[PATCH] therm_adt746x: Don't access non-existing register

[Jean Delvare]

Michel, Darrick,

Apparently you are using the therm_adt746x driver, so maybe you would
be interested in testing and carrying the following patch. I've sent it
to Colin Leroy, who is listed as the maintainer for this driver, 1.5
month ago, but did not hear back.

* * * * *

The ADT746x don't have any register at sub-address 0, so better use an
existing register for the initial test read.

Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
Tested-by: Tim Shepard <shep@xxxxxxxxxxxx>
Cc: Colin Leroy <colin@xxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Paul Mackerras <paulus@xxxxxxxxx>
---
 drivers/macintosh/therm_adt746x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-2.6.32-rc4.orig/drivers/macintosh/therm_adt746x.c	2009-10-12 11:53:59.000000000 +0200
+++ linux-2.6.32-rc4/drivers/macintosh/therm_adt746x.c	2009-10-14 17:27:46.000000000 +0200
@@ -387,7 +387,7 @@ static int probe_thermostat(struct i2c_c
 	i2c_set_clientdata(client, th);
 	th->clt = client;
 
-	rc = read_reg(th, 0);
+	rc = read_reg(th, CONFIG_REG);
 	if (rc < 0) {
 		dev_err(&client->dev, "Thermostat failed to read config!\n");
 		kfree(th);


-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/