Re: [PATCH 1/5] sched: fix capacity calculations for SMT4

[Michael Neuling]

In message <1271426308.1674.429.camel@laptop> you wrote:
> On Wed, 2010-04-14 at 14:28 +1000, Michael Neuling wrote:
> 
> > > Right, so I suspect this will indeed break some things.
> > > 
> > > We initially allowed 0 capacity for when a cpu is consumed by an RT task
> > > and there simply isn't much capacity left, in that case you really want
> > > to try and move load to your sibling cpus if possible.
> > 
> > Changing the CPU power based on what tasks are running on them seems a
> > bit wrong to me.  Shouldn't we keep those concepts separate?
> 
> Well the thing cpu_power represents is a ratio of compute capacity
> available to this cpu as compared to other cpus. By normalizing the
> runqueue weights with this we end up with a fair balance.
> 
> The thing to realize here is that this is solely about SCHED_NORMAL
> tasks, SCHED_FIFO/RR (or the proposed DEADLINE) tasks do not care about
> fairness and available compute capacity.
> 
> So if we were to ignore RT tasks, you'd end up with a situation where,
> assuming 2 cpus and 4 equally weighted NORMAL tasks, and 1 RT task, the
> load-balancer would give each cpu 2 NORMAL tasks, but the tasks that
> would end up on the cpu the RT tasks would be running on would not run
> as fast -- is that fair?
> 
> Since RT tasks do not have a weight (FIFO/RR have no limit at all,
> DEADLINE would have something equivalent to a max weight), it is
> impossible to account them in the normal weight sense.
> 
> Therefore the current model takes them into account by lowering the
> compute capacity according to their (avg) cpu usage. So if the RT task
> would consume 66% cputime, we'd end up with a situation where the cpu
> running the RT task would get 1 NORMAL task, and other cpu would have
> the remaining 3, that way they'd all get 33% cpu.
> 
> > > However you're right that this goes awry in your case.
> > > 
> > > One thing to look at is if that 15% increase is indeed representative
> > > for the power7 cpu, it having 4 SMT threads seems to suggest there was
> > > significant gains, otherwise they'd not have wasted the silicon.
> > 
> > There are certainly, for most workloads, per core gains for SMT4 over
> > SMT2 on P7.  My kernels certainly compile faster and that's the only
> > workload anyone who matters cares about.... ;-)
> 
> For sure ;-)
> 
> Are there any numbers available on how much they gain? It might be worth
> to stick in real numbers instead of this alleged 15%.
> 
> > > One thing we could look at is using the cpu base power to compute
> > > capacity from. We'd have to add another field to sched_group and store
> > > power before we do the scale_rt_power() stuff.
> > 
> > Separating capacity from what RT tasks are running seems like a good
> > idea to me.
> 
> Well, per the above we cannot fully separate them.
> 
> > This would fix the RT issue, but it's not clear to me how you are
> > suggesting fixing the rounding down to 0 SMT4 issue.  Are you suggesting
> > we bump smt_gain to say 2048 + 15%?  Or are you suggesting we separate
> > the RT tasks out from capacity and keep the max(1, capacity) that I've
> > added?  Or something else?
> 
> I would think that 4 SMT threads are still slower than two full cores,
> right? So cpu_power=2048 would not be appropriate.
> 
> > Would another possibility be changing capacity a scaled value (like
> > cpu_power is now) rather than a small integer as it is now.  For
> > example, a scaled capacity of 1024 would be equivalent to a capacity of
> > 1 now.  This might enable us to handle partial capacities better?  We'd
> > probably have to scale a bunch of nr_running too.  
> 
> Right, so my proposal was to scale down the capacity divider (currently
> 1024) to whatever would be the base capacity for that cpu. Trouble seems
> to be that that makes group capacity a lot more complex, as you would
> end up needing to average all the cpu's their base capacity.
> 
> 
> Hrmm, my brain seems muddled but I might have another solution, let me
> ponder this for a bit..
> 

Peter,

Did you manage to get anywhere on this capacity issue?

Mikey
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/