Re: Gianfar driver failing on MPC8641D based board

From: Paul Gortmaker
Date: Fri Feb 26 2010 - 17:13:04 EST


On 10-02-26 04:38 PM, Anton Vorontsov wrote:

> OK, I think I found what's happening in gianfar.
>
> Some background...
>
> start_xmit() prepares new skb for transmitting, generally it does
> three things:
>
> 1. sets up all BDs (marks them ready to send), except the first one.
> 2. stores skb into tx_queue->tx_skbuff so that clean_tx_ring()
> would cleanup it later.
> 3. sets up the first BD, i.e. marks it ready.
>
> Here is what clean_tx_ring() does:
>
> 1. reads skbs from tx_queue->tx_skbuff
> 2. Checks if the *last* BD is ready. If it's still ready [to send]
> then it it isn't transmitted, so clean_tx_ring() returns.
> Otherwise it actually cleanups BDs. All is OK.
>
> Now, if there is just one BD, code flow:
>
> - start_xmit(): stores skb into tx_skbuff. Note that the first BD
> (which is also the last one) isn't marked as ready, yet.
> - clean_tx_ring(): sees that skb is not null, *and* its lstatus
> says that it is NOT ready (like if BD was sent), so it cleans
> it up (bad!)
> - start_xmit(): marks BD as ready [to send], but it's too late.
>
> We can fix this simply by reordering lstatus/tx_skbuff writes.
>
> It works flawlessly on my p2020, please try it.

I've skipped right to the test part (I'll think about the description
more later) and it passed 5 out of 5 boot tests on NFSroot sbc8641d.
Looks like you've got a solution.

Paul.

>
> Thanks!
>
>
> diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
> index 8bd3c9f..cccb409 100644
> --- a/drivers/net/gianfar.c
> +++ b/drivers/net/gianfar.c
> @@ -2021,7 +2021,6 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
> }
>
> /* setup the TxBD length and buffer pointer for the first BD */
> - tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
> txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
> skb_headlen(skb), DMA_TO_DEVICE);
>
> @@ -2053,6 +2052,10 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
>
> txbdp_start->lstatus = lstatus;
>
> + eieio(); /* force lstatus write before tx_skbuff */
> +
> + tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
> +
> /* Update the current skb pointer to the next entry we will use
> * (wrapping if necessary) */
> tx_queue->skb_curtx = (tx_queue->skb_curtx + 1)&

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/