Re: [PATCH] i2c/mips: Fix error return codes from Sibyte i2c busdriver

[Jean Delvare]

Hi Guenter,

On Sun, 20 Jun 2010 10:57:53 -0700, Guenter Roeck wrote:
> Sibyte i2c bus driver returns non-descriptive error values.
> Update to return error values as defined in Documentation/i2c/fault-codes.
> 
> Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-sibyte.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
> index 3d76a18..329cbee 100644
> --- a/drivers/i2c/busses/i2c-sibyte.c
> +++ b/drivers/i2c/busses/i2c-sibyte.c
> @@ -94,7 +94,7 @@ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
>  		}
>  		break;
>  	default:
> -		return -1;      /* XXXKW better error code? */
> +		return -EOPNOTSUPP;
>  	}
>  
>  	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
> @@ -104,7 +104,7 @@ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
>  	if (error & M_SMB_ERROR) {
>  		/* Clear error bit by writing a 1 */
>  		csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
> -		return -1;      /* XXXKW better error code? */
> +		return -ENXIO;
>  	}
>  
>  	if (data_bytes == 1)

Definitely an improvement. However, returning -ENXIO on all errors
seems wrong. This error value should only be returned on missing ack
from the slave on address byte. Isn't it possible to distinguish
between different error kinds? M_SMB_ERROR_TYPE seems promising, but
one would need to look up the datasheet (which I don't have) to
discover its meaning.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/