Re: No PCI-X / PCI-E cards ...

[Krzysztof Halasa]

Xavier Bestel <xavier.bestel@xxxxxxx> writes:

>> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
>> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
>> only accept 3.3v, not 5v IIRC)

The card has to force 33 MHz non-PCI-X mode. I'd check if the "pins" 38B
(PCIXCAP) and 49B (M66EN) are both connected to GND. Also you can try
inserting another PCI card into another PCI-X slot (in the same bus
segment), this may force 33 PCI mode (check if the other card is
detected).
-- 
Krzysztof Halasa
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/