[PATCH 07/14] dell-laptop: Block software state changes when rfkill hard blocked

[Matthew Garrett]

From: Mario Limonciello <Mario_Limonciello@xxxxxxxx>

The "hardware" switch is tied directly to a BIOS interface that will
connect and disconnect the hardware from the bus.

If you use the software interface to request the BIOS to make these
changes, the HW switch will be in an inconsistent state and LEDs may not
reflect the state of the HW.

Signed-off-by: Mario Limonciello <Mario_Limonciello@xxxxxxxx>
---
 drivers/platform/x86/dell-laptop.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index b13eb6a..81213e8 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -190,6 +190,10 @@ static int dell_rfkill_set(void *data, bool blocked)
 	unsigned long radio = (unsigned long)data;
 
 	memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+	dell_send_request(&buffer, 17, 11);
+	if (!(buffer.output[1] & BIT(16)))
+		return -EINVAL;
+
 	buffer.input[0] = (1 | (radio<<8) | (disable << 16));
 	dell_send_request(&buffer, 17, 11);
 
-- 
1.6.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/