Re: [PATCH 2/3] power/ds2760_battery: make charge_now andcharge_full writeable

[Anton Vorontsov]

On Tue, May 11, 2010 at 07:28:59PM +0200, Daniel Mack wrote:
[...]
> > 1. Could you at least change this back to
> >    POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, so it'll be clear what
> >    exactly this prop is actually changing, and
> 
> Do you see any other way to store the actual rated capacity (not the one
> the battery had in its good days) inside the chip?

In that case it should be indeed POWER_SUPPLY_PROP_CHARGE_FULL,
which is full_active_uAh, which we get from di->raw[DS2760_ACTIVE_FULL]
and di->raw[DS2760_ACTIVE_FULL + 1].

We fall back to deriving it from rated_capacity if full_active
is 0 (your case?):

        /* If the full_active_uAh value is not given, fall back to the rated
         * capacity. This is likely to happen when chips are not part of the
         * battery pack and is therefore not bootstrapped. */
        if (di->full_active_uAh == 0)
                di->full_active_uAh = di->rated_capacity / 1000L;

So, you probably want to make DS2760_ACTIVE_FULL writable, not
DS2760_RATED_CAPACITY.

-- 
Anton Vorontsov
email: cbouatmailru@xxxxxxxxx
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/