Re: JMB363 false hotplug detections

[Krzysztof Halasa]

Tejun Heo <tj@xxxxxxxxxx> writes:

> Can someone point me to the original thread?

Sure:

http://lkml.org/lkml/2010/1/13/342
http://lkml.org/lkml/2010/1/15/245

BTW setting the JMB363 mode in BIOS setup from IDE to AHCI or RAID
(thus enabling JMB363 BIOS) changes nothing.

The only weird thing is that some time ago the problems weren't there.
It could be genuine hardware problem. I have full kernel logs. Sometimes
the same kernel (build) is "good" at one time and "bad" at another.

I had booted the board (with JMB363 and the driver enabled) 57 times.
Out of these, there was no problems 16 times (date-hrs-result):

08-18-start-good
08-18-23:21-good
08-20-12:21-good
08-20-12:41-good
08-20-13:40-good
08-20-13:52-good
08-20-13:54-good
08-20-14:06-good
08-20-16:16-good
08-20-20:53-good
08-21-11:15-bad
08-22-12:10-good (uncertain, the kernel had other problems)
08-22-12:12-bad
08-22-22:36-bad
08-22-22:39-bad
08-22-22:40-bad
08-23-12:53-good
08-23-13:31-good
08-23-19:22-good
08-24-14:44-bad
08-25-12:29-bad
08-26-12:34-bad
08-27-12:43-bad
08-27-12:51-bad
08-27-18:26-bad
08-28-12:10-bad
08-29-11:38-bad
08-30-22:13-bad
08-31-12:50-bad
09-01-12:53-bad
09-01-17:47-good
09-02-12:42-bad
09-02-18:27-bad
09-03-11:56-bad
09-04-13:40-bad
09-04-22:23-bad
09-05-21:42-good
09-06-16:42-bad
09-07-14:13-bad
09-08-14:21-bad
09-09-13:47-bad
09-10-12:24-bad
09-10-23:33-bad
09-11-14:07-bad
09-12-01:43-bad
09-12-12:29-bad
09-12-23:11-bad
09-12-23:42-bad
09-13-01:11-bad
09-13-13:45-bad
09-13-17:53-bad
09-13-18:01-bad
09-13-19:13-bad
10-18-00:59-bad
10-18-17:07-bad
10-18-17:14-bad
10-18-17:19-bad

There are no significant kernel log differences between *good and *bad
(excluding the AHCI messages). Sometimes the exceptions were sporadic,
like in 09-01-12:53-bad case:

Sep  1 12:53:38 Machine booted
Sep  1 13:02:33 ata8: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
Sep  1 13:02:33 ata8: irq_stat 0x00000040, connection status changed
Sep  1 13:02:33 ata8: SError: { CommWake DevExch }
Sep  1 13:02:33 ata8: hard resetting link
Sep  1 13:02:34 ata8: SATA link down (SStatus 0 SControl 300)
Sep  1 13:02:34 ata8: EH complete
Sep  1 15:47:12 Machine rebooted

Perhaps I should really check these resistors around the JMB363 chip,
and maybe using a vacuum cleaner is a good idea? I think I will do.

It's certaing there was nothing connected do JMB363 SATA. I don't know
BIOS versions and CMOS (BIOS) configs.
-- 
Krzysztof Halasa
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/