Re: [PATCH] mm: disallow direct reclaim page writeback

[KOSAKI Motohiro]

> On Wed, Apr 14, 2010 at 12:36:59AM +1000, Dave Chinner wrote:
> > On Tue, Apr 13, 2010 at 08:39:29PM +0900, KOSAKI Motohiro wrote:
> > > > FWIW, the biggest problem here is that I have absolutely no clue on
> > > > how to test what the impact on lumpy reclaim really is. Does anyone
> > > > have a relatively simple test that can be run to determine what the
> > > > impact is?
> > > 
> > > So, can you please run two workloads concurrently?
> > >  - Normal IO workload (fio, iozone, etc..)
> > >  - echo $NUM > /proc/sys/vm/nr_hugepages
> > 
> > What do I measure/observe/record that is meaningful?
> 
> So, a rough as guts first pass - just run a large dd (8 times the
> size of memory - 8GB file vs 1GB RAM) and repeated try to allocate
> the entire of memory in huge pages (500) every 5 seconds. The IO
> rate is roughly 100MB/s, so it takes 75-85s to complete the dd.
> 
> The script:
> 
> $ cat t.sh
> #!/bin/bash
> 
> echo 0 > /proc/sys/vm/nr_hugepages
> echo 3 > /proc/sys/vm/drop_caches
> 
> dd if=/dev/zero of=/mnt/scratch/test bs=1024k count=8000 > /dev/null 2>&1 &
> 
> (
> for i in `seq 1 1 20`; do
>         sleep 5
>         /usr/bin/time --format="wall %e" sh -c "echo 500 > /proc/sys/vm/nr_hugepages" 2>&1
>         grep HugePages_Total /proc/meminfo
> done
> ) | awk '
>         /wall/ { wall += $2; cnt += 1 }
>         /Pages/ { pages[cnt] = $2 }
>         END { printf "average wall time %f\nPages step: ", wall / cnt ;
>                 for (i = 1; i <= cnt; i++) {
>                         printf "%d ", pages[i];
>                 }
>         }'
> ----
> 
> And the output looks like:
> 
> $ sudo ./t.sh
> average wall time 0.954500
> Pages step: 97 101 101 121 173 173 173 173 173 173 175 194 195 195 202 220 226 419 423 426
> $
> 
> Run 50 times in a loop, and the outputs averaged, the existing lumpy
> reclaim resulted in:
> 
> dave@test-1:~$ cat current.txt | awk -f av.awk
> av. wall = 0.519385 secs
> av Pages step: 192 228 242 255 265 272 279 284 289 294 298 303 307 322 342 366 383 401 412 420
> 
> And with my patch that disables ->writepage:
> 
> dave@test-1:~$ cat no-direct.txt | awk -f av.awk
> av. wall = 0.554163 secs
> av Pages step: 231 283 310 316 323 328 336 340 345 351 356 359 364 377 388 397 413 423 432 439
> 
> Basically, with my patch lumpy reclaim was *substantially* more
> effective with only a slight increase in average allocation latency
> with this test case.
> 
> I need to add a marker to the output that records when the dd
> completes, but from monitoring the writeback rates via PCP, they
> were in the balllpark of 85-100MB/s for the existing code, and
> 95-110MB/s with my patch.  Hence it improved both IO throughput and
> the effectiveness of lumpy reclaim.
> 
> On the down side, I did have an OOM killer invocation with my patch
> after about 150 iterations - dd failed an order zero allocation
> because there were 455 huge pages allocated and there were only
> _320_ available pages for IO, all of which were under IO. i.e. lumpy
> reclaim worked so well that the machine got into order-0 page
> starvation.
> 
> I know this is a simple test case, but it shows much better results
> than I think anyone (even me) is expecting...

Ummm...

Probably, I have to say I'm sorry. I guess my last mail give you
a misunderstand.
To be honest, I'm not interest this artificial non fragmentation case.
The above test-case does 1) discard all cache 2) fill pages by streaming
io. then, it makes artificial "file offset neighbor == block neighbor == PFN neighbor"
situation. then, file offset order writeout by flusher thread can make
PFN contenious pages effectively.

Why I dont interest it? because lumpy reclaim is a technique for
avoiding external fragmentation mess. IOW, it is for avoiding worst
case. but your test case seems to mesure best one.



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/