S2R resume crash in 2.6.33-rc7 - NULL pointer dereference indev_get_drvdata() for usbhid

From: Bruno PrÃmont
Date: Mon Feb 08 2010 - 12:01:58 EST

Next message: Thomas Gleixner: "Re: [PATCH] Update comment on find_task_by_pid_ns"
Previous message: Mel Gorman: "Re: Performance regression in scsi sequential throughput (iozone)due to "e084b - page-allocator: preserve PFN ordering when__GFP_COLD is set""
Next in thread: Bruno PrÃmont: "Re: S2R resume crash in 2.6.33-rc7 - NULL pointer dereference indev_get_drvdata() for usbhid"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

2.6.33-rc7 (don't know if any previous version resumes properly)
crashes during resume from S2Ram when my USB keyboard is connected but
resumes properly (viafb corruption put apart) when the USB keyboard is
not connected.

Keyboard detection:
[ 3.070054] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3.220179] kbd_mode used greatest stack depth: 2228 bytes left
[ 3.276403] usb 2-2: New USB device found, idVendor=058f, idProduct=9462
[ 3.276514] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.276619] usb 2-2: Product: Multimedia USB Keyboard
[ 3.276711] usb 2-2: Manufacturer: Multimedia USB Keyboard
[ 3.278056] loadkeys used greatest stack depth: 1904 bytes left
[ 3.278791] init-early.sh used greatest stack depth: 1700 bytes left
[ 3.282561] hub 2-2:1.0: USB hub found
[ 3.286387] hub 2-2:1.0: 3 ports detected
[ 3.571454] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
[ 3.761474] usb 2-2.1: New USB device found, idVendor=058f, idProduct=9462
[ 3.761584] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.761719] usb 2-2.1: Product: Multimedia USB Keyboard
[ 3.762518] usb 2-2.1: Manufacturer: Multimedia USB Keyboard
[ 3.762612] usb 2-2.1: SerialNumber: Multimedia USB Keyboard
[ 3.789221] input: Multimedia USB Keyboard Multimedia USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2
-2/2-2.1/2-2.1:1.0/input/input4
[ 3.789585] generic-usb 0003:058F:9462.0001: input: USB HID v1.10 Keyboard [Multimedia USB Keyboard Multimedi
a USB Keyboard] on usb-0000:00:10.0-2.1/input0
[ 3.818001] generic-usb: probe of 0003:058F:9462.0002 failed with error -22

Resume crash:
[ 48.130061] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 48.591086] usb 2-2.1: reset full speed USB device using uhci_hcd and address 3
[ 48.741106] BUG: unable to handle kernel NULL pointer dereference at 00000020
[ 48.741558] IP: [<c11eabb0>] dev_get_drvdata+0x10/0x20
[ 48.741902] *pde = 00000000
[ 48.742083] Oops: 0000 [#1]
[ 48.742269] last sysfs file: /sys/power/state
[ 48.742528] Modules linked in: e_powersaver via_cputemp snd_hda_codec_via snd_hda_intel snd_hda_codec snd_pcm snd_timer via_agp snd soundcore viafb snd_page_alloc i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect sg agpgart
[ 48.743939]
[ 48.744040] Pid: 1512, comm: bash Not tainted 2.6.33-rc7-venus #1 CX700+W697HG/CX700+W697HG
[ 48.744528] EIP: 0060:[<c11eabb0>] EFLAGS: 00010202 CPU: 0
[ 48.744859] EIP is at dev_get_drvdata+0x10/0x20
[ 48.745121] EAX: 0000001c EBX: f6814000 ECX: 00000000 EDX: 00000000
[ 48.745493] ESI: f68bd064 EDI: f6814000 EBP: f6539dbc ESP: f6539dbc
[ 48.745861] DS: 0068 ES: 007b FS: 0000 GS: 0033 SS: 0068
[ 48.746178] Process bash (pid: 1512, ti=f6539000 task=f73686e0 task.ti=f6539000)
[ 48.746595] Stack:
[ 48.746716] f6539dcc c12823fe f68bd064 f682fe00 f6539e00 c1282558 00000021 00000000
[ 48.747391] <0> 00000001 00000000 00000000 00001388 f68bd000 f692a000 f682fe00 00000001
[ 48.747975] <0> f682fe00 f6539e0c c12825a8 c149d690 f6539e34 c122e65a c1498654 f68bd000
[ 48.751052] Call Trace:
[ 48.751052] [<c12823fe>] ? usbhid_restart_queues+0x3e/0x100
[ 48.751052] [<c1282558>] ? hid_post_reset+0x98/0xc0
[ 48.751052] [<c12825a8>] ? hid_reset_resume+0x28/0x30
[ 48.751052] [<c122e65a>] ? usb_resume_interface+0x9a/0x190
[ 48.751052] [<c123641f>] ? generic_resume+0xf/0x30
[ 48.751052] [<c122eb0f>] ? usb_resume_both+0x8f/0x130
[ 48.751052] [<c122f7fb>] ? usb_external_resume_device+0x2b/0x70
[ 48.751052] [<c122f85d>] ? usb_resume+0x1d/0x30
[ 48.751052] [<c12240ed>] ? usb_dev_resume+0xd/0x10
[ 48.751052] [<c11ee1b4>] ? pm_op+0x94/0xb0
[ 48.751052] [<c11711d0>] ? kobject_put+0x20/0x50
[ 48.751052] [<c11ee9f9>] ? dpm_resume_end+0xe9/0x330
[ 48.751052] [<c105131a>] ? resume_device_irqs+0x2a/0x60
[ 48.751052] [<c104d0ff>] ? suspend_devices_and_enter+0x7f/0x1a0
[ 48.751052] [<c132e0dd>] ? printk+0x18/0x1b
[ 48.751052] [<c104d320>] ? enter_state+0x100/0x120
[ 48.751052] [<c104cae0>] ? state_store+0x80/0xb0
[ 48.751052] [<c104ca60>] ? state_store+0x0/0xb0
[ 48.751052] [<c11710a4>] ? kobj_attr_store+0x24/0x30
[ 48.751052] [<c10c27bd>] ? sysfs_write_file+0x9d/0xf0
[ 48.751052] [<c10810cc>] ? vfs_write+0x9c/0x160
[ 48.751052] [<c10c2720>] ? sysfs_write_file+0x0/0xf0
[ 48.751052] [<c108124d>] ? sys_write+0x3d/0x70
[ 48.751052] [<c1002bd0>] ? sysenter_do_call+0x12/0x26
[ 48.751052] Code: 55 89 e5 5d 83 f8 01 19 c0 f7 d0 83 e0 f0 c3 8d b6 00 00 00 00 8d bf 00 00 00 00 55 85 c0 89 e5 75 09 31 c0 5d c3 90 8d 74 26 00 <8b> 40 04 85 c0 74 f0 8b 40 40 5d c3 8d 74 26 00 55 89 e5 83 ec
[ 48.751052] EIP: [<c11eabb0>] dev_get_drvdata+0x10/0x20 SS:ESP 0068:f6539dbc
[ 48.751052] CR2: 0000000000000020
[ 49.281981] ---[ end trace 1f0c734925556462 ]---

Could the crash be related to the generic-usb probe error?

lsusb -v for the keyboard:
Bus 002 Device 003: ID 058f:9462 Alcor Micro Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9462
bcdDevice 4.10
iManufacturer 1 Multimedia USB Keyboard
iProduct 2 Multimedia USB Keyboard
iSerial 3 Multimedia USB Keyboard
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 106
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 255
Device Status: 0x0000
(Bus Powered)

Bus 002 Device 002: ID 058f:9462 Alcor Micro Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9462
bcdDevice 1.58
iManufacturer 1 Multimedia USB Keyboard
iProduct 2 Multimedia USB Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x000d
Per-port power switching
Compound device
Per-port overcurrent protection
bPwrOn2PwrGood 22 * 2 milli seconds
bHubContrCurrent 50 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0000
(Bus Powered)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Thomas Gleixner: "Re: [PATCH] Update comment on find_task_by_pid_ns"
Previous message: Mel Gorman: "Re: Performance regression in scsi sequential throughput (iozone)due to "e084b - page-allocator: preserve PFN ordering when__GFP_COLD is set""
Next in thread: Bruno PrÃmont: "Re: S2R resume crash in 2.6.33-rc7 - NULL pointer dereference indev_get_drvdata() for usbhid"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]