RE: BUG: physmap modprobe & rmmod

From: H Hartley Sweeten
Date: Fri Apr 02 2010 - 18:41:41 EST


On Friday, April 02, 2010 3:16 PM, H Hartley Sweeten wrote:
> On Friday, April 02, 2010 2:47 PM, Randy Dunlap wrote:
>>> 2.6.34-rc2 kernel:
>>>
>>> Boot up on a common PC, then: modprobe physmap ; rmmod physmap
>>> and bang.
>
> [snip]
>
>> This is with close to an allmodconfig on x86_64, including:
>>
>> CONFIG_MTD_PHYSMAP=m
>> CONFIG_MTD_PHYSMAP_COMPAT=y
>> CONFIG_MTD_PHYSMAP_START=0x8000000
>> CONFIG_MTD_PHYSMAP_LEN=0
>> CONFIG_MTD_PHYSMAP_BANKWIDTH=2
>
> That's probably the cause of the BUG.
>
> If your not run-time calling physmap_configure(), your resource will
> be created as:
>
> static struct physmap_flash_data physmap_flash_data = {
> .width = CONFIG_MTD_PHYSMAP_BANKWIDTH,
> };
>
> static struct resource physmap_flash_resource = {
> .start = CONFIG_MTD_PHYSMAP_START,
> .end = CONFIG_MTD_PHYSMAP_START + CONFIG_MTD_PHYSMAP_LEN - 1,
> .flags = IORESOURCE_MEM,
> };
>
> In other words:
>
> static struct physmap_flash_data physmap_flash_data = {
> .width = 2,
> };
>
> static struct resource physmap_flash_resource = {
> .start = 0x8000000,
> .end = 0x8000000 + 0 - 1,
> .flags = IORESOURCE_MEM,
> };

I traced this down to kernel/resource.c. When __request_resource
is finally called, because of the platform_device_register, it ends
up returning a conflict due to:

resource_size_t start = new->start;
resource_size_t end = new->end;
struct resource *tmp, **p;

if (end < start)
return root;

This ends up causing an -EBUSY error code. The patch below should
be correct to fix this.

I changed the commit message a bit.

---

mtd/maps/physmap: catch failure to register MTD_PHYSMAP_COMPAT device

If the default Kconfig values are used with MTD_PHYSMAP_COMPAT you end
up with a resource where end < start. This causes __request_resource to
return a conflict which then returns an -EBUSY error code. The current
physmap.c code just assumes that the platfom_device_register will always
succeed.

Catch this failure during the physmap_init and propogate the error.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>

---

diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index d9603f7..426461a 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -264,8 +264,11 @@ static int __init physmap_init(void)

err = platform_driver_register(&physmap_flash_driver);
#ifdef CONFIG_MTD_PHYSMAP_COMPAT
- if (err == 0)
- platform_device_register(&physmap_flash);
+ if (err == 0) {
+ err = platform_device_register(&physmap_flash);
+ if (err)
+ platform_driver_unregister(&physmap_flash_driver);
+ }
#endif

return err;

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/