[PATCH 01/28] asus-laptop: add wireless and bluetooth status parameter

From: Corentin Chary
Date: Tue Feb 02 2010 - 02:47:31 EST


These to parameter allow to set the status of wlan and bluetooth
device when the module load. On some models, the device will
always be down on boot, so the default behavior is to always
enable these devices.

Signed-off-by: Corentin Chary <corentincj@xxxxxxxxxx>
---
drivers/platform/x86/asus-laptop.c | 19 +++++++++++++++++--
1 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 61a1c75..1d799b3 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -113,6 +113,19 @@ static uint wapf = 1;
module_param(wapf, uint, 0644);
MODULE_PARM_DESC(wapf, "WAPF value");

+static uint wireless_status = 1;
+static uint bluetooth_status = 1;
+
+module_param(wireless_status, uint, 0644);
+MODULE_PARM_DESC(wireless_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
+module_param(bluetooth_status, uint, 0644);
+MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
#define ASUS_HANDLE(object, paths...) \
static acpi_handle object##_handle = NULL; \
static char *object##_paths[] = { paths }
@@ -1272,8 +1285,10 @@ static int asus_hotk_add(struct acpi_device *device)
asus_hotk_found = 1;

/* WLED and BLED are on by default */
- write_status(bt_switch_handle, 1, BT_ON);
- write_status(wl_switch_handle, 1, WL_ON);
+ if (bluetooth_status != -1)
+ write_status(bt_switch_handle, !!bluetooth_status, BT_ON);
+ if (wireless_status != -1)
+ write_status(wl_switch_handle, !!wireless_status, WL_ON);

/* If the h/w switch is off, we need to check the real status */
write_status(NULL, read_status(BT_ON), BT_ON);
--
1.6.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/