
gru_end_paddr = gru_start_paddr + GRU_MAX_BLADES * GRU_SIZE;
printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
gru_start_paddr, gru_end_paddr);
- irq = get_base_irq();
- for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) {
- ret = request_irq(irq + chip, gru_intr, 0, id, NULL);
- /* TODO: fix irq handling on x86. For now ignore failure because
- * interrupts are not required & not yet fully supported */
- if (ret) {
- printk(KERN_WARNING
- "!!!WARNING: GRU ignoring request failure!!!\n");
- ret = 0;
- }
- if (ret) {
- printk(KERN_ERR "%s: request_irq failed\n",
- GRU_DRIVER_ID_STR);
- goto exit1;
- }
- }
-
ret = misc_register(&gru_miscdev);
if (ret) {
printk(KERN_ERR "%s: misc_register failed\n",
GRU_DRIVER_ID_STR);
- goto exit1;
+ goto exit0;
}
ret = gru_proc_init();
if (ret) {
printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
- goto exit2;
+ goto exit1;
}
ret = gru_init_tables(gru_start_paddr, gru_start_vaddr);
if (ret) {
printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
- goto exit3;
+ goto exit2;
}
+
+ ret = gru_setup_tlb_irqs();
+ if (ret != 0)
+ goto exit3;
+
gru_kservices_init();
printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
@@ -395,31 +560,24 @@ static int __init gru_init(void)
return 0;
exit3:
- gru_proc_exit();
+ gru_free_tables();
exit2:
- misc_deregister(&gru_miscdev);
+ gru_proc_exit();
exit1:
- for (--chip; chip >= 0; chip--)
- free_irq(irq + chip, NULL);
+ misc_deregister(&gru_miscdev);
+exit0:
return ret;
}
static void __exit gru_exit(void)
{
- int i, bid;
- int order = get_order(sizeof(struct gru_state) *
- GRU_CHIPLETS_PER_BLADE);
-
if (!is_uv_system())
return;
- for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
- free_irq(IRQ_GRU + i, NULL);
+ gru_teardown_tlb_irqs();
gru_kservices_exit();
- for (bid = 0; bid < GRU_MAX_BLADES; bid++)
- free_pages((unsigned long)gru_base[bid], order);
-
+ gru_free_tables();
misc_deregister(&gru_miscdev);
gru_proc_exit();
}
Index: linux/drivers/misc/sgi-gru/grumain.c
===================================================================
--- linux.orig/drivers/misc/sgi-gru/grumain.c 2009-11-24 08:15:11.000000000 -0600
+++ linux/drivers/misc/sgi-gru/grumain.c 2009-11-24 08:30:54.000000000 -0600
@@ -49,12 +49,16 @@ struct device *grudev = &gru_device;
/*
* Select a gru fault map to be used by the current cpu. Note that
* multiple cpus may be using the same map.
- * ZZZ should "shift" be used?? Depends on HT cpu numbering
* ZZZ should be inline but did not work on emulator
*/
int gru_cpu_fault_map_id(void)
{
- return uv_blade_processor_id() % GRU_NUM_TFM;
+ int cpu = smp_processor_id();
+ int id, core;
+
+ core = uv_cpu_core_number(cpu);
+ id = core + UV_MAX_INT_CORES * uv_cpu_socket_number(cpu);
+ return id;
}
/*--------- ASID Management -------------------------------------------
@@ -605,6 +609,7 @@ void gru_load_context(struct gru_thread_
cch->unmap_enable = 1;
cch->tfm_done_bit_enable = 1;
cch->cb_int_enable = 1;
+ cch->tlb_int_select = 0; /* For now, ints go to cpu 0 */
} else {
cch->unmap_enable = 0;
cch->tfm_done_bit_enable = 0;
Index: linux/drivers/misc/sgi-gru/grutables.h
===================================================================
--- linux.orig/drivers/misc/sgi-gru/grutables.h 2009-11-24 08:15:07.000000000 -0600
+++ linux/drivers/misc/sgi-gru/grutables.h 2009-11-24 08:30:54.000000000 -0600
@@ -444,6 +444,7 @@ struct gru_state {
in use */
struct gru_thread_state *gs_gts[GRU_NUM_CCH]; /* GTS currently using
the context */
+ int gs_irq[GRU_NUM_TFM]; /* Interrupt irqs */
};
/*
@@ -610,6 +611,15 @@ static inline int is_kernel_context(stru
return !gts->ts_mm;
}
+/*
+ * The following are for Nehelem-EX. A more general scheme is needed for
+ * future processors.
+ */
+#define UV_MAX_INT_CORES 8
+#define uv_cpu_socket_number(p) ((cpu_physical_id(p) >> 5) & 1)
+#define uv_cpu_ht_number(p) (cpu_physical_id(p) & 1)
+#define uv_cpu_core_number(p) (((cpu_physical_id(p) >> 2) & 4) | \
+ ((cpu_physical_id(p) >> 1) & 3))
/*-----------------------------------------------------------------------------
* Function prototypes & externs
*/
@@ -633,9 +643,11 @@ extern void gts_drop(struct gru_thread_s
extern void gru_tgh_flush_init(struct gru_state *gru);
extern int gru_kservices_init(void);
extern void gru_kservices_exit(void);
+extern irqreturn_t gru0_intr(int irq, void *dev_id);
+extern irqreturn_t gru1_intr(int irq, void *dev_id);
+extern irqreturn_t gru_intr_mblade(int irq, void *dev_id);
extern int gru_dump_chiplet_request(unsigned long arg);
extern long gru_get_gseg_statistics(unsigned long arg);
-extern irqreturn_t gru_intr(int irq, void *dev_id);
extern int gru_handle_user_call_os(unsigned long address);
extern int gru_user_flush_tlb(unsigned long arg);
extern int gru_user_unload_context(unsigned long arg);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/