Re: [PATCH 1/2] mmc: make sdhci work with ricoh mmc controller

[Philip Langdale]

On Mon,  7 Jun 2010 00:28:50 +0300, Maxim Levitsky
<maximlevitsky@xxxxxxxxx> wrote:
> The current way of disabling it is not well tested by vendor
> and has all kinds of bugs that show up on resume from ram/disk.
> 
> Old way of disabling is still supported by
> continuing to use CONFIG_MMC_RICOH_MMC.
> 
> Based on
> 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html'
> Most of the credit for this goes to Andrew de Quincey
> 
> 
> Signed-off-by: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
> CC: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
> CC: linux-mmc@xxxxxxxxxxxxxxx <linux-mmc@xxxxxxxxxxxxxxx>

ACK with one change to add a #define for the device ID.

> ---
>  drivers/mmc/host/sdhci-pci.c |   31 +++++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci.c     |    3 ++-
>  drivers/mmc/host/sdhci.h     |    4 ++++
>  3 files changed, 37 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
> index 65483fd..c4bcaeb 100644
> --- a/drivers/mmc/host/sdhci-pci.c
> +++ b/drivers/mmc/host/sdhci-pci.c
> @@ -17,6 +17,7 @@
>  #include <linux/pci.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/slab.h>
> +#include <linux/device.h>
>  
>  #include <linux/mmc/host.h>
>  
> @@ -84,7 +85,21 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
>  	if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG ||
>  	    chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
>  		chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
> +	return 0;
> +}
> +
> +static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
> +{
> +	slot->host->caps =
> +		((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
> +			& SDHCI_TIMEOUT_CLK_MASK) |
>  
> +		((0x21 << SDHCI_CLOCK_BASE_SHIFT)
> +			& SDHCI_CLOCK_BASE_MASK) |
> +
> +		SDHCI_TIMEOUT_CLK_UNIT |
> +		SDHCI_CAN_VDD_330 |
> +		SDHCI_CAN_DO_SDMA;
>  	return 0;
>  }

As we discussed, highspeed works. Of course, sdhci never sets the MMC
highspeed flag so the cap is irrelevant. We'd need another quirk to
indicate highspeed MMC is supported.

This can be done in a separate patch.

> @@ -95,6 +110,14 @@ static const struct sdhci_pci_fixes sdhci_ricoh = {
>  			  SDHCI_QUIRK_CLOCK_BEFORE_RESET,
>  };
>  
> +static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
> +	.probe_slot	= ricoh_mmc_probe_slot,
> +	.quirks		= SDHCI_QUIRK_32BIT_DMA_ADDR |
> +			  SDHCI_QUIRK_CLOCK_BEFORE_RESET |
> +			  SDHCI_QUIRK_NO_CARD_NO_RESET |
> +			  SDHCI_QUIRK_MISSING_CAPS
> +};
> +
>  static const struct sdhci_pci_fixes sdhci_ene_712 = {
>  	.quirks		= SDHCI_QUIRK_SINGLE_POWER_WRITE |
>  			  SDHCI_QUIRK_BROKEN_DMA,
> @@ -374,6 +397,14 @@ static const struct pci_device_id pci_ids[]
> __devinitdata = {
>  	},
>  
>  	{
> +		.vendor         = PCI_VENDOR_ID_RICOH,
> +		.device         = 0x843,
> +		.subvendor      = PCI_ANY_ID,
> +		.subdevice      = PCI_ANY_ID,
> +		.driver_data    = (kernel_ulong_t)&sdhci_ricoh_mmc,
> +	},
> +
> +	{

It seems we generally want to add a #define for the device ID.
The ENE device below has one.

>  		.vendor		= PCI_VENDOR_ID_ENE,
>  		.device		= PCI_DEVICE_ID_ENE_CB712_SD,
>  		.subvendor	= PCI_ANY_ID,
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index c6d1bd8..483b78e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1687,7 +1687,8 @@ int sdhci_add_host(struct sdhci_host *host)
>  			host->version);
>  	}
>  
> -	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> +	caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
> +		sdhci_readl(host, SDHCI_CAPABILITIES);
>  
>  	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
>  		host->flags |= SDHCI_USE_SDMA;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index c846813..b1839a3 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -240,6 +240,8 @@ struct sdhci_host {
>  #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
>  /* Controller cannot support End Attribute in NOP ADMA descriptor */
>  #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
> +/* Controller is missing device caps. Use caps provided by host */
> +#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
>  
>  	int			irq;		/* Device IRQ */
>  	void __iomem *		ioaddr;		/* Mapped address */
> @@ -292,6 +294,8 @@ struct sdhci_host {
>  
>  	struct timer_list	timer;		/* Timer for timeouts */
>  
> +	unsigned int		caps;		/* Alternative capabilities */
> +
>  	unsigned long		private[0] ____cacheline_aligned;
>  };

--phil
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/