Re: [RFC][PATCH v4 00/18] Provide a zero-copy method on KVMvirtio-net.

[Michael S. Tsirkin]

On Sun, Apr 25, 2010 at 05:20:06PM +0800, xiaohui.xin@xxxxxxxxx wrote:
> We provide an zero-copy method which driver side may get external
> buffers to DMA. Here external means driver don't use kernel space
> to allocate skb buffers. Currently the external buffer can be from
> guest virtio-net driver.
> 
> The idea is simple, just to pin the guest VM user space and then
> let host NIC driver has the chance to directly DMA to it. 
> The patches are based on vhost-net backend driver. We add a device
> which provides proto_ops as sendmsg/recvmsg to vhost-net to
> send/recv directly to/from the NIC driver. KVM guest who use the
> vhost-net backend may bind any ethX interface in the host side to
> get copyless data transfer thru guest virtio-net frontend.
> 
> patch 01-12:  	net core changes.
> patch 13-17:  	new device as interface to mantpulate external buffers.
> patch 18: 	for vhost-net.
> 
> The guest virtio-net driver submits multiple requests thru vhost-net
> backend driver to the kernel. And the requests are queued and then
> completed after corresponding actions in h/w are done.
> 
> For read, user space buffers are dispensed to NIC driver for rx when
> a page constructor API is invoked. Means NICs can allocate user buffers
> from a page constructor. We add a hook in netif_receive_skb() function
> to intercept the incoming packets, and notify the zero-copy device.
> 
> For write, the zero-copy deivce may allocates a new host skb and puts
> payload on the skb_shinfo(skb)->frags, and copied the header to skb->data.
> The request remains pending until the skb is transmitted by h/w.
> 
> Here, we have ever considered 2 ways to utilize the page constructor
> API to dispense the user buffers.
> 
> One:	Modify __alloc_skb() function a bit, it can only allocate a 
> 	structure of sk_buff, and the data pointer is pointing to a 
> 	user buffer which is coming from a page constructor API.
> 	Then the shinfo of the skb is also from guest.
> 	When packet is received from hardware, the skb->data is filled
> 	directly by h/w. What we have done is in this way.
> 
> 	Pros:	We can avoid any copy here.
> 	Cons:	Guest virtio-net driver needs to allocate skb as almost
> 		the same method with the host NIC drivers, say the size
> 		of netdev_alloc_skb() and the same reserved space in the
> 		head of skb. Many NIC drivers are the same with guest and
> 		ok for this. But some lastest NIC drivers reserves special
> 		room in skb head. To deal with it, we suggest to provide
> 		a method in guest virtio-net driver to ask for parameter
> 		we interest from the NIC driver when we know which device 
> 		we have bind to do zero-copy. Then we ask guest to do so.
> 		Is that reasonable?

Do you still do this?

> Two:	Modify driver to get user buffer allocated from a page constructor
> 	API(to substitute alloc_page()), the user buffer are used as payload
> 	buffers and filled by h/w directly when packet is received. Driver
> 	should associate the pages with skb (skb_shinfo(skb)->frags). For 
> 	the head buffer side, let host allocates skb, and h/w fills it. 
> 	After that, the data filled in host skb header will be copied into
> 	guest header buffer which is submitted together with the payload buffer.
> 
> 	Pros:	We could less care the way how guest or host allocates their
> 		buffers.
> 	Cons:	We still need a bit copy here for the skb header.
> 
> We are not sure which way is the better here. This is the first thing we want
> to get comments from the community. We wish the modification to the network
> part will be generic which not used by vhost-net backend only, but a user
> application may use it as well when the zero-copy device may provides async
> read/write operations later.

I commented on this in the past. Do you still want comments?

> Please give comments especially for the network part modifications.
> 
> 
> We provide multiple submits and asynchronous notifiicaton to 
> vhost-net too.
> 
> Our goal is to improve the bandwidth and reduce the CPU usage.
> Exact performance data will be provided later. But for simple
> test with netperf, we found bindwidth up and CPU % up too,
> but the bindwidth up ratio is much more than CPU % up ratio.
> 
> What we have not done yet:
> 	packet split support
> 	To support GRO
> 	Performance tuning
> 
> what we have done in v1:
> 	polish the RCU usage
> 	deal with write logging in asynchroush mode in vhost
> 	add notifier block for mp device
> 	rename page_ctor to mp_port in netdevice.h to make it looks generic
> 	add mp_dev_change_flags() for mp device to change NIC state
> 	add CONIFG_VHOST_MPASSTHRU to limit the usage when module is not load
> 	a small fix for missing dev_put when fail
> 	using dynamic minor instead of static minor number
> 	a __KERNEL__ protect to mp_get_sock()
> 
> what we have done in v2:
> 	
> 	remove most of the RCU usage, since the ctor pointer is only
> 	changed by BIND/UNBIND ioctl, and during that time, NIC will be
> 	stopped to get good cleanup(all outstanding requests are finished),
> 	so the ctor pointer cannot be raced into wrong situation.
> 
> 	Remove the struct vhost_notifier with struct kiocb.
> 	Let vhost-net backend to alloc/free the kiocb and transfer them
> 	via sendmsg/recvmsg.
> 
> 	use get_user_pages_fast() and set_page_dirty_lock() when read.
> 
> 	Add some comments for netdev_mp_port_prep() and handle_mpassthru().
> 
> what we have done in v3:
> 	the async write logging is rewritten 
> 	a drafted synchronous write function for qemu live migration
> 	a limit for locked pages from get_user_pages_fast() to prevent Dos
> 	by using RLIMIT_MEMLOCK
> 	
> 
> what we have done in v4:
> 	add iocb completion callback from vhost-net to queue iocb in mp device
> 	replace vq->receiver by mp_sock_data_ready()
> 	remove stuff in mp device which access structures from vhost-net
> 	modify skb_reserve() to ignore host NIC driver reserved space
> 	rebase to the latest vhost tree
> 	split large patches into small pieces, especially for net core part.
> 	
> 		
> performance:
> 	using netperf with GSO/TSO disabled, 10G NIC, 
> 	disabled packet split mode, with raw socket case compared to vhost.
> 
> 	bindwidth will be from 1.1Gbps to 1.7Gbps
> 	CPU % from 120%-140% to 140%-160%

That's nice. The thing to do is probably to enable GSO/TSO
and see what we get this way. Also, mergeable buffer support
was recently posted and I hope to merge it for 2.6.35.
You might want to take a look.

-- 
MST
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/