Re: mmotm-2009-12-08-17-45 resume slowly

From: David Miller
Date: Thu Dec 10 2009 - 17:29:47 EST

Next message: Adam Litke: "[PATCH] virtio: Fix scheduling while atomic in virtio_balloon stats"
Previous message: Alexander Holler: "Re: Problems with p55-express and sleeping usb-hds"
In reply to: Dave Young: "Re: mmotm-2009-12-08-17-45 resume slowly"
Next in thread: Johannes Berg: "Re: mmotm-2009-12-08-17-45 resume slowly"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxxxxxxx>
Date: Thu, 10 Dec 2009 18:52:51 +0900 (JST)

> (cc to netdev)
>
> Hi net-folks
>
>> > [ ,A (B561.323866] mtrr: type mismatch for e0000000,10000000 old:
>> > write-back new: write-combining
>> > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after
>> > 500ms, disconnecting.
>> > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1)
>
> What's mean "No probe response"? Why its point waste 2000sec?

I think you'll get more responses from the wireless list,
replacing netdev with linux-wireless in the CC:...

>
>
>
> (intentional full quote)
>
>> Sorry forgot cc list
>>
>>
>> On Thu, Dec 10, 2009 at 5:27 PM, Dave Young <hidave.darkstar@xxxxxxxxx> wrote:
>> > Hi,
>> >
>> > With rencent mm patch sets (since 2.6.32), the resume is too slow with
>> > screen being black over 5 minutes
>> >
>> > (Dell e5400 with intel graphic card)
>> >
>> > Here is the full dmesg:
>> >
>> > [ ,A (B ,A (B0.000000] Initializing cgroup subsys cpuset
>> > [ ,A (B ,A (B0.000000] Initializing cgroup subsys cpu
>> > [ ,A (B ,A (B0.000000] Linux version 2.6.32-mm1 (dave@darkstar) (gcc version
>> > 4.2.4) #5 SMP Thu Dec 10 15:23:34 CST 2009
>> > [ ,A (B ,A (B0.000000] BIOS-provided physical RAM map:
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 0000000000100000 - 000000003d38d400 (usable)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 000000003d38f400 - 0000000040000000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
>> > [ ,A (B ,A (B0.000000] ,A (BBIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
>> > [ ,A (B ,A (B0.000000] Notice: NX (Execute Disable) protection missing in CPU
>> > or disabled in BIOS!
>> > [ ,A (B ,A (B0.000000] DMI 2.4 present.
>> > [ ,A (B ,A (B0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000
>> > [ ,A (B ,A (B0.000000] MTRR default type: uncachable
>> > [ ,A (B ,A (B0.000000] MTRR fixed ranges enabled:
>> > [ ,A (B ,A (B0.000000] ,A (B 00000-9FFFF write-back
>> > [ ,A (B ,A (B0.000000] ,A (B A0000-BFFFF uncachable
>> > [ ,A (B ,A (B0.000000] ,A (B C0000-CFFFF write-protect
>> > [ ,A (B ,A (B0.000000] ,A (B D0000-EFFFF uncachable
>> > [ ,A (B ,A (B0.000000] ,A (B F0000-FFFFF write-protect
>> > [ ,A (B ,A (B0.000000] MTRR variable ranges enabled:
>> > [ ,A (B ,A (B0.000000] ,A (B 0 base 000000000 mask C00000000 write-back
>> > [ ,A (B ,A (B0.000000] ,A (B 1 base 0E0000000 mask FE0000000 uncachable
>> > [ ,A (B ,A (B0.000000] ,A (B 2 base 03DC00000 mask FFFC00000 uncachable
>> > [ ,A (B ,A (B0.000000] ,A (B 3 base 03E000000 mask FFE000000 uncachable
>> > [ ,A (B ,A (B0.000000] ,A (B 4 base 03DB00000 mask FFFF00000 uncachable
>> > [ ,A (B ,A (B0.000000] ,A (B 5 disabled
>> > [ ,A (B ,A (B0.000000] ,A (B 6 disabled
>> > [ ,A (B ,A (B0.000000] ,A (B 7 disabled
>> > [ ,A (B ,A (B0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> > [ ,A (B ,A (B0.000000] e820 update range: 000000003db00000 - 0000000040000000
>> > (usable) ==> (reserved)
>> > [ ,A (B ,A (B0.000000] e820 update range: 00000000e0000000 - 0000000100000000
>> > (usable) ==> (reserved)
>> > [ ,A (B ,A (B0.000000] initial memory mapped : 0 - 02000000
>> > [ ,A (B ,A (B0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
>> > [ ,A (B ,A (B0.000000] ,A (B0000000000 - 0000400000 page 4k
>> > [ ,A (B ,A (B0.000000] ,A (B0000400000 - 0037400000 page 2M
>> > [ ,A (B ,A (B0.000000] ,A (B0037400000 - 00377fe000 page 4k
>> > [ ,A (B ,A (B0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
>> > [ ,A (B ,A (B0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL ,A (B)
>> > [ ,A (B ,A (B0.000000] ACPI: XSDT 3d391e00 00064 (v01 DELL ,A (B ,A (BM09 ,A (B ,A (B 27D9041D
>> > ASL ,A (B00000061)
>> > [ ,A (B ,A (B0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL ,A (B ,A (BM09 ,A (B ,A (B 27D9041D
>> > ASL ,A (B00000061)
>> > [ ,A (B ,A (B0.000000] ACPI: DSDT 3d392400 06857 (v02 INT430 SYSFexxx 00001001
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.000000] ACPI: FACS 3d3a0c00 00040
>> > [ ,A (B ,A (B0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL ,A (B ,A (BM09 ,A (B ,A (B 00000001
>> > ASL ,A (B00000061)
>> > [ ,A (B ,A (B0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL ,A (B ,A (BM09 ,A (B ,A (B 27D9041D
>> > ASL ,A (B00000061)
>> > [ ,A (B ,A (B0.000000] ACPI: APIC 3d392000 00068 (v01 DELL ,A (B ,A (BM09 ,A (B ,A (B 27D9041D
>> > ASL ,A (B00000047)
>> > [ ,A (B ,A (B0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL ,A (B ,A (BM09 ,A (B ,A (B 27D9041D
>> > ASL ,A (B00000061)
>> > [ ,A (B ,A (B0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL ,A (B ,A (BM09 ,A (B ,A (B 27D9041D
>> > ASL ,A (B00000061)
>> > [ ,A (B ,A (B0.000000] ACPI: TCPA 3d392300 00032 (v01 ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B 00000000
>> > ASL ,A (B00000000)
>> > [ ,A (B ,A (B0.000000] ACPI: SSDT 3d3902e7 0066C (v01 ,A (BPmRef ,A (B ,A (BCpuPm 00003000
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.000000] ACPI: Local APIC address 0xfee00000
>> > [ ,A (B ,A (B0.000000] 91MB HIGHMEM available.
>> > [ ,A (B ,A (B0.000000] 887MB LOWMEM available.
>> > [ ,A (B ,A (B0.000000] ,A (B mapped low ram: 0 - 377fe000
>> > [ ,A (B ,A (B0.000000] ,A (B low ram: 0 - 377fe000
>> > [ ,A (B ,A (B0.000000] ,A (B node 0 low ram: 00000000 - 377fe000
>> > [ ,A (B ,A (B0.000000] ,A (B node 0 bootmap 00008000 - 0000ef00
>> > [ ,A (B ,A (B0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
>> > [ ,A (B ,A (B0.000000] ,A (B #0 [0000000000 - 0000001000] ,A (B BIOS data page ==>
>> > [0000000000 - 0000001000]
>> > [ ,A (B ,A (B0.000000] ,A (B #1 [0000001000 - 0000002000] ,A (B ,A (BEX TRAMPOLINE ==>
>> > [0000001000 - 0000002000]
>> > [ ,A (B ,A (B0.000000] ,A (B #2 [0000006000 - 0000007000] ,A (B ,A (B ,A (B TRAMPOLINE ==>
>> > [0000006000 - 0000007000]
>> > [ ,A (B ,A (B0.000000] ,A (B #3 [0001000000 - 0001c1ed78] ,A (B ,A (BTEXT DATA BSS ==>
>> > [0001000000 - 0001c1ed78]
>> > [ ,A (B ,A (B0.000000] ,A (B #4 [000009f000 - 0000100000] ,A (B ,A (BBIOS reserved ==>
>> > [000009f000 - 0000100000]
>> > [ ,A (B ,A (B0.000000] ,A (B #5 [0001c1f000 - 0001c27184] ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B ,A (BBRK ==>
>> > [0001c1f000 - 0001c27184]
>> > [ ,A (B ,A (B0.000000] ,A (B #6 [0000002000 - 0000006000] ,A (B ,A (B ,A (BACPI WAKEUP ==>
>> > [0000002000 - 0000006000]
>> > [ ,A (B ,A (B0.000000] ,A (B #7 [0000007000 - 0000008000] ,A (B ,A (B ,A (B ,A (B ,A (BPGTABLE ==>
>> > [0000007000 - 0000008000]
>> > [ ,A (B ,A (B0.000000] ,A (B #8 [0000008000 - 000000f000] ,A (B ,A (B ,A (B ,A (B ,A (BBOOTMAP ==>
>> > [0000008000 - 000000f000]
>> > [ ,A (B ,A (B0.000000] sizeof(struct page) = 32
>> > [ ,A (B ,A (B0.000000] Zone PFN ranges:
>> > [ ,A (B ,A (B0.000000] ,A (B DMA ,A (B ,A (B ,A (B0x00000000 -> 0x00001000
>> > [ ,A (B ,A (B0.000000] ,A (B Normal ,A (B 0x00001000 -> 0x000377fe
>> > [ ,A (B ,A (B0.000000] ,A (B HighMem ,A (B0x000377fe -> 0x0003d38d
>> > [ ,A (B ,A (B0.000000] Movable zone start PFN for each node
>> > [ ,A (B ,A (B0.000000] early_node_map[2] active PFN ranges
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B 0: 0x00000000 -> 0x0000009f
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B 0: 0x00000100 -> 0x0003d38d
>> > [ ,A (B ,A (B0.000000] On node 0 totalpages: 250668
>> > [ ,A (B ,A (B0.000000] Node 0 memmap at 0xc1c29000 size 8028160 first pfn 0xc1c29000
>> > [ ,A (B ,A (B0.000000] free_area_init_node: node 0, pgdat c162db40,
>> > node_mem_map c1c29000
>> > [ ,A (B ,A (B0.000000] ,A (B DMA zone: 32 pages used for memmap
>> > [ ,A (B ,A (B0.000000] ,A (B DMA zone: 0 pages reserved
>> > [ ,A (B ,A (B0.000000] ,A (B DMA zone: 3967 pages, LIFO batch:0
>> > [ ,A (B ,A (B0.000000] ,A (B Normal zone: 1744 pages used for memmap
>> > [ ,A (B ,A (B0.000000] ,A (B Normal zone: 221486 pages, LIFO batch:31
>> > [ ,A (B ,A (B0.000000] ,A (B HighMem zone: 184 pages used for memmap
>> > [ ,A (B ,A (B0.000000] ,A (B HighMem zone: 23255 pages, LIFO batch:3
>> > [ ,A (B ,A (B0.000000] Using APIC driver default
>> > [ ,A (B ,A (B0.000000] ACPI: PM-Timer IO Port: 0x1008
>> > [ ,A (B ,A (B0.000000] ACPI: Local APIC address 0xfee00000
>> > [ ,A (B ,A (B0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> > [ ,A (B ,A (B0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> > [ ,A (B ,A (B0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> > [ ,A (B ,A (B0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> > [ ,A (B ,A (B0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> > [ ,A (B ,A (B0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>> > [ ,A (B ,A (B0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> > [ ,A (B ,A (B0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> > [ ,A (B ,A (B0.000000] ACPI: IRQ0 used by override.
>> > [ ,A (B ,A (B0.000000] ACPI: IRQ2 used by override.
>> > [ ,A (B ,A (B0.000000] ACPI: IRQ9 used by override.
>> > [ ,A (B ,A (B0.000000] Enabling APIC mode: ,A (BFlat. ,A (BUsing 1 I/O APICs
>> > [ ,A (B ,A (B0.000000] Using ACPI (MADT) for SMP configuration information
>> > [ ,A (B ,A (B0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> > [ ,A (B ,A (B0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> > [ ,A (B ,A (B0.000000] nr_irqs_gsi: 24
>> > [ ,A (B ,A (B0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>> > [ ,A (B ,A (B0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>> > [ ,A (B ,A (B0.000000] Allocating PCI resources starting at 40000000 (gap:
>> > 40000000:b8000000)
>> > [ ,A (B ,A (B0.000000] Booting paravirtualized kernel on bare hardware
>> > [ ,A (B ,A (B0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>> > [ ,A (B ,A (B0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s33048 r0 d24296 u2097152
>> > [ ,A (B ,A (B0.000000] pcpu-alloc: s33048 r0 d24296 u2097152 alloc=1*4194304
>> > [ ,A (B ,A (B0.000000] pcpu-alloc: [0] 0 1
>> > [ ,A (B ,A (B0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> > Total pages: 248708
>> > [ ,A (B ,A (B0.000000] Kernel command line: BOOT_IMAGE=mm ro root=802
>> > vt.default_utf8=0 resume=/dev/sda8
>> > [ ,A (B ,A (B0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>> > [ ,A (B ,A (B0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> > [ ,A (B ,A (B0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> > [ ,A (B ,A (B0.000000] Enabling fast FPU save and restore... done.
>> > [ ,A (B ,A (B0.000000] Enabling unmasked SIMD FPU exception support... done.
>> > [ ,A (B ,A (B0.000000] Initializing CPU#0
>> > [ ,A (B ,A (B0.000000] Initializing HighMem for node 0 (000377fe:0003d38d)
>> > [ ,A (B ,A (B0.000000] Memory: 980956k/1003060k available (3904k kernel code,
>> > 21272k reserved, 2488k data, 408k init, 93756k highmem)
>> > [ ,A (B ,A (B0.000000] virtual kernel memory layout:
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B fixmap ,A (B: 0xfff90000 - 0xfffff000 ,A (B ( 444 kB)
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B pkmap ,A (B : 0xff800000 - 0xffc00000 ,A (B (4096 kB)
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B vmalloc : 0xf7ffe000 - 0xff7fe000 ,A (B ( 120 MB)
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B lowmem ,A (B: 0xc0000000 - 0xf77fe000 ,A (B ( 887 MB)
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B ,A (B .init : 0xc163f000 - 0xc16a5000 ,A (B ( 408 kB)
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B ,A (B .data : 0xc13d0244 - 0xc163e5a0 ,A (B (2488 kB)
>> > [ ,A (B ,A (B0.000000] ,A (B ,A (B ,A (B .text : 0xc1000000 - 0xc13d0244 ,A (B (3904 kB)
>> > [ ,A (B ,A (B0.000000] Checking if this processor honours the WP bit even in
>> > supervisor mode...Ok.
>> > [ ,A (B ,A (B0.000000] Hierarchical RCU implementation.
>> > [ ,A (B ,A (B0.000000] NR_IRQS:320
>> > [ ,A (B ,A (B0.000000] Extended CMOS year: 2000
>> > [ ,A (B ,A (B0.000000] Console: colour dummy device 80x25
>> > [ ,A (B ,A (B0.000000] console [tty0] enabled
>> > [ ,A (B ,A (B0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
>> > Inc., Ingo Molnar
>> > [ ,A (B ,A (B0.000000] ... MAX_LOCKDEP_SUBCLASSES: ,A (B8
>> > [ ,A (B ,A (B0.000000] ... MAX_LOCK_DEPTH: ,A (B ,A (B ,A (B ,A (B ,A (B48
>> > [ ,A (B ,A (B0.000000] ... MAX_LOCKDEP_KEYS: ,A (B ,A (B ,A (B ,A (B8191
>> > [ ,A (B ,A (B0.000000] ... CLASSHASH_SIZE: ,A (B ,A (B ,A (B ,A (B ,A (B4096
>> > [ ,A (B ,A (B0.000000] ... MAX_LOCKDEP_ENTRIES: ,A (B ,A (B 16384
>> > [ ,A (B ,A (B0.000000] ... MAX_LOCKDEP_CHAINS: ,A (B ,A (B ,A (B32768
>> > [ ,A (B ,A (B0.000000] ... CHAINHASH_SIZE: ,A (B ,A (B ,A (B ,A (B ,A (B16384
>> > [ ,A (B ,A (B0.000000] ,A (Bmemory used by lock dependency info: 3567 kB
>> > [ ,A (B ,A (B0.000000] ,A (Bper task-struct memory footprint: 1152 bytes
>> > [ ,A (B ,A (B0.000000] hpet clockevent registered
>> > [ ,A (B ,A (B0.000000] Fast TSC calibration using PIT
>> > [ ,A (B ,A (B0.000000] Detected 1995.100 MHz processor.
>> > [ ,A (B ,A (B0.003349] Calibrating delay loop (skipped), value calculated
>> > using timer frequency.. 3991.45 BogoMIPS (lpj=6650333)
>> > [ ,A (B ,A (B0.003611] Security Framework initialized
>> > [ ,A (B ,A (B0.003717] Mount-cache hash table entries: 512
>> > [ ,A (B ,A (B0.006964] Initializing cgroup subsys ns
>> > [ ,A (B ,A (B0.006972] Initializing cgroup subsys cpuacct
>> > [ ,A (B ,A (B0.007103] CPU: Physical Processor ID: 0
>> > [ ,A (B ,A (B0.007108] CPU: Processor Core ID: 0
>> > [ ,A (B ,A (B0.007114] using mwait in idle threads.
>> > [ ,A (B ,A (B0.007122] Performance Events: Core2 events, Intel PMU driver.
>> > [ ,A (B ,A (B0.007153] ... version: ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B2
>> > [ ,A (B ,A (B0.007158] ... bit width: ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B40
>> > [ ,A (B ,A (B0.007163] ... generic registers: ,A (B ,A (B ,A (B2
>> > [ ,A (B ,A (B0.007168] ... value mask: ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B 000000ffffffffff
>> > [ ,A (B ,A (B0.007173] ... max period: ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B 000000007fffffff
>> > [ ,A (B ,A (B0.007179] ... fixed-purpose events: ,A (B 3
>> > [ ,A (B ,A (B0.007184] ... event mask: ,A (B ,A (B ,A (B ,A (B ,A (B ,A (B 0000000700000003
>> > [ ,A (B ,A (B0.007199] Checking 'hlt' instruction... OK.
>> > [ ,A (B ,A (B0.021587] ACPI: Core revision 20091112
>> > [ ,A (B ,A (B0.043974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> > [ ,A (B ,A (B0.079689] CPU0: Intel(R) Core(TM)2 Duo CPU ,A (B ,A (B T7250 ,A (B@ 2.00GHz stepping 0d
>> > [ ,A (B ,A (B0.079999] lockdep: fixing up alternatives.
>> > [ ,A (B ,A (B0.079999] Booting processor 1 APIC 0x1 ip 0x6000
>> > [ ,A (B ,A (B0.079999] Initializing CPU#1
>> > [ ,A (B ,A (B0.079999] CPU: Physical Processor ID: 0
>> > [ ,A (B ,A (B0.079999] CPU: Processor Core ID: 1
>> > [ ,A (B ,A (B0.170015] CPU1: Intel(R) Core(TM)2 Duo CPU ,A (B ,A (B T7250 ,A (B@ 2.00GHz stepping 0d
>> > [ ,A (B ,A (B0.173386] Brought up 2 CPUs
>> > [ ,A (B ,A (B0.173393] Total of 2 processors activated (7983.61 BogoMIPS).
>> > [ ,A (B ,A (B0.175046] khelper used greatest stack depth: 6928 bytes left
>> > [ ,A (B ,A (B0.175046] regulator: core version 0.5
>> > [ ,A (B ,A (B0.176722] Time: 15:30:08 ,A (BDate: 12/10/09
>> > [ ,A (B ,A (B0.176823] khelper used greatest stack depth: 6728 bytes left
>> > [ ,A (B ,A (B0.176984] NET: Registered protocol family 16
>> > [ ,A (B ,A (B0.180083] ACPI: bus type pci registered
>> > [ ,A (B ,A (B0.180201] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
>> > 0xf8000000-0xfbffffff] (base 0xf8000000)
>> > [ ,A (B ,A (B0.180201] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>> > [ ,A (B ,A (B0.180201] PCI: Using MMCONFIG for extended config space
>> > [ ,A (B ,A (B0.180201] PCI: Using configuration type 1 for base access
>> > [ ,A (B ,A (B0.203625] bio: create slab <bio-0> at 0
>> > [ ,A (B ,A (B0.213198] ACPI: EC: Look up EC in DSDT
>> > [ ,A (B ,A (B0.213825] ACPI: BIOS _OSI(Linux) query ignored
>> > [ ,A (B ,A (B0.276349] ACPI: SSDT 3d3a0c80 00043 (v01 ,A (BLMPWR ,A (BDELLLOM 00001001
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.323792] ACPI: Interpreter enabled
>> > [ ,A (B ,A (B0.323804] ACPI: (supports S0 S3 S4 S5)
>> > [ ,A (B ,A (B0.323895] ACPI: Using IOAPIC for interrupt routing
>> > [ ,A (B ,A (B0.490535] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
>> > [ ,A (B ,A (B0.493757] ACPI: No dock devices found.
>> > [ ,A (B ,A (B0.529913] ACPI: PCI Root Bridge [PCI0] (0000:00)
>> > [ ,A (B ,A (B0.530130] pci_root PNP0A03:00: ignoring host bridge windows from
>> > ACPI; boot with "pci=use_crs" to use them
>> > [ ,A (B ,A (B0.600625] pci_root PNP0A03:00: host bridge window [io
>> > 0x0000-0x0cf7] (ignored)
>> > [ ,A (B ,A (B0.600630] pci_root PNP0A03:00: host bridge window [io
>> > 0x0d00-0xffff] (ignored)
>> > [ ,A (B ,A (B0.600634] pci_root PNP0A03:00: host bridge window [mem
>> > 0x000a0000-0x000bffff] (ignored)
>> > [ ,A (B ,A (B0.600637] pci_root PNP0A03:00: host bridge window [mem
>> > 0x000d0000-0x000dffff] (ignored)
>> > [ ,A (B ,A (B0.600641] pci_root PNP0A03:00: host bridge window [mem
>> > 0x40000000-0xf7ffffff] (ignored)
>> > [ ,A (B ,A (B0.600645] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfc000000-0xfebfffff] (ignored)
>> > [ ,A (B ,A (B0.600648] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfec10000-0xfecfffff] (ignored)
>> > [ ,A (B ,A (B0.600652] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfed1c000-0xfed1ffff] (ignored)
>> > [ ,A (B ,A (B0.600656] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfed90000-0xfed9ffff] (ignored)
>> > [ ,A (B ,A (B0.600659] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfed40000-0xfed44fff] (ignored)
>> > [ ,A (B ,A (B0.600663] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfeda7000-0xfedfffff] (ignored)
>> > [ ,A (B ,A (B0.600667] pci_root PNP0A03:00: host bridge window [mem
>> > 0xfee10000-0xff9fffff] (ignored)
>> > [ ,A (B ,A (B0.600670] pci_root PNP0A03:00: host bridge window [mem
>> > 0xffb80000-0xffe7ffff] (ignored)
>> > [ ,A (B ,A (B0.600882] pci 0000:00:02.0: reg 10: [mem 0xf6c00000-0xf6ffffff 64bit]
>> > [ ,A (B ,A (B0.600897] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
>> > [ ,A (B ,A (B0.600906] pci 0000:00:02.0: reg 20: [io ,A (B0xefe8-0xefef]
>> > [ ,A (B ,A (B0.600999] pci 0000:00:02.1: reg 10: [mem 0xf6b00000-0xf6bfffff 64bit]
>> > [ ,A (B ,A (B0.601223] pci 0000:00:1a.0: reg 20: [io ,A (B0x6f60-0x6f7f]
>> > [ ,A (B ,A (B0.601374] pci 0000:00:1a.1: reg 20: [io ,A (B0x6f80-0x6f9f]
>> > [ ,A (B ,A (B0.601525] pci 0000:00:1a.2: reg 20: [io ,A (B0x6fa0-0x6fbf]
>> > [ ,A (B ,A (B0.601673] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
>> > [ ,A (B ,A (B0.601783] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.601791] pci 0000:00:1a.7: PME# disabled
>> > [ ,A (B ,A (B0.601875] pci 0000:00:1b.0: reg 10: [mem 0xf6afc000-0xf6afffff 64bit]
>> > [ ,A (B ,A (B0.601974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.601981] pci 0000:00:1b.0: PME# disabled
>> > [ ,A (B ,A (B0.602144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.602151] pci 0000:00:1c.0: PME# disabled
>> > [ ,A (B ,A (B0.602322] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.602329] pci 0000:00:1c.1: PME# disabled
>> > [ ,A (B ,A (B0.602501] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.602509] pci 0000:00:1c.4: PME# disabled
>> > [ ,A (B ,A (B0.602629] pci 0000:00:1d.0: reg 20: [io ,A (B0x6f00-0x6f1f]
>> > [ ,A (B ,A (B0.602783] pci 0000:00:1d.1: reg 20: [io ,A (B0x6f20-0x6f3f]
>> > [ ,A (B ,A (B0.602934] pci 0000:00:1d.2: reg 20: [io ,A (B0x6f40-0x6f5f]
>> > [ ,A (B ,A (B0.603078] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
>> > [ ,A (B ,A (B0.603187] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.603195] pci 0000:00:1d.7: PME# disabled
>> > [ ,A (B ,A (B0.603580] pci 0000:00:1f.2: reg 10: [io ,A (B0x6e70-0x6e77]
>> > [ ,A (B ,A (B0.603592] pci 0000:00:1f.2: reg 14: [io ,A (B0x6e78-0x6e7b]
>> > [ ,A (B ,A (B0.603604] pci 0000:00:1f.2: reg 18: [io ,A (B0x6e80-0x6e87]
>> > [ ,A (B ,A (B0.603616] pci 0000:00:1f.2: reg 1c: [io ,A (B0x6e88-0x6e8b]
>> > [ ,A (B ,A (B0.603628] pci 0000:00:1f.2: reg 20: [io ,A (B0x6ea0-0x6eaf]
>> > [ ,A (B ,A (B0.603640] pci 0000:00:1f.2: reg 24: [io ,A (B0x6e90-0x6e9f]
>> > [ ,A (B ,A (B0.603762] pci 0000:00:1f.3: reg 10: [mem 0xf6afbf00-0xf6afbfff 64bit]
>> > [ ,A (B ,A (B0.603793] pci 0000:00:1f.3: reg 20: [io ,A (B0x1100-0x111f]
>> > [ ,A (B ,A (B0.603905] pci 0000:00:1f.5: reg 10: [io ,A (B0x6eb0-0x6eb7]
>> > [ ,A (B ,A (B0.603917] pci 0000:00:1f.5: reg 14: [io ,A (B0x6eb8-0x6ebb]
>> > [ ,A (B ,A (B0.603929] pci 0000:00:1f.5: reg 18: [io ,A (B0x6ec0-0x6ec7]
>> > [ ,A (B ,A (B0.603941] pci 0000:00:1f.5: reg 1c: [io ,A (B0x6ec8-0x6ecb]
>> > [ ,A (B ,A (B0.603953] pci 0000:00:1f.5: reg 20: [io ,A (B0x6ee0-0x6eef]
>> > [ ,A (B ,A (B0.603965] pci 0000:00:1f.5: reg 24: [io ,A (B0xeff0-0xefff]
>> > [ ,A (B ,A (B0.604140] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
>> > [ ,A (B ,A (B0.604519] pci 0000:0c:00.0: reg 10: [mem 0xf69fc000-0xf69fffff 64bit]
>> > [ ,A (B ,A (B0.604778] pci 0000:0c:00.0: supports D1 D2
>> > [ ,A (B ,A (B0.604781] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>> > [ ,A (B ,A (B0.604796] pci 0000:0c:00.0: PME# disabled
>> > [ ,A (B ,A (B0.604958] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
>> > [ ,A (B ,A (B0.604974] pci 0000:00:1c.1: ,A (B bridge window [mem 0xf6900000-0xf69fffff]
>> > [ ,A (B ,A (B0.605134] pci 0000:09:00.0: reg 10: [mem 0xf68f0000-0xf68fffff 64bit]
>> > [ ,A (B ,A (B0.605282] pci 0000:09:00.0: PME# supported from D3hot D3cold
>> > [ ,A (B ,A (B0.605291] pci 0000:09:00.0: PME# disabled
>> > [ ,A (B ,A (B0.605402] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
>> > [ ,A (B ,A (B0.605418] pci 0000:00:1c.4: ,A (B bridge window [mem 0xf6800000-0xf68fffff]
>> > [ ,A (B ,A (B0.605503] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
>> > [ ,A (B ,A (B0.605541] pci 0000:02:01.0: supports D1 D2
>> > [ ,A (B ,A (B0.605544] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>> > [ ,A (B ,A (B0.605552] pci 0000:02:01.0: PME# disabled
>> > [ ,A (B ,A (B0.605617] pci 0000:02:01.1: reg 10: [mem 0xf67ff800-0xf67fffff]
>> > [ ,A (B ,A (B0.605711] pci 0000:02:01.1: supports D1 D2
>> > [ ,A (B ,A (B0.605714] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>> > [ ,A (B ,A (B0.605721] pci 0000:02:01.1: PME# disabled
>> > [ ,A (B ,A (B0.605790] pci 0000:02:01.2: reg 10: [mem 0xf67ff700-0xf67ff7ff]
>> > [ ,A (B ,A (B0.605884] pci 0000:02:01.2: supports D1 D2
>> > [ ,A (B ,A (B0.605887] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>> > [ ,A (B ,A (B0.605895] pci 0000:02:01.2: PME# disabled
>> > [ ,A (B ,A (B0.606011] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
>> > [ ,A (B ,A (B0.606028] pci 0000:00:1e.0: ,A (B bridge window [mem 0xf6700000-0xf67fffff]
>> > [ ,A (B ,A (B0.606075] pci_bus 0000:03: [bus 03-06] partially hidden behind
>> > transparent bridge 0000:02 [bus 02-03]
>> > [ ,A (B ,A (B0.606125] pci_bus 0000:00: on NUMA node 0
>> > [ ,A (B ,A (B0.606134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> > [ ,A (B ,A (B0.607778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>> > [ ,A (B ,A (B0.608386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>> > [ ,A (B ,A (B0.608653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>> > [ ,A (B ,A (B0.608946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>> > [ ,A (B ,A (B0.667029] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
>> > [ ,A (B ,A (B0.667370] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
>> > [ ,A (B ,A (B0.667708] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
>> > [ ,A (B ,A (B0.668044] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
>> > [ ,A (B ,A (B0.668382] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> > [ ,A (B ,A (B0.670294] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>> > [ ,A (B ,A (B0.670639] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> > [ ,A (B ,A (B0.670927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
>> > 12 14 15) *0, disabled.
>> > [ ,A (B ,A (B0.671151] vgaarb: device added:
>> > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> > [ ,A (B ,A (B0.671151] vgaarb: loaded
>> > [ ,A (B ,A (B0.673347] SCSI subsystem initialized
>> > [ ,A (B ,A (B0.673534] libata version 3.00 loaded.
>> > [ ,A (B ,A (B0.673633] usbcore: registered new interface driver usbfs
>> > [ ,A (B ,A (B0.673633] usbcore: registered new interface driver hub
>> > [ ,A (B ,A (B0.673633] usbcore: registered new device driver usb
>> > [ ,A (B ,A (B0.673697] PCI: Using ACPI for IRQ routing
>> > [ ,A (B ,A (B0.673697] PCI: pci_cache_line_size set to 64 bytes
>> > [ ,A (B ,A (B0.677479] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>> > [ ,A (B ,A (B0.677479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>> > [ ,A (B ,A (B0.677479] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>> > [ ,A (B ,A (B0.686678] Switching to clocksource tsc
>> > [ ,A (B ,A (B0.698122] pnp: PnP ACPI init
>> > [ ,A (B ,A (B0.698167] ACPI: bus type pnp registered
>> > [ ,A (B ,A (B0.810987] pnp: PnP ACPI: found 13 devices
>> > [ ,A (B ,A (B0.810996] ACPI: ACPI bus type pnp unregistered
>> > [ ,A (B ,A (B0.811028] system 00:05: [io ,A (B0x0c80-0x0caf] has been reserved
>> > [ ,A (B ,A (B0.811038] system 00:05: [io ,A (B0x0cc0-0x0cff] could not be reserved
>> > [ ,A (B ,A (B0.811062] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
>> > [ ,A (B ,A (B0.811085] system 00:09: [io ,A (B0x0cb0-0x0cbb] has been reserved
>> > [ ,A (B ,A (B0.811104] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
>> > [ ,A (B ,A (B0.811126] system 00:0a: [io ,A (B0x0900-0x092f] has been reserved
>> > [ ,A (B ,A (B0.811135] system 00:0a: [io ,A (B0x0931-0x0933] has been reserved
>> > [ ,A (B ,A (B0.811144] system 00:0a: [io ,A (B0x0935-0x097f] has been reserved
>> > [ ,A (B ,A (B0.811152] system 00:0a: [io ,A (B0x04d0-0x04d1] has been reserved
>> > [ ,A (B ,A (B0.811161] system 00:0a: [io ,A (B0x1000-0x1005] has been reserved
>> > [ ,A (B ,A (B0.811170] system 00:0a: [io ,A (B0x1008-0x100f] has been reserved
>> > [ ,A (B ,A (B0.811192] system 00:0b: [io ,A (B0xf400-0xf4fe] has been reserved
>> > [ ,A (B ,A (B0.811201] system 00:0b: [io ,A (B0x1006-0x1007] has been reserved
>> > [ ,A (B ,A (B0.811211] system 00:0b: [io ,A (B0x100a-0x1059] could not be reserved
>> > [ ,A (B ,A (B0.811219] system 00:0b: [io ,A (B0x1060-0x107f] has been reserved
>> > [ ,A (B ,A (B0.811228] system 00:0b: [io ,A (B0x1080-0x10bf] has been reserved
>> > [ ,A (B ,A (B0.811236] system 00:0b: [io ,A (B0x1100-0x111f] has been reserved
>> > [ ,A (B ,A (B0.811245] system 00:0b: [io ,A (B0x1010-0x102f] has been reserved
>> > [ ,A (B ,A (B0.811253] system 00:0b: [io ,A (B0x0809] has been reserved
>> > [ ,A (B ,A (B0.811276] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved
>> > [ ,A (B ,A (B0.811287] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved
>> > [ ,A (B ,A (B0.811297] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
>> > [ ,A (B ,A (B0.811307] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
>> > [ ,A (B ,A (B0.811318] system 00:0c: [mem 0x00100000-0x3d38d3ff] could not be reserved
>> > [ ,A (B ,A (B0.811328] system 00:0c: [mem 0x3d38d400-0x3dafffff] could not be reserved
>> > [ ,A (B ,A (B0.811338] system 00:0c: [mem 0x3db00000-0x3dbfffff] has been reserved
>> > [ ,A (B ,A (B0.811347] system 00:0c: [mem 0xffe80000-0xffffffff] has been reserved
>> > [ ,A (B ,A (B0.811356] system 00:0c: [mem 0xffa00000-0xffb7ffff] has been reserved
>> > [ ,A (B ,A (B0.811366] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved
>> > [ ,A (B ,A (B0.811376] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved
>> > [ ,A (B ,A (B0.811385] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
>> > [ ,A (B ,A (B0.811394] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
>> > [ ,A (B ,A (B0.811403] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved
>> > [ ,A (B ,A (B0.811413] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved
>> > [ ,A (B ,A (B0.811423] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved
>> > [ ,A (B ,A (B0.811432] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved
>> > [ ,A (B ,A (B0.811441] system 00:0c: [mem 0xfed1c800-0xfed1cfff] has been reserved
>> > [ ,A (B ,A (B0.811451] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved
>> > [ ,A (B ,A (B0.811460] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
>> > [ ,A (B ,A (B0.848952] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17
>> > (level, low) -> IRQ 17
>> > [ ,A (B ,A (B0.848977] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
>> > [ ,A (B ,A (B0.863385] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
>> > [ ,A (B ,A (B0.863405] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F,
>> > vendor 0x4243)
>> > [ ,A (B ,A (B0.863425] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
>> > [ ,A (B ,A (B0.863445] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
>> > [ ,A (B ,A (B0.879792] ssb: Found rev 1 PMU (capabilities 0x02A62F01)
>> > [ ,A (B ,A (B0.889038] ssb: SPROM revision 8 detected.
>> > [ ,A (B ,A (B0.903507] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
>> > [ ,A (B ,A (B0.903853] pci 0000:00:1e.0: BAR 9: assigned [mem
>> > 0x40000000-0x43ffffff pref]
>> > [ ,A (B ,A (B0.903864] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff]
>> > [ ,A (B ,A (B0.903873] pci 0000:00:1c.0: BAR 9: assigned [mem
>> > 0x44200000-0x443fffff 64bit pref]
>> > [ ,A (B ,A (B0.903883] pci 0000:00:1c.1: BAR 9: assigned [mem
>> > 0x44400000-0x445fffff 64bit pref]
>> > [ ,A (B ,A (B0.903893] pci 0000:00:1c.4: BAR 9: assigned [mem
>> > 0x44600000-0x447fffff 64bit pref]
>> > [ ,A (B ,A (B0.903903] pci 0000:00:1c.0: BAR 7: assigned [io ,A (B0x2000-0x2fff]
>> > [ ,A (B ,A (B0.903911] pci 0000:00:1c.1: BAR 7: assigned [io ,A (B0x3000-0x3fff]
>> > [ ,A (B ,A (B0.903919] pci 0000:00:1c.4: BAR 7: assigned [io ,A (B0x4000-0x4fff]
>> > [ ,A (B ,A (B0.903927] pci 0000:00:1e.0: BAR 7: assigned [io ,A (B0x5000-0x5fff]
>> > [ ,A (B ,A (B0.903935] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
>> > [ ,A (B ,A (B0.903944] pci 0000:00:1c.0: ,A (B bridge window [io ,A (B0x2000-0x2fff]
>> > [ ,A (B ,A (B0.903958] pci 0000:00:1c.0: ,A (B bridge window [mem 0x44000000-0x441fffff]
>> > [ ,A (B ,A (B0.903970] pci 0000:00:1c.0: ,A (B bridge window [mem
>> > 0x44200000-0x443fffff 64bit pref]
>> > [ ,A (B ,A (B0.903987] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
>> > [ ,A (B ,A (B0.903996] pci 0000:00:1c.1: ,A (B bridge window [io ,A (B0x3000-0x3fff]
>> > [ ,A (B ,A (B0.904009] pci 0000:00:1c.1: ,A (B bridge window [mem 0xf6900000-0xf69fffff]
>> > [ ,A (B ,A (B0.904021] pci 0000:00:1c.1: ,A (B bridge window [mem
>> > 0x44400000-0x445fffff 64bit pref]
>> > [ ,A (B ,A (B0.904038] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
>> > [ ,A (B ,A (B0.904047] pci 0000:00:1c.4: ,A (B bridge window [io ,A (B0x4000-0x4fff]
>> > [ ,A (B ,A (B0.904061] pci 0000:00:1c.4: ,A (B bridge window [mem 0xf6800000-0xf68fffff]
>> > [ ,A (B ,A (B0.904073] pci 0000:00:1c.4: ,A (B bridge window [mem
>> > 0x44600000-0x447fffff 64bit pref]
>> > [ ,A (B ,A (B0.904094] pci 0000:02:01.0: BAR 9: assigned [mem
>> > 0x40000000-0x43ffffff pref]
>> > [ ,A (B ,A (B0.904105] pci 0000:02:01.0: BAR 10: assigned [mem 0x48000000-0x4bffffff]
>> > [ ,A (B ,A (B0.904113] pci 0000:02:01.0: BAR 0: assigned [mem 0xf6700000-0xf6700fff]
>> > [ ,A (B ,A (B0.904126] pci 0000:02:01.0: BAR 0: set to [mem
>> > 0xf6700000-0xf6700fff] (PCI address [0xf6700000-0xf6700fff]
>> > [ ,A (B ,A (B0.904137] pci 0000:02:01.0: BAR 7: assigned [io ,A (B0x5000-0x50ff]
>> > [ ,A (B ,A (B0.904145] pci 0000:02:01.0: BAR 8: assigned [io ,A (B0x5100-0x51ff]
>> > [ ,A (B ,A (B0.904152] pci 0000:02:01.0: CardBus bridge to [bus 03-06]
>> > [ ,A (B ,A (B0.904159] pci 0000:02:01.0: ,A (B bridge window [io ,A (B0x5000-0x50ff]
>> > [ ,A (B ,A (B0.904170] pci 0000:02:01.0: ,A (B bridge window [io ,A (B0x5100-0x51ff]
>> > [ ,A (B ,A (B0.904182] pci 0000:02:01.0: ,A (B bridge window [mem
>> > 0x40000000-0x43ffffff pref]
>> > [ ,A (B ,A (B0.904194] pci 0000:02:01.0: ,A (B bridge window [mem 0x48000000-0x4bffffff]
>> > [ ,A (B ,A (B0.904206] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
>> > [ ,A (B ,A (B0.904214] pci 0000:00:1e.0: ,A (B bridge window [io ,A (B0x5000-0x5fff]
>> > [ ,A (B ,A (B0.904228] pci 0000:00:1e.0: ,A (B bridge window [mem 0xf6700000-0xf67fffff]
>> > [ ,A (B ,A (B0.904240] pci 0000:00:1e.0: ,A (B bridge window [mem
>> > 0x40000000-0x43ffffff pref]
>> > [ ,A (B ,A (B0.904273] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> > [ ,A (B ,A (B0.904285] pci 0000:00:1c.0: setting latency timer to 64
>> > [ ,A (B ,A (B0.904302] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>> > [ ,A (B ,A (B0.904314] pci 0000:00:1c.1: setting latency timer to 64
>> > [ ,A (B ,A (B0.904330] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> > [ ,A (B ,A (B0.904342] pci 0000:00:1c.4: setting latency timer to 64
>> > [ ,A (B ,A (B0.904355] pci 0000:00:1e.0: setting latency timer to 64
>> > [ ,A (B ,A (B0.904375] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> > [ ,A (B ,A (B0.904388] pci_bus 0000:00: resource 0 [io ,A (B0x0000-0xffff]
>> > [ ,A (B ,A (B0.904392] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>> > [ ,A (B ,A (B0.904395] pci_bus 0000:0b: resource 0 [io ,A (B0x2000-0x2fff]
>> > [ ,A (B ,A (B0.904398] pci_bus 0000:0b: resource 1 [mem 0x44000000-0x441fffff]
>> > [ ,A (B ,A (B0.904402] pci_bus 0000:0b: resource 2 [mem 0x44200000-0x443fffff
>> > 64bit pref]
>> > [ ,A (B ,A (B0.904405] pci_bus 0000:0c: resource 0 [io ,A (B0x3000-0x3fff]
>> > [ ,A (B ,A (B0.904408] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff]
>> > [ ,A (B ,A (B0.904412] pci_bus 0000:0c: resource 2 [mem 0x44400000-0x445fffff
>> > 64bit pref]
>> > [ ,A (B ,A (B0.904415] pci_bus 0000:09: resource 0 [io ,A (B0x4000-0x4fff]
>> > [ ,A (B ,A (B0.904418] pci_bus 0000:09: resource 1 [mem 0xf6800000-0xf68fffff]
>> > [ ,A (B ,A (B0.904422] pci_bus 0000:09: resource 2 [mem 0x44600000-0x447fffff
>> > 64bit pref]
>> > [ ,A (B ,A (B0.904425] pci_bus 0000:02: resource 0 [io ,A (B0x5000-0x5fff]
>> > [ ,A (B ,A (B0.904428] pci_bus 0000:02: resource 1 [mem 0xf6700000-0xf67fffff]
>> > [ ,A (B ,A (B0.904432] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref]
>> > [ ,A (B ,A (B0.904435] pci_bus 0000:02: resource 3 [io ,A (B0x0000-0xffff]
>> > [ ,A (B ,A (B0.904438] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
>> > [ ,A (B ,A (B0.904441] pci_bus 0000:03: resource 0 [io ,A (B0x5000-0x50ff]
>> > [ ,A (B ,A (B0.904444] pci_bus 0000:03: resource 1 [io ,A (B0x5100-0x51ff]
>> > [ ,A (B ,A (B0.904447] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref]
>> > [ ,A (B ,A (B0.904451] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
>> > [ ,A (B ,A (B0.904632] NET: Registered protocol family 2
>> > [ ,A (B ,A (B0.904933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>> > [ ,A (B ,A (B0.905890] TCP established hash table entries: 131072 (order: 8,
>> > 1048576 bytes)
>> > [ ,A (B ,A (B0.906395] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>> > [ ,A (B ,A (B0.914821] TCP: Hash tables configured (established 131072 bind 65536)
>> > [ ,A (B ,A (B0.914889] TCP reno registered
>> > [ ,A (B ,A (B0.914906] UDP hash table entries: 512 (order: 3, 40960 bytes)
>> > [ ,A (B ,A (B0.915056] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
>> > [ ,A (B ,A (B0.915548] NET: Registered protocol family 1
>> > [ ,A (B ,A (B0.915594] pci 0000:00:02.0: Boot video device
>> > [ ,A (B ,A (B0.916138] PCI: CLS 64 bytes, default 64
>> > [ ,A (B ,A (B0.920703] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
>> > [ ,A (B ,A (B0.920737] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
>> > [ ,A (B ,A (B0.920934] Microcode Update Driver: v2.00
>> > <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
>> > [ ,A (B ,A (B0.921968] audit: initializing netlink socket (disabled)
>> > [ ,A (B ,A (B0.922049] type=2000 audit(1260459007.916:1): initialized
>> > [ ,A (B ,A (B0.930909] highmem bounce pool size: 64 pages
>> > [ ,A (B ,A (B0.930924] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>> > [ ,A (B ,A (B0.931615] VFS: Disk quotas dquot_6.5.2
>> > [ ,A (B ,A (B0.931702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> > [ ,A (B ,A (B0.933146] Btrfs loaded
>> > [ ,A (B ,A (B0.933162] msgmni has been set to 1733
>> > [ ,A (B ,A (B0.934396] alg: No test for stdrng (krng)
>> > [ ,A (B ,A (B0.934614] Block layer SCSI generic (bsg) driver version 0.4
>> > loaded (major 253)
>> > [ ,A (B ,A (B0.934641] io scheduler noop registered
>> > [ ,A (B ,A (B0.934647] io scheduler deadline registered
>> > [ ,A (B ,A (B0.934697] io scheduler cfq registered (default)
>> > [ ,A (B ,A (B0.935545] pcieport 0000:00:1c.0: setting latency timer to 64
>> > [ ,A (B ,A (B0.935634] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>> > [ ,A (B ,A (B0.936286] pcieport 0000:00:1c.1: setting latency timer to 64
>> > [ ,A (B ,A (B0.936377] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>> > [ ,A (B ,A (B0.937034] pcieport 0000:00:1c.4: setting latency timer to 64
>> > [ ,A (B ,A (B0.937118] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
>> > [ ,A (B ,A (B0.938238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> > [ ,A (B ,A (B0.939692] ALI M7101 PMU not found.
>> > [ ,A (B ,A (B0.940148] vesafb: framebuffer at 0xe0000000, mapped to
>> > 0xf8080000, using 3072k, total 32704k
>> > [ ,A (B ,A (B0.940158] vesafb: mode is 1024x768x16, linelength=2048, pages=20
>> > [ ,A (B ,A (B0.940165] vesafb: scrolling: redraw
>> > [ ,A (B ,A (B0.940171] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>> > [ ,A (B ,A (B0.953782] Console: switching to colour frame buffer device 128x48
>> > [ ,A (B ,A (B0.966131] fb0: VESA VGA frame buffer device
>> > [ ,A (B ,A (B0.967114] ACPI: AC Adapter [AC] (on-line)
>> > [ ,A (B ,A (B0.968048] input: Lid Switch as
>> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>> > [ ,A (B ,A (B0.970682] ACPI: Lid Switch [LID]
>> > [ ,A (B ,A (B0.971064] input: Power Button as
>> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>> > [ ,A (B ,A (B0.971270] ACPI: Power Button [PBTN]
>> > [ ,A (B ,A (B0.971668] input: Sleep Button as
>> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>> > [ ,A (B ,A (B0.971869] ACPI: Sleep Button [SBTN]
>> > [ ,A (B ,A (B0.973787] ACPI: SSDT 3d390953 002C3 (v01 ,A (BPmRef ,A (B BspIst 00003000
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.976373] ACPI: SSDT 3d390ded 005C6 (v01 ,A (BPmRef ,A (B BspCst 00003001
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.978792] Monitor-Mwait will be used to enter C-1 state
>> > [ ,A (B ,A (B0.978888] Monitor-Mwait will be used to enter C-2 state
>> > [ ,A (B ,A (B0.978969] Monitor-Mwait will be used to enter C-3 state
>> > [ ,A (B ,A (B0.978985] Marking TSC unstable due to TSC halts in idle
>> > [ ,A (B ,A (B0.979117] Switching to clocksource hpet
>> > [ ,A (B ,A (B0.980233] processor LNXCPU:00: registered as cooling_device0
>> > [ ,A (B ,A (B0.981727] ACPI: SSDT 3d390c16 001D7 (v01 ,A (BPmRef ,A (B ,A (BApIst 00003000
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.984297] ACPI: SSDT 3d3913b3 0008D (v01 ,A (BPmRef ,A (B ,A (BApCst 00003000
>> > INTL 20050624)
>> > [ ,A (B ,A (B0.987470] processor LNXCPU:01: registered as cooling_device1
>> > [ ,A (B ,A (B1.036564] thermal LNXTHERM:01: registered as thermal_zone0
>> > [ ,A (B ,A (B1.036744] ACPI: Thermal Zone [THM] (50 C)
>> > [ ,A (B ,A (B1.057169] Non-volatile memory driver v1.3
>> > [ ,A (B ,A (B1.058010] i8k: unable to get SMM BIOS version
>> > [ ,A (B ,A (B1.058127] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal
>> > Zotto (dz@xxxxxxxxxx)
>> > [ ,A (B ,A (B1.058728] Linux agpgart interface v0.103
>> > [ ,A (B ,A (B1.059781] agpgart-intel 0000:00:00.0: Intel Mobile Intel$(D"n(B GM45
>> > Express Chipset
>> > [ ,A (B ,A (B1.066202] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
>> > [ ,A (B ,A (B1.075474] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>> > [ ,A (B ,A (B1.081183] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
>> > seconds, margin is 60 seconds).
>> > [ ,A (B ,A (B1.086768] Hangcheck: Using get_cycles().
>> > [ ,A (B ,A (B1.092487] [drm] Initialized drm 1.1.0 20060810
>> > [ ,A (B ,A (B1.098041] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> > [ ,A (B ,A (B1.103610] i915 0000:00:02.0: setting latency timer to 64
>> > [ ,A (B ,A (B1.109032] mtrr: type mismatch for e0000000,10000000 old:
>> > write-back new: write-combining
>> > [ ,A (B ,A (B1.114711] [drm] MTRR allocation failed. ,A (BGraphics performance may suffer.
>> > [ ,A (B ,A (B1.120525] i915 0000:00:02.0: irq 27 for MSI/MSI-X
>> > [ ,A (B ,A (B1.120541] [drm] set up 31M of stolen space
>> > [ ,A (B ,A (B1.173585] ACPI: Battery Slot [BAT0] (battery present)
>> > [ ,A (B ,A (B1.743361] [drm] TV-21: set mode NTSC 480i 0
>> > [ ,A (B ,A (B1.917419] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
>> > removing generic driver
>> > [ ,A (B ,A (B1.923290] Console: switching to colour dummy device 80x25
>> > [ ,A (B ,A (B1.993413] [drm] LVDS-8: set mode 1280x800 c
>> > [ ,A (B ,A (B2.180028] async/0 used greatest stack depth: 6240 bytes left
>> > [ ,A (B ,A (B2.311701] Console: switching to colour frame buffer device 160x50
>> > [ ,A (B ,A (B2.344161] fb0: inteldrmfb frame buffer device
>> > [ ,A (B ,A (B2.344163] registered panic notifier
>> > [ ,A (B ,A (B2.381263] acpi device:3b: registered as cooling_device2
>> > [ ,A (B ,A (B2.383064] input: Video Bus as
>> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3
>> > [ ,A (B ,A (B2.383507] ACPI: Video Device [VID1] (multi-head: yes ,A (Brom: no ,A (Bpost: no)
>> > [ ,A (B ,A (B2.383961] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package
>> > has no elements (empty) (20091112/nspredef-439)
>> > [ ,A (B ,A (B2.384794] input: Video Bus as
>> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4
>> > [ ,A (B ,A (B2.385220] ACPI: Video Device [VID2] (multi-head: yes ,A (Brom: no ,A (Bpost: no)
>> > [ ,A (B ,A (B2.385736] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>> > [ ,A (B ,A (B2.386291] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> > [ ,A (B ,A (B2.397666] brd: module loaded
>> > [ ,A (B ,A (B2.402531] loop: module loaded
>> > [ ,A (B ,A (B2.403545] Loading iSCSI transport class v2.0-870.
>> > [ ,A (B ,A (B2.405776] ata_piix 0000:00:1f.2: version 2.13
>> > [ ,A (B ,A (B2.405803] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>> > [ ,A (B ,A (B2.406147] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>> > [ ,A (B ,A (B2.406810] ata_piix 0000:00:1f.2: setting latency timer to 64
>> > [ ,A (B ,A (B2.406998] scsi0 : ata_piix
>> > [ ,A (B ,A (B2.407806] scsi1 : ata_piix
>> > [ ,A (B ,A (B2.410373] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19
>> > [ ,A (B ,A (B2.410705] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19
>> > [ ,A (B ,A (B2.411165] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>> > [ ,A (B ,A (B2.411501] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>> > [ ,A (B ,A (B2.563394] ata_piix 0000:00:1f.5: setting latency timer to 64
>> > [ ,A (B ,A (B2.563493] scsi2 : ata_piix
>> > [ ,A (B ,A (B2.564121] scsi3 : ata_piix
>> > [ ,A (B ,A (B2.575834] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19
>> > [ ,A (B ,A (B2.586887] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19
>> > [ ,A (B ,A (B2.600548] tg3.c:v3.105 (December 2, 2009)
>> > [ ,A (B ,A (B2.611593] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> > [ ,A (B ,A (B2.622751] tg3 0000:09:00.0: setting latency timer to 64
>> > [ ,A (B ,A (B2.638698] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express)
>> > MAC address 00:21:9b:f5:60:0f
>> > [ ,A (B ,A (B2.650064] eth0: attached PHY is 5722/5756 (10/100/1000Base-T
>> > Ethernet) (WireSpeed[1])
>> > [ ,A (B ,A (B2.661533] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>> > [ ,A (B ,A (B2.673063] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>> > [ ,A (B ,A (B2.684889] sky2 driver version 1.26
>> > [ ,A (B ,A (B2.696408] PPP generic driver version 2.4.2
>> > [ ,A (B ,A (B2.708158] PPP Deflate Compression module registered
>> > [ ,A (B ,A (B2.719445] PPP BSD Compression module registered
>> > [ ,A (B ,A (B2.731444] PPP MPPE Compression module registered
>> > [ ,A (B ,A (B2.742638] NET: Registered protocol family 24
>> > [ ,A (B ,A (B2.753770] PPPoL2TP kernel driver, V1.0
>> > [ ,A (B ,A (B2.764836] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
>> > max=256) (6 bit encapsulation enabled).
>> > [ ,A (B ,A (B2.776283] CSLIP: code copyright 1989 Regents of the University of
>> > California.
>> > [ ,A (B ,A (B2.787734] SLIP linefill/keepalive option.
>> > [ ,A (B ,A (B2.799316] console [netcon0] enabled
>> > [ ,A (B ,A (B2.810537] netconsole: network logging started
>> > [ ,A (B ,A (B2.822002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> > [ ,A (B ,A (B2.833433] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>> > [ ,A (B ,A (B2.844842] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>> > [ ,A (B ,A (B2.844848] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>> > [ ,A (B ,A (B2.856214] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
>> > bus number 1
>> > [ ,A (B ,A (B2.867638] ehci_hcd 0000:00:1a.7: debug port 1
>> > [ ,A (B ,A (B2.882679] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>> > [ ,A (B ,A (B2.882717] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>> > [ ,A (B ,A (B2.894255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> > [ ,A (B ,A (B2.905663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> > [ ,A (B ,A (B2.906708] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>> > [ ,A (B ,A (B2.906949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> > [ ,A (B ,A (B2.906952] usb usb1: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B2.906955] usb usb1: Product: EHCI Host Controller
>> > [ ,A (B ,A (B2.906958] usb usb1: Manufacturer: Linux 2.6.32-mm1 ehci_hcd
>> > [ ,A (B ,A (B2.906960] usb usb1: SerialNumber: 0000:00:1a.7
>> > [ ,A (B ,A (B2.908100] hub 1-0:1.0: USB hub found
>> > [ ,A (B ,A (B2.908116] hub 1-0:1.0: 6 ports detected
>> > [ ,A (B ,A (B2.908556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> > [ ,A (B ,A (B2.908581] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> > [ ,A (B ,A (B2.908585] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> > [ ,A (B ,A (B2.908603] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
>> > bus number 2
>> > [ ,A (B ,A (B2.908679] ehci_hcd 0000:00:1d.7: debug port 1
>> > [ ,A (B ,A (B2.912557] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>> > [ ,A (B ,A (B2.912592] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>> > [ ,A (B ,A (B2.934701] ata3: SATA link down (SStatus 0 SControl 300)
>> > [ ,A (B ,A (B2.946085] ata4: SATA link down (SStatus 4 SControl 300)
>> > [ ,A (B ,A (B2.946126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> > [ ,A (B ,A (B2.946207] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>> > [ ,A (B ,A (B2.946210] usb usb2: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B2.946212] usb usb2: Product: EHCI Host Controller
>> > [ ,A (B ,A (B2.946215] usb usb2: Manufacturer: Linux 2.6.32-mm1 ehci_hcd
>> > [ ,A (B ,A (B2.946217] usb usb2: SerialNumber: 0000:00:1d.7
>> > [ ,A (B ,A (B2.946808] hub 2-0:1.0: USB hub found
>> > [ ,A (B ,A (B2.946831] hub 2-0:1.0: 6 ports detected
>> > [ ,A (B ,A (B2.947216] uhci_hcd: USB Universal Host Controller Interface driver
>> > [ ,A (B ,A (B3.159489] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> > [ ,A (B ,A (B3.160208] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133
>> > [ ,A (B ,A (B3.160212] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
>> > [ ,A (B ,A (B3.189480] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>> > [ ,A (B ,A (B3.189485] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>> > [ ,A (B ,A (B3.191391] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100
>> > [ ,A (B ,A (B3.191405] ata2.00: applying bridge limits
>> > [ ,A (B ,A (B3.219002] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
>> > bus number 3
>> > [ ,A (B ,A (B3.229172] ata1.00: configured for UDMA/133
>> > [ ,A (B ,A (B3.229191] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
>> > [ ,A (B ,A (B3.229343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>> > [ ,A (B ,A (B3.229347] usb usb3: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B3.229349] usb usb3: Product: UHCI Host Controller
>> > [ ,A (B ,A (B3.229351] usb usb3: Manufacturer: Linux 2.6.32-mm1 uhci_hcd
>> > [ ,A (B ,A (B3.229354] usb usb3: SerialNumber: 0000:00:1a.0
>> > [ ,A (B ,A (B3.229946] hub 3-0:1.0: USB hub found
>> > [ ,A (B ,A (B3.230036] hub 3-0:1.0: 2 ports detected
>> > [ ,A (B ,A (B3.230281] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>> > [ ,A (B ,A (B3.230296] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>> > [ ,A (B ,A (B3.230301] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>> > [ ,A (B ,A (B3.230323] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
>> > bus number 4
>> > [ ,A (B ,A (B3.230400] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
>> > [ ,A (B ,A (B3.230538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> > [ ,A (B ,A (B3.230541] usb usb4: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B3.230544] usb usb4: Product: UHCI Host Controller
>> > [ ,A (B ,A (B3.230546] usb usb4: Manufacturer: Linux 2.6.32-mm1 uhci_hcd
>> > [ ,A (B ,A (B3.230549] usb usb4: SerialNumber: 0000:00:1a.1
>> > [ ,A (B ,A (B3.231135] hub 4-0:1.0: USB hub found
>> > [ ,A (B ,A (B3.231150] hub 4-0:1.0: 2 ports detected
>> > [ ,A (B ,A (B3.231310] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>> > [ ,A (B ,A (B3.231324] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>> > [ ,A (B ,A (B3.231329] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>> > [ ,A (B ,A (B3.231346] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
>> > bus number 5
>> > [ ,A (B ,A (B3.231393] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
>> > [ ,A (B ,A (B3.231521] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> > [ ,A (B ,A (B3.231524] usb usb5: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B3.231526] usb usb5: Product: UHCI Host Controller
>> > [ ,A (B ,A (B3.231529] usb usb5: Manufacturer: Linux 2.6.32-mm1 uhci_hcd
>> > [ ,A (B ,A (B3.231531] usb usb5: SerialNumber: 0000:00:1a.2
>> > [ ,A (B ,A (B3.232101] hub 5-0:1.0: USB hub found
>> > [ ,A (B ,A (B3.232121] hub 5-0:1.0: 2 ports detected
>> > [ ,A (B ,A (B3.232287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> > [ ,A (B ,A (B3.232302] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> > [ ,A (B ,A (B3.232306] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> > [ ,A (B ,A (B3.232323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
>> > bus number 6
>> > [ ,A (B ,A (B3.232370] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
>> > [ ,A (B ,A (B3.232504] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>> > [ ,A (B ,A (B3.232507] usb usb6: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B3.232510] usb usb6: Product: UHCI Host Controller
>> > [ ,A (B ,A (B3.232512] usb usb6: Manufacturer: Linux 2.6.32-mm1 uhci_hcd
>> > [ ,A (B ,A (B3.232514] usb usb6: SerialNumber: 0000:00:1d.0
>> > [ ,A (B ,A (B3.233084] hub 6-0:1.0: USB hub found
>> > [ ,A (B ,A (B3.233100] hub 6-0:1.0: 2 ports detected
>> > [ ,A (B ,A (B3.233273] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>> > [ ,A (B ,A (B3.233287] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> > [ ,A (B ,A (B3.233292] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> > [ ,A (B ,A (B3.233310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
>> > bus number 7
>> > [ ,A (B ,A (B3.233380] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
>> > [ ,A (B ,A (B3.233513] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>> > [ ,A (B ,A (B3.233516] usb usb7: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B3.233518] usb usb7: Product: UHCI Host Controller
>> > [ ,A (B ,A (B3.233521] usb usb7: Manufacturer: Linux 2.6.32-mm1 uhci_hcd
>> > [ ,A (B ,A (B3.233523] usb usb7: SerialNumber: 0000:00:1d.1
>> > [ ,A (B ,A (B3.234086] hub 7-0:1.0: USB hub found
>> > [ ,A (B ,A (B3.234101] hub 7-0:1.0: 2 ports detected
>> > [ ,A (B ,A (B3.234263] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>> > [ ,A (B ,A (B3.234277] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> > [ ,A (B ,A (B3.234282] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> > [ ,A (B ,A (B3.234299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
>> > bus number 8
>> > [ ,A (B ,A (B3.234347] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>> > [ ,A (B ,A (B3.234480] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>> > [ ,A (B ,A (B3.234483] usb usb8: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ ,A (B ,A (B3.234486] usb usb8: Product: UHCI Host Controller
>> > [ ,A (B ,A (B3.234488] usb usb8: Manufacturer: Linux 2.6.32-mm1 uhci_hcd
>> > [ ,A (B ,A (B3.234490] usb usb8: SerialNumber: 0000:00:1d.2
>> > [ ,A (B ,A (B3.235059] hub 8-0:1.0: USB hub found
>> > [ ,A (B ,A (B3.235082] hub 8-0:1.0: 2 ports detected
>> > [ ,A (B ,A (B3.235437] Initializing USB Mass Storage driver...
>> > [ ,A (B ,A (B3.235668] usbcore: registered new interface driver usb-storage
>> > [ ,A (B ,A (B3.235673] USB Mass Storage support registered.
>> > [ ,A (B ,A (B3.236109] usbcore: registered new interface driver libusual
>> > [ ,A (B ,A (B3.236534] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
>> > 0x60,0x64 irq 1,12
>> > [ ,A (B ,A (B3.237387] i8042.c: Warning: Keylock active.
>> > [ ,A (B ,A (B3.240564] serio: i8042 KBD port at 0x60,0x64 irq 1
>> > [ ,A (B ,A (B3.240605] serio: i8042 AUX port at 0x60,0x64 irq 12
>> > [ ,A (B ,A (B3.241694] mice: PS/2 mouse device common for all mice
>> > [ ,A (B ,A (B3.243828] Driver 'rtc_cmos' needs updating - please use bus_type methods
>> > [ ,A (B ,A (B3.243873] rtc_cmos 00:03: RTC can wake from S4
>> > [ ,A (B ,A (B3.244268] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>> > [ ,A (B ,A (B3.244314] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>> > [ ,A (B ,A (B3.244498] i2c /dev entries driver
>> > [ ,A (B ,A (B3.246702] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
>> > low) -> IRQ 19
>> > [ ,A (B ,A (B3.982537] ata2.00: configured for UDMA/100
>> > [ ,A (B ,A (B3.983129] scsi 0:0:0:0: Direct-Access ,A (B ,A (B ATA ,A (B ,A (B ,A (BST9160310AS
>> > ,A (BDE04 PQ: 0 ANSI: 5
>> > [ ,A (B ,A (B3.984407] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
>> > [ ,A (B ,A (B3.985019] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks:
>> > (160 GB/149 GiB)
>> > [ ,A (B ,A (B3.985213] sd 0:0:0:0: [sda] Write Protect is off
>> > [ ,A (B ,A (B3.985217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> > [ ,A (B ,A (B3.985296] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> > enabled, doesn't support DPO or FUA
>> > [ ,A (B ,A (B3.986007] ,A (Bsda:
>> > [ ,A (B ,A (B3.987294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>> > [ ,A (B ,A (B3.987559] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> > [ ,A (B ,A (B3.988645] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
>> > [ ,A (B ,A (B3.988921] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> > [ ,A (B ,A (B3.988927] iTCO_vendor_support: vendor-support=0
>> > [ ,A (B ,A (B4.103269] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05)
>> > initialised: dm-devel@xxxxxxxxxx
>> > [ ,A (B ,A (B4.114089] device-mapper: dm-log-userspace: version 1.0.0 loaded
>> > [ ,A (B ,A (B4.115717] scsi 1:0:0:0: CD-ROM ,A (B ,A (B ,A (B ,A (B ,A (B ,A (BTSSTcorp DVD+-RW
>> > TS-L633A D500 PQ: 0 ANSI: 5
>> > [ ,A (B ,A (B4.136170] input: AT Translated Set 2 keyboard as
>> > /devices/platform/i8042/serio0/input/input5
>> > [ ,A (B ,A (B4.137513] cpuidle: using governor ladder
>> > [ ,A (B ,A (B4.160918] cpuidle: using governor menu
>> > [ ,A (B ,A (B4.172702] sdhci: Secure Digital Host Controller Interface driver
>> > [ ,A (B ,A (B4.183721] sdhci: Copyright(c) Pierre Ossman
>> > [ ,A (B ,A (B4.187247] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
>> > xa/form2 cdda tray
>> > [ ,A (B ,A (B4.187251] Uniform CD-ROM driver Revision: 3.20
>> > [ ,A (B ,A (B4.188050] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> > [ ,A (B ,A (B4.188595] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> > [ ,A (B ,A (B4.228490] dcdbas dcdbas: Dell Systems Management Base Driver
>> > (version 5.6.0-3.2)
>> > [ ,A (B ,A (B4.244671] ,A (Bsda1 sda2 sda3 sda4 <
>> > [ ,A (B ,A (B4.246859] usbcore: registered new interface driver hiddev
>> > [ ,A (B ,A (B4.269823] usbcore: registered new interface driver usbhid
>> > [ ,A (B ,A (B4.281086] usbhid: USB HID core driver
>> > [ ,A (B ,A (B4.292291] ,A (Bsda5
>> > [ ,A (B ,A (B4.292837] Advanced Linux Sound Architecture Driver Version 1.0.21.
>> > [ ,A (B ,A (B4.314873] ALSA device list:
>> > [ ,A (B ,A (B4.325942] ,A (B No soundcards found.
>> > [ ,A (B ,A (B4.336996] Netfilter messages via NETLINK v0.30.
>> > [ ,A (B ,A (B4.348290] ,A (Bsda6nf_conntrack version 0.5.0 (15334 buckets, 61336 max)
>> > [ ,A (B ,A (B4.360287] ctnetlink v0.93: registering with nfnetlink.
>> > [ ,A (B ,A (B4.374177] ip_tables: (C) 2000-2006 Netfilter Core Team
>> > [ ,A (B ,A (B4.385662] TCP cubic registered
>> > [ ,A (B ,A (B4.396917] NET: Registered protocol family 17
>> > [ ,A (B ,A (B4.408204] lib80211: common routines for IEEE802.11 drivers
>> > [ ,A (B ,A (B4.419455] lib80211_crypt: registered algorithm 'NULL'
>> > [ ,A (B ,A (B4.421640] ,A (Bsda7
>> > [ ,A (B ,A (B4.422604] Using IPI No-Shortcut mode
>> > [ ,A (B ,A (B4.444566] ,A (Bsda8 >
>> > [ ,A (B ,A (B4.457176] PM: Checking image partition /dev/sda8
>> > [ ,A (B ,A (B4.457222] PM: Resume from partition 8:8
>> > [ ,A (B ,A (B4.457225] PM: Checking hibernation image.
>> > [ ,A (B ,A (B4.457992] PM: Error -22 checking image file
>> > [ ,A (B ,A (B4.457994] PM: Resume from disk failed.
>> > [ ,A (B ,A (B4.458061] registered taskstats version 1
>> > [ ,A (B ,A (B4.460011] sd 0:0:0:0: [sda] Attached SCSI disk
>> > [ ,A (B ,A (B4.481540] ,A (B Magic number: 5:855:537
>> > [ ,A (B ,A (B4.492483] bdi 1:15: hash matches
>> > [ ,A (B ,A (B4.503405] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>> > [ ,A (B ,A (B4.650495] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
>> > [ ,A (B ,A (B4.692892] input: AlpsPS/2 ALPS GlidePoint as
>> > /devices/platform/i8042/serio1/input/input7
>> > [ ,A (B ,A (B4.720082] md: Waiting for all devices to be available before autodetect
>> > [ ,A (B ,A (B4.742549] md: If you don't use raid, use raid=noautodetect
>> > [ ,A (B ,A (B4.767844] md: Autodetecting RAID arrays.
>> > [ ,A (B ,A (B4.778687] md: Scanned 0 and added 0 devices.
>> > [ ,A (B ,A (B4.789416] md: autorun ...
>> > [ ,A (B ,A (B4.800012] md: ... autorun DONE.
>> > [ ,A (B ,A (B5.003501] Clocksource tsc unstable (delta = -321604132 ns)
>> > [ ,A (B ,A (B5.079096] kjournald starting. ,A (BCommit interval 5 seconds
>> > [ ,A (B ,A (B5.079824] EXT3-fs (sda2): mounted filesystem with writeback data mode
>> > [ ,A (B ,A (B5.080120] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
>> > [ ,A (B ,A (B5.142808] Freeing unused kernel memory: 408k freed
>> > [ ,A (B ,A (B5.165214] Write protecting the kernel text: 3908k
>> > [ ,A (B ,A (B5.186530] async/1 used greatest stack depth: 6064 bytes left
>> > [ ,A (B ,A (B5.196969] Write protecting the kernel read-only data: 2088k
>> > [ ,A (B ,A (B6.333570] mount used greatest stack depth: 6040 bytes left
>> > [ ,A (B ,A (B6.951249] udevd used greatest stack depth: 5952 bytes left
>> > [ ,A (B ,A (B7.234948] modprobe used greatest stack depth: 5828 bytes left
>> > [ ,A (B ,A (B7.651236] cfg80211: Using static regulatory domain info
>> > [ ,A (B ,A (B7.661764] cfg80211: Regulatory domain: US
>> > [ ,A (B ,A (B7.671985] ,A (B ,A (B (start_freq - end_freq @ bandwidth),
>> > (max_antenna_gain, max_eirp)
>> > [ ,A (B ,A (B7.682267] ,A (B ,A (B (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>> > [ ,A (B ,A (B7.692698] ,A (B ,A (B (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>> > [ ,A (B ,A (B7.703043] ,A (B ,A (B (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>> > [ ,A (B ,A (B7.713325] ,A (B ,A (B (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>> > [ ,A (B ,A (B7.723694] ,A (B ,A (B (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>> > [ ,A (B ,A (B7.733671] ,A (B ,A (B (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>> > [ ,A (B ,A (B7.771924] sdhci-pci 0000:02:01.2: SDHCI controller found
>> > [1180:0822] (rev 21)
>> > [ ,A (B ,A (B7.781951] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level,
>> > low) -> IRQ 18
>> > [ ,A (B ,A (B7.794964] ACPI: WMI: Mapper loaded
>> > [ ,A (B ,A (B7.879419] Registered led device: mmc0::
>> > [ ,A (B ,A (B7.944622] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
>> > [ ,A (B ,A (B7.966785] mmc0: Minimum clock frequency too high for identification mode
>> > [ ,A (B ,A (B7.997256] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>> > [ ,A (B ,A (B8.016459] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
>> > low) -> IRQ 21
>> > [ ,A (B ,A (B8.036194] cfg80211: Calling CRDA for country: US
>> > [ ,A (B ,A (B8.069726] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
>> > MMIO=[f67ff800-f67fffff] ,A (BMax Packet=[2048] ,A (BIR/IT contexts=[4/4]
>> > [ ,A (B ,A (B8.080275] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
>> > [ ,A (B ,A (B8.080357] HDA Intel 0000:00:1b.0: setting latency timer to 64
>> > [ ,A (B ,A (B8.512355] input: Dell WMI hotkeys as /devices/virtual/input/input8
>> > [ ,A (B ,A (B9.389757] ieee1394: Host added: ID:BUS[0-00:1023] ,A (BGUID[464fc0001679c05c]
>> > [ ,A (B ,A (B9.532991] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
>> > [ ,A (B ,A (B9.580380] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
>> > [ ,A (B ,A (B9.580405] b43-phy0 debug: Found Radio: Manuf 0x17F, Version
>> > 0x2062, Revision 2
>> > [ ,A (B ,A (B9.604678] phy0: Selected rate control algorithm 'minstrel'
>> > [ ,A (B ,A (B9.608519] Registered led device: b43-phy0::tx
>> > [ ,A (B ,A (B9.630314] Registered led device: b43-phy0::rx
>> > [ ,A (B ,A (B9.651887] Registered led device: b43-phy0::radio
>> > [ ,A (B ,A (B9.662725] Broadcom 43xx driver loaded [ Features: PLS, Firmware-ID: FW13 ]
>> > [ ,A (B 10.307938] Adding 2008084k swap on /dev/sda8. ,A (BPriority:-1
>> > extents:1 across:2008084k
>> > [ ,A (B 12.595365] EXT3-fs (sda2): using internal journal
>> > [ ,A (B 17.969618] kjournald starting. ,A (BCommit interval 5 seconds
>> > [ ,A (B 17.991570] EXT3-fs (sda3): using internal journal
>> > [ ,A (B 18.013380] EXT3-fs (sda3): mounted filesystem with writeback data mode
>> > [ ,A (B 18.237351] modprobe used greatest stack depth: 5816 bytes left
>> > [ ,A (B 18.299750] REISERFS (device sda5): found reiserfs format "3.6"
>> > with standard journal
>> > [ ,A (B 18.322229] REISERFS warning (device sda5): ,A (Breiserfs_fill_super:
>> > CONFIG_REISERFS_CHECK is set ON
>> > [ ,A (B 18.344705] REISERFS warning (device sda5): ,A (Breiserfs_fill_super: -
>> > it is slow mode for debugging.
>> > [ ,A (B 18.366916] REISERFS (device sda5): using ordered data mode
>> > [ ,A (B 18.402628] REISERFS (device sda5): journal params: device sda5,
>> > size 8192, journal first block 18, max trans len 1024, max batch 900,
>> > max commit age 30, max trans age 30
>> > [ ,A (B 18.425822] REISERFS (device sda5): checking transaction log (sda5)
>> > [ ,A (B 18.437324] REISERFS debug (device sda5): journal-1153: found in
>> > header: first_unflushed_offset 1203, last_flushed_trans_id 124057
>> > [ ,A (B 18.441500] REISERFS debug (device sda5): journal-1006: found valid
>> > transaction start offset 4294968499, len 121333 id 4096
>> > [ ,A (B 18.441510] REISERFS debug (device sda5): journal-1206: Starting
>> > replay from offset 532825052808371, trans_id 2823643143
>> > [ ,A (B 18.441519] REISERFS debug (device sda5): journal-1037:
>> > journal_read_transaction, offset 4294968499, len 359 mount_id
>> > -1471324153
>> > [ ,A (B 18.441527] REISERFS debug (device sda5): journal-1039:
>> > journal_read_trans skipping because 1203 is too old
>> > [ ,A (B 18.441534] REISERFS debug (device sda5): journal-1299: Setting
>> > newest_mount_id to 457
>> > [ ,A (B 18.465006] REISERFS (device sda5): Using r5 hash to sort names
>> > [ ,A (B 18.517772] mount used greatest stack depth: 5740 bytes left
>> > [ ,A (B 19.151072] rc.S used greatest stack depth: 5424 bytes left
>> > [ ,A (B 27.284345] smbd used greatest stack depth: 5296 bytes left
>> > [ ,A (B224.256014] PM: Syncing filesystems ... done.
>> > [ ,A (B224.295550] PM: Preparing system for mem sleep
>> > [ ,A (B224.295734] Freezing user space processes ... (elapsed 0.01 seconds) done.
>> > [ ,A (B224.306948] Freezing remaining freezable tasks ... (elapsed 0.01
>> > seconds) done.
>> > [ ,A (B224.320225] PM: Entering mem sleep
>> > [ ,A (B224.320350] Suspending console(s) (use no_console_suspend to debug)
>> > [ ,A (B224.335095] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>> > [ ,A (B224.538141] sd 0:0:0:0: [sda] Stopping disk
>> > [ ,A (B225.379324] ACPI handle has no context!
>> > [ ,A (B225.379364] sdhci-pci 0000:02:01.2: PCI INT C disabled
>> > [ ,A (B225.379374] ACPI handle has no context!
>> > [ ,A (B225.395501] ACPI handle has no context!
>> > [ ,A (B225.407487] b43-pci-bridge 0000:0c:00.0: PCI INT A disabled
>> > [ ,A (B225.420718] ata_piix 0000:00:1f.5: PCI INT D disabled
>> > [ ,A (B225.433838] ata_piix 0000:00:1f.2: PCI INT D disabled
>> > [ ,A (B225.446992] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>> > [ ,A (B225.447061] uhci_hcd 0000:00:1d.2: PCI INT C disabled
>> > [ ,A (B225.447076] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>> > [ ,A (B225.447090] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>> > [ ,A (B225.653729] HDA Intel 0000:00:1b.0: PCI INT A disabled
>> > [ ,A (B225.666930] ehci_hcd 0000:00:1a.7: PCI INT C disabled
>> > [ ,A (B225.666952] uhci_hcd 0000:00:1a.2: PCI INT C disabled
>> > [ ,A (B225.666974] uhci_hcd 0000:00:1a.1: PCI INT B disabled
>> > [ ,A (B225.667001] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>> > [ ,A (B225.680708] render error detected, EIR: 0x00000010
>> > [ ,A (B225.680711] ,A (B IPEIR: 0x00000000
>> > [ ,A (B225.680714] ,A (B IPEHR: 0x01000000
>> > [ ,A (B225.680716] ,A (B INSTDONE: 0xfffffffe
>> > [ ,A (B225.680718] ,A (B INSTPS: 0x0001e000
>> > [ ,A (B225.680720] ,A (B INSTDONE1: 0xffffffff
>> > [ ,A (B225.680722] ,A (B ACTHD: 0x02000018
>> > [ ,A (B225.680725] page table error
>> > [ ,A (B225.680727] ,A (B PGTBL_ER: 0x00100000
>> > [ ,A (B225.680731] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
>> > [ ,A (B225.731462] ACPI: Preparing to enter system sleep state S3
>> > [ ,A (B225.754167] Disabling non-boot CPUs ...
>> > [ ,A (B225.809478] CPU 1 is now offline
>> > [ ,A (B225.809481] lockdep: fixing up alternatives.
>> > [ ,A (B225.809487] SMP alternatives: switching to UP code
>> > [ ,A (B225.816500] Extended CMOS year: 2000
>> > [ ,A (B225.816500] Back to C!
>> > [ ,A (B225.816500] Extended CMOS year: 2000
>> > [ ,A (B225.816720] Enabling non-boot CPUs ...
>> > [ ,A (B225.818422] lockdep: fixing up alternatives.
>> > [ ,A (B225.818425] SMP alternatives: switching to SMP code
>> > [ ,A (B225.822188] Booting processor 1 APIC 0x1 ip 0x6000
>> > [ ,A (B225.818021] Initializing CPU#1
>> > [ ,A (B225.818021] CPU: Physical Processor ID: 0
>> > [ ,A (B225.818021] CPU: Processor Core ID: 1
>> > [ ,A (B225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU ,A (B ,A (B T7250 ,A (B@ 2.00GHz stepping 0d
>> > [ ,A (B225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
>> > [ ,A (B225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d
>> > [ ,A (B225.937179] firmware microcode: parent microcode should not be sleeping
>> > [ ,A (B285.940840] CPU1 is up
>> > [ ,A (B285.941309] ACPI: Waking up from system sleep state S3
>> > [ ,A (B285.991446] i915 0000:00:02.0: restoring config space at offset 0xf
>> > (was 0x100, writing 0x10b)
>> > [ ,A (B285.991465] i915 0000:00:02.0: restoring config space at offset 0x8
>> > (was 0x1, writing 0xefe9)
>> > [ ,A (B285.991474] i915 0000:00:02.0: restoring config space at offset 0x6
>> > (was 0xc, writing 0xe000000c)
>> > [ ,A (B285.991488] i915 0000:00:02.0: restoring config space at offset 0x1
>> > (was 0x900007, writing 0x900407)
>> > [ ,A (B285.991554] pci 0000:00:02.1: restoring config space at offset 0x4
>> > (was 0x4, writing 0xf6b00004)
>> > [ ,A (B285.991564] pci 0000:00:02.1: restoring config space at offset 0x1
>> > (was 0x900000, writing 0x900007)
>> > [ ,A (B285.991594] uhci_hcd 0000:00:1a.0: restoring config space at offset
>> > 0xf (was 0x100, writing 0x10a)
>> > [ ,A (B285.991618] uhci_hcd 0000:00:1a.0: restoring config space at offset
>> > 0x8 (was 0x1, writing 0x6f61)
>> > [ ,A (B285.991643] uhci_hcd 0000:00:1a.0: restoring config space at offset
>> > 0x1 (was 0x2900000, writing 0x2900001)
>> > [ ,A (B285.991678] uhci_hcd 0000:00:1a.1: restoring config space at offset
>> > 0xf (was 0x200, writing 0x207)
>> > [ ,A (B285.991703] uhci_hcd 0000:00:1a.1: restoring config space at offset
>> > 0x8 (was 0x1, writing 0x6f81)
>> > [ ,A (B285.991727] uhci_hcd 0000:00:1a.1: restoring config space at offset
>> > 0x1 (was 0x2900000, writing 0x2900001)
>> > [ ,A (B285.991762] uhci_hcd 0000:00:1a.2: restoring config space at offset
>> > 0xf (was 0x300, writing 0x305)
>> > [ ,A (B285.991786] uhci_hcd 0000:00:1a.2: restoring config space at offset
>> > 0x8 (was 0x1, writing 0x6fa1)
>> > [ ,A (B285.991811] uhci_hcd 0000:00:1a.2: restoring config space at offset
>> > 0x1 (was 0x2900000, writing 0x2900001)
>> > [ ,A (B285.991895] ehci_hcd 0000:00:1a.7: restoring config space at offset
>> > 0x1 (was 0x2900106, writing 0x2900102)
>> > [ ,A (B285.991956] HDA Intel 0000:00:1b.0: restoring config space at
>> > offset 0xf (was 0x100, writing 0x107)
>> > [ ,A (B285.991991] HDA Intel 0000:00:1b.0: restoring config space at
>> > offset 0x4 (was 0xfebfc004, writing 0xf6afc004)
>> > [ ,A (B285.992000] HDA Intel 0000:00:1b.0: restoring config space at
>> > offset 0x3 (was 0x0, writing 0x10)
>> > [ ,A (B285.992011] HDA Intel 0000:00:1b.0: restoring config space at
>> > offset 0x1 (was 0x100000, writing 0x100102)
>> > [ ,A (B285.992068] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0xf (was 0x100, writing 0x20100)
>> > [ ,A (B285.992090] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0x9 (was 0x10001, writing 0x44314421)
>> > [ ,A (B285.992098] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0x8 (was 0x0, writing 0x44104400)
>> > [ ,A (B285.992107] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0x7 (was 0x20000000, writing 0x2020)
>> > [ ,A (B285.992115] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0x6 (was 0x0, writing 0xb0b00)
>> > [ ,A (B285.992129] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0x3 (was 0x810000, writing 0x810010)
>> > [ ,A (B285.992140] pcieport 0000:00:1c.0: restoring config space at offset
>> > 0x1 (was 0x100000, writing 0x100507)
>> > [ ,A (B285.992227] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0xf (was 0x200, writing 0x20200)
>> > [ ,A (B285.992249] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0x9 (was 0x10001, writing 0x44514441)
>> > [ ,A (B285.992257] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0x8 (was 0x0, writing 0xf690f690)
>> > [ ,A (B285.992266] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0x7 (was 0x20000000, writing 0x3030)
>> > [ ,A (B285.992275] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0x6 (was 0x0, writing 0xc0c00)
>> > [ ,A (B285.992289] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0x3 (was 0x810000, writing 0x810010)
>> > [ ,A (B285.992300] pcieport 0000:00:1c.1: restoring config space at offset
>> > 0x1 (was 0x100000, writing 0x100507)
>> > [ ,A (B285.992386] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0xf (was 0x100, writing 0x20100)
>> > [ ,A (B285.992408] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0x9 (was 0x10001, writing 0x44714461)
>> > [ ,A (B285.992417] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0x8 (was 0x0, writing 0xf680f680)
>> > [ ,A (B285.992425] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0x7 (was 0x20000000, writing 0x4040)
>> > [ ,A (B285.992434] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0x6 (was 0x0, writing 0x90900)
>> > [ ,A (B285.992448] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0x3 (was 0x810000, writing 0x810010)
>> > [ ,A (B285.992459] pcieport 0000:00:1c.4: restoring config space at offset
>> > 0x1 (was 0x100000, writing 0x100407)
>> > [ ,A (B285.992571] uhci_hcd 0000:00:1d.0: restoring config space at offset
>> > 0x1 (was 0x2900005, writing 0x2900001)
>> > [ ,A (B285.992606] uhci_hcd 0000:00:1d.1: restoring config space at offset
>> > 0xf (was 0x200, writing 0x207)
>> > [ ,A (B285.992630] uhci_hcd 0000:00:1d.1: restoring config space at offset
>> > 0x8 (was 0x1, writing 0x6f21)
>> > [ ,A (B285.992655] uhci_hcd 0000:00:1d.1: restoring config space at offset
>> > 0x1 (was 0x2900000, writing 0x2900001)
>> > [ ,A (B285.992689] uhci_hcd 0000:00:1d.2: restoring config space at offset
>> > 0xf (was 0x300, writing 0x305)
>> > [ ,A (B285.992714] uhci_hcd 0000:00:1d.2: restoring config space at offset
>> > 0x8 (was 0x1, writing 0x6f41)
>> > [ ,A (B285.992738] uhci_hcd 0000:00:1d.2: restoring config space at offset
>> > 0x1 (was 0x2900000, writing 0x2900001)
>> > [ ,A (B285.992823] ehci_hcd 0000:00:1d.7: restoring config space at offset
>> > 0x1 (was 0x2900106, writing 0x2900102)
>> > [ ,A (B285.992883] pci 0000:00:1e.0: restoring config space at offset 0x9
>> > (was 0x1fff1, writing 0x43f14001)
>> > [ ,A (B285.992895] pci 0000:00:1e.0: restoring config space at offset 0x7
>> > (was 0x2280e0f0, writing 0x22805050)
>> > [ ,A (B285.992903] pci 0000:00:1e.0: restoring config space at offset 0x6
>> > (was 0x20020200, writing 0x20030200)
>> > [ ,A (B285.992997] pci 0000:00:1f.0: restoring config space at offset 0x1
>> > (was 0x2100007, writing 0x2100107)
>> > [ ,A (B285.993041] ata_piix 0000:00:1f.2: restoring config space at offset
>> > 0xf (was 0x400, writing 0x40a)
>> > [ ,A (B285.993109] i801_smbus 0000:00:1f.3: restoring config space at
>> > offset 0xf (was 0x200, writing 0x204)
>> > [ ,A (B285.993144] i801_smbus 0000:00:1f.3: restoring config space at
>> > offset 0x4 (was 0x4, writing 0xf6afbf04)
>> > [ ,A (B285.993159] i801_smbus 0000:00:1f.3: restoring config space at
>> > offset 0x1 (was 0x2800001, writing 0x2800103)
>> > [ ,A (B285.993192] ata_piix 0000:00:1f.5: restoring config space at offset
>> > 0xf (was 0x400, writing 0x40a)
>> > [ ,A (B285.993214] ata_piix 0000:00:1f.5: restoring config space at offset
>> > 0x9 (was 0x1, writing 0xeff1)
>> > [ ,A (B285.993241] ata_piix 0000:00:1f.5: restoring config space at offset
>> > 0x1 (was 0x2b00000, writing 0x2b00007)
>> > [ ,A (B285.993557] b43-pci-bridge 0000:0c:00.0: restoring config space at
>> > offset 0xf (was 0x100, writing 0x104)
>> > [ ,A (B285.993632] b43-pci-bridge 0000:0c:00.0: restoring config space at
>> > offset 0x4 (was 0x4, writing 0xf69fc004)
>> > [ ,A (B285.993648] b43-pci-bridge 0000:0c:00.0: restoring config space at
>> > offset 0x3 (was 0x0, writing 0x10)
>> > [ ,A (B285.993669] b43-pci-bridge 0000:0c:00.0: restoring config space at
>> > offset 0x1 (was 0x100000, writing 0x100106)
>> > [ ,A (B285.993877] tg3 0000:09:00.0: restoring config space at offset 0x3
>> > (was 0x0, writing 0x10)
>> > [ ,A (B285.993890] tg3 0000:09:00.0: restoring config space at offset 0x1
>> > (was 0x100000, writing 0x100106)
>> > [ ,A (B285.993958] pci 0000:02:01.0: restoring config space at offset 0xf
>> > (was 0x7000100, writing 0x700010a)
>> > [ ,A (B285.993966] pci 0000:02:01.0: restoring config space at offset 0xe
>> > (was 0x0, writing 0x51fc)
>> > [ ,A (B285.993975] pci 0000:02:01.0: restoring config space at offset 0xd
>> > (was 0x0, writing 0x5100)
>> > [ ,A (B285.993983] pci 0000:02:01.0: restoring config space at offset 0xc
>> > (was 0x0, writing 0x50fc)
>> > [ ,A (B285.993992] pci 0000:02:01.0: restoring config space at offset 0xb
>> > (was 0x0, writing 0x5000)
>> > [ ,A (B285.994000] pci 0000:02:01.0: restoring config space at offset 0xa
>> > (was 0x0, writing 0x4bfff000)
>> > [ ,A (B285.994009] pci 0000:02:01.0: restoring config space at offset 0x9
>> > (was 0x0, writing 0x48000000)
>> > [ ,A (B285.994017] pci 0000:02:01.0: restoring config space at offset 0x8
>> > (was 0x0, writing 0x43fff000)
>> > [ ,A (B285.994026] pci 0000:02:01.0: restoring config space at offset 0x7
>> > (was 0x0, writing 0x40000000)
>> > [ ,A (B285.994035] pci 0000:02:01.0: restoring config space at offset 0x6
>> > (was 0x0, writing 0xb0060302)
>> > [ ,A (B285.994046] pci 0000:02:01.0: restoring config space at offset 0x4
>> > (was 0x0, writing 0xf6700000)
>> > [ ,A (B285.994054] pci 0000:02:01.0: restoring config space at offset 0x3
>> > (was 0x820000, writing 0x824000)
>> > [ ,A (B285.994066] pci 0000:02:01.0: restoring config space at offset 0x1
>> > (was 0x2100000, writing 0x2100107)
>> > [ ,A (B285.994106] ohci1394 0000:02:01.1: restoring config space at offset
>> > 0xf (was 0x4020200, writing 0x4020204)
>> > [ ,A (B285.994146] ohci1394 0000:02:01.1: restoring config space at offset
>> > 0x3 (was 0x800000, writing 0x804010)
>> > [ ,A (B285.994159] ohci1394 0000:02:01.1: restoring config space at offset
>> > 0x1 (was 0x2100000, writing 0x2100106)
>> > [ ,A (B285.994197] sdhci-pci 0000:02:01.2: restoring config space at
>> > offset 0xf (was 0x300, writing 0x303)
>> > [ ,A (B285.994232] sdhci-pci 0000:02:01.2: restoring config space at
>> > offset 0x4 (was 0x0, writing 0xf67ff700)
>> > [ ,A (B285.994241] sdhci-pci 0000:02:01.2: restoring config space at
>> > offset 0x3 (was 0x800000, writing 0x804010)
>> > [ ,A (B285.994253] sdhci-pci 0000:02:01.2: restoring config space at
>> > offset 0x1 (was 0x2100000, writing 0x2100106)
>> > [ ,A (B286.009482] PM: Device PNP0C0D:00 failed to resume: error 1
>> > [ ,A (B286.039022] dell-wmi: Unknown key e044 pressed
>> > [ ,A (B286.151069] i915 0000:00:02.0: setting latency timer to 64
>> > [ ,A (B286.243570] [drm] LVDS-8: set mode 1280x800 c
>> > [ ,A (B286.290393] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> > [ ,A (B286.290404] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>> > [ ,A (B286.290441] usb usb3: root hub lost power or was reset
>> > [ ,A (B286.290466] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>> > [ ,A (B286.290475] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>> > [ ,A (B286.290505] usb usb4: root hub lost power or was reset
>> > [ ,A (B286.290527] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>> > [ ,A (B286.290537] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>> > [ ,A (B286.290565] usb usb5: root hub lost power or was reset
>> > [ ,A (B286.290588] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>> > [ ,A (B286.290598] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>> > [ ,A (B286.290613] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
>> > low) -> IRQ 21
>> > [ ,A (B286.290623] HDA Intel 0000:00:1b.0: setting latency timer to 64
>> > [ ,A (B286.290689] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
>> > [ ,A (B286.290764] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> > [ ,A (B286.290773] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> > [ ,A (B286.290801] usb usb6: root hub lost power or was reset
>> > [ ,A (B286.290846] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>> > [ ,A (B286.290856] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> > [ ,A (B286.290887] usb usb7: root hub lost power or was reset
>> > [ ,A (B286.290911] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>> > [ ,A (B286.290921] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> > [ ,A (B286.290950] usb usb8: root hub lost power or was reset
>> > [ ,A (B286.290972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> > [ ,A (B286.290982] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> > [ ,A (B286.291001] pci 0000:00:1e.0: setting latency timer to 64
>> > [ ,A (B286.291018] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>> > [ ,A (B286.291025] ata_piix 0000:00:1f.2: setting latency timer to 64
>> > [ ,A (B286.291110] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>> > [ ,A (B286.291119] ata_piix 0000:00:1f.5: setting latency timer to 64
>> > [ ,A (B286.291394] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17
>> > (level, low) -> IRQ 17
>> > [ ,A (B286.307121] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> > [ ,A (B286.362261] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
>> > MMIO=[f67ff800-f67fffff] ,A (BMax Packet=[2048] ,A (BIR/IT contexts=[4/4]
>> > [ ,A (B286.368333] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level,
>> > low) -> IRQ 18
>> > [ ,A (B286.383529] mmc0: Minimum clock frequency too high for identification mode
>> > [ ,A (B286.423034] sd 0:0:0:0: [sda] Starting disk
>> > [ ,A (B286.621595] ata3: SATA link down (SStatus 0 SControl 300)
>> > [ ,A (B286.632845] ata4: SATA link down (SStatus 4 SControl 300)
>> > [ ,A (B286.763599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> > [ ,A (B286.763812] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> > [ ,A (B286.823841] ata2.00: configured for UDMA/100
>> > [ ,A (B287.027642] ata1.00: configured for UDMA/133
>> > [ ,A (B287.095609] PM: Finishing wakeup.
>> > [ ,A (B287.095611] Restarting tasks ... done.
>> > [ ,A (B457.056279] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B457.249535] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B457.423506] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B457.608626] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B457.788025] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B457.947402] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B460.438540] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B475.910065] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B476.103445] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B477.844084] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B478.093328] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B478.950676] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B479.229816] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B479.459126] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B479.658534] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B480.525933] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B480.748745] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B480.944699] dell-wmi: Unknown key 48 pressed
>> > [ ,A (B549.103799] b43 ssb0:0: firmware: requesting b43/ucode15.fw
>> > [ ,A (B549.215863] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
>> > [ ,A (B549.244516] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
>> > [ ,A (B549.403735] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>> > [ ,A (B549.406244] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz.
>> > [ ,A (B553.990808] b43-phy0 debug: Chip initialized
>> > [ ,A (B553.991181] b43-phy0 debug: PIO initialized
>> > [ ,A (B553.991297] b43-phy0 debug: QoS enabled
>> > [ ,A (B554.010624] b43-phy0 debug: Wireless interface started
>> > [ ,A (B554.018136] b43-phy0 debug: Adding Interface type 2
>> > [ ,A (B555.225635] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1)
>> > [ ,A (B555.227406] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1)
>> > [ ,A (B555.247446] wlan0: direct probe responded
>> > [ ,A (B555.247504] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1)
>> > [ ,A (B555.275021] wlan0: authenticated
>> > [ ,A (B555.275905] wlan0: associate with AP 00:02:2d:08:51:2b (try 1)
>> > [ ,A (B555.284599] wlan0: RX AssocResp from 00:02:2d:08:51:2b (capab=0x1
>> > status=0 aid=12)
>> > [ ,A (B555.284608] wlan0: associated
>> > [ ,A (B561.323866] mtrr: type mismatch for e0000000,10000000 old:
>> > write-back new: write-combining
>> > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after
>> > 500ms, disconnecting.
>> > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1)
>> > [ 2689.780643] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 2)
>> > [ 2689.798772] wlan0: direct probe responded
>> > [ 2689.798778] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1)
>> > [ 2689.986996] wlan0: authenticated
>> > [ 2689.987691] wlan0: associate with AP 00:02:2d:08:51:2b (try 1)
>> > [ 2690.006697] wlan0: RX ReassocResp from 00:02:2d:08:51:2b (capab=0x1
>> > status=0 aid=1)
>> > [ 2690.006706] wlan0: associated
>> >
>> > --
>> > Regards
>> > dave
>> >
>>
>>
>>
>> --
>> Regards
>> dave
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Adam Litke: "[PATCH] virtio: Fix scheduling while atomic in virtio_balloon stats"
Previous message: Alexander Holler: "Re: Problems with p55-express and sleeping usb-hds"
In reply to: Dave Young: "Re: mmotm-2009-12-08-17-45 resume slowly"
Next in thread: Johannes Berg: "Re: mmotm-2009-12-08-17-45 resume slowly"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]