Re: [PATCH] Add support for Mobilcom Debitel USB UMTS Surf-Stickto option driver

From: Gernot Hillier
Date: Fri Nov 27 2009 - 07:49:43 EST


Oliver Neukum wrote:
> Am Dienstag, 24. November 2009 19:00:33 schrieb Gernot Hillier:
>> As you might have expected, I have no detailed spec about the device
>> which could explain this. I can only say that the device reacts on AT
>> commands on ttyUSB1 and ttyUSB2 while ttyUSB0 seems to serve other
>> purposes.
>>
>> What do you think - shall I disable sending the usb control message
>> depending on bInterfaceNumber? Any better ideas?
>
> I have no better idea.
>
> Regards
> Oliver
>

Ok, so here comes the update. The patch was tested to apply against 2.6.31
as well as 2.6-git. Please apply if you agree...

----------- SNIP -------------
From: Gernot Hillier <gernot@xxxxxxxxxx>

This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf
stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...).

To see these ids, you need to switch the stick to modem operation first
with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to
1c9e:9603 and thus be recognized by the option driver.

In addition, this device seems to ignore setting of RTS/DTR by option_send_
setup and doesn't answer the usb_control_msg leading to a 5 s timeout
(USB_CTRL_SET_TIMEOUT) in userspace open() and other operations. As this
confused several impatient userspace applications like Minicom and
ModemManager, I return immediately instead.

Signed-off-by: Gernot Hillier <gernot@xxxxxxxxxx>

--- linux-source-2.6.31/drivers/usb/serial/option.c.orig 2009-11-24 08:17:31.000000000 +0100
+++ linux-source-2.6.31/drivers/usb/serial/option.c 2009-11-27 12:48:15.000000000 +0100
@@ -337,6 +337,10 @@
#define AIRPLUS_VENDOR_ID 0x1011
#define AIRPLUS_PRODUCT_MCD650 0x3198

+/* 4G Systems products */
+#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e
+#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -600,6 +604,7 @@
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
+ { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1171,6 +1176,13 @@
int val = 0;
dbg("%s", __func__);

+ /* 4G Systems W14 simply ignores this message on interface 0 & 1
+ and would cause long timeouts when calling usb_control_msg() */
+ if (serial->dev->descriptor.idVendor == FOUR_G_SYSTEMS_VENDOR_ID &&
+ serial->dev->descriptor.idProduct == FOUR_G_SYSTEMS_PRODUCT_W14 &&
+ (ifNum == 0 || ifNum == 1) )
+ return -EIO;
+
portdata = usb_get_serial_port_data(port);

if (portdata->dtr_state)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/