Re: [PATCH] mfd: Improve WM831x AUXADC completion handling
From: Samuel Ortiz
Date: Fri Apr 02 2010 - 12:26:36 EST
On Fri, Apr 02, 2010 at 04:31:03PM +0100, Mark Brown wrote:
> Currently completion of WM831x AUXADC conversions is monitored by
> checking for convertor enable. Due to the mechanism used to ensure
> data corruption is avoided when reading AUXADC data there may under
> heavy I/O be a window where this bit has cleared but the conversion
> results have not been updated. Data availability is only guaranteed
> after the AUXADC data interrupt has been asserted.
> Avoid this by always using the interrupt to detect completion. If the
> chip IRQ is not set up then we poll the IRQ status register for up to
> 5ms. If it is set up then we rely on the data done interrupt with a
> vastly increased timeout, failing the conversion if the interrupt is
> not generated.
> This also saves a register read when using interrupts.
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Applied to my for-next branch, thanks.
Intel Open Source Technology Centre
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/