Re: [PATCH] matrix_keypad: add support for clustered irq
From: Luotao Fu
Date: Wed May 26 2010 - 10:38:51 EST
Hi Eric,
thankf for the review.
On Wed, May 26, 2010 at 10:29:53PM +0800, Eric Miao wrote:
> On Wed, May 26, 2010 at 9:57 PM, Luotao Fu <l.fu@xxxxxxxxxxxxxx> wrote:
> > This one adds support of a combined irq source for the whole matrix keypad.
> > This can be useful all rows and columns of the keypad is e.g. connected to
> > a GPIO expander, which only has one interrupt line for all events on every
> > single GPIO.
> >
> > Signed-off-by: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
> > ---
> > drivers/input/keyboard/matrix_keypad.c | 80 ++++++++++++++++++++++++++------
> > include/linux/input/matrix_keypad.h | 5 ++
> > 2 files changed, 70 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
> > index b443e08..260dcb0 100644
> > --- a/drivers/input/keyboard/matrix_keypad.c
> > +++ b/drivers/input/keyboard/matrix_keypad.c
> > @@ -87,8 +87,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
> > const struct matrix_keypad_platform_data *pdata = keypad->pdata;
> > int i;
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++)
> > - enable_irq(gpio_to_irq(pdata->row_gpios[i]));
> > + if (pdata->clustered_irq > 0)
> > + enable_irq(pdata->clustered_irq);
> > + else {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + enable_irq(gpio_to_irq(pdata->row_gpios[i]));
> > + }
> > }
> >
> > static void disable_row_irqs(struct matrix_keypad *keypad)
> > @@ -96,8 +100,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
> > const struct matrix_keypad_platform_data *pdata = keypad->pdata;
> > int i;
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++)
> > - disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
> > + if (pdata->clustered_irq > 0)
> > + disable_irq_nosync(pdata->clustered_irq);
> > + else {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
> > + }
> > }
> >
> > /*
> > @@ -226,6 +234,17 @@ static int matrix_keypad_suspend(struct device *dev)
> > matrix_keypad_stop(keypad->input_dev);
> >
> > if (device_may_wakeup(&pdev->dev)) {
> > + if (pdata->clustered_irq > 0) {
> > + unsigned int cirq = pdata->clustered_irq;
> > +
> > + if (enable_irq_wake(cirq) == 0) {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + __set_bit(i, keypad->disabled_gpios);
> > + }
> > +
> > + goto out;
> > + }
> > +
>
> This might deserve a separate function, and what is the usage of disabled_gpios,
> I seem to find nowhere (except in the resume routine).
indeed, will fix. The disable_gpios flag seems to be used to flag an
asleep/awake row/column. It's introduced by the original code. I think
that for the case with single irq I might better use another flag
instead since we have the situaiton "all or none" here and don't have to
mark every single lines.
>
> > for (i = 0; i < pdata->num_row_gpios; i++) {
> > if (!test_bit(i, keypad->disabled_gpios)) {
> > unsigned int gpio = pdata->row_gpios[i];
> > @@ -235,7 +254,7 @@ static int matrix_keypad_suspend(struct device *dev)
> > }
> > }
> > }
> > -
> > +out:
> > return 0;
> > }
> >
> > @@ -247,6 +266,17 @@ static int matrix_keypad_resume(struct device *dev)
> > int i;
> >
> > if (device_may_wakeup(&pdev->dev)) {
> > + if (pdata->clustered_irq > 0) {
> > + unsigned int cirq = pdata->clustered_irq;
> > +
> > + if (disable_irq_wake(cirq) == 0) {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + clear_bit(i, keypad->disabled_gpios);
> > + }
> > +
> > + goto out;
> > + }
> > +
>
> Better a separate routine.
>
> > for (i = 0; i < pdata->num_row_gpios; i++) {
> > if (test_and_clear_bit(i, keypad->disabled_gpios)) {
> > unsigned int gpio = pdata->row_gpios[i];
> > @@ -256,6 +286,7 @@ static int matrix_keypad_resume(struct device *dev)
> > }
> > }
> >
> > +out:
> > matrix_keypad_start(keypad->input_dev);
> >
> > return 0;
> > @@ -296,17 +327,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
> > gpio_direction_input(pdata->row_gpios[i]);
> > }
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++) {
> > - err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
> > + if (pdata->clustered_irq > 0) {
> > + err = request_irq(pdata->clustered_irq,
> > matrix_keypad_interrupt,
> > - IRQF_DISABLED |
> > - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> > + pdata->clustered_irq_flags,
> > "matrix-keypad", keypad);
> > if (err) {
> > dev_err(&pdev->dev,
> > - "Unable to acquire interrupt for GPIO line %i\n",
> > - pdata->row_gpios[i]);
> > - goto err_free_irqs;
> > + "Unable to acquire clustered interrupt\n");
> > + goto err_free_rows;
> > + }
> > + } else {
> > + for (i = 0; i < pdata->num_row_gpios; i++) {
> > + err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
> > + matrix_keypad_interrupt,
> > + IRQF_DISABLED |
> > + IRQF_TRIGGER_RISING |
> > + IRQF_TRIGGER_FALLING,
> > + "matrix-keypad", keypad);
> > + if (err) {
> > + dev_err(&pdev->dev,
> > + "Unable to acquire interrupt "
> > + "for GPIO line %i\n",
> > + pdata->row_gpios[i]);
> > + goto err_free_irqs;
> > + }
>
> Ditto.
>
> > }
> > }
> >
> > @@ -418,11 +463,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
> >
> > device_init_wakeup(&pdev->dev, 0);
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++) {
> > - free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
> > - gpio_free(pdata->row_gpios[i]);
> > + if (pdata->clustered_irq > 0) {
> > + free_irq(pdata->clustered_irq, keypad);
> > + } else {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
> > }
> >
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + gpio_free(pdata->row_gpios[i]);
> > +
> > for (i = 0; i < pdata->num_col_gpios; i++)
> > gpio_free(pdata->col_gpios[i]);
> >
> > diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
> > index c964cd7..8e8dc2e 100644
> > --- a/include/linux/input/matrix_keypad.h
> > +++ b/include/linux/input/matrix_keypad.h
> > @@ -63,6 +63,11 @@ struct matrix_keypad_platform_data {
> > /* key debounce interval in milli-second */
> > unsigned int debounce_ms;
> >
> > + /* used if interrupts of all row/column GPIOs are bundled to one single
> > + * irq */
> > + unsigned int clustered_irq;
> > + unsigned int clustered_irq_flags;
> > +
> > bool active_low;
> > bool wakeup;
> > bool no_autorepeat;
> > --
> > 1.7.0
> >
> >
>
> Otherwise looks OK to me.
Thanks
cheers
Luotao Fu
--
Pengutronix e.K. | Dipl.-Ing. Luotao Fu |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: Digital signature