Re: [2.6.34-rc1] Problem using USB 1.1 device on USB 3.0 xhci host controller

From: Sander Eikelenboom
Date: Sat Mar 13 2010 - 06:48:43 EST


The patches applied cleanly, but the device doesn't work yet.
complete dmesg and lsusb -vvv attached.

Highlights from dmesg:

[ 1.738043] usb 9-3: skipped 4 descriptors after interface
[ 1.738045] usb 9-3: skipped 2 descriptors after interface
[ 1.738048] usb 9-3: skipped 1 descriptor after endpoint
[ 1.738050] usb 9-3: skipped 2 descriptors after interface
[ 1.738053] usb 9-3: skipped 1 descriptor after endpoint
[ 1.738055] usb 9-3: skipped 2 descriptors after interface
[ 1.738057] usb 9-3: skipped 1 descriptor after endpoint
[ 1.738059] usb 9-3: skipped 2 descriptors after interface
[ 1.738061] usb 9-3: skipped 1 descriptor after endpoint
[ 1.741021] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 1.742039] usb 9-3: default language 0x0409
[ 1.765016] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 1.766036] usb 9-3: udev 2, busnum 9, minor = 1025
[ 1.766038] usb 9-3: New USB device found, idVendor=0471, idProduct=0311
[ 1.766244] usb 9-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.766448] usb 9-3: SerialNumber: 01680000EA164101
[ 1.766811] usb 9-3: usb_probe_device
[ 1.766813] usb 9-3: configuration #1 chosen from 1 choice
[ 1.767184] usb 9-3: Successful Endpoint Configure command
[ 1.769035] usb 9-3: adding 9-3:1.0 (config #1, interface 0)
[ 1.769151] usb 9-3: adding 9-3:1.1 (config #1, interface 1)
[ 1.769235] usb 9-3: adding 9-3:1.2 (config #1, interface 2)

[ 4.483174] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.
[ 4.515833] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 4.516894] pwc: Registered as video0.
[ 4.518834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 4.520834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 4.521051] Philips webcam 9-3:1.1: usb_probe_interface
[ 4.521053] Philips webcam 9-3:1.1: usb_probe_interface - got id
[ 4.521058] Philips webcam 9-3:1.2: usb_probe_interface
[ 4.521060] Philips webcam 9-3:1.2: usb_probe_interface - got id
[ 4.521073] usbcore: registered new interface driver Philips webcam


And when trying to actually grab pictures from the device:

[ 12.957593] usb 9-3: Successful Endpoint Configure command
[ 12.967542] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7ac74000, num_trbs = 10
[ 12.967553] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af8c000, num_trbs = 10
[ 12.985500] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 20.946116] eth1: no IPv6 routers present
[ 40.029279] usb 9-3: Successful Endpoint Configure command
[ 40.039186] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a814000, num_trbs = 10
[ 40.039198] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b734000, num_trbs = 10
[ 40.057195] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 40.216270] usb 9-3: Successful Endpoint Configure command
[ 40.226183] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a9c0000, num_trbs = 10
[ 40.226193] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a98c000, num_trbs = 10
[ 40.245183] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 40.399261] usb 9-3: Successful Endpoint Configure command
[ 40.408210] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a9c0000, num_trbs = 10
[ 40.408220] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a98c000, num_trbs = 10
[ 47.145805] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 48.076894] usb 9-3: Successful Endpoint Configure command
[ 48.086805] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b180000, num_trbs = 10
[ 48.086816] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b47c000, num_trbs = 10
[ 48.105803] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 48.263885] usb 9-3: Successful Endpoint Configure command
[ 48.273796] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7bba0000, num_trbs = 10
[ 48.273807] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af6c000, num_trbs = 10
[ 48.292793] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 48.446875] usb 9-3: Successful Endpoint Configure command
[ 48.456784] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7bba0000, num_trbs = 10
[ 48.456794] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af6c000, num_trbs = 10
[ 51.778648] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?




Saturday, March 13, 2010, 12:25:38 AM, you wrote:

> On Fri, Mar 12, 2010 at 05:43:45PM +0100, Sander Eikelenboom wrote:
>> Hi Sarah,
>>
>> I'm trying to use an USB 1.1 device on a USB 3.0 host controller, but it doesn't seem to work (tested with kernel versions up to 2.6.34-rc1):
>> - with lsusb I can only see a usb 3.0 root hub (with a USB 2.0 host controller, i'am always seeing the roothubs for lower speeds as well, so maybe this is the problem ?)
>> - with lsusb I can see the usb 1.1 device connected to the USB 3.0 root hub.
>> - the driver from the usb 1.1 device get loaded, but it gives errors, and (it's a webcam) doesn't give video.
>> - the manufacturer claims it should be backwards compatible hardware.
>>
>> - Should this work with the current (expirimental) state of the xhci-hcd driver in linux ?
>>
>> The hardware is (asus U3S6):
>> 03:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03) (prog-if 30)
>> Subsystem: ASUSTeK Computer Inc. Device [1043:8413]

> From the log files, it looks like your usb 1.1 device is a webcam; is
> that correct?

>> [ 5.097306] pwc: Philips webcam module version 10.0.13 loaded.
>> [ 5.097507] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>> [ 5.097859] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>> [ 5.098215] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>> [ 5.098557] pwc: Trace options: 0x0001
>> [ 5.098576] Philips webcam 9-3:1.0: usb_probe_interface
>> [ 5.098578] Philips webcam 9-3:1.0: usb_probe_interface - got id
> ...
>> [ 13.116489] pwc: isoc_init() submit_urb 0 failed with error -22

> Webcams have isochronous endpoints, and the xHCI driver doesn't support
> isochronous transfers yet. There are patches to add isochronous
> support, but they're still under going review. They missed the 2.6.34
> merge window, so I'm not sure if they'll make it into 2.6.34 or 2.6.35.
> If you want to try them out, the latest versions of the patches are
> here:

> http://marc.info/?l=linux-usb&m=126838645617885&w=2
> http://marc.info/?l=linux-usb&m=126838648717923&w=2
> http://marc.info/?l=linux-usb&m=126838649217932&w=2

> Let me know if they work for you.

> Sarah Sharp

>> Bus 009 Device 002: ID 0471:0311 Philips PCVC740K ToUcam Pro [pwc]
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.10
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 8
>> idVendor 0x0471 Philips
>> idProduct 0x0311 PCVC740K ToUcam Pro [pwc]
>> bcdDevice 0.03
>> iManufacturer 0
>> iProduct 0
>> iSerial 1 01680000EA164101
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 490
>> bNumInterfaces 3
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xa0
>> (Bus Powered)
>> Remote Wakeup
>> MaxPower 500mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0000 1x 0 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 1
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x00c4 1x 196 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 2
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0124 1x 292 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 3
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x01c0 1x 448 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 4
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0250 1x 592 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 5
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x02c0 1x 704 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 6
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0308 1x 776 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 7
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0348 1x 840 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 8
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0380 1x 896 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 9
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x03c0 1x 960 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 10
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0001 1x 1 bytes
>> bInterval 32
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x03c0 1x 960 bytes
>> bInterval 1
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 1
>> bAlternateSetting 0
>> bNumEndpoints 0
>> bInterfaceClass 1 Audio
>> bInterfaceSubClass 1 Control Device
>> bInterfaceProtocol 0
>> iInterface 0
>> AudioControl Interface Descriptor:
>> bLength 9
>> bDescriptorType 36
>> bDescriptorSubtype 1 (HEADER)
>> bcdADC 1.00
>> wTotalLength 38
>> bInCollection 1
>> baInterfaceNr( 0) 2
>> AudioControl Interface Descriptor:
>> bLength 12
>> bDescriptorType 36
>> bDescriptorSubtype 2 (INPUT_TERMINAL)
>> bTerminalID 1
>> wTerminalType 0x0201 Microphone
>> bAssocTerminal 0
>> bNrChannels 1
>> wChannelConfig 0x0000
>> iChannelNames 0
>> iTerminal 0
>> AudioControl Interface Descriptor:
>> bLength 8
>> bDescriptorType 36
>> bDescriptorSubtype 6 (FEATURE_UNIT)
>> bUnitID 2
>> bSourceID 1
>> bControlSize 1
>> bmaControls( 0) 0x03
>> Mute
>> Volume
>> iFeature 0
>> AudioControl Interface Descriptor:
>> bLength 9
>> bDescriptorType 36
>> bDescriptorSubtype 3 (OUTPUT_TERMINAL)
>> bTerminalID 3
>> wTerminalType 0x0101 USB Streaming
>> bAssocTerminal 0
>> bSourceID 2
>> iTerminal 0
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 2
>> bAlternateSetting 0
>> bNumEndpoints 0
>> bInterfaceClass 1 Audio
>> bInterfaceSubClass 2 Streaming
>> bInterfaceProtocol 0
>> iInterface 0
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 2
>> bAlternateSetting 1
>> bNumEndpoints 1
>> bInterfaceClass 1 Audio
>> bInterfaceSubClass 2 Streaming
>> bInterfaceProtocol 0
>> iInterface 0
>> AudioStreaming Interface Descriptor:
>> bLength 7
>> bDescriptorType 36
>> bDescriptorSubtype 1 (AS_GENERAL)
>> bTerminalLink 3
>> bDelay 1 frames
>> wFormatTag 1 PCM
>> AudioStreaming Interface Descriptor:
>> bLength 11
>> bDescriptorType 36
>> bDescriptorSubtype 2 (FORMAT_TYPE)
>> bFormatType 1 (FORMAT_TYPE_I)
>> bNrChannels 1
>> bSubframeSize 2
>> bBitResolution 16
>> bSamFreqType 1 Discrete
>> tSamFreq[ 0] 44100
>> Endpoint Descriptor:
>> bLength 9
>> bDescriptorType 5
>> bEndpointAddress 0x84 EP 4 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x005a 1x 90 bytes
>> bInterval 1
>> bRefresh 0
>> bSynchAddress 0
>> AudioControl Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 37
>> bDescriptorSubtype 1 (EP_GENERAL)
>> bmAttributes 0x00
>> bLockDelayUnits 0 Undefined
>> wLockDelay 0 Undefined
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 2
>> bAlternateSetting 2
>> bNumEndpoints 1
>> bInterfaceClass 1 Audio
>> bInterfaceSubClass 2 Streaming
>> bInterfaceProtocol 0
>> iInterface 0
>> AudioStreaming Interface Descriptor:
>> bLength 7
>> bDescriptorType 36
>> bDescriptorSubtype 1 (AS_GENERAL)
>> bTerminalLink 3
>> bDelay 1 frames
>> wFormatTag 1 PCM
>> AudioStreaming Interface Descriptor:
>> bLength 11
>> bDescriptorType 36
>> bDescriptorSubtype 2 (FORMAT_TYPE)
>> bFormatType 1 (FORMAT_TYPE_I)
>> bNrChannels 1
>> bSubframeSize 2
>> bBitResolution 16
>> bSamFreqType 1 Discrete
>> tSamFreq[ 0] 22050
>> Endpoint Descriptor:
>> bLength 9
>> bDescriptorType 5
>> bEndpointAddress 0x84 EP 4 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x002e 1x 46 bytes
>> bInterval 1
>> bRefresh 0
>> bSynchAddress 0
>> AudioControl Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 37
>> bDescriptorSubtype 1 (EP_GENERAL)
>> bmAttributes 0x00
>> bLockDelayUnits 0 Undefined
>> wLockDelay 0 Undefined
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 2
>> bAlternateSetting 3
>> bNumEndpoints 1
>> bInterfaceClass 1 Audio
>> bInterfaceSubClass 2 Streaming
>> bInterfaceProtocol 0
>> iInterface 0
>> AudioStreaming Interface Descriptor:
>> bLength 7
>> bDescriptorType 36
>> bDescriptorSubtype 1 (AS_GENERAL)
>> bTerminalLink 3
>> bDelay 1 frames
>> wFormatTag 1 PCM
>> AudioStreaming Interface Descriptor:
>> bLength 11
>> bDescriptorType 36
>> bDescriptorSubtype 2 (FORMAT_TYPE)
>> bFormatType 1 (FORMAT_TYPE_I)
>> bNrChannels 1
>> bSubframeSize 2
>> bBitResolution 16
>> bSamFreqType 1 Discrete
>> tSamFreq[ 0] 11025
>> Endpoint Descriptor:
>> bLength 9
>> bDescriptorType 5
>> bEndpointAddress 0x84 EP 4 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0019 1x 25 bytes
>> bInterval 1
>> bRefresh 0
>> bSynchAddress 0
>> AudioControl Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 37
>> bDescriptorSubtype 1 (EP_GENERAL)
>> bmAttributes 0x00
>> bLockDelayUnits 0 Undefined
>> wLockDelay 0 Undefined
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 2
>> bAlternateSetting 4
>> bNumEndpoints 1
>> bInterfaceClass 1 Audio
>> bInterfaceSubClass 2 Streaming
>> bInterfaceProtocol 0
>> iInterface 0
>> AudioStreaming Interface Descriptor:
>> bLength 7
>> bDescriptorType 36
>> bDescriptorSubtype 1 (AS_GENERAL)
>> bTerminalLink 3
>> bDelay 1 frames
>> wFormatTag 1 PCM
>> AudioStreaming Interface Descriptor:
>> bLength 11
>> bDescriptorType 36
>> bDescriptorSubtype 2 (FORMAT_TYPE)
>> bFormatType 1 (FORMAT_TYPE_I)
>> bNrChannels 1
>> bSubframeSize 2
>> bBitResolution 16
>> bSamFreqType 1 Discrete
>> tSamFreq[ 0] 8000
>> Endpoint Descriptor:
>> bLength 9
>> bDescriptorType 5
>> bEndpointAddress 0x84 EP 4 IN
>> bmAttributes 1
>> Transfer Type Isochronous
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0010 1x 16 bytes
>> bInterval 1
>> bRefresh 0
>> bSynchAddress 0
>> AudioControl Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 37
>> bDescriptorSubtype 1 (EP_GENERAL)
>> bmAttributes 0x00
>> bLockDelayUnits 0 Undefined
>> wLockDelay 0 Undefined
>> Device Status: 0x0002
>> (Bus Powered)
>> Remote Wakeup Enabled
>>
>> Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 3.00
>> bDeviceClass 9 Hub
>> bDeviceSubClass 0 Unused
>> bDeviceProtocol 3
>> bMaxPacketSize0 9
>> idVendor 0x1d6b Linux Foundation
>> idProduct 0x0003 3.0 root hub
>> bcdDevice 2.06
>> iManufacturer 3 Linux 2.6.34-rc1 xhci_hcd
>> iProduct 2 xHCI Host Controller
>> iSerial 1 0000:03:00.0
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 25
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 0mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 9 Hub
>> bInterfaceSubClass 0 Unused
>> bInterfaceProtocol 0 Full speed (or root) hub
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0004 1x 4 bytes
>> bInterval 12
>> Hub Descriptor:
>> bLength 9
>> bDescriptorType 41
>> nNbrPorts 4
>> wHubCharacteristic 0x0009
>> Per-port power switching
>> Per-port overcurrent protection
>> TT think time 8 FS bits
>> bPwrOn2PwrGood 10 * 2 milli seconds
>> bHubContrCurrent 0 milli Ampere
>> DeviceRemovable 0x00
>> PortPwrCtrlMask 0xff
>> Hub Port Status:
>> Port 1: 0000.0100 power
>> Port 2: 0000.0100 power
>> Port 3: 0000.0103 power enable connect
>> Port 4: 0000.0100 power
>> Device Status: 0x0003
>> Self Powered
>> Remote Wakeup Enabled




--
Best regards,
Sander mailto:linux@xxxxxxxxxxxxxx[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34-rc1 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Sat Mar 13 03:51:02 CET 2010
[ 0.000000] Command line: root=/dev/sda1 ro console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007cb70000 (usable)
[ 0.000000] BIOS-e820: 000000007cb70000 - 000000007cb7e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007cb7e000 - 000000007cbd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007cbd0000 - 000000007cc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7cb70 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07CC00000 mask FFFC00000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007cb70000 (usable)
[ 0.000000] modified: 000000007cb70000 - 000000007cb7e000 (ACPI data)
[ 0.000000] modified: 000000007cb7e000 - 000000007cbd0000 (ACPI NVS)
[ 0.000000] modified: 000000007cbd0000 - 000000007cc00000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] modified: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-000000007cb70000
[ 0.000000] 0000000000 - 007ca00000 page 2M
[ 0.000000] 007ca00000 - 007cb70000 page 4k
[ 0.000000] kernel direct mapping tables up to 7cb70000 @ 16000-1a000
[ 0.000000] RAMDISK: 37ce4000 - 37fef0f8
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007cb70100 00064 (v01 A_M_I_ OEMXSDT 05000927 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007cb70290 000F4 (v03 A_M_I_ OEMFACP 05000927 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007cb70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007cb7e000 00040
[ 0.000000] ACPI: APIC 000000007cb70390 0006C (v01 A_M_I_ OEMAPIC 05000927 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007cb70400 0003C (v01 A_M_I_ OEMMCFG 05000927 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007cb7e040 00089 (v01 A_M_I_ AMI_OEM 05000927 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007cb78860 00038 (v01 A_M_I_ OEMHPET 05000927 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007cb7e0d0 02024 (v01 A_M_I_ GMCHSCI 05000927 MSFT 00000097)
[ 0.000000] ACPI: DMAR 000000007cb80100 00158 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007cb811d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007cb70
[ 0.000000] On node 0 totalpages: 510719
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6929 pages used for memmap
[ 0.000000] DMA32 zone: 499807 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [18000 - 187ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7cc00000 (gap: 7cc00000:82100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880002000000 s87784 r8192 d22808 u524288
[ 0.000000] pcpu-alloc: s87784 r8192 d22808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503734
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (51 early reservations)
[ 0.000000] #1 [0001000000 - 0001e9f494] TEXT DATA BSS
[ 0.000000] #2 [0037ce4000 - 0037fef0f8] RAMDISK
[ 0.000000] #3 [0001ea0000 - 0001ea0298] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009f400 - 00000e3da0] BIOS reserved
[ 0.000000] #7 [00000e3f84 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000e3da0 - 00000e3f84] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #12 [0001ea02c0 - 0001ea12c0] BOOTMEM
[ 0.000000] #13 [0001e9f4c0 - 0001e9f640] BOOTMEM
[ 0.000000] #14 [00026a2000 - 00042a2000] BOOTMEM
[ 0.000000] #15 [0001e9f640 - 0001e9f7c0] BOOTMEM
[ 0.000000] #16 [0001ea12c0 - 0001ead2c0] BOOTMEM
[ 0.000000] #17 [0001eae000 - 0001eaf000] BOOTMEM
[ 0.000000] #18 [0001e9f7c0 - 0001e9f801] BOOTMEM
[ 0.000000] #19 [0001e9f840 - 0001e9f883] BOOTMEM
[ 0.000000] #20 [0001e9f8c0 - 0001e9fb98] BOOTMEM
[ 0.000000] #21 [0001e9fbc0 - 0001e9fc28] BOOTMEM
[ 0.000000] #22 [0001e9fc40 - 0001e9fca8] BOOTMEM
[ 0.000000] #23 [0001e9fcc0 - 0001e9fd28] BOOTMEM
[ 0.000000] #24 [0001e9fd40 - 0001e9fda8] BOOTMEM
[ 0.000000] #25 [0001e9fdc0 - 0001e9fe28] BOOTMEM
[ 0.000000] #26 [0001e9fe40 - 0001e9fea8] BOOTMEM
[ 0.000000] #27 [0001e9fec0 - 0001e9ff28] BOOTMEM
[ 0.000000] #28 [0001e9ff40 - 0001e9ffa8] BOOTMEM
[ 0.000000] #29 [0001ead2c0 - 0001ead328] BOOTMEM
[ 0.000000] #30 [0001ead340 - 0001ead3a8] BOOTMEM
[ 0.000000] #31 [0001ead3c0 - 0001ead428] BOOTMEM
[ 0.000000] #32 [0001ead440 - 0001ead4a8] BOOTMEM
[ 0.000000] #33 [0001e9ffc0 - 0001e9ffe0] BOOTMEM
[ 0.000000] #34 [0001ead4c0 - 0001ead4df] BOOTMEM
[ 0.000000] #35 [0001ead500 - 0001ead51f] BOOTMEM
[ 0.000000] #36 [0002000000 - 000201d000] BOOTMEM
[ 0.000000] #37 [0002080000 - 000209d000] BOOTMEM
[ 0.000000] #38 [0002100000 - 000211d000] BOOTMEM
[ 0.000000] #39 [0002180000 - 000219d000] BOOTMEM
[ 0.000000] #40 [0001ead540 - 0001ead548] BOOTMEM
[ 0.000000] #41 [0001ead580 - 0001ead588] BOOTMEM
[ 0.000000] #42 [0001ead5c0 - 0001ead5d0] BOOTMEM
[ 0.000000] #43 [0001ead600 - 0001ead620] BOOTMEM
[ 0.000000] #44 [0001ead640 - 0001ead770] BOOTMEM
[ 0.000000] #45 [0001ead780 - 0001ead7d0] BOOTMEM
[ 0.000000] #46 [0001ead800 - 0001ead850] BOOTMEM
[ 0.000000] #47 [0001eaf000 - 0001eb7000] BOOTMEM
[ 0.000000] #48 [000219d000 - 000239d000] BOOTMEM
[ 0.000000] #49 [0001eb7000 - 0001fb7000] BOOTMEM
[ 0.000000] #50 [0001ead880 - 0001eadac0] BOOTMEM
[ 0.000000] 18 40 - 80 9f
[ 0.000000] 100 100 - 1000 1000
[ 0.000000] 1fb7 1fc0 - 2000 2000
[ 0.000000] 201d 2040 - 2080 2080
[ 0.000000] 209d 20c0 - 2100 2100
[ 0.000000] 211d 2140 - 2180 2180
[ 0.000000] 239d 23c0 - 2680 26a2
[ 0.000000] 42a2 42c0 - 37cc0 37ce4
[ 0.000000] 37ff0 38000 - 7cb40 7cb70
[ 0.000000] Memory: 1992448k/2043328k available (6396k kernel code, 452k absent, 50428k reserved, 6896k data, 564k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.771 MHz processor.
[ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.54 BogoMIPS (lpj=2666771)
[ 0.002392] Security Framework initialized
[ 0.002578] SELinux: Initializing.
[ 0.002766] SELinux: Starting in permissive mode
[ 0.002773] Mount-cache hash table entries: 256
[ 0.003120] Initializing cgroup subsys ns
[ 0.003300] Initializing cgroup subsys cpuacct
[ 0.003480] Initializing cgroup subsys freezer
[ 0.003676] CPU: Physical Processor ID: 0
[ 0.003853] CPU: Processor Core ID: 0
[ 0.004003] mce: CPU supports 6 MCE banks
[ 0.004185] using mwait in idle threads.
[ 0.004362] Performance Events: Core2 events, Intel PMU driver.
[ 0.004608] ... version: 2
[ 0.004791] ... bit width: 40
[ 0.005001] ... generic registers: 2
[ 0.005183] ... value mask: 000000ffffffffff
[ 0.005368] ... max period: 000000007fffffff
[ 0.005554] ... fixed-purpose events: 3
[ 0.005743] ... event mask: 0000000700000003
[ 0.006911] ACPI: Core revision 20100121
[ 0.017357] Setting APIC routing to flat
[ 0.017834] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028026] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.028999] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.245005] Brought up 4 CPUs
[ 0.245203] Total of 4 processors activated (21331.12 BogoMIPS).
[ 0.247082] Time: 2:54:15 Date: 03/13/10
[ 0.248041] NET: Registered protocol family 16
[ 0.248246] ACPI: bus type pci registered
[ 0.249036] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.249366] PCI: not using MMCONFIG
[ 0.249549] PCI: Using configuration type 1 for base access
[ 0.266048] bio: create slab <bio-0> at 0
[ 0.267449] ACPI: EC: Look up EC in DSDT
[ 0.268669] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.275623] ACPI: Interpreter enabled
[ 0.275812] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.277003] ACPI: Using IOAPIC for interrupt routing
[ 0.277238] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.278390] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.307076] ACPI Warning: Incorrect checksum in table [OEMB] - C5, should be BC (20100121/tbutils-314)
[ 0.308150] ACPI: No dock devices found.
[ 0.308338] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.308801] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.309238] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.309427] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.309616] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.310002] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.310337] pci_root PNP0A08:00: host bridge window [mem 0x7cc00000-0xdfffffff]
[ 0.310675] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.311052] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.311055] pci 0000:00:01.0: PME# disabled
[ 0.311071] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.311076] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.311079] pci 0000:00:02.0: reg 20: [io 0xbc00-0xbc07]
[ 0.311127] pci 0000:00:03.0: reg 10: [mem 0xfe6fb000-0xfe6fb00f 64bit]
[ 0.311181] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.311185] pci 0000:00:03.0: PME# disabled
[ 0.311232] pci 0000:00:19.0: reg 10: [mem 0xfe6c0000-0xfe6dffff]
[ 0.311237] pci 0000:00:19.0: reg 14: [mem 0xfe6fa000-0xfe6fafff]
[ 0.311242] pci 0000:00:19.0: reg 18: [io 0xb880-0xb89f]
[ 0.311273] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.311276] pci 0000:00:19.0: PME# disabled
[ 0.311314] pci 0000:00:1a.0: reg 20: [io 0xb400-0xb41f]
[ 0.311366] pci 0000:00:1a.1: reg 20: [io 0xb480-0xb49f]
[ 0.311418] pci 0000:00:1a.2: reg 20: [io 0xb800-0xb81f]
[ 0.311469] pci 0000:00:1a.7: reg 10: [mem 0xfe6f9000-0xfe6f93ff]
[ 0.311514] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.311518] pci 0000:00:1a.7: PME# disabled
[ 0.311545] pci 0000:00:1b.0: reg 10: [mem 0xfe6f0000-0xfe6f3fff 64bit]
[ 0.311578] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.311581] pci 0000:00:1b.0: PME# disabled
[ 0.311630] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.311633] pci 0000:00:1c.0: PME# disabled
[ 0.311687] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.311690] pci 0000:00:1c.4: PME# disabled
[ 0.311739] pci 0000:00:1d.0: reg 20: [io 0xac00-0xac1f]
[ 0.311801] pci 0000:00:1d.1: reg 20: [io 0xb000-0xb01f]
[ 0.311853] pci 0000:00:1d.2: reg 20: [io 0xb080-0xb09f]
[ 0.311905] pci 0000:00:1d.7: reg 10: [mem 0xfe6f8000-0xfe6f83ff]
[ 0.312033] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.312037] pci 0000:00:1d.7: PME# disabled
[ 0.312163] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.312168] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.312172] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.312176] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.312181] pci 0000:00:1f.2: reg 20: [io 0xff90-0xff9f]
[ 0.312185] pci 0000:00:1f.2: reg 24: [io 0xffa0-0xffaf]
[ 0.312221] pci 0000:00:1f.3: reg 10: [mem 0xfe6ef000-0xfe6ef0ff 64bit]
[ 0.312232] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.312262] pci 0000:00:1f.5: reg 10: [io 0xa880-0xa887]
[ 0.312266] pci 0000:00:1f.5: reg 14: [io 0xa800-0xa803]
[ 0.312271] pci 0000:00:1f.5: reg 18: [io 0xa480-0xa487]
[ 0.312275] pci 0000:00:1f.5: reg 1c: [io 0xa400-0xa403]
[ 0.312279] pci 0000:00:1f.5: reg 20: [io 0xa080-0xa08f]
[ 0.312284] pci 0000:00:1f.5: reg 24: [io 0xa000-0xa00f]
[ 0.312340] pci 0000:01:00.0: reg 10: [mem 0xfe7e0000-0xfe7fffff]
[ 0.312371] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.312374] pci 0000:01:00.0: PME# disabled
[ 0.312386] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.312571] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.312573] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe9fffff]
[ 0.312576] pci 0000:00:01.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[ 0.312653] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.312656] pci 0000:02:01.0: PME# disabled
[ 0.312708] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.312711] pci 0000:02:02.0: PME# disabled
[ 0.312741] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.312948] pci 0000:01:00.0: bridge window [io 0xc000-0xcfff]
[ 0.312951] pci 0000:01:00.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.312955] pci 0000:01:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[ 0.313022] pci 0000:03:00.0: reg 10: [mem 0xfe8fe000-0xfe8fffff 64bit]
[ 0.313078] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.313082] pci 0000:03:00.0: PME# disabled
[ 0.313098] pci 0000:02:01.0: PCI bridge to [bus 03-03]
[ 0.313287] pci 0000:02:01.0: bridge window [io f000 - 0000] reg reading
[ 0.313290] pci 0000:02:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.313295] pci 0000:02:01.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[ 0.313347] pci 0000:04:00.0: reg 10: [io 0xcc00-0xcc07]
[ 0.313353] pci 0000:04:00.0: reg 14: [io 0xc880-0xc883]
[ 0.313358] pci 0000:04:00.0: reg 18: [io 0xc800-0xc807]
[ 0.313364] pci 0000:04:00.0: reg 1c: [io 0xc480-0xc483]
[ 0.313369] pci 0000:04:00.0: reg 20: [io 0xc400-0xc40f]
[ 0.313375] pci 0000:04:00.0: reg 24: [mem 0xfe9ff800-0xfe9fffff]
[ 0.313381] pci 0000:04:00.0: reg 30: [mem 0xfe9e0000-0xfe9effff pref]
[ 0.313404] pci 0000:04:00.0: PME# supported from D3hot
[ 0.313407] pci 0000:04:00.0: PME# disabled
[ 0.313418] pci 0000:02:02.0: PCI bridge to [bus 04-04]
[ 0.313607] pci 0000:02:02.0: bridge window [io 0xc000-0xcfff]
[ 0.313610] pci 0000:02:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.313615] pci 0000:02:02.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[ 0.313657] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
[ 0.313863] pci 0000:00:1c.0: bridge window [io f000 - 0000] reg reading
[ 0.313866] pci 0000:00:1c.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
[ 0.313871] pci 0000:00:1c.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.313925] pci 0000:05:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.313932] pci 0000:05:00.0: reg 14: [io 0xd880-0xd883]
[ 0.313939] pci 0000:05:00.0: reg 18: [io 0xd800-0xd807]
[ 0.313945] pci 0000:05:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.313952] pci 0000:05:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.313959] pci 0000:05:00.0: reg 24: [mem 0xfeaff000-0xfeaff1ff]
[ 0.313994] pci 0000:05:00.0: supports D1
[ 0.313995] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.314002] pci 0000:05:00.0: PME# disabled
[ 0.314015] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.314202] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.314205] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.314210] pci 0000:00:1c.4: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[ 0.314246] pci 0000:07:00.0: reg 10: [mem 0xfd800000-0xfdffffff pref]
[ 0.314251] pci 0000:07:00.0: reg 14: [mem 0xfebf0000-0xfebfffff]
[ 0.314257] pci 0000:07:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.314275] pci 0000:07:00.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.314290] pci 0000:07:00.0: supports D2
[ 0.314316] pci 0000:07:03.0: reg 10: [mem 0xfebdf000-0xfebdffff]
[ 0.314354] pci 0000:07:03.0: supports D1 D2
[ 0.314355] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.314359] pci 0000:07:03.0: PME# disabled
[ 0.314394] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.314579] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.314582] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.314587] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfdffffff 64bit pref]
[ 0.314589] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.314591] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.314593] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.314595] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.314597] pci 0000:00:1e.0: bridge window [mem 0x7cc00000-0xdfffffff] (subtractive decode)
[ 0.314599] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.314612] pci_bus 0000:00: on NUMA node 0
[ 0.314616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.314760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.314846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.314903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.314983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.335078] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.335567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.336091] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.336744] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.337512] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.338090] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.338746] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.339475] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.340040] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.340381] vgaarb: loaded
[ 0.341026] SCSI subsystem initialized
[ 0.341202] libata version 3.00 loaded.
[ 0.342048] usbcore: registered new interface driver usbfs
[ 0.342048] usbcore: registered new interface driver hub
[ 0.342200] usbcore: registered new device driver usb
[ 0.343025] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[ 0.343205] PCI: Using ACPI for IRQ routing
[ 0.343389] PCI: pci_cache_line_size set to 64 bytes
[ 0.343494] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.343496] reserve RAM buffer: 000000007cb70000 - 000000007fffffff
[ 0.344042] cfg80211: Calling CRDA to update world regulatory domain
[ 0.344042] NetLabel: Initializing
[ 0.344179] NetLabel: domain hash size = 128
[ 0.344376] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.344564] NetLabel: unlabeled traffic allowed by default
[ 0.345050] alloc irq_desc for 24 on node 0
[ 0.345051] alloc kstat_irqs on node 0
[ 0.345057] alloc irq_desc for 25 on node 0
[ 0.345058] alloc kstat_irqs on node 0
[ 0.345062] alloc irq_desc for 26 on node 0
[ 0.345063] alloc kstat_irqs on node 0
[ 0.345067] alloc irq_desc for 27 on node 0
[ 0.345068] alloc kstat_irqs on node 0
[ 0.345070] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
[ 0.345265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
[ 0.345745] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.349020] hpet: hpet2 irq 24 for MSI
[ 0.350017] hpet: hpet3 irq 25 for MSI
[ 0.414020] hpet: hpet4 irq 26 for MSI
[ 0.552025] hpet: hpet5 irq 27 for MSI
[ 0.557003] Switching to clocksource tsc
[ 0.570723] pnp: PnP ACPI init
[ 0.570867] ACPI: bus type pnp registered
[ 0.574969] pnp: PnP ACPI: found 18 devices
[ 0.575172] ACPI: ACPI bus type pnp unregistered
[ 0.575363] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
[ 0.575553] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.575746] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.575936] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.576145] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.576327] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.576510] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.576693] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.576877] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.577081] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.577268] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.577454] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.577638] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.577826] system 00:10: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.578036] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.578226] system 00:11: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.578417] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.578607] system 00:11: [mem 0x00100000-0x7cbfffff] could not be reserved
[ 0.578801] system 00:11: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.584256] PCI: max bus depth: 3 pci_try_num: 4
[ 0.584293] pci 0000:02:01.0: PCI bridge to [bus 03-03]
[ 0.584480] pci 0000:02:01.0: bridge window [io disabled]
[ 0.584669] pci 0000:02:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.584860] pci 0000:02:01.0: bridge window [mem pref disabled]
[ 0.585073] pci 0000:02:02.0: PCI bridge to [bus 04-04]
[ 0.585265] pci 0000:02:02.0: bridge window [io 0xc000-0xcfff]
[ 0.585458] pci 0000:02:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.585649] pci 0000:02:02.0: bridge window [mem pref disabled]
[ 0.585839] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.586044] pci 0000:01:00.0: bridge window [io 0xc000-0xcfff]
[ 0.586234] pci 0000:01:00.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.586425] pci 0000:01:00.0: bridge window [mem pref disabled]
[ 0.586621] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.586809] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.587009] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe9fffff]
[ 0.587205] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 0.587395] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
[ 0.587581] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.587770] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.587958] pci 0000:00:1c.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.588317] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.588504] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.588694] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.588885] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.589098] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.589288] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.589480] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.589671] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfdffffff 64bit pref]
[ 0.590032] alloc irq_desc for 16 on node -1
[ 0.590034] alloc kstat_irqs on node -1
[ 0.590038] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.590229] pci 0000:00:01.0: setting latency timer to 64
[ 0.590235] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.590426] pci 0000:01:00.0: setting latency timer to 64
[ 0.590431] alloc irq_desc for 17 on node -1
[ 0.590433] alloc kstat_irqs on node -1
[ 0.590435] pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.590620] pci 0000:02:01.0: setting latency timer to 64
[ 0.590626] alloc irq_desc for 18 on node -1
[ 0.590627] alloc kstat_irqs on node -1
[ 0.590630] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.590814] pci 0000:02:02.0: setting latency timer to 64
[ 0.590820] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.591024] pci 0000:00:1c.0: setting latency timer to 64
[ 0.591030] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.591214] pci 0000:00:1c.4: setting latency timer to 64
[ 0.591219] pci 0000:00:1e.0: setting latency timer to 64
[ 0.591222] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.591224] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.591226] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.591228] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.591230] pci_bus 0000:00: resource 8 [mem 0x7cc00000-0xdfffffff]
[ 0.591232] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.591234] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.591235] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe9fffff]
[ 0.591237] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.591239] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.591241] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.591242] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.591244] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.591246] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.591248] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.591249] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.591251] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.591253] pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.591255] pci_bus 0000:07: resource 2 [mem 0xfd800000-0xfdffffff 64bit pref]
[ 0.591257] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.591258] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.591260] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.591262] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.591263] pci_bus 0000:07: resource 8 [mem 0x7cc00000-0xdfffffff]
[ 0.591265] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.591286] NET: Registered protocol family 2
[ 0.591501] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.591947] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.593876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.594577] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.594767] TCP reno registered
[ 0.594950] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.595173] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.595488] NET: Registered protocol family 1
[ 0.595898] RPC: Registered udp transport module.
[ 0.596109] RPC: Registered tcp transport module.
[ 0.596293] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.596505] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.596506] pci 0000:00:1a.0: Performing full reset
[ 0.596522] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.596523] pci 0000:00:1a.1: Performing full reset
[ 0.596538] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.596540] pci 0000:00:1a.2: Performing full reset
[ 0.596590] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.596591] pci 0000:00:1d.0: Performing full reset
[ 0.596606] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.596608] pci 0000:00:1d.1: Performing full reset
[ 0.596623] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.596624] pci 0000:00:1d.2: Performing full reset
[ 0.596680] pci 0000:07:00.0: Boot video device
[ 0.596685] PCI: CLS 32 bytes, default 64
[ 0.596739] Trying to unpack rootfs image as initramfs...
[ 0.649203] Freeing initrd memory: 3116k freed
[ 0.650833] kvm: already loaded the other module
[ 0.653212] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.653416] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.653618] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.653810] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.654128] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.654477] Scanning for low memory corruption every 60 seconds
[ 0.654991] audit: initializing netlink socket (disabled)
[ 0.655207] type=2000 audit(1268448854.655:1): initialized
[ 0.674896] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.678710] VFS: Disk quotas dquot_6.5.2
[ 0.678974] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.680227] fuse init (API version 7.13)
[ 0.681039] Btrfs loaded
[ 0.681228] msgmni has been set to 3897
[ 0.681516] SELinux: Registering netfilter hooks
[ 0.682184] alg: No test for stdrng (krng)
[ 0.682491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.682833] io scheduler noop registered
[ 0.683034] io scheduler deadline registered
[ 0.683354] io scheduler cfq registered (default)
[ 0.683666] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.683682] alloc irq_desc for 28 on node -1
[ 0.683683] alloc kstat_irqs on node -1
[ 0.683690] pcieport 0000:00:01.0: irq 28 for MSI/MSI-X
[ 0.683822] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.683845] alloc irq_desc for 29 on node -1
[ 0.683846] alloc kstat_irqs on node -1
[ 0.683852] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
[ 0.683995] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.684032] alloc irq_desc for 30 on node -1
[ 0.684033] alloc kstat_irqs on node -1
[ 0.684039] pcieport 0000:00:1c.4: irq 30 for MSI/MSI-X
[ 0.684159] pcieport 0000:01:00.0: setting latency timer to 64
[ 0.684183] alloc irq_desc for 31 on node -1
[ 0.684185] alloc kstat_irqs on node -1
[ 0.684191] pcieport 0000:01:00.0: irq 31 for MSI/MSI-X
[ 0.684337] pcieport 0000:02:01.0: setting latency timer to 64
[ 0.684361] alloc irq_desc for 32 on node -1
[ 0.684363] alloc kstat_irqs on node -1
[ 0.684369] pcieport 0000:02:01.0: irq 32 for MSI/MSI-X
[ 0.684507] pcieport 0000:02:02.0: setting latency timer to 64
[ 0.684532] alloc irq_desc for 33 on node -1
[ 0.684533] alloc kstat_irqs on node -1
[ 0.684540] pcieport 0000:02:02.0: irq 33 for MSI/MSI-X
[ 0.684834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.685432] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.685774] ACPI: Power Button [PWRB]
[ 0.686038] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.686377] ACPI: Power Button [PWRF]
[ 0.687152] ACPI: SSDT 000000007cb80260 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.688066] ACPI: SSDT 000000007cb80b60 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.689069] Monitor-Mwait will be used to enter C-1 state
[ 0.689117] Monitor-Mwait will be used to enter C-2 state
[ 0.689174] Monitor-Mwait will be used to enter C-3 state
[ 0.689186] Marking TSC unstable due to TSC halts in idle
[ 0.689446] Switching to clocksource hpet
[ 0.689898] ACPI: SSDT 000000007cb804a0 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.690748] ACPI: SSDT 000000007cb81020 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.696339] ACPI: SSDT 000000007cb806e0 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.697146] ACPI: SSDT 000000007cb810b0 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.698750] ACPI: SSDT 000000007cb80920 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.699569] ACPI: SSDT 000000007cb81140 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 0.703232] XENFS: not registering filesystem on non-xen platform
[ 0.708034] Non-volatile memory driver v1.3
[ 0.708330] Linux agpgart interface v0.103
[ 0.708591] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 0.709702] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.821524] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.821878] [drm] Initialized drm 1.1.0 20060810
[ 0.822157] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.066117] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.066946] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.070120] brd: module loaded
[ 1.071635] loop: module loaded
[ 1.072277] ahci 0000:04:00.0: version 3.0
[ 1.072291] ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.072517] alloc irq_desc for 34 on node -1
[ 1.072519] alloc kstat_irqs on node -1
[ 1.072527] ahci 0000:04:00.0: irq 34 for MSI/MSI-X
[ 1.072568] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.072907] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.073293] ahci 0000:04:00.0: setting latency timer to 64
[ 1.073299] ahci 0000:04:00.0: The port is not capable of FBS
[ 1.073526] ahci 0000:04:00.0: The port is not capable of FBS
[ 1.073822] scsi0 : ahci
[ 1.074229] scsi1 : ahci
[ 1.074564] ata1: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ff900 irq 34
[ 1.074905] ata2: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ff980 irq 34
[ 1.075386] ata_piix 0000:00:1f.2: version 2.13
[ 1.075394] alloc irq_desc for 22 on node -1
[ 1.075395] alloc kstat_irqs on node -1
[ 1.075399] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.075591] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.075952] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.076033] scsi2 : ata_piix
[ 1.076479] scsi3 : ata_piix
[ 1.078064] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.078280] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 1.078499] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.078729] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.079102] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.079170] scsi4 : ata_piix
[ 1.079556] scsi5 : ata_piix
[ 1.080943] ata5: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 22
[ 1.081161] ata6: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 22
[ 1.081855] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.082058] Copyright (c) 1999-2006 Intel Corporation.
[ 1.082344] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.082536] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 1.082744] alloc irq_desc for 20 on node -1
[ 1.082745] alloc kstat_irqs on node -1
[ 1.082749] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.082944] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.083008] alloc irq_desc for 35 on node -1
[ 1.083009] alloc kstat_irqs on node -1
[ 1.083021] e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
[ 1.212796] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:54:9a:46:ea
[ 1.213152] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.213393] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 1.213741] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.213930] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.214371] sky2: driver version 1.27
[ 1.214797] tun: Universal TUN/TAP device driver, 1.6
[ 1.214982] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 1.215431] console [netcon0] enabled
[ 1.215617] netconsole: network logging started
[ 1.216079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.216291] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.216306] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.216510] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.216513] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.216717] drivers/usb/core/inode.c: creating file 'devices'
[ 1.216721] drivers/usb/core/inode.c: creating file '001'
[ 1.216828] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.217191] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 1.217195] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 1.217212] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.217409] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.221301] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.221303] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 1.221314] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6f9000
[ 1.221506] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.225388] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.231015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.231229] usb usb1: default language 0x0409
[ 1.231234] usb usb1: udev 1, busnum 1, minor = 0
[ 1.231236] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.231437] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.231770] usb usb1: Product: EHCI Host Controller
[ 1.231954] usb usb1: Manufacturer: Linux 2.6.34-rc1 ehci_hcd
[ 1.232154] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.232464] usb usb1: usb_probe_device
[ 1.232466] usb usb1: configuration #1 chosen from 1 choice
[ 1.232471] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.232573] hub 1-0:1.0: usb_probe_interface
[ 1.232574] hub 1-0:1.0: usb_probe_interface - got id
[ 1.232576] hub 1-0:1.0: USB hub found
[ 1.232762] hub 1-0:1.0: 6 ports detected
[ 1.232944] hub 1-0:1.0: standalone hub
[ 1.232945] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.232946] hub 1-0:1.0: individual port over-current protection
[ 1.232948] hub 1-0:1.0: power on to power good time: 20ms
[ 1.232951] hub 1-0:1.0: local power source is good
[ 1.232953] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.232976] drivers/usb/core/inode.c: creating file '001'
[ 1.233014] alloc irq_desc for 23 on node -1
[ 1.233016] alloc kstat_irqs on node -1
[ 1.233020] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.233232] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.233235] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.233441] drivers/usb/core/inode.c: creating file '002'
[ 1.233547] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.233875] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 1.233878] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 1.233895] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.234075] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.237961] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.237963] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.237972] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6f8000
[ 1.238178] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.242048] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.247015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.247234] usb usb2: default language 0x0409
[ 1.247239] usb usb2: udev 1, busnum 2, minor = 128
[ 1.247240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.247441] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.247774] usb usb2: Product: EHCI Host Controller
[ 1.247954] usb usb2: Manufacturer: Linux 2.6.34-rc1 ehci_hcd
[ 1.248148] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.248450] usb usb2: usb_probe_device
[ 1.248451] usb usb2: configuration #1 chosen from 1 choice
[ 1.248456] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.248556] hub 2-0:1.0: usb_probe_interface
[ 1.248558] hub 2-0:1.0: usb_probe_interface - got id
[ 1.248559] hub 2-0:1.0: USB hub found
[ 1.248738] hub 2-0:1.0: 6 ports detected
[ 1.248915] hub 2-0:1.0: standalone hub
[ 1.248916] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.248917] hub 2-0:1.0: individual port over-current protection
[ 1.248919] hub 2-0:1.0: power on to power good time: 20ms
[ 1.248922] hub 2-0:1.0: local power source is good
[ 1.248923] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.248944] drivers/usb/core/inode.c: creating file '001'
[ 1.249165] 116x: driver isp116x-hcd, 03 Nov 2005
[ 1.249443] driver isp1362-hcd, 2005-04-04
[ 1.249719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.249907] ohci_hcd: block sizes: ed 80 td 96
[ 1.250006] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.250228] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.250431] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.250434] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.250628] drivers/usb/core/inode.c: creating file '003'
[ 1.250735] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.251077] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.251283] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.251284] uhci_hcd 0000:00:1a.0: Performing full reset
[ 1.251296] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 1.251306] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 1.251520] usb usb3: default language 0x0409
[ 1.251525] usb usb3: udev 1, busnum 3, minor = 256
[ 1.251526] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.251716] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.252055] usb usb3: Product: UHCI Host Controller
[ 1.252265] usb usb3: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
[ 1.252462] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.252763] usb usb3: usb_probe_device
[ 1.252765] usb usb3: configuration #1 chosen from 1 choice
[ 1.252770] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.252870] hub 3-0:1.0: usb_probe_interface
[ 1.252872] hub 3-0:1.0: usb_probe_interface - got id
[ 1.252873] hub 3-0:1.0: USB hub found
[ 1.253056] hub 3-0:1.0: 2 ports detected
[ 1.253262] hub 3-0:1.0: standalone hub
[ 1.253263] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.253264] hub 3-0:1.0: individual port over-current protection
[ 1.253266] hub 3-0:1.0: power on to power good time: 2ms
[ 1.253269] hub 3-0:1.0: local power source is good
[ 1.253270] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.253282] drivers/usb/core/inode.c: creating file '001'
[ 1.253308] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 1.253325] alloc irq_desc for 21 on node -1
[ 1.253327] alloc kstat_irqs on node -1
[ 1.253330] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.253528] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.253531] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.253718] drivers/usb/core/inode.c: creating file '004'
[ 1.253826] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.254174] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.254367] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.254369] uhci_hcd 0000:00:1a.1: Performing full reset
[ 1.254382] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 1.254392] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 1.254603] usb usb4: default language 0x0409
[ 1.254608] usb usb4: udev 1, busnum 4, minor = 384
[ 1.254610] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.254804] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.255154] usb usb4: Product: UHCI Host Controller
[ 1.255347] usb usb4: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
[ 1.255538] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.255839] usb usb4: usb_probe_device
[ 1.255841] usb usb4: configuration #1 chosen from 1 choice
[ 1.255845] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.255946] hub 4-0:1.0: usb_probe_interface
[ 1.255947] hub 4-0:1.0: usb_probe_interface - got id
[ 1.255949] hub 4-0:1.0: USB hub found
[ 1.256141] hub 4-0:1.0: 2 ports detected
[ 1.256342] hub 4-0:1.0: standalone hub
[ 1.256343] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.256344] hub 4-0:1.0: individual port over-current protection
[ 1.256346] hub 4-0:1.0: power on to power good time: 2ms
[ 1.256349] hub 4-0:1.0: local power source is good
[ 1.256350] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.256360] drivers/usb/core/inode.c: creating file '001'
[ 1.256384] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 1.256401] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.256596] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.256598] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.256786] drivers/usb/core/inode.c: creating file '005'
[ 1.256892] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.257246] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.257446] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.257448] uhci_hcd 0000:00:1a.2: Performing full reset
[ 1.257459] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 1.257463] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000b800
[ 1.257671] usb usb5: default language 0x0409
[ 1.257676] usb usb5: udev 1, busnum 5, minor = 512
[ 1.257678] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.257866] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.258215] usb usb5: Product: UHCI Host Controller
[ 1.258408] usb usb5: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
[ 1.258595] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.258899] usb usb5: usb_probe_device
[ 1.258901] usb usb5: configuration #1 chosen from 1 choice
[ 1.258905] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.259004] hub 5-0:1.0: usb_probe_interface
[ 1.259006] hub 5-0:1.0: usb_probe_interface - got id
[ 1.259007] hub 5-0:1.0: USB hub found
[ 1.259207] hub 5-0:1.0: 2 ports detected
[ 1.259399] hub 5-0:1.0: standalone hub
[ 1.259400] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.259402] hub 5-0:1.0: individual port over-current protection
[ 1.259403] hub 5-0:1.0: power on to power good time: 2ms
[ 1.259406] hub 5-0:1.0: local power source is good
[ 1.259408] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.259418] drivers/usb/core/inode.c: creating file '001'
[ 1.259438] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 1.259456] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.259648] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.259650] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.259836] drivers/usb/core/inode.c: creating file '006'
[ 1.259944] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.260305] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.260500] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.260502] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.260513] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.260517] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ac00
[ 1.260725] usb usb6: default language 0x0409
[ 1.260730] usb usb6: udev 1, busnum 6, minor = 640
[ 1.260731] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.260920] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.261278] usb usb6: Product: UHCI Host Controller
[ 1.261469] usb usb6: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
[ 1.261655] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.261954] usb usb6: usb_probe_device
[ 1.261956] usb usb6: configuration #1 chosen from 1 choice
[ 1.261960] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.262068] hub 6-0:1.0: usb_probe_interface
[ 1.262070] hub 6-0:1.0: usb_probe_interface - got id
[ 1.262071] hub 6-0:1.0: USB hub found
[ 1.262270] hub 6-0:1.0: 2 ports detected
[ 1.262452] hub 6-0:1.0: standalone hub
[ 1.262453] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.262454] hub 6-0:1.0: individual port over-current protection
[ 1.262455] hub 6-0:1.0: power on to power good time: 2ms
[ 1.262458] hub 6-0:1.0: local power source is good
[ 1.262460] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.262470] drivers/usb/core/inode.c: creating file '001'
[ 1.262494] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 1.262507] alloc irq_desc for 19 on node -1
[ 1.262509] alloc kstat_irqs on node -1
[ 1.262512] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.262699] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.262701] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.262884] drivers/usb/core/inode.c: creating file '007'
[ 1.262992] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.263340] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.263525] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.263527] uhci_hcd 0000:00:1d.1: Performing full reset
[ 1.263538] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 1.263548] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 1.263754] usb usb7: default language 0x0409
[ 1.263759] usb usb7: udev 1, busnum 7, minor = 768
[ 1.263761] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.263950] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.264307] usb usb7: Product: UHCI Host Controller
[ 1.264496] usb usb7: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
[ 1.264683] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.264983] usb usb7: usb_probe_device
[ 1.264984] usb usb7: configuration #1 chosen from 1 choice
[ 1.264989] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 1.265092] hub 7-0:1.0: usb_probe_interface
[ 1.265093] hub 7-0:1.0: usb_probe_interface - got id
[ 1.265095] hub 7-0:1.0: USB hub found
[ 1.265302] hub 7-0:1.0: 2 ports detected
[ 1.265492] hub 7-0:1.0: standalone hub
[ 1.265493] hub 7-0:1.0: no power switching (usb 1.0)
[ 1.265494] hub 7-0:1.0: individual port over-current protection
[ 1.265495] hub 7-0:1.0: power on to power good time: 2ms
[ 1.265498] hub 7-0:1.0: local power source is good
[ 1.265500] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 1.265512] drivers/usb/core/inode.c: creating file '001'
[ 1.265535] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 1.265549] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.265745] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.265747] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.265938] drivers/usb/core/inode.c: creating file '008'
[ 1.266053] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.266415] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.266602] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.266603] uhci_hcd 0000:00:1d.2: Performing full reset
[ 1.266615] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 1.266619] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 1.266829] usb usb8: default language 0x0409
[ 1.266834] usb usb8: udev 1, busnum 8, minor = 896
[ 1.266835] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.267028] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.267391] usb usb8: Product: UHCI Host Controller
[ 1.267575] usb usb8: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
[ 1.267763] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.268071] usb usb8: usb_probe_device
[ 1.268073] usb usb8: configuration #1 chosen from 1 choice
[ 1.268078] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 1.268184] hub 8-0:1.0: usb_probe_interface
[ 1.268186] hub 8-0:1.0: usb_probe_interface - got id
[ 1.268187] hub 8-0:1.0: USB hub found
[ 1.268376] hub 8-0:1.0: 2 ports detected
[ 1.272456] hub 8-0:1.0: standalone hub
[ 1.272457] hub 8-0:1.0: no power switching (usb 1.0)
[ 1.272459] hub 8-0:1.0: individual port over-current protection
[ 1.272460] hub 8-0:1.0: power on to power good time: 2ms
[ 1.272463] hub 8-0:1.0: local power source is good
[ 1.272465] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 1.272475] drivers/usb/core/inode.c: creating file '001'
[ 1.272500] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 1.272620] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.272818] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 1.272821] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.273008] drivers/usb/core/inode.c: creating file '009'
[ 1.273121] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 1.273588] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[ 1.273598] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfe8fe000
[ 1.273814] usb usb9: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 1.274164] usb usb9: default language 0x0409
[ 1.274168] usb usb9: udev 1, busnum 9, minor = 1024
[ 1.274170] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.274367] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.274705] usb usb9: Product: xHCI Host Controller
[ 1.274892] usb usb9: Manufacturer: Linux 2.6.34-rc1 xhci_hcd
[ 1.275082] usb usb9: SerialNumber: 0000:03:00.0
[ 1.275394] usb usb9: usb_probe_device
[ 1.275396] usb usb9: configuration #1 chosen from 1 choice
[ 1.275398] xHCI xhci_add_endpoint called for root hub
[ 1.275400] xHCI xhci_check_bandwidth called for root hub
[ 1.275404] usb usb9: adding 9-0:1.0 (config #1, interface 0)
[ 1.275506] hub 9-0:1.0: usb_probe_interface
[ 1.275508] hub 9-0:1.0: usb_probe_interface - got id
[ 1.275509] hub 9-0:1.0: USB hub found
[ 1.275694] hub 9-0:1.0: 4 ports detected
[ 1.275875] hub 9-0:1.0: standalone hub
[ 1.275876] hub 9-0:1.0: individual port power switching
[ 1.275878] hub 9-0:1.0: individual port over-current protection
[ 1.275879] hub 9-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.275881] hub 9-0:1.0: power on to power good time: 20ms
[ 1.275884] hub 9-0:1.0: local power source is good
[ 1.275885] hub 9-0:1.0: enabling power on all ports
[ 1.275910] drivers/usb/core/inode.c: creating file '001'
[ 1.276032] sl811: driver sl811-hcd, 19 May 2005
[ 1.276423] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 1.277195] usbcore: registered new interface driver usblp
[ 1.277384] Initializing USB Mass Storage driver...
[ 1.277680] usbcore: registered new interface driver usb-storage
[ 1.277862] USB Mass Storage support registered.
[ 1.278165] usbcore: registered new interface driver libusual
[ 1.278532] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.281396] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.281594] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.281999] mice: PS/2 mouse device common for all mice
[ 1.282622] rtc_cmos 00:03: RTC can wake from S4
[ 1.282909] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.283126] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.283447] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.283785] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 1.284133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.284934] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
[ 1.286720] cpuidle: using governor ladder
[ 1.289284] cpuidle: using governor menu
[ 1.291559] usbcore: registered new interface driver hiddev
[ 1.291808] usbcore: registered new interface driver usbhid
[ 1.291991] usbhid: USB HID core driver
[ 1.294612] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.294979] alloc irq_desc for 36 on node -1
[ 1.294981] alloc kstat_irqs on node -1
[ 1.294990] HDA Intel 0000:00:1b.0: irq 36 for MSI/MSI-X
[ 1.295017] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1.306016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.310131] ALSA device list:
[ 1.310333] #0: HDA Intel at 0xfe6f0000 irq 36
[ 1.310576] Netfilter messages via NETLINK v0.30.
[ 1.310786] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.311151] ctnetlink v0.93: registering with nfnetlink.
[ 1.311721] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.311931] TCP cubic registered
[ 1.312124] Initializing XFRM netlink socket
[ 1.312761] NET: Registered protocol family 10
[ 1.313551] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.313779] IPv6 over IPv4 tunneling driver
[ 1.314431] NET: Registered protocol family 17
[ 1.316507] PM: Resume from disk failed.
[ 1.316518] registered taskstats version 1
[ 1.317014] Magic number: 2:58:915
[ 1.333302] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.349347] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.352441] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.355127] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.359103] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.362098] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.365105] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.372295] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.375094] hub 9-0:1.0: port 3: status 0101 change 0001
[ 1.381100] ata2: SATA link down (SStatus 0 SControl 370)
[ 1.381108] ata1: SATA link down (SStatus 0 SControl 370)
[ 1.397715] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.408334] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.470309] logips2pp: Detected unknown logitech mouse model 57
[ 1.475094] hub 9-0:1.0: state 7 ports 4 chg 0008 evt 0000
[ 1.475101] hub 9-0:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 1.577153] usb 9-3: new full speed USB device using xhci_hcd and address 0
[ 1.594041] usb 9-3: ep0 maxpacket = 8
[ 1.594170] usb 9-3: Successful evaluate context command
[ 1.698747] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.698944] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.738043] usb 9-3: skipped 4 descriptors after interface
[ 1.738045] usb 9-3: skipped 2 descriptors after interface
[ 1.738048] usb 9-3: skipped 1 descriptor after endpoint
[ 1.738050] usb 9-3: skipped 2 descriptors after interface
[ 1.738053] usb 9-3: skipped 1 descriptor after endpoint
[ 1.738055] usb 9-3: skipped 2 descriptors after interface
[ 1.738057] usb 9-3: skipped 1 descriptor after endpoint
[ 1.738059] usb 9-3: skipped 2 descriptors after interface
[ 1.738061] usb 9-3: skipped 1 descriptor after endpoint
[ 1.741021] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 1.742039] usb 9-3: default language 0x0409
[ 1.765016] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 1.766036] usb 9-3: udev 2, busnum 9, minor = 1025
[ 1.766038] usb 9-3: New USB device found, idVendor=0471, idProduct=0311
[ 1.766244] usb 9-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.766448] usb 9-3: SerialNumber: 01680000EA164101
[ 1.766811] usb 9-3: usb_probe_device
[ 1.766813] usb 9-3: configuration #1 chosen from 1 choice
[ 1.767184] usb 9-3: Successful Endpoint Configure command
[ 1.769035] usb 9-3: adding 9-3:1.0 (config #1, interface 0)
[ 1.769151] usb 9-3: adding 9-3:1.1 (config #1, interface 1)
[ 1.769235] usb 9-3: adding 9-3:1.2 (config #1, interface 2)
[ 1.769319] drivers/usb/core/inode.c: creating file '002'
[ 1.839142] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.839356] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.842219] ata3.00: ATA-7: WDC WD800JD-60MSA1, 10.01E01, max UDMA/100
[ 1.842409] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.845224] ata3.00: configured for UDMA/100
[ 1.845509] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-60MS 10.0 PQ: 0 ANSI: 5
[ 1.846269] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.846424] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.846925] sd 2:0:0:0: [sda] Write Protect is off
[ 1.847126] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.847148] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.847605] sda: sda1 sda2 < sda5 >
[ 1.887209] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.887440] Freeing unused kernel memory: 564k freed
[ 1.887767] Write protecting the kernel read-only data: 12288k
[ 1.888237] Freeing unused kernel memory: 1772k freed
[ 1.889027] Freeing unused kernel memory: 1156k freed
[ 1.937197] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.265647] PM: Starting manual resume from disk
[ 2.265834] PM: Resume from partition 8:5
[ 2.265835] PM: Checking hibernation image.
[ 2.266002] PM: Error -22 checking image file
[ 2.266003] PM: Resume from disk failed.
[ 2.270875] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.270879] PM: Basic memory bitmaps created
[ 2.285230] PM: Basic memory bitmaps freed
[ 2.327630] kjournald starting. Commit interval 5 seconds
[ 2.327667] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 2.454032] usb usb3: suspend_rh (auto-stop)
[ 2.454052] usb usb4: suspend_rh (auto-stop)
[ 2.454070] usb usb5: suspend_rh (auto-stop)
[ 2.454087] usb usb6: suspend_rh (auto-stop)
[ 2.454105] usb usb7: suspend_rh (auto-stop)
[ 2.454123] usb usb8: suspend_rh (auto-stop)
[ 3.613978] udevd version 125 started
[ 4.421461] Linux video capture interface: v2.00
[ 4.481833] pwc: Philips webcam module version 10.0.13 loaded.
[ 4.482042] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 4.482436] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 4.482791] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 4.483152] pwc: Trace options: 0x0001
[ 4.483171] Philips webcam 9-3:1.0: usb_probe_interface
[ 4.483173] Philips webcam 9-3:1.0: usb_probe_interface - got id
[ 4.483174] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.
[ 4.515833] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 4.516894] pwc: Registered as video0.
[ 4.518834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 4.520834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 4.521051] Philips webcam 9-3:1.1: usb_probe_interface
[ 4.521053] Philips webcam 9-3:1.1: usb_probe_interface - got id
[ 4.521058] Philips webcam 9-3:1.2: usb_probe_interface
[ 4.521060] Philips webcam 9-3:1.2: usb_probe_interface - got id
[ 4.521073] usbcore: registered new interface driver Philips webcam
[ 5.508089] Adding 3229028k swap on /dev/sda5. Priority:-1 extents:1 across:3229028k
[ 5.777093] EXT3-fs (sda1): using internal journal
[ 8.389199] e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
[ 8.440062] e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
[ 8.440405] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 9.978906] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 9.979266] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 9.979772] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.957593] usb 9-3: Successful Endpoint Configure command
[ 12.967542] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7ac74000, num_trbs = 10
[ 12.967553] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af8c000, num_trbs = 10
[ 12.985500] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 20.946116] eth1: no IPv6 routers present
[ 40.029279] usb 9-3: Successful Endpoint Configure command
[ 40.039186] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a814000, num_trbs = 10
[ 40.039198] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b734000, num_trbs = 10
[ 40.057195] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 40.216270] usb 9-3: Successful Endpoint Configure command
[ 40.226183] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a9c0000, num_trbs = 10
[ 40.226193] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a98c000, num_trbs = 10
[ 40.245183] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 40.399261] usb 9-3: Successful Endpoint Configure command
[ 40.408210] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a9c0000, num_trbs = 10
[ 40.408220] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a98c000, num_trbs = 10
[ 47.145805] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 48.076894] usb 9-3: Successful Endpoint Configure command
[ 48.086805] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b180000, num_trbs = 10
[ 48.086816] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b47c000, num_trbs = 10
[ 48.105803] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 48.263885] usb 9-3: Successful Endpoint Configure command
[ 48.273796] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7bba0000, num_trbs = 10
[ 48.273807] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af6c000, num_trbs = 10
[ 48.292793] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?
[ 48.446875] usb 9-3: Successful Endpoint Configure command
[ 48.456784] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7bba0000, num_trbs = 10
[ 48.456794] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af6c000, num_trbs = 10
[ 51.778648] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued?

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 009 Device 002: ID 0471:0311 Philips PCVC740K ToUcam Pro [pwc]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0471 Philips
idProduct 0x0311 PCVC740K ToUcam Pro [pwc]
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 1 01680000EA164101
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 490
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0124 1x 292 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x01c0 1x 448 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0250 1x 592 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x02c0 1x 704 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0308 1x 776 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 7
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0348 1x 840 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 8
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0380 1x 896 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 9
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03c0 1x 960 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 10
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03c0 1x 960 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 38
bInCollection 1
baInterfaceNr( 0) 2
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0000
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 2
bSourceID 1
bControlSize 1
bmaControls( 0) 0x03
Mute
Volume
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 2
iTerminal 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 44100
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x005a 1x 90 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x00
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 22050
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x002e 1x 46 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x00
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 11025
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x00
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 8000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x00
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled

Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.34-rc1 xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:03:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled