[PATCH 1/6] dmfe: trivial cleanups:
From: Maxim Levitsky
Date: Sat Feb 06 2010 - 15:20:00 EST
* Create header file
* Add dmfe_ prefix to all functions
* Move functions to be in more logical order
* Remove useless DEVICE define
This patch doesn't bring any functional changes
Signed-off-by: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
---
drivers/net/tulip/dmfe.c | 1706 +++++++++++++++++++++-------------------------
drivers/net/tulip/dmfe.h | 305 +++++++++
2 files changed, 1077 insertions(+), 934 deletions(-)
create mode 100644 drivers/net/tulip/dmfe.h
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 6f44ebf..158ffc2 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -61,10 +61,6 @@
Test and make sure PCI latency is now correct for all cases.
*/
-#define DRV_NAME "dmfe"
-#define DRV_VERSION "1.36.4"
-#define DRV_RELDATE "2002-01-17"
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -87,210 +83,16 @@
#include <linux/bitops.h>
#include <asm/processor.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/dma.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/irq.h>
+#include "dmfe.h"
#ifdef CONFIG_TULIP_DM910X
#include <linux/of.h>
#endif
-
-/* Board/System/Debug information/definition ---------------- */
-#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
-#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */
-#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */
-#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */
-
-#define DM9102_IO_SIZE 0x80
-#define DM9102A_IO_SIZE 0x100
-#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */
-#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
-#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */
-#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
-#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
-#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
-#define TX_BUF_ALLOC 0x600
-#define RX_ALLOC_SIZE 0x620
-#define DM910X_RESET 1
-#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */
-#define CR6_DEFAULT 0x00080000 /* HD */
-#define CR7_DEFAULT 0x180c1
-#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
-#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
-#define MAX_PACKET_SIZE 1514
-#define DMFE_MAX_MULTICAST 14
-#define RX_COPY_SIZE 100
-#define MAX_CHECK_PACKET 0x8000
-#define DM9801_NOISE_FLOOR 8
-#define DM9802_NOISE_FLOOR 5
-
-#define DMFE_WOL_LINKCHANGE 0x20000000
-#define DMFE_WOL_SAMPLEPACKET 0x10000000
-#define DMFE_WOL_MAGICPACKET 0x08000000
-
-
-#define DMFE_10MHF 0
-#define DMFE_100MHF 1
-#define DMFE_10MFD 4
-#define DMFE_100MFD 5
-#define DMFE_AUTO 8
-#define DMFE_1M_HPNA 0x10
-
-#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */
-#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */
-#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */
-#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */
-#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */
-#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */
-
-#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
-#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
-#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
-
-#define DMFE_DBUG(dbug_now, msg, value) \
- do { \
- if (dmfe_debug || (dbug_now)) \
- printk(KERN_ERR DRV_NAME ": %s %lx\n",\
- (msg), (long) (value)); \
- } while (0)
-
-#define SHOW_MEDIA_TYPE(mode) \
- printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \
- (mode & 1) ? "100":"10", (mode & 4) ? "full":"half");
-
-
-/* CR9 definition: SROM/MII */
-#define CR9_SROM_READ 0x4800
-#define CR9_SRCS 0x1
-#define CR9_SRCLK 0x2
-#define CR9_CRDOUT 0x8
-#define SROM_DATA_0 0x0
-#define SROM_DATA_1 0x4
-#define PHY_DATA_1 0x20000
-#define PHY_DATA_0 0x00000
-#define MDCLKH 0x10000
-
-#define PHY_POWER_DOWN 0x800
-
-#define SROM_V41_CODE 0x14
-
-#define SROM_CLK_WRITE(data, ioaddr) \
- outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
- udelay(5); \
- outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
- udelay(5); \
- outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
- udelay(5);
-
-#define __CHK_IO_SIZE(pci_id, dev_rev) \
- (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
- DM9102A_IO_SIZE: DM9102_IO_SIZE)
-
-#define CHK_IO_SIZE(pci_dev) \
- (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
- (pci_dev)->revision))
-
-/* Sten Check */
-#define DEVICE net_device
-
-/* Structure/enum declaration ------------------------------- */
-struct tx_desc {
- __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
- char *tx_buf_ptr; /* Data for us */
- struct tx_desc *next_tx_desc;
-} __attribute__(( aligned(32) ));
-
-struct rx_desc {
- __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
- struct sk_buff *rx_skb_ptr; /* Data for us */
- struct rx_desc *next_rx_desc;
-} __attribute__(( aligned(32) ));
-
-struct dmfe_board_info {
- u32 chip_id; /* Chip vendor/Device ID */
- u8 chip_revision; /* Chip revision */
- struct DEVICE *next_dev; /* next device */
- struct pci_dev *pdev; /* PCI device */
- spinlock_t lock;
-
- long ioaddr; /* I/O base address */
- u32 cr0_data;
- u32 cr5_data;
- u32 cr6_data;
- u32 cr7_data;
- u32 cr15_data;
-
- /* pointer for memory physical address */
- dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
- dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
- dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
- dma_addr_t first_tx_desc_dma;
- dma_addr_t first_rx_desc_dma;
-
- /* descriptor pointer */
- unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
- unsigned char *buf_pool_start; /* Tx buffer pool align dword */
- unsigned char *desc_pool_ptr; /* descriptor pool memory */
- struct tx_desc *first_tx_desc;
- struct tx_desc *tx_insert_ptr;
- struct tx_desc *tx_remove_ptr;
- struct rx_desc *first_rx_desc;
- struct rx_desc *rx_insert_ptr;
- struct rx_desc *rx_ready_ptr; /* packet come pointer */
- unsigned long tx_packet_cnt; /* transmitted packet count */
- unsigned long tx_queue_cnt; /* wait to send packet count */
- unsigned long rx_avail_cnt; /* available rx descriptor count */
- unsigned long interval_rx_cnt; /* rx packet count a callback time */
-
- u16 HPNA_command; /* For HPNA register 16 */
- u16 HPNA_timer; /* For HPNA remote device check */
- u16 dbug_cnt;
- u16 NIC_capability; /* NIC media capability */
- u16 PHY_reg4; /* Saved Phyxcer register 4 value */
-
- u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */
- u8 chip_type; /* Keep DM9102A chip type */
- u8 media_mode; /* user specify media mode */
- u8 op_mode; /* real work media mode */
- u8 phy_addr;
- u8 wait_reset; /* Hardware failed, need to reset */
- u8 dm910x_chk_mode; /* Operating mode check */
- u8 first_in_callback; /* Flag to record state */
- u8 wol_mode; /* user WOL settings */
- struct timer_list timer;
-
- /* Driver defined statistic counter */
- unsigned long tx_fifo_underrun;
- unsigned long tx_loss_carrier;
- unsigned long tx_no_carrier;
- unsigned long tx_late_collision;
- unsigned long tx_excessive_collision;
- unsigned long tx_jabber_timeout;
- unsigned long reset_count;
- unsigned long reset_cr8;
- unsigned long reset_fatal;
- unsigned long reset_TXtimeout;
-
- /* NIC SROM data */
- unsigned char srom[128];
-};
-
-enum dmfe_offsets {
- DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
- DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
- DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
- DCR15 = 0x78
-};
-
-enum dmfe_CR6_bits {
- CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
- CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
- CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
-};
-
-/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version "
@@ -313,251 +115,11 @@ static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control
4: TX pause packet */
-/* function declaration ------------------------------------- */
-static int dmfe_open(struct DEVICE *);
-static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
-static int dmfe_stop(struct DEVICE *);
-static void dmfe_set_filter_mode(struct DEVICE *);
-static const struct ethtool_ops netdev_ethtool_ops;
-static u16 read_srom_word(long ,int);
-static irqreturn_t dmfe_interrupt(int , void *);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void poll_dmfe (struct net_device *dev);
-#endif
-static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
-static void allocate_rx_buffer(struct dmfe_board_info *);
-static void update_cr6(u32, unsigned long);
-static void send_filter_frame(struct DEVICE * ,int);
-static void dm9132_id_table(struct DEVICE * ,int);
-static u16 phy_read(unsigned long, u8, u8, u32);
-static void phy_write(unsigned long, u8, u8, u16, u32);
-static void phy_write_1bit(unsigned long, u32);
-static u16 phy_read_1bit(unsigned long);
-static u8 dmfe_sense_speed(struct dmfe_board_info *);
-static void dmfe_process_mode(struct dmfe_board_info *);
-static void dmfe_timer(unsigned long);
-static inline u32 cal_CRC(unsigned char *, unsigned int, u8);
-static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *);
-static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *);
-static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *);
-static void dmfe_dynamic_reset(struct DEVICE *);
-static void dmfe_free_rxbuffer(struct dmfe_board_info *);
-static void dmfe_init_dm910x(struct DEVICE *);
-static void dmfe_parse_srom(struct dmfe_board_info *);
-static void dmfe_program_DM9801(struct dmfe_board_info *, int);
-static void dmfe_program_DM9802(struct dmfe_board_info *);
-static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
-static void dmfe_set_phyxcer(struct dmfe_board_info *);
-
-/* DM910X network board routine ---------------------------- */
-
-static const struct net_device_ops netdev_ops = {
- .ndo_open = dmfe_open,
- .ndo_stop = dmfe_stop,
- .ndo_start_xmit = dmfe_start_xmit,
- .ndo_set_multicast_list = dmfe_set_filter_mode,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = poll_dmfe,
-#endif
-};
-
/*
- * Search DM910X board ,allocate space and register it
+ * Open routine, called on first access to the device
*/
-static int __devinit dmfe_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct dmfe_board_info *db; /* board information structure */
- struct net_device *dev;
- u32 pci_pmr;
- int i, err;
-
- DMFE_DBUG(0, "dmfe_init_one()", 0);
-
- if (!printed_version++)
- printk(version);
-
- /*
- * SPARC on-board DM910x chips should be handled by the main
- * tulip driver, except for early DM9100s.
- */
-#ifdef CONFIG_TULIP_DM910X
- if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) ||
- ent->driver_data == PCI_DM9102_ID) {
- struct device_node *dp = pci_device_to_OF_node(pdev);
-
- if (dp && of_get_property(dp, "local-mac-address", NULL)) {
- printk(KERN_INFO DRV_NAME
- ": skipping on-board DM910x (use tulip)\n");
- return -ENODEV;
- }
- }
-#endif
-
- /* Init network device */
- dev = alloc_etherdev(sizeof(*db));
- if (dev == NULL)
- return -ENOMEM;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING DRV_NAME
- ": 32-bit PCI DMA not available.\n");
- err = -ENODEV;
- goto err_out_free;
- }
-
- /* Enable Master/IO access, Disable memory access */
- err = pci_enable_device(pdev);
- if (err)
- goto err_out_free;
-
- if (!pci_resource_start(pdev, 0)) {
- printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
- err = -ENODEV;
- goto err_out_disable;
- }
-
- if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
- printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
- err = -ENODEV;
- goto err_out_disable;
- }
-
-#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */
-
- /* Set Latency Timer 80h */
- /* FIXME: setting values > 32 breaks some SiS 559x stuff.
- Need a PCI quirk.. */
-
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
-#endif
-
- if (pci_request_regions(pdev, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
- err = -ENODEV;
- goto err_out_disable;
- }
-
- /* Init system & device */
- db = netdev_priv(dev);
-
- /* Allocate Tx/Rx descriptor memory */
- db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
- DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
- if (!db->desc_pool_ptr)
- goto err_out_res;
-
- db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
- TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
- if (!db->buf_pool_ptr)
- goto err_out_free_desc;
-
- db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
- db->first_tx_desc_dma = db->desc_pool_dma_ptr;
- db->buf_pool_start = db->buf_pool_ptr;
- db->buf_pool_dma_start = db->buf_pool_dma_ptr;
-
- db->chip_id = ent->driver_data;
- db->ioaddr = pci_resource_start(pdev, 0);
- db->chip_revision = pdev->revision;
- db->wol_mode = 0;
-
- db->pdev = pdev;
-
- dev->base_addr = db->ioaddr;
- dev->irq = pdev->irq;
- pci_set_drvdata(pdev, dev);
- dev->netdev_ops = &netdev_ops;
- dev->ethtool_ops = &netdev_ethtool_ops;
- netif_carrier_off(dev);
- spin_lock_init(&db->lock);
-
- pci_read_config_dword(pdev, 0x50, &pci_pmr);
- pci_pmr &= 0x70000;
- if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
- db->chip_type = 1; /* DM9102A E3 */
- else
- db->chip_type = 0;
-
- /* read 64 word srom data */
- for (i = 0; i < 64; i++)
- ((__le16 *) db->srom)[i] =
- cpu_to_le16(read_srom_word(db->ioaddr, i));
-
- /* Set Node address */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = db->srom[20 + i];
-
- err = register_netdev (dev);
- if (err)
- goto err_out_free_buf;
-
- printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, %pM, irq %d.\n",
- dev->name,
- ent->driver_data >> 16,
- pci_name(pdev),
- dev->dev_addr,
- dev->irq);
-
- pci_set_master(pdev);
-
- return 0;
-
-err_out_free_buf:
- pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
- db->buf_pool_ptr, db->buf_pool_dma_ptr);
-err_out_free_desc:
- pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
- db->desc_pool_ptr, db->desc_pool_dma_ptr);
-err_out_res:
- pci_release_regions(pdev);
-err_out_disable:
- pci_disable_device(pdev);
-err_out_free:
- pci_set_drvdata(pdev, NULL);
- free_netdev(dev);
-
- return err;
-}
-
-
-static void __devexit dmfe_remove_one (struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct dmfe_board_info *db = netdev_priv(dev);
-
- DMFE_DBUG(0, "dmfe_remove_one()", 0);
-
- if (dev) {
-
- unregister_netdev(dev);
-
- pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
- DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
- db->desc_pool_dma_ptr);
- pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
- db->buf_pool_ptr, db->buf_pool_dma_ptr);
- pci_release_regions(pdev);
- free_netdev(dev); /* free board information */
-
- pci_set_drvdata(pdev, NULL);
- }
-
- DMFE_DBUG(0, "dmfe_remove_one() exit", 0);
-}
-
-
-/*
- * Open the interface.
- * The interface is opened whenever "ifconfig" actives it.
- */
-
-static int dmfe_open(struct DEVICE *dev)
+static int dmfe_open(struct net_device *dev)
{
int ret;
struct dmfe_board_info *db = netdev_priv(dev);
@@ -581,19 +143,19 @@ static int dmfe_open(struct DEVICE *dev)
db->PHY_reg4 = 0x1e0;
/* CR6 operation mode decision */
- if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
- (db->chip_revision >= 0x30) ) {
- db->cr6_data |= DMFE_TXTH_256;
+ if (!chkmode || (db->chip_id == PCI_DM9132_ID) ||
+ (db->chip_revision >= 0x30)) {
+ db->cr6_data |= DMFE_TXTH_256;
db->cr0_data = CR0_DEFAULT;
- db->dm910x_chk_mode=4; /* Enter the normal mode */
- } else {
+ db->dm910x_chk_mode = 4; /* Enter the normal mode */
+ } else {
db->cr6_data |= CR6_SFT; /* Store & Forward mode */
db->cr0_data = 0;
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
/* Initilize DM910X board */
- dmfe_init_dm910x(dev);
+ dmfe_hardware_init(dev);
/* Active System Interface */
netif_wake_queue(dev);
@@ -609,6 +171,40 @@ static int dmfe_open(struct DEVICE *dev)
}
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+
+static int dmfe_stop(struct net_device *dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ DMFE_DBUG(0, "dmfe_stop", 0);
+
+ /* disable system */
+ netif_stop_queue(dev);
+
+ /* deleted timer */
+ del_timer_sync(&db->timer);
+
+ /* Reset & stop DM910X board */
+ outl(DM910X_RESET, ioaddr + DCR0);
+ udelay(5);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+ /* free interrupt */
+ free_irq(dev->irq, dev);
+
+ /* free allocated rx buffer */
+ dmfe_free_rxbuffer(db);
+
+ return 0;
+}
+
+
+
/* Initilize DM910X board
* Reset DM910X board
* Initilize TX/Rx descriptor chain structure
@@ -616,12 +212,12 @@ static int dmfe_open(struct DEVICE *dev)
* Enable Tx/Rx machine
*/
-static void dmfe_init_dm910x(struct DEVICE *dev)
+static void dmfe_hardware_init(struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
unsigned long ioaddr = db->ioaddr;
- DMFE_DBUG(0, "dmfe_init_dm910x()", 0);
+ DMFE_DBUG(0, "dmfe_hardware_init()", 0);
/* Reset DM910x MAC controller */
outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */
@@ -645,24 +241,24 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
outl(0x0, ioaddr + DCR12); /* Clear RESET signal */
/* Process Phyxcer Media Mode */
- if ( !(db->media_mode & 0x10) ) /* Force 1M mode */
+ if (!(db->media_mode & 0x10)) /* Force 1M mode */
dmfe_set_phyxcer(db);
/* Media Mode Process */
- if ( !(db->media_mode & DMFE_AUTO) )
+ if (!(db->media_mode & DMFE_AUTO))
db->op_mode = db->media_mode; /* Force Mode */
/* Initiliaze Transmit/Receive decriptor and CR3/4 */
- dmfe_descriptor_init(db, ioaddr);
+ dmfe_descriptor_init(db);
/* Init CR6 to program DM910x operation */
- update_cr6(db->cr6_data, ioaddr);
+ dmfe_update_cr6(db->cr6_data, ioaddr);
/* Send setup frame */
if (db->chip_id == PCI_DM9132_ID)
dm9132_id_table(dev, dev->mc_count); /* DM9132 */
else
- send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
+ dmfe_send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
@@ -673,7 +269,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
/* Enable DM910X Tx/Rx function */
db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000;
- update_cr6(db->cr6_data, ioaddr);
+ dmfe_update_cr6(db->cr6_data, ioaddr);
}
@@ -683,7 +279,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
*/
static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
- struct DEVICE *dev)
+ struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
@@ -723,7 +319,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
db->tx_insert_ptr = txptr->next_tx_desc;
/* Transmit Packet Process */
- if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) {
+ if ((!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT)) {
txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
db->tx_packet_cnt++; /* Ready to send */
outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
@@ -734,7 +330,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
}
/* Tx resource check */
- if ( db->tx_queue_cnt < TX_FREE_DESC_CNT )
+ if (db->tx_queue_cnt < TX_FREE_DESC_CNT)
netif_wake_queue(dev);
/* Restore CR7 to enable interrupt */
@@ -749,56 +345,13 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
/*
- * Stop the interface.
- * The interface is stopped when it is brought.
- */
-
-static int dmfe_stop(struct DEVICE *dev)
-{
- struct dmfe_board_info *db = netdev_priv(dev);
- unsigned long ioaddr = dev->base_addr;
-
- DMFE_DBUG(0, "dmfe_stop", 0);
-
- /* disable system */
- netif_stop_queue(dev);
-
- /* deleted timer */
- del_timer_sync(&db->timer);
-
- /* Reset & stop DM910X board */
- outl(DM910X_RESET, ioaddr + DCR0);
- udelay(5);
- phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
-
- /* free interrupt */
- free_irq(dev->irq, dev);
-
- /* free allocated rx buffer */
- dmfe_free_rxbuffer(db);
-
-#if 0
- /* show statistic counter */
- printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx"
- " LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
- db->tx_fifo_underrun, db->tx_excessive_collision,
- db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
- db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
- db->reset_fatal, db->reset_TXtimeout);
-#endif
-
- return 0;
-}
-
-
-/*
* DM9102 insterrupt handler
* receive the packet to upper layer, free the transmitted packet
*/
static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
{
- struct DEVICE *dev = dev_id;
+ struct net_device *dev = dev_id;
struct dmfe_board_info *db = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
unsigned long flags;
@@ -810,7 +363,7 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
/* Got DM910X status */
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
- if ( !(db->cr5_data & 0xc1) ) {
+ if (!(db->cr5_data & 0xc1)) {
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
@@ -829,22 +382,22 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
}
/* Received the coming packet */
- if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+ if ((db->cr5_data & 0x40) && db->rx_avail_cnt)
dmfe_rx_packet(dev, db);
/* reallocate rx descriptor buffer */
- if (db->rx_avail_cnt<RX_DESC_CNT)
- allocate_rx_buffer(db);
+ if (db->rx_avail_cnt < RX_DESC_CNT)
+ dmfe_allocate_rx_buffer(db);
/* Free the transmitted descriptor */
- if ( db->cr5_data & 0x01)
+ if (db->cr5_data & 0x01)
dmfe_free_tx_pkt(dev, db);
/* Mode Check */
if (db->dm910x_chk_mode & 0x2) {
db->dm910x_chk_mode = 0x4;
db->cr6_data |= 0x100;
- update_cr6(db->cr6_data, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
}
/* Restore CR7 to enable interrupt mask */
@@ -862,12 +415,12 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
* the interrupt routine is executing.
*/
-static void poll_dmfe (struct net_device *dev)
+static void dmfe_poll(struct net_device *dev)
{
/* disable_irq here is not very nice, but with the lockless
interrupt handler we have no other choice. */
disable_irq(dev->irq);
- dmfe_interrupt (dev->irq, dev);
+ dmfe_interrupt(dev->irq, dev);
enable_irq(dev->irq);
}
#endif
@@ -876,16 +429,18 @@ static void poll_dmfe (struct net_device *dev)
* Free TX resource after TX complete
*/
-static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
+static void dmfe_free_tx_pkt(struct net_device *dev,
+ struct dmfe_board_info *db)
{
struct tx_desc *txptr;
unsigned long ioaddr = dev->base_addr;
u32 tdes0;
- txptr = db->tx_remove_ptr;
- while(db->tx_packet_cnt) {
+ for (txptr = db->tx_remove_ptr; db->tx_packet_cnt;
+ txptr = txptr->next_tx_desc) {
+
tdes0 = le32_to_cpu(txptr->tdes0);
- /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+
if (tdes0 & 0x80000000)
break;
@@ -894,41 +449,43 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
dev->stats.tx_packets++;
/* Transmit statistic counter */
- if ( tdes0 != 0x7fffffff ) {
- /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
- dev->stats.collisions += (tdes0 >> 3) & 0xf;
- dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
- if (tdes0 & TDES0_ERR_MASK) {
- dev->stats.tx_errors++;
-
- if (tdes0 & 0x0002) { /* UnderRun */
- db->tx_fifo_underrun++;
- if ( !(db->cr6_data & CR6_SFT) ) {
- db->cr6_data = db->cr6_data | CR6_SFT;
- update_cr6(db->cr6_data, db->ioaddr);
- }
- }
- if (tdes0 & 0x0100)
- db->tx_excessive_collision++;
- if (tdes0 & 0x0200)
- db->tx_late_collision++;
- if (tdes0 & 0x0400)
- db->tx_no_carrier++;
- if (tdes0 & 0x0800)
- db->tx_loss_carrier++;
- if (tdes0 & 0x4000)
- db->tx_jabber_timeout++;
+ if (tdes0 == 0x7fffffff)
+ continue;
+
+ dev->stats.collisions += (tdes0 >> 3) & 0xf;
+ dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+
+ if (!(tdes0 & TDES0_ERR_MASK))
+ continue;
+
+ dev->stats.tx_errors++;
+
+ if (tdes0 & 0x0002) { /* UnderRun */
+ db->tx_fifo_underrun++;
+
+ if (!(db->cr6_data & CR6_SFT)) {
+ db->cr6_data = db->cr6_data | CR6_SFT;
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
}
}
- txptr = txptr->next_tx_desc;
- }/* End of while */
+ if (tdes0 & 0x0100)
+ db->tx_excessive_collision++;
+ if (tdes0 & 0x0200)
+ db->tx_late_collision++;
+ if (tdes0 & 0x0400)
+ db->tx_no_carrier++;
+ if (tdes0 & 0x0800)
+ db->tx_loss_carrier++;
+ if (tdes0 & 0x4000)
+ db->tx_jabber_timeout++;
+ }
/* Update TX remove pointer to next */
db->tx_remove_ptr = txptr;
/* Send the Tx packet in queue */
- if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) {
+ if ((db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt) {
txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
db->tx_packet_cnt++; /* Ready to send */
db->tx_queue_cnt--;
@@ -937,40 +494,27 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
}
/* Resource available check */
- if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT )
+ if (db->tx_queue_cnt < TX_WAKE_DESC_CNT)
netif_wake_queue(dev); /* Active upper layer, send again */
}
/*
- * Calculate the CRC valude of the Rx packet
- * flag = 1 : return the reverse CRC (for the received packet CRC)
- * 0 : return the normal CRC (for Hash Table index)
- */
-
-static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
-{
- u32 crc = crc32(~0, Data, Len);
- if (flag) crc = ~crc;
- return crc;
-}
-
-
-/*
* Receive the come packet and pass to upper layer
*/
-static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
+static void dmfe_rx_packet(struct net_device *dev, struct dmfe_board_info *db)
{
struct rx_desc *rxptr;
struct sk_buff *skb, *newskb;
int rxlen;
u32 rdes0;
- rxptr = db->rx_ready_ptr;
-
- while(db->rx_avail_cnt) {
+ for (rxptr = db->rx_ready_ptr; db->rx_avail_cnt;
+ rxptr = rxptr->next_rx_desc) {
rdes0 = le32_to_cpu(rxptr->rdes0);
+
+
if (rdes0 & 0x80000000) /* packet owner check */
break;
@@ -980,71 +524,75 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2),
RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
- if ( (rdes0 & 0x300) != 0x300) {
- /* A packet without First/Last flag */
- /* reuse this SKB */
+
+ /* A packet without First/Last flag */
+ /* reuse this SKB */
+ if ((rdes0 & 0x300) != 0x300) {
DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
- } else {
- /* A packet with First/Last flag */
- rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
-
- /* error summary bit check */
- if (rdes0 & 0x8000) {
- /* This is a error packet */
- //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
- dev->stats.rx_errors++;
- if (rdes0 & 1)
- dev->stats.rx_fifo_errors++;
- if (rdes0 & 2)
- dev->stats.rx_crc_errors++;
- if (rdes0 & 0x80)
- dev->stats.rx_length_errors++;
- }
+ continue;
+ }
+
+ /* A packet with First/Last flag */
+ rxlen = ((rdes0 >> 16) & 0x3fff) - 4;
- if ( !(rdes0 & 0x8000) ||
- ((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
- skb = rxptr->rx_skb_ptr;
-
- /* Received Packet CRC check need or not */
- if ( (db->dm910x_chk_mode & 1) &&
- (cal_CRC(skb->data, rxlen, 1) !=
- (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */
- /* Found a error received packet */
- dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
- db->dm910x_chk_mode = 3;
- } else {
- /* Good packet, send to upper layer */
- /* Shorst packet used new SKB */
- if ((rxlen < RX_COPY_SIZE) &&
- ((newskb = dev_alloc_skb(rxlen + 2))
- != NULL)) {
-
- skb = newskb;
- /* size less than COPY_SIZE, allocate a rxlen SKB */
- skb_reserve(skb, 2); /* 16byte align */
- skb_copy_from_linear_data(rxptr->rx_skb_ptr,
- skb_put(skb, rxlen),
- rxlen);
- dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
- } else
- skb_put(skb, rxlen);
-
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += rxlen;
- }
- } else {
- /* Reuse SKB buffer when the packet is error */
+
+ /* This is a error packet */
+ if (rdes0 & 0x8000) {
+ dev->stats.rx_errors++;
+ if (rdes0 & 1)
+ dev->stats.rx_fifo_errors++;
+ if (rdes0 & 2)
+ dev->stats.rx_crc_errors++;
+ if (rdes0 & 0x80)
+ dev->stats.rx_length_errors++;
+
+ if (!(db->cr6_data & CR6_PM) || rxlen <= 6) {
DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
}
+ continue;
}
- rxptr = rxptr->next_rx_desc;
- }
+ /* Received Packet CRC check need or not */
+ if (db->dm910x_chk_mode & 1) {
+
+ /* FIXME (?) */
+ if (cal_CRC(skb->data, rxlen, 1)
+ != (*(u32 *) (skb->data+rxlen))) {
+ /* Found a error received packet */
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+ db->dm910x_chk_mode = 3;
+ }
+ continue;
+ }
+
+ skb = rxptr->rx_skb_ptr;
+
+ /* Good packet, send to upper layer */
+ /* Shorst packet used new SKB */
+ if (rxlen < RX_COPY_SIZE)
+ newskb = dev_alloc_skb(rxlen + 2);
+
+
+ if (rxlen < RX_COPY_SIZE && newskb) {
+
+ skb = newskb;
+ /* size less than COPY_SIZE, allocate a rxlen SKB */
+ skb_reserve(skb, 2); /* 16byte align */
+ skb_copy_from_linear_data(rxptr->rx_skb_ptr,
+ skb_put(skb, rxlen),
+ rxlen);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else
+ skb_put(skb, rxlen);
+
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += rxlen;
+ }
db->rx_ready_ptr = rxptr;
}
@@ -1052,7 +600,7 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
* Set DM910X multicast address
*/
-static void dmfe_set_filter_mode(struct DEVICE * dev)
+static void dmfe_set_filter_mode(struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
unsigned long flags;
@@ -1063,7 +611,7 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
if (dev->flags & IFF_PROMISC) {
DMFE_DBUG(0, "Enable PROM Mode", 0);
db->cr6_data |= CR6_PM | CR6_PBF;
- update_cr6(db->cr6_data, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
spin_unlock_irqrestore(&db->lock, flags);
return;
}
@@ -1080,60 +628,11 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
if (db->chip_id == PCI_DM9132_ID)
dm9132_id_table(dev, dev->mc_count); /* DM9132 */
else
- send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
+ dmfe_send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
spin_unlock_irqrestore(&db->lock, flags);
}
/*
- * Ethtool interace
- */
-
-static void dmfe_ethtool_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct dmfe_board_info *np = netdev_priv(dev);
-
- strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
- if (np->pdev)
- strcpy(info->bus_info, pci_name(np->pdev));
- else
- sprintf(info->bus_info, "EISA 0x%lx %d",
- dev->base_addr, dev->irq);
-}
-
-static int dmfe_ethtool_set_wol(struct net_device *dev,
- struct ethtool_wolinfo *wolinfo)
-{
- struct dmfe_board_info *db = netdev_priv(dev);
-
- if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
- WAKE_ARP | WAKE_MAGICSECURE))
- return -EOPNOTSUPP;
-
- db->wol_mode = wolinfo->wolopts;
- return 0;
-}
-
-static void dmfe_ethtool_get_wol(struct net_device *dev,
- struct ethtool_wolinfo *wolinfo)
-{
- struct dmfe_board_info *db = netdev_priv(dev);
-
- wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
- wolinfo->wolopts = db->wol_mode;
- return;
-}
-
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = dmfe_ethtool_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .set_wol = dmfe_ethtool_set_wol,
- .get_wol = dmfe_ethtool_get_wol,
-};
-
-/*
* A periodic timer routine
* Dynamic media sense, allocate Rx buffer...
*/
@@ -1142,9 +641,9 @@ static void dmfe_timer(unsigned long data)
{
u32 tmp_cr8;
unsigned char tmp_cr12;
- struct DEVICE *dev = (struct DEVICE *) data;
+ struct net_device *dev = (struct net_device *) data;
struct dmfe_board_info *db = netdev_priv(dev);
- unsigned long flags;
+ unsigned long flags;
int link_ok, link_ok_phy;
@@ -1154,13 +653,13 @@ static void dmfe_timer(unsigned long data)
/* Media mode process when Link OK before enter this route */
if (db->first_in_callback == 0) {
db->first_in_callback = 1;
- if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
+ if (db->chip_type && (db->chip_id == PCI_DM9102_ID)) {
db->cr6_data &= ~0x40000;
- update_cr6(db->cr6_data, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
phy_write(db->ioaddr,
db->phy_addr, 0, 0x1000, db->chip_id);
db->cr6_data |= 0x40000;
- update_cr6(db->cr6_data, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
add_timer(&db->timer);
spin_unlock_irqrestore(&db->lock, flags);
@@ -1168,27 +667,26 @@ static void dmfe_timer(unsigned long data)
}
}
-
/* Operating Mode Check */
- if ( (db->dm910x_chk_mode & 0x1) &&
- (dev->stats.rx_packets > MAX_CHECK_PACKET) )
+ if ((db->dm910x_chk_mode & 0x1) &&
+ (dev->stats.rx_packets > MAX_CHECK_PACKET))
db->dm910x_chk_mode = 0x4;
/* Dynamic reset DM910X : system error or transmit time-out */
tmp_cr8 = inl(db->ioaddr + DCR8);
- if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+ if ((db->interval_rx_cnt == 0) && (tmp_cr8)) {
db->reset_cr8++;
db->wait_reset = 1;
}
db->interval_rx_cnt = 0;
/* TX polling kick monitor */
- if ( db->tx_packet_cnt &&
- time_after(jiffies, dev->trans_start + DMFE_TX_KICK) ) {
+ if (db->tx_packet_cnt &&
+ time_after(jiffies, dev->trans_start + DMFE_TX_KICK)) {
outl(0x1, dev->base_addr + DCR1); /* Tx polling again */
/* TX Timeout */
- if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) {
+ if (time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT)) {
db->reset_TXtimeout++;
db->wait_reset = 1;
printk(KERN_WARNING "%s: Tx timeout - resetting\n",
@@ -1213,17 +711,16 @@ static void dmfe_timer(unsigned long data)
else
tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
- if ( ((db->chip_id == PCI_DM9102_ID) &&
+ if (((db->chip_id == PCI_DM9102_ID) &&
(db->chip_revision == 0x30)) ||
((db->chip_id == PCI_DM9132_ID) &&
- (db->chip_revision == 0x10)) ) {
+ (db->chip_revision == 0x10))) {
/* DM9102A Chip */
if (tmp_cr12 & 2)
link_ok = 0;
else
link_ok = 1;
- }
- else
+ } else
/*0x43 is used instead of 0x3 because bit 6 should represent
link status of external PHY */
link_ok = (tmp_cr12 & 0x43) ? 1 : 0;
@@ -1235,39 +732,39 @@ static void dmfe_timer(unsigned long data)
*/
/* need a dummy read because of PHY's register latch*/
- phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id);
- link_ok_phy = (phy_read (db->ioaddr,
+ phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+ link_ok_phy = (phy_read(db->ioaddr,
db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0;
if (link_ok_phy != link_ok) {
- DMFE_DBUG (0, "PHY and chip report different link status", 0);
+ DMFE_DBUG(0, "PHY and chip report different link status", 0);
link_ok = link_ok | link_ok_phy;
- }
+ }
- if ( !link_ok && netif_carrier_ok(dev)) {
+ if (!link_ok && netif_carrier_ok(dev)) {
/* Link Failed */
DMFE_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
/* AUTO or force 1M Homerun/Longrun don't need */
- if ( !(db->media_mode & 0x38) )
+ if (!(db->media_mode & 0x38))
phy_write(db->ioaddr, db->phy_addr,
0, 0x1000, db->chip_id);
/* AUTO mode, if INT phyxcer link failed, select EXT device */
if (db->media_mode & DMFE_AUTO) {
/* 10/100M link failed, used 1M Home-Net */
- db->cr6_data|=0x00040000; /* bit18=1, MII */
- db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
- update_cr6(db->cr6_data, db->ioaddr);
+ db->cr6_data |= 0x00040000; /* bit18=1, MII */
+ db->cr6_data &= ~0x00000200; /* bit9=0, HD mode */
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
}
} else if (!netif_carrier_ok(dev)) {
- DMFE_DBUG(0, "Link link OK", tmp_cr12);
+ DMFE_DBUG(0, "Link OK", tmp_cr12);
/* Auto Sense Speed */
- if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) {
+ if (!(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) {
netif_carrier_on(dev);
SHOW_MEDIA_TYPE(db->op_mode);
}
@@ -1297,7 +794,7 @@ static void dmfe_timer(unsigned long data)
* Re-initilize DM910X board
*/
-static void dmfe_dynamic_reset(struct DEVICE *dev)
+static void dmfe_dynamic_reset(struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
@@ -1305,7 +802,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
/* Sopt MAC controller */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
- update_cr6(db->cr6_data, dev->base_addr);
+ dmfe_update_cr6(db->cr6_data, dev->base_addr);
outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
@@ -1323,7 +820,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
db->wait_reset = 0;
/* Re-initilize DM910X board */
- dmfe_init_dm910x(dev);
+ dmfe_hardware_init(dev);
/* Restart upper layer interface */
netif_wake_queue(dev);
@@ -1331,23 +828,6 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
/*
- * free all allocated rx buffer
- */
-
-static void dmfe_free_rxbuffer(struct dmfe_board_info * db)
-{
- DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0);
-
- /* free allocated rx buffer */
- while (db->rx_avail_cnt) {
- dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
- db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
- db->rx_avail_cnt--;
- }
-}
-
-
-/*
* Reuse the SK buffer
*/
@@ -1357,8 +837,8 @@ static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev,
- skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev,
+ skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE));
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
@@ -1373,13 +853,14 @@ static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
* Using Chain structure, and allocate Tx/Rx buffer
*/
-static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr)
+static void dmfe_descriptor_init(struct dmfe_board_info *db)
{
struct tx_desc *tmp_tx;
struct rx_desc *tmp_rx;
unsigned char *tmp_buf;
dma_addr_t tmp_tx_dma, tmp_rx_dma;
dma_addr_t tmp_buf_dma;
+ unsigned long ioaddr = db->ioaddr;
int i;
DMFE_DBUG(0, "dmfe_descriptor_init()", 0);
@@ -1403,7 +884,9 @@ static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioadd
tmp_buf = db->buf_pool_start;
tmp_buf_dma = db->buf_pool_dma_start;
tmp_tx_dma = db->first_tx_desc_dma;
- for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+ tmp_tx = db->first_tx_desc;
+
+ for (i = 0; i < TX_DESC_CNT ; i++, tmp_tx++) {
tmp_tx->tx_buf_ptr = tmp_buf;
tmp_tx->tdes0 = cpu_to_le32(0);
tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
@@ -1418,19 +901,70 @@ static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioadd
tmp_tx->next_tx_desc = db->first_tx_desc;
/* Init Receive descriptor chain */
- tmp_rx_dma=db->first_rx_desc_dma;
- for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+ tmp_rx_dma = db->first_rx_desc_dma;
+ tmp_rx = db->first_rx_desc;
+ for (i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
tmp_rx->rdes0 = cpu_to_le32(0);
tmp_rx->rdes1 = cpu_to_le32(0x01000600);
tmp_rx_dma += sizeof(struct rx_desc);
tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
tmp_rx->next_rx_desc = tmp_rx + 1;
}
+
(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
tmp_rx->next_rx_desc = db->first_rx_desc;
/* pre-allocate Rx buffer */
- allocate_rx_buffer(db);
+ dmfe_allocate_rx_buffer(db);
+}
+
+/*
+ * Allocate rx buffer,
+ * As possible as allocate maxiumn Rx buffer
+ */
+
+static void dmfe_allocate_rx_buffer(struct dmfe_board_info *db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+
+ rxptr = db->rx_insert_ptr;
+
+ while (db->rx_avail_cnt < RX_DESC_CNT) {
+
+ skb = dev_alloc_skb(RX_ALLOC_SIZE);
+
+ if (!skb)
+ break;
+
+ rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+ rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, skb->data,
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE));
+ wmb();
+
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ rxptr = rxptr->next_rx_desc;
+ db->rx_avail_cnt++;
+ }
+
+ db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ * free all allocated rx buffer
+ */
+
+static void dmfe_free_rxbuffer(struct dmfe_board_info *db)
+{
+ DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0);
+
+ /* free allocated rx buffer */
+ while (db->rx_avail_cnt) {
+ dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+ db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+ db->rx_avail_cnt--;
+ }
}
@@ -1439,7 +973,7 @@ static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioadd
* Firstly stop DM910X , then written value and start
*/
-static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+static void dmfe_update_cr6(u32 cr6_data, unsigned long ioaddr)
{
u32 cr6_tmp;
@@ -1456,10 +990,10 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
* This setup frame initilize DM910X address filter mode
*/
-static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
+static void dm9132_id_table(struct net_device *dev, int mc_cnt)
{
struct dev_mc_list *mcptr;
- u16 * addrptr;
+ u16 *addrptr;
unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */
u32 hash_val;
u16 i, hash_table[4];
@@ -1483,8 +1017,9 @@ static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
hash_table[3] = 0x8000;
/* the multicast address in Hash Table : 64 bits */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
- hash_val = cal_CRC( (char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ mcptr = dev->mc_list;
+ for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ hash_val = cal_CRC((char *)mcptr->dmi_addr, 6, 0) & 0x3f;
hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
}
@@ -1499,16 +1034,16 @@ static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
* This setup frame initilize DM910X address filter mode
*/
-static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
+static void dmfe_send_filter_frame(struct net_device *dev, int mc_cnt)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct dev_mc_list *mcptr;
struct tx_desc *txptr;
- u16 * addrptr;
- u32 * suptr;
+ u16 *addrptr;
+ u32 *suptr;
int i;
- DMFE_DBUG(0, "send_filter_frame()", 0);
+ DMFE_DBUG(0, "dmfe_send_filter_frame()", 0);
txptr = db->tx_insert_ptr;
suptr = (u32 *) txptr->tx_buf_ptr;
@@ -1525,14 +1060,16 @@ static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
*suptr++ = 0xffff;
/* fit the multicast address */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ mcptr = dev->mc_list;
+
+ for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
}
- for (; i<14; i++) {
+ for (; i < 14; i++) {
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;
@@ -1547,9 +1084,9 @@ static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
/* Resource Empty */
db->tx_packet_cnt++;
txptr->tdes0 = cpu_to_le32(0x80000000);
- update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+ dmfe_update_cr6(db->cr6_data | 0x2000, dev->base_addr);
outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
- update_cr6(db->cr6_data, dev->base_addr);
+ dmfe_update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
db->tx_queue_cnt++; /* Put in TX queue */
@@ -1557,107 +1094,54 @@ static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
/*
- * Allocate rx buffer,
- * As possible as allocate maxiumn Rx buffer
- */
-
-static void allocate_rx_buffer(struct dmfe_board_info *db)
-{
- struct rx_desc *rxptr;
- struct sk_buff *skb;
-
- rxptr = db->rx_insert_ptr;
-
- while(db->rx_avail_cnt < RX_DESC_CNT) {
- if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
- break;
- rxptr->rx_skb_ptr = skb; /* FIXME (?) */
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
- RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
- wmb();
- rxptr->rdes0 = cpu_to_le32(0x80000000);
- rxptr = rxptr->next_rx_desc;
- db->rx_avail_cnt++;
- }
-
- db->rx_insert_ptr = rxptr;
-}
-
-
-/*
- * Read one word data from the serial ROM
- */
-
-static u16 read_srom_word(long ioaddr, int offset)
-{
- int i;
- u16 srom_data = 0;
- long cr9_ioaddr = ioaddr + DCR9;
-
- outl(CR9_SROM_READ, cr9_ioaddr);
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
-
- /* Send the Read Command 110b */
- SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
- SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
- SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
-
- /* Send the offset */
- for (i = 5; i >= 0; i--) {
- srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
- SROM_CLK_WRITE(srom_data, cr9_ioaddr);
- }
-
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
-
- for (i = 16; i > 0; i--) {
- outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
- udelay(5);
- srom_data = (srom_data << 1) |
- ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
- udelay(5);
- }
-
- outl(CR9_SROM_READ, cr9_ioaddr);
- return srom_data;
-}
-
-
-/*
* Auto sense the media mode
*/
-static u8 dmfe_sense_speed(struct dmfe_board_info * db)
+static u8 dmfe_sense_speed(struct dmfe_board_info *db)
{
u8 ErrFlag = 0;
u16 phy_mode;
/* CR6 bit18=0, select 10/100M */
- update_cr6( (db->cr6_data & ~0x40000), db->ioaddr);
+ dmfe_update_cr6((db->cr6_data & ~0x40000), db->ioaddr);
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
- if ( (phy_mode & 0x24) == 0x24 ) {
+
+ if ((phy_mode & 0x24) == 0x24) {
+
if (db->chip_id == PCI_DM9132_ID) /* DM9132 */
phy_mode = phy_read(db->ioaddr,
db->phy_addr, 7, db->chip_id) & 0xf000;
else /* DM9102/DM9102A */
phy_mode = phy_read(db->ioaddr,
db->phy_addr, 17, db->chip_id) & 0xf000;
+
/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+
switch (phy_mode) {
- case 0x1000: db->op_mode = DMFE_10MHF; break;
- case 0x2000: db->op_mode = DMFE_10MFD; break;
- case 0x4000: db->op_mode = DMFE_100MHF; break;
- case 0x8000: db->op_mode = DMFE_100MFD; break;
- default: db->op_mode = DMFE_10MHF;
+ case 0x1000:
+ db->op_mode = DMFE_10MHF;
+ break;
+ case 0x2000:
+ db->op_mode = DMFE_10MFD;
+ break;
+ case 0x4000:
+ db->op_mode = DMFE_100MHF;
+ break;
+ case 0x8000:
+ db->op_mode = DMFE_100MFD;
+ break;
+ default:
+ db->op_mode = DMFE_10MHF;
ErrFlag = 1;
break;
}
+
} else {
db->op_mode = DMFE_10MHF;
+
DMFE_DBUG(0, "Link Failed :", phy_mode);
ErrFlag = 1;
}
@@ -1665,7 +1149,6 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
return ErrFlag;
}
-
/*
* Set 10/100 phyxcer capability
* AUTO mode : phyxcer register4 is NIC capability
@@ -1678,7 +1161,7 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
/* Select 10/100M phyxcer */
db->cr6_data &= ~0x40000;
- update_cr6(db->cr6_data, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
/* DM9009 Chip: Phyxcer reg18 bit12=0 */
if (db->chip_id == PCI_DM9009_ID) {
@@ -1696,27 +1179,38 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
/* AUTO Mode */
phy_reg |= db->PHY_reg4;
} else {
+
/* Force Mode */
- switch(db->media_mode) {
- case DMFE_10MHF: phy_reg |= 0x20; break;
- case DMFE_10MFD: phy_reg |= 0x40; break;
- case DMFE_100MHF: phy_reg |= 0x80; break;
- case DMFE_100MFD: phy_reg |= 0x100; break;
+ switch (db->media_mode) {
+ case DMFE_10MHF:
+ phy_reg |= 0x20;
+ break;
+ case DMFE_10MFD:
+ phy_reg |= 0x40;
+ break;
+ case DMFE_100MHF:
+ phy_reg |= 0x80;
+ break;
+ case DMFE_100MFD:
+ phy_reg |= 0x100;
+ break;
}
- if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61;
+
+ if (db->chip_id == PCI_DM9009_ID)
+ phy_reg &= 0x61;
}
- /* Write new capability to Phyxcer Reg4 */
- if ( !(phy_reg & 0x01e0)) {
- phy_reg|=db->PHY_reg4;
- db->media_mode|=DMFE_AUTO;
+ /* Write new capability to Phyxcer Reg4 */
+ if (!(phy_reg & 0x01e0)) {
+ phy_reg |= db->PHY_reg4;
+ db->media_mode |= DMFE_AUTO;
}
phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
- /* Restart Auto-Negotiation */
- if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+ /* Restart Auto-Negotiation */
+ if (db->chip_type && (db->chip_id == PCI_DM9102_ID))
phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
- if ( !db->chip_type )
+ if (!db->chip_type)
phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
}
@@ -1744,24 +1238,34 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
else
db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */
- update_cr6(db->cr6_data, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data, db->ioaddr);
/* 10/100M phyxcer force mode need */
- if ( !(db->media_mode & 0x18)) {
- /* Forece Mode */
+ if (!(db->media_mode & 0x18)) {
+ /* Force Mode */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
- if ( !(phy_reg & 0x1) ) {
+ if (!(phy_reg & 0x1)) {
/* parter without N-Way capability */
phy_reg = 0x0;
- switch(db->op_mode) {
- case DMFE_10MHF: phy_reg = 0x0; break;
- case DMFE_10MFD: phy_reg = 0x100; break;
- case DMFE_100MHF: phy_reg = 0x2000; break;
- case DMFE_100MFD: phy_reg = 0x2100; break;
+
+ switch (db->op_mode) {
+ case DMFE_10MHF:
+ phy_reg = 0x0;
+ break;
+ case DMFE_10MFD:
+ phy_reg = 0x100;
+ break;
+ case DMFE_100MHF:
+ phy_reg = 0x2000;
+ break;
+ case DMFE_100MFD:
+ phy_reg = 0x2100;
+ break;
}
+
phy_write(db->ioaddr,
db->phy_addr, 0, phy_reg, db->chip_id);
- if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+ if (db->chip_type && (db->chip_id == PCI_DM9102_ID))
mdelay(20);
phy_write(db->ioaddr,
db->phy_addr, 0, phy_reg, db->chip_id);
@@ -1814,7 +1318,7 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
phy_write_1bit(ioaddr, PHY_DATA_0);
/* Write a word data to PHY controller */
- for ( i = 0x8000; i > 0; i >>= 1)
+ for (i = 0x8000; i > 0; i >>= 1)
phy_write_1bit(ioaddr,
phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
}
@@ -1900,7 +1404,7 @@ static u16 phy_read_1bit(unsigned long ioaddr)
outl(0x50000, ioaddr);
udelay(1);
- phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+ phy_data = (inl(ioaddr) >> 19) & 0x1;
outl(0x40000, ioaddr);
udelay(1);
@@ -1909,12 +1413,52 @@ static u16 phy_read_1bit(unsigned long ioaddr)
/*
+ * Read one word data from the serial ROM
+ */
+
+static u16 dmfe_read_srom_word(long ioaddr, int offset)
+{
+ int i;
+ u16 srom_data = 0;
+ long cr9_ioaddr = ioaddr + DCR9;
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ /* Send the Read Command 110b */
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+ /* Send the offset */
+ for (i = 5; i >= 0; i--) {
+ srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+ SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ }
+
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ for (i = 16; i > 0; i--) {
+ outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ udelay(5);
+ srom_data = (srom_data << 1) |
+ ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ udelay(5);
+ }
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ return srom_data;
+}
+
+
+/*
* Parser SROM and media mode
*/
-static void dmfe_parse_srom(struct dmfe_board_info * db)
+static void dmfe_parse_srom(struct dmfe_board_info *db)
{
- char * srom = db->srom;
+ char *srom = db->srom;
int dmfe_mode, tmp_reg;
DMFE_DBUG(0, "dmfe_parse_srom() ", 0);
@@ -1923,42 +1467,63 @@ static void dmfe_parse_srom(struct dmfe_board_info * db)
db->cr15_data = CR15_DEFAULT;
/* Check SROM Version */
- if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) {
+ if (((int) srom[18] & 0xff) == SROM_V41_CODE) {
/* SROM V4.01 */
/* Get NIC support media mode */
db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34));
db->PHY_reg4 = 0;
+
for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) {
- switch( db->NIC_capability & tmp_reg ) {
- case 0x1: db->PHY_reg4 |= 0x0020; break;
- case 0x2: db->PHY_reg4 |= 0x0040; break;
- case 0x4: db->PHY_reg4 |= 0x0080; break;
- case 0x8: db->PHY_reg4 |= 0x0100; break;
+
+ switch (db->NIC_capability & tmp_reg) {
+ case 0x1:
+ db->PHY_reg4 |= 0x0020;
+ break;
+ case 0x2:
+ db->PHY_reg4 |= 0x0040;
+ break;
+ case 0x4:
+ db->PHY_reg4 |= 0x0080;
+ break;
+ case 0x8:
+ db->PHY_reg4 |= 0x0100;
+ break;
}
}
/* Media Mode Force or not check */
dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) &
le32_to_cpup((__le32 *) (srom + 36)));
- switch(dmfe_mode) {
- case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */
- case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */
- case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */
- case 0x100:
- case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */
+
+ switch (dmfe_mode) {
+
+ case 0x4: /* 100MHF */
+ dmfe_media_mode = DMFE_100MHF;
+ break;
+ case 0x2: /* 10MFD */
+ dmfe_media_mode = DMFE_10MFD;
+ break;
+ case 0x8: /* 100MFD */
+ dmfe_media_mode = DMFE_100MFD;
+ break;
+
+ case 0x100: /* HomePNA */
+ case 0x200:
+ dmfe_media_mode = DMFE_1M_HPNA;
+ break;
}
/* Special Function setting */
/* VLAN function */
- if ( (SF_mode & 0x1) || (srom[43] & 0x80) )
+ if ((SF_mode & 0x1) || (srom[43] & 0x80))
db->cr15_data |= 0x40;
/* Flow Control */
- if ( (SF_mode & 0x2) || (srom[40] & 0x1) )
+ if ((SF_mode & 0x2) || (srom[40] & 0x1))
db->cr15_data |= 0x400;
/* TX pause packet */
- if ( (SF_mode & 0x4) || (srom[40] & 0xe) )
+ if ((SF_mode & 0x4) || (srom[40] & 0xe))
db->cr15_data |= 0x9800;
}
@@ -1971,28 +1536,45 @@ static void dmfe_parse_srom(struct dmfe_board_info * db)
/* Issue remote command & operation mode */
if (HPNA_tx_cmd == 1)
- switch(HPNA_mode) { /* Issue Remote Command */
- case 0: db->HPNA_command |= 0x0904; break;
- case 1: db->HPNA_command |= 0x0a00; break;
- case 2: db->HPNA_command |= 0x0506; break;
- case 3: db->HPNA_command |= 0x0602; break;
+ switch (HPNA_mode) { /* Issue Remote Command */
+ case 0:
+ db->HPNA_command |= 0x0904;
+ break;
+ case 1:
+ db->HPNA_command |= 0x0a00;
+ break;
+ case 2:
+ db->HPNA_command |= 0x0506;
+ break;
+ case 3:
+ db->HPNA_command |= 0x0602;
+ break;
}
else
- switch(HPNA_mode) { /* Don't Issue */
- case 0: db->HPNA_command |= 0x0004; break;
- case 1: db->HPNA_command |= 0x0000; break;
- case 2: db->HPNA_command |= 0x0006; break;
- case 3: db->HPNA_command |= 0x0002; break;
+ switch (HPNA_mode) { /* Don't Issue */
+ case 0:
+ db->HPNA_command |= 0x0004;
+ break;
+ case 1:
+ db->HPNA_command |= 0x0000;
+ break;
+ case 2:
+ db->HPNA_command |= 0x0006;
+ break;
+ case 3:
+ db->HPNA_command |= 0x0002;
+ break;
}
/* Check DM9801 or DM9802 present or not */
db->HPNA_present = 0;
- update_cr6(db->cr6_data|0x40000, db->ioaddr);
+ dmfe_update_cr6(db->cr6_data|0x40000, db->ioaddr);
tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id);
- if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) {
+ if ((tmp_reg & 0xfff0) == 0xb900) {
/* DM9801 or DM9802 present */
db->HPNA_timer = 8;
- if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) {
+ if (phy_read(db->ioaddr, db->phy_addr, 31,
+ db->chip_id) == 0x4404) {
/* DM9801 HomeRun */
db->HPNA_present = 1;
dmfe_program_DM9801(db, tmp_reg);
@@ -2010,16 +1592,18 @@ static void dmfe_parse_srom(struct dmfe_board_info * db)
* Init HomeRun DM9801
*/
-static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev)
+static void dmfe_program_DM9801(struct dmfe_board_info *db, int HPNA_rev)
{
uint reg17, reg25;
- if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR;
- switch(HPNA_rev) {
+ if (!HPNA_NoiseFloor)
+ HPNA_NoiseFloor = DM9801_NOISE_FLOOR;
+
+ switch (HPNA_rev) {
case 0xb900: /* DM9801 E3 */
db->HPNA_command |= 0x1000;
reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id);
- reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000;
+ reg25 = ((reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000;
reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
break;
case 0xb901: /* DM9801 E4 */
@@ -2048,14 +1632,16 @@ static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev)
* Init HomeRun DM9802
*/
-static void dmfe_program_DM9802(struct dmfe_board_info * db)
+static void dmfe_program_DM9802(struct dmfe_board_info *db)
{
uint phy_reg;
- if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR;
+ if (!HPNA_NoiseFloor)
+ HPNA_NoiseFloor = DM9802_NOISE_FLOOR;
+
phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
- phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor;
+ phy_reg = (phy_reg & 0xff00) + HPNA_NoiseFloor;
phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id);
}
@@ -2065,38 +1651,283 @@ static void dmfe_program_DM9802(struct dmfe_board_info * db)
* issue command again.
*/
-static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
+static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info *db)
{
uint phy_reg;
/* Got remote device status */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60;
- switch(phy_reg) {
- case 0x00: phy_reg = 0x0a00;break; /* LP/LS */
- case 0x20: phy_reg = 0x0900;break; /* LP/HS */
- case 0x40: phy_reg = 0x0600;break; /* HP/LS */
- case 0x60: phy_reg = 0x0500;break; /* HP/HS */
+ switch (phy_reg) {
+
+ case 0x00: /* LP/LS */
+ phy_reg = 0x0a00;
+ break;
+ case 0x20: /* LP/HS */
+ phy_reg = 0x0900;
+ break;
+ case 0x40: /* HP/LS */
+ phy_reg = 0x0600;
+ break;
+ case 0x60: /* HP/HS */
+ phy_reg = 0x0500;
+ break;
}
/* Check remote device status match our setting ot not */
- if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
+ if (phy_reg != (db->HPNA_command & 0x0f00)) {
phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
db->chip_id);
- db->HPNA_timer=8;
+ db->HPNA_timer = 8;
} else
- db->HPNA_timer=600; /* Match, every 10 minutes, check */
+ db->HPNA_timer = 600; /* Match, every 10 minutes, check */
}
+/*
+ * Ethtool interace
+ */
-static struct pci_device_id dmfe_pci_tbl[] = {
- { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID },
- { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
- { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
- { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID },
- { 0, }
+static void dmfe_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct dmfe_board_info *np = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ if (np->pdev)
+ strcpy(info->bus_info, pci_name(np->pdev));
+ else
+ sprintf(info->bus_info, "EISA 0x%lx %d",
+ dev->base_addr, dev->irq);
+}
+
+static int dmfe_ethtool_set_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+ WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ db->wol_mode = wolinfo->wolopts;
+ return 0;
+}
+
+static void dmfe_ethtool_get_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = db->wol_mode;
+ return;
+}
+
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = dmfe_ethtool_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .set_wol = dmfe_ethtool_set_wol,
+ .get_wol = dmfe_ethtool_get_wol,
+};
+
+
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = dmfe_open,
+ .ndo_stop = dmfe_stop,
+ .ndo_start_xmit = dmfe_start_xmit,
+ .ndo_set_multicast_list = dmfe_set_filter_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = dmfe_poll,
+#endif
};
-MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);
+
+
+static int __devinit dmfe_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct dmfe_board_info *db; /* board information structure */
+ struct net_device *dev;
+ u32 pci_pmr;
+ int i, err;
+
+ DMFE_DBUG(0, "dmfe_probe()", 0);
+
+ if (!printed_version++)
+ printk(version);
+
+ /*
+ * SPARC on-board DM910x chips should be handled by the main
+ * tulip driver, except for early DM9100s.
+ */
+#ifdef CONFIG_TULIP_DM910X
+ if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) ||
+ ent->driver_data == PCI_DM9102_ID) {
+ struct device_node *dp = pci_device_to_OF_node(pdev);
+
+ if (dp && of_get_property(dp, "local-mac-address", NULL)) {
+ printk(KERN_INFO DRV_NAME
+ ": skipping on-board DM910x (use tulip)\n");
+ return -ENODEV;
+ }
+ }
+#endif
+
+ /* Init network device */
+ dev = alloc_etherdev(sizeof(*db));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ printk(KERN_WARNING DRV_NAME
+ ": 32-bit PCI DMA not available.\n");
+ err = -ENODEV;
+ goto err_out_free;
+ }
+
+ /* Enable Master/IO access, Disable memory access */
+ err = pci_enable_device(pdev);
+ if (err)
+ goto err_out_free;
+
+ if (!pci_resource_start(pdev, 0)) {
+ printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev))) {
+ printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */
+
+ /* Set Latency Timer 80h */
+ /* FIXME: setting values > 32 breaks some SiS 559x stuff.
+ Need a PCI quirk.. */
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
+#endif
+
+ if (pci_request_regions(pdev, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ /* Init system & device */
+ db = netdev_priv(dev);
+
+ /* Allocate Tx/Rx descriptor memory */
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+ if (!db->desc_pool_ptr)
+ goto err_out_res;
+
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
+ TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+ if (!db->buf_pool_ptr)
+ goto err_out_free_desc;
+
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+ db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+ db->buf_pool_start = db->buf_pool_ptr;
+ db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+ db->chip_id = ent->driver_data;
+ db->ioaddr = pci_resource_start(pdev, 0);
+ db->chip_revision = pdev->revision;
+ db->wol_mode = 0;
+
+ db->pdev = pdev;
+
+ dev->base_addr = db->ioaddr;
+ dev->irq = pdev->irq;
+ pci_set_drvdata(pdev, dev);
+ dev->netdev_ops = &netdev_ops;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ netif_carrier_off(dev);
+ spin_lock_init(&db->lock);
+
+ pci_read_config_dword(pdev, 0x50, &pci_pmr);
+ pci_pmr &= 0x70000;
+ if ((pci_pmr == 0x10000) && (db->chip_revision == 0x31))
+ db->chip_type = 1; /* DM9102A E3 */
+ else
+ db->chip_type = 0;
+
+ /* read 64 word srom data */
+ for (i = 0; i < 64; i++)
+ ((__le16 *) db->srom)[i] =
+ cpu_to_le16(dmfe_read_srom_word(db->ioaddr, i));
+
+ /* Set Node address */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = db->srom[20 + i];
+
+ err = register_netdev(dev);
+ if (err)
+ goto err_out_free_buf;
+
+ printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, %pM, irq %d.\n",
+ dev->name,
+ ent->driver_data >> 16,
+ pci_name(pdev),
+ dev->dev_addr,
+ dev->irq);
+
+ pci_set_master(pdev);
+
+ return 0;
+
+err_out_free_buf:
+ pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_free_desc:
+ pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+ db->desc_pool_ptr, db->desc_pool_dma_ptr);
+err_out_res:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_free:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+
+ return err;
+}
+
+static void __devexit dmfe_remove(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ DMFE_DBUG(0, "dmfe_remove_one()", 0);
+
+ if (dev) {
+
+ unregister_netdev(dev);
+
+ pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ db->desc_pool_dma_ptr);
+ pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+ pci_release_regions(pdev);
+ free_netdev(dev); /* free board information */
+
+ pci_set_drvdata(pdev, NULL);
+ }
+
+ DMFE_DBUG(0, "dmfe_remove_one() exit", 0);
+}
#ifdef CONFIG_PM
@@ -2111,11 +1942,11 @@ static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
/* Disable Tx/Rx */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);
- update_cr6(db->cr6_data, dev->base_addr);
+ dmfe_update_cr6(db->cr6_data, dev->base_addr);
/* Disable Interrupt */
outl(0, dev->base_addr + DCR7);
- outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5);
+ outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
/* Fre RX buffers */
dmfe_free_rxbuffer(db);
@@ -2136,7 +1967,7 @@ static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
/* Power down device*/
pci_save_state(pci_dev);
- pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state));
+ pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
return 0;
}
@@ -2150,7 +1981,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
pci_restore_state(pci_dev);
/* Re-initilize DM910X board */
- dmfe_init_dm910x(dev);
+ dmfe_hardware_init(dev);
/* Disable WOL */
pci_read_config_dword(pci_dev, 0x40, &tmp);
@@ -2166,44 +1997,33 @@ static int dmfe_resume(struct pci_dev *pci_dev)
return 0;
}
-#else
-#define dmfe_suspend NULL
-#define dmfe_resume NULL
#endif
+
+static struct pci_device_id dmfe_pci_tbl[] = {
+ { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID },
+ { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
+ { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
+ { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);
+
+
static struct pci_driver dmfe_driver = {
.name = "dmfe",
.id_table = dmfe_pci_tbl,
- .probe = dmfe_init_one,
- .remove = __devexit_p(dmfe_remove_one),
+ .probe = dmfe_probe,
+ .remove = __devexit_p(dmfe_remove),
+#ifdef CONFIG_PM
.suspend = dmfe_suspend,
.resume = dmfe_resume
+#endif
};
-MODULE_AUTHOR("Sten Wang, sten_wang@xxxxxxxxxxxxxx");
-MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-module_param(debug, int, 0);
-module_param(mode, byte, 0);
-module_param(cr6set, int, 0);
-module_param(chkmode, byte, 0);
-module_param(HPNA_mode, byte, 0);
-module_param(HPNA_rx_cmd, byte, 0);
-module_param(HPNA_tx_cmd, byte, 0);
-module_param(HPNA_NoiseFloor, byte, 0);
-module_param(SF_mode, byte, 0);
-MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
-MODULE_PARM_DESC(mode, "Davicom DM9xxx: "
- "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
-
-MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
- "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
-
-/* Description:
- * when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+/*
+ * Search DM910X board ,allocate space and register it
*/
static int __init dmfe_init_module(void)
@@ -2220,15 +2040,16 @@ static int __init dmfe_init_module(void)
if (cr6set)
dmfe_cr6_user_set = cr6set;
- switch(mode) {
- case DMFE_10MHF:
+ switch (mode) {
+ case DMFE_10MHF:
case DMFE_100MHF:
case DMFE_10MFD:
case DMFE_100MFD:
case DMFE_1M_HPNA:
dmfe_media_mode = mode;
break;
- default:dmfe_media_mode = DMFE_AUTO;
+ default:
+ dmfe_media_mode = DMFE_AUTO;
break;
}
@@ -2249,12 +2070,6 @@ static int __init dmfe_init_module(void)
}
-/*
- * Description:
- * when user used rmmod to delete module, system invoked clean_module()
- * to un-register all registered services.
- */
-
static void __exit dmfe_cleanup_module(void)
{
DMFE_DBUG(0, "dmfe_clean_module() ", debug);
@@ -2263,3 +2078,26 @@ static void __exit dmfe_cleanup_module(void)
module_init(dmfe_init_module);
module_exit(dmfe_cleanup_module);
+
+
+module_param(debug, int, 0);
+module_param(mode, byte, 0);
+module_param(cr6set, int, 0);
+module_param(chkmode, byte, 0);
+module_param(HPNA_mode, byte, 0);
+module_param(HPNA_rx_cmd, byte, 0);
+module_param(HPNA_tx_cmd, byte, 0);
+module_param(HPNA_NoiseFloor, byte, 0);
+module_param(SF_mode, byte, 0);
+MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "Davicom DM9xxx: "
+ "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
+ "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
+
+
+MODULE_AUTHOR("Sten Wang, sten_wang@xxxxxxxxxxxxxx");
+MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/net/tulip/dmfe.h b/drivers/net/tulip/dmfe.h
new file mode 100644
index 0000000..363e822
--- /dev/null
+++ b/drivers/net/tulip/dmfe.h
@@ -0,0 +1,305 @@
+/*
+ A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast
+ ethernet driver for Linux.
+ Copyright (C) 1997 Sten Wang
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ DAVICOM Web-Site: www.davicom.com.tw
+
+ Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@xxxxxxxxxxxxxx
+ Maintainer: Tobias Ringstrom <tori@xxxxxxxxxxxxxxx>
+
+ (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+ Marcelo Tosatti <marcelo@xxxxxxxxxxxxxxxx> :
+ Made it compile in 2.3 (device to net_device)
+
+ Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> :
+ Cleaned up for kernel merge.
+ Removed the back compatibility support
+ Reformatted, fixing spelling etc as I went
+ Removed IRQ 0-15 assumption
+
+ Jeff Garzik <jgarzik@xxxxxxxxx> :
+ Updated to use new PCI driver API.
+ Resource usage cleanups.
+ Report driver version to user.
+
+ Tobias Ringstrom <tori@xxxxxxxxxxxxxxx> :
+ Cleaned up and added SMP safety. Thanks go to Jeff Garzik,
+ Andrew Morton and Frank Davis for the SMP safety fixes.
+
+ Vojtech Pavlik <vojtech@xxxxxxx> :
+ Cleaned up pointer arithmetics.
+ Fixed a lot of 64bit issues.
+ Cleaned up printk()s a bit.
+ Fixed some obvious big endian problems.
+
+ Tobias Ringstrom <tori@xxxxxxxxxxxxxxx> :
+ Use time_after for jiffies calculation. Added ethtool
+ support. Updated PCI resource allocation. Do not
+ forget to unmap PCI mapped skbs.
+
+ Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
+ Added new PCI identifiers provided by Clear Zhang at ALi
+ for their 1563 ethernet device.
+
+ TODO
+
+ Check on 64 bit boxes.
+ Check and fix on big endian boxes.
+
+ Test and make sure PCI latency is now correct for all cases.
+*/
+#define DRV_NAME "dmfe"
+#define DRV_VERSION "1.36.4"
+#define DRV_RELDATE "2002-01-17"
+
+#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
+#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */
+#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */
+#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */
+
+#define DM9102_IO_SIZE 0x80
+#define DM9102A_IO_SIZE 0x100
+#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */
+#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
+#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC 0x600
+#define RX_ALLOC_SIZE 0x620
+#define DM910X_RESET 1
+#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */
+#define CR6_DEFAULT 0x00080000 /* HD */
+#define CR7_DEFAULT 0x180c1
+#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define DMFE_MAX_MULTICAST 14
+#define RX_COPY_SIZE 100
+#define MAX_CHECK_PACKET 0x8000
+#define DM9801_NOISE_FLOOR 8
+#define DM9802_NOISE_FLOOR 5
+
+#define DMFE_WOL_LINKCHANGE 0x20000000
+#define DMFE_WOL_SAMPLEPACKET 0x10000000
+#define DMFE_WOL_MAGICPACKET 0x08000000
+
+
+#define DMFE_10MHF 0
+#define DMFE_100MHF 1
+#define DMFE_10MFD 4
+#define DMFE_100MFD 5
+#define DMFE_AUTO 8
+#define DMFE_1M_HPNA 0x10
+
+#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */
+#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */
+#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */
+#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */
+#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */
+#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */
+
+#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
+#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
+
+#define DMFE_DBUG(dbug_now, msg, value) \
+ do { \
+ if (dmfe_debug || (dbug_now)) \
+ printk(KERN_ERR DRV_NAME ": %s %lx\n",\
+ (msg), (long) (value)); \
+ } while (0)
+
+#define SHOW_MEDIA_TYPE(mode) \
+ printk(KERN_INFO DRV_NAME " : Change Speed to %sMhz %s duplex\n" , \
+ (mode & 1) ? "100" : "10", (mode & 4) ? "full" : "half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ 0x4800
+#define CR9_SRCS 0x1
+#define CR9_SRCLK 0x2
+#define CR9_CRDOUT 0x8
+#define SROM_DATA_0 0x0
+#define SROM_DATA_1 0x4
+#define PHY_DATA_1 0x20000
+#define PHY_DATA_0 0x00000
+#define MDCLKH 0x10000
+
+#define PHY_POWER_DOWN 0x800
+
+#define SROM_V41_CODE 0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) \
+ do { \
+ outl(data|CR9_SROM_READ|CR9_SRCS , ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK , ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS , ioaddr); \
+ udelay(5); \
+ } while (0);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) \
+ ((((pci_id) == PCI_DM9132_ID) || ((dev_rev) >= 0x30)) ? \
+ DM9102A_IO_SIZE : DM9102_IO_SIZE)
+
+#define CHK_IO_SIZE(pci_dev) \
+ (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+ (pci_dev)->revision))
+
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+ __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+} __attribute__((aligned(32)));
+
+struct rx_desc {
+ __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ struct sk_buff *rx_skb_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+} __attribute__((aligned(32)));
+
+struct dmfe_board_info {
+ u32 chip_id; /* Chip vendor/Device ID */
+ u8 chip_revision; /* Chip revision */
+ struct net_device *next_dev; /* next device */
+ struct pci_dev *pdev; /* PCI device */
+ spinlock_t lock;
+
+ long ioaddr; /* I/O base address */
+ u32 cr0_data;
+ u32 cr5_data;
+ u32 cr6_data;
+ u32 cr7_data;
+ u32 cr15_data;
+
+ /* pointer for memory physical address */
+ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
+ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
+ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
+ dma_addr_t first_tx_desc_dma;
+ dma_addr_t first_rx_desc_dma;
+
+ /* descriptor pointer */
+ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
+ unsigned char *buf_pool_start; /* Tx buffer pool align dword */
+ unsigned char *desc_pool_ptr; /* descriptor pool memory */
+ struct tx_desc *first_tx_desc;
+ struct tx_desc *tx_insert_ptr;
+ struct tx_desc *tx_remove_ptr;
+ struct rx_desc *first_rx_desc;
+ struct rx_desc *rx_insert_ptr;
+ struct rx_desc *rx_ready_ptr; /* packet come pointer */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+ unsigned long tx_queue_cnt; /* wait to send packet count */
+ unsigned long rx_avail_cnt; /* available rx descriptor count */
+ unsigned long interval_rx_cnt; /* rx packet count a callback time */
+
+ u16 HPNA_command; /* For HPNA register 16 */
+ u16 HPNA_timer; /* For HPNA remote device check */
+ u16 dbug_cnt;
+ u16 NIC_capability; /* NIC media capability */
+ u16 PHY_reg4; /* Saved Phyxcer register 4 value */
+
+ u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */
+ u8 chip_type; /* Keep DM9102A chip type */
+ u8 media_mode; /* user specify media mode */
+ u8 op_mode; /* real work media mode */
+ u8 phy_addr;
+ u8 wait_reset; /* Hardware failed, need to reset */
+ u8 dm910x_chk_mode; /* Operating mode check */
+ u8 first_in_callback; /* Flag to record state */
+ u8 wol_mode; /* user WOL settings */
+ struct timer_list timer;
+
+ /* Driver defined statistic counter */
+ unsigned long tx_fifo_underrun;
+ unsigned long tx_loss_carrier;
+ unsigned long tx_no_carrier;
+ unsigned long tx_late_collision;
+ unsigned long tx_excessive_collision;
+ unsigned long tx_jabber_timeout;
+ unsigned long reset_count;
+ unsigned long reset_cr8;
+ unsigned long reset_fatal;
+ unsigned long reset_TXtimeout;
+
+ /* NIC SROM data */
+ unsigned char srom[128];
+};
+
+enum dmfe_offsets {
+ DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+ DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+ DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+ DCR15 = 0x78
+};
+
+enum dmfe_CR6_bits {
+ CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+ CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+ CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+static int dmfe_open(struct net_device *);
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct net_device *);
+static int dmfe_stop(struct net_device *);
+static void dmfe_set_filter_mode(struct net_device *);
+static const struct ethtool_ops netdev_ethtool_ops;
+static u16 dmfe_read_srom_word(long , int);
+static irqreturn_t dmfe_interrupt(int , void *);
+static void dmfe_poll(struct net_device *dev);
+static void dmfe_descriptor_init(struct dmfe_board_info *);
+static void dmfe_allocate_rx_buffer(struct dmfe_board_info *);
+static void dmfe_update_cr6(u32, unsigned long);
+static void dmfe_send_filter_frame(struct net_device* , int);
+static void dm9132_id_table(struct net_device * , int);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_write_1bit(unsigned long, u32);
+static u16 phy_read_1bit(unsigned long);
+static u8 dmfe_sense_speed(struct dmfe_board_info *);
+static void dmfe_process_mode(struct dmfe_board_info *);
+static void dmfe_timer(unsigned long);
+static void dmfe_rx_packet(struct net_device *, struct dmfe_board_info *);
+static void dmfe_free_tx_pkt(struct net_device *, struct dmfe_board_info *);
+static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *);
+static void dmfe_dynamic_reset(struct net_device *);
+static void dmfe_free_rxbuffer(struct dmfe_board_info *);
+static void dmfe_hardware_init(struct net_device *);
+static void dmfe_parse_srom(struct dmfe_board_info *);
+static void dmfe_program_DM9801(struct dmfe_board_info *, int);
+static void dmfe_program_DM9802(struct dmfe_board_info *);
+static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info *);
+static void dmfe_set_phyxcer(struct dmfe_board_info *);
+
+/*
+ * Calculate the CRC valude of the Rx packet
+ * flag = 1 : return the reverse CRC (for the received packet CRC)
+ * 0 : return the normal CRC (for Hash Table index)
+ */
+
+static inline u32 cal_CRC(unsigned char *Data, unsigned int Len, u8 flag)
+{
+ u32 crc = crc32(~0, Data, Len);
+
+ if (flag)
+ crc = ~crc;
+
+ return crc;
+}
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/